In Adobe Prem Pro, I'm finishing a short film. All, of a sudden I am bringing over one last clip, and I can't get an audio track. So, if I select a clip and drag it over, only the video shows up.
View 5 RepliesI'm running Premiere Pro CS5 on Win7 x64. I have an MP3 audio clip that I've selected a sub-clip from, as you can see here:
When I click on the insert button, everything to the right of the insertion point on the timeline is pushed to the right, as if the clip were inserted, but the clip doesn't show up anywhere (I've scrolled up and down through both the audio and video tracks), as you can see here:
So the option to add Adding Video/Audio Tracks to Timeline are "grey'd out" and what's even more strange is that they don't even have the one or two tracks that are usually in the timeline when you open new project.
View 14 Replies View RelatedI'm having trouble figuring out how to edit multiple audio tracks. I put the clip on the timeline and I can hear both tracks but there is only one audio track showing. How do I seperate the tracks?
One track is from a rhodes external mic with phantom power using XLR. The other is from a powered lavalier mic attached by XLR. Is there something I have to do in project set up?
I recently started to work with the Adobe suit so i am not yet used to the workflow. We are serval people working on the post production of a short movie filmed with a red SCARLