AutoDesk Smoke :: XML Import - Connected But Shows No Video
Aug 15, 2012When I import the xml it says connected but shows no video.
View 7 Replies
ADVERTISEMENT
AutoDesk Smoke :: Import Media - Audio And Video Locked
Dec 5, 2013New update seems to have caused any QT with audio and video to be locked together....ie if I lift the video, it'll lift the audio, or if I apply an effect to audio, the video becomes unrendered, where previously it wasn't. Used to be able to modify or edit without V&A locked together.....
smoke2014advsp2
AutoDesk Smoke :: Cannot Successfully Import Clips Via Gateway Import
Jan 21, 2012I can tell you cannot Gateway Import from a drive that is Read-Only. The clip seems to work, it just says pending render, of course when you import a large number of files it always says pending render. Unfortunately it never actually finishes pending render, and will list as failed in Backburner.
So you can for instance think you have relinked an entire timeline and start doing a fair amount of work on it, but you will then be unable to send this large timeline to your flame like you think.
There is no god damned reason it should allow you to gateway import something that you cannot actually gateway import. All it would need to do is check if the drive is read only before it does it and give you an error message IN THE APPLICATION. Rather than everything looking fine, but then making you go tease the meaning out of this from backburner:
smk001 1896942624 swBIOSubJobServer.C:298 01/21/12:18:14:05.450 1896942624 swBIOAdapter.C:403 01/21/12:18:14:06.504 Cannot process tasks 0... in /var/tmp/WireJob/SubJob0.
Read-only file system on processing S+W server..The fact that the color correct house had randomly given me an NTFS drive this time didn't occur to me for quite awhile, since the last two were both macOS.
AutoDesk Smoke :: Video GFX Dropped Frames?
Jul 25, 2013I am on a retina Macbook Pro. I am dropping frames. I ran the debug, and they are being dropped by grx, not the disk.1080 29.97 project. all fx are rendered.
View 6 Replies View RelatedAutoDesk Smoke :: Rendered Video Stutters?
Jan 21, 2013I'm using a new iMac and Pegasus R6. If I put 1080 ProRes footage on the timeline it plays fine with the unrendered resize on it. Resize is only changing bit depth. The minute I render the clip, it will no longer play without dropping so many frames that it is unusable.
View 3 Replies View RelatedAutoDesk Smoke :: Mute A Video Element Only?
Sep 1, 2011I know we can mute a complete video layer. But how to mute a videoclip (element) on the timeline? Just imagine I have 4 versions of all shots each in one layer and I want to play the timeline like this:
from the first cut shot no1 in layer 1, from the next cut shot no3 in layer3, from the next cut shot no2 in layer2, etc etc ... and the director wants to see 10 combinations ASAP in FCP I can mute an element...
AutoDesk Smoke :: No Video In Axis Tracker
Jan 16, 2013When I enter Stabilize/Track through the Axis editor I arrive at a blank viewer screen with no footage. I get tracker target boxes, but no footage to track. Stabilizer/Stabilize works fine, but the tracker does not seem to work.
View 3 Replies View RelatedAutoDesk Smoke :: Why Can't See Video On Lower Tracks
Nov 8, 2013I've got an issue seeing video on video track 1 when I have something on a track above it. I have video on track 1, and above that I have a gap with a text fx placed on it (it's a lower third name key). The track indicator is located on the track with the text fx (see the attached "timeline" shot), yet all I see is that key without seeing the video below it (see attached "canvas") Everything has been rendered, so I don't understand what's wrong. And when I export the timeline, the black remains.
View 6 Replies View RelatedAutoDesk Smoke :: 2013 - All Video Clips Are Black?
Sep 19, 2012Whenever we try to import video clips they show up as all black. The length of the video is there, so it might be 15 minutes of black. But no matter what video (Sony, Red, etc.) it's all the same.
We're running pre-release 3 on the latest iMac. As far as we know the graphics card is compatible.
AutoDesk Smoke :: How To Delay Computer Monitor Video
May 22, 2012In our edit suite we have the usual video delay from the output of the Kona card through the suites monitors. We also have an audio delay box to correct for this. Our client monitors are all in sync. In Final Cut there is a control to delay the computer monitor video to have it in sync with the rest of the system. In Smoke we cannot find a similar delay. We see the audio delay in preferences but that changes the wrong offset. how to adjust the computer monitor delay so we are all in sync?
View 5 Replies View RelatedAutoDesk Smoke :: Imported AAF - Audio Separate From Video
Jun 21, 2012I imported an AAF from Premiere Pro and the media came in separately from the video. So I have a video clip and a separate audio clip instead of the two together. Is this because I chose "Save Sources Separately"?
View 6 Replies View RelatedAutoDesk Smoke :: Exporting Video - No File Created
Apr 6, 2013I have tried exporting a video several times now and it simply won't. The first time the export got interrupted, then after that it processed the audio mixdown but none of the frames. At first it made files in the specified location that just wouldn't play, but the last few times no file was created.
View 5 Replies View RelatedAutoDesk Smoke :: Second Version Offline Video In CFX And Action
Nov 29, 2012If I am working on a timeline with my main video track, and I am using a second version for my offline reference footage (So online footage is on V1, offline footage on the V2.1 track), when I go into the Axis effect editor or CFX editor, how can I preview my offline footage as a layer so I can check alignment. For example, I may be doing a split screen effect or reposition within Axis or CFX, but I need to see my offline reference so I can have a baseline for my effects.
View 6 Replies View RelatedAutoDesk Smoke :: Audio / Video Keyword Mismatch?
Jul 16, 2013I am currently trying to set my audio to coreaudio line out, and video to my kona.
I quit smoke, changed to coreaudio in the smoke setup, hit apply, and then quit the app. when I restart smoke it tells me that it is disabling the audio output due to an audio / video mismatch.
Below I have three screen shots. The error message, my system sound panel, and the smoke setup window. Why I am geting this error?
I'm running 10.8.4 with a kona 3g, and smoke 2013 ext1
AutoDesk Smoke :: EXR Look Different On Import
Nov 14, 2011I have RED footage which I exported as EXR. When I import them back in, they look exactly like the RED footage. But when I import the EXR in Fusion, export it back out, and then import that EXR into Smoke, it looks brighter, although I didn't change anything in Fusion. (when I compare the EXR from Smoke and the EXR from fusion in my finder on my desktop, they look exactly the same). So what is Smoke doing with the "foreign" exr on import?I was also playing with the LUT settings. I get a result which is close, but I need to be exact.
View 6 Replies View RelatedAutoDesk Smoke :: How To Import XML
Jul 7, 2013I am having issues for a long time regarding importing XML into smoke 2013. Will try and explain you in breif.
First When we try an import XML into smoke it just doesnt do anything, in the message history box it comes up saying FOUND 0 SOURCES.
Nothing gets imported at all. No footage is imported, nothing is shown in timeline as well.
Second For a different project when the XML does get imported, the videos get imported but then again nothing is coming up in the timeline and in the message history box we get the following error.
XML Validation Failed.
Cannot process unliked media.
we have checked all the import options to make this work, including max up level and the rest but nothing is working.
AutoDesk Smoke :: Get Both Video Monitor And External Display From Macbook Pro?
May 23, 2013I'm just about to order a BM card for video monitoring but looking for connection setup that allows me to get both video monitor and external display from my macbook pro?
View 2 Replies View RelatedAutoDesk Smoke :: 2012 / DlVideo Error / No Video List
Feb 4, 2012I'm attempting to get Smoke 2012 SP1 running on Mac OS X 10.7.2. After installation, I cannot get the application to launch -- instead I get a "DlVideo Error: No video list" error and then exit.
Hardware specs are attached, in short 2 x 6 core Mac Pro, 24GB RAM, Quadro FX 4800 and Kona 3G. This is built on a clean install of 10.7.2 using the Apple video driver for the 4800. The display is an Eizo ColorEdge CG303W, attached to the 4800.
I would like to install the 4.1.28 CUDA drivers to enable the Mercury playback engine (as this machine will probably also run Premiere Pro), however I'm trying to keep it as simple as possible until I can get Smoke running.
A Euphonix MC Transport and MC Color will be added to the station, however they are not currently attached.
My workstation name is bc118-s001. I'm using an external license server (macnv3), which is running properly.
Storage is currently set to the local disk, which I know is sub-optimal. Ultimately the storage volume will be a fiber-attached TerraBlock 24D, however I'm upgrading that device from 4.6.4 to 5 before I put the unit into production, and would rather not store any data on it before the upgrade.
I've attached the application and shell logs for your reference. The following lines are only the errors from the app.log:
bc118-s001:~ itservices$ less ~/Desktop/smoke201211_bc118-s001_app.log | grep -i error
2074786144 project.C:4713 02/04/12:11:36:35.936 PRJMGT : Load Project, failed to switch to group users
2074786144 video.C:1068 02/04/12:11:36:41.379 VIDEO: non-standard monitor refresh rate (0.000000). Audio/Video playback may not be in sync.
2074786144 EuTop.C:65 02/04/12:11:36:41.467 Control Surfaces : Initialisation failed (error 46)
2074786144 error.C:332 02/04/12:11:36:42.950 ERROR: DlVideo Error: No video list
2074786144 error.C:110 02/04/12:11:36:42.950 DlVideo Error: No video list
2074786144 messageAccumulator.C:268 02/04/12:11:36:42.959 Error: DlVideo Error: No video list (Press ESC)
I notice that the monitor refresh rate is not being detected properly, however the OS seems to detect it properly.
These lines are the errors from the shell.log:
bc118-s001:~ itservices$ less ~/Desktop/smoke201211_bc118-s001_shell.log | grep -i error
Feb 04 11:36:42 : ERROR: DlVideo Error: No video list
Feb 04 11:36:42 : DlVideo Error: No video list
AutoDesk Smoke :: Transform Color Video Without Affecting CFX Text
Mar 7, 2014How can i transform and color a video without affecting cfx Text with any movement or color . I'm working on a stereoscopic project.
View 1 Replies View RelatedAutoDesk Smoke :: Merge Audio With Video And Create A Clip?
Dec 16, 2012Any tips for synching audio with on-camera reference mic? Also, once synched in timeline, is it possible to merge audio with video and create a clip that can be organized in media hub/bins?
View 2 Replies View RelatedAutoDesk Smoke :: Slow Motion Editing Music Video
Apr 5, 2012I'm editing a music video, when apply time warp a one shot for example 25% for slow motion , the shot repeat the last frame, 4 frames.
View 4 Replies View RelatedAutoDesk Smoke :: Import EXR With Z Channel
Feb 28, 2012I'm not sure if the smoke on mac software handles exr with rgb and z pass, but using wiretap to import exr, I get this error. The file was 16bit FP with and without zipline compression
How to import exr with multiple passes to smoke on mac?
AutoDesk Smoke :: How To Import FBX Camera
Oct 19, 2012I tried to import a FBX camera from Mocha v3 and noticed that there is no FBX selection under the Object Tab in Action. Is that coming on the next Pre-Release?
View 1 Replies View RelatedAutoDesk Smoke :: Import PSD Into CFX Schematic?
Nov 26, 2012i can import the .psd using mediahub or desktop import or in action bin, i can use 'import' node. But i want to spot importing psd file directly from cfx schematic using 'read file' node in I/O tab. I will get one single file . I believe this node is containing multiple information (channels/layers). How can i extract the layers from that node ? how can i make this node usable since i can't make any connection to other node. Like in Nuke , there's a node named 'shuffle' which can extract or pull out a selected channel/layers from a single node. How to do this in cfx schematic ?
Talking about 'shuffle' node in Nuke. Is there any node similar to that? so the node not only can pull/extract channels but also can 'shuffle' or re-pipe the channel . For example pipe chan Red to chan Green, or Alpha to Red etc. What is the best way to do this ? do i have to use CC module ? any similar node in cfx schematic level?
AutoDesk Smoke :: How To Import The Files In 25 Fps
Feb 1, 2013we normally used 1280 resolution clips with 25 fps..
i do settings with 1280 resolution but, when we import the raw footages in media hub its normally import on 50 fps... its really difficult to always check the fps ...we want always to import the files in 25 fps.
is it possible...?
AutoDesk Smoke :: How To Import An AAF From Avid MC6
Jun 26, 2013I'm trying to import an AAF from Avid MC6 into 2013 ext1. I get the message
"Smoke cannot import the AAF file because it is either incompatible or unreadable:
AAF: Error. Missing XML or AAF file.
I went back to 2012 SE2 Sp3 and the same AAF loads perfectly fine (albeit with inaccurate speed ramps). Am I missing something here, or is it broken?
AutoDesk Smoke :: Export Video Segments With Extra Tail And Head
Feb 12, 2013I have a timeline and I want to export each video segment as separate videos with 4 sec extra head and tails.
How do I do this?
AutoDesk Smoke :: Can't Import Graphic Files
Jun 21, 2012I've been unable to import ProRes 422 files son I have to work with the H264 native files, which suck. But now I tried to import a couple of PSDs and a TIFF and they don't appear in the media hub nor can I drag-and-drop'em to the media library.
View 1 Replies View RelatedAutoDesk Smoke :: R3D Import Resolution Incorrect?
Aug 4, 2012I'm trying to import 4K-5K R3D files from an Epic into my 1920x1080 project. Oddly enough, Smac thinks the clips are 1280x675 resolution. Why and how can I get them in at 1080HD or even larger?
View 6 Replies View RelatedAutoDesk Smoke :: XML Import From FCP - Unlinked Media
Aug 25, 2011I've been trying to import a XML from FCP (xml version 2), bun everytime I only get a timeline with unlinked media...
I placed the XML one directory above my media. But when I drag the XML into my library (having Store Local Copy turned on), I only get the "empty" timeline...
When I try to relink my media from the gateway, it's not relinking anything (it says, no video and audio found). Is there no way to import an XML without having to import the original media into my library? Also, no matter what kind of clip I'm importing, it always soft imports my clips, although store local copy is turned on...
Attached is a picture with the settings for my xml import (and on top the unlinked xml, which says SOFT, although, as you can see on the bottom of the screen store local copy is enabled).
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
AutoDesk Smoke :: Import Audio File
Apr 13, 2011I´ve a problem when import all types of audio file, the application crash...but is curios that if I export the file that crash the application (in Lost and found) to the desktop and try import this audio there aren´t problem..import ok...and if this audio is edited with a image and import with import media tool (audio and video) import ok.
Another question about import / export...when a tried export a quick time in the column of status of background tasks appear the message that my "host" does not seem to exist, and not process the quicktime move.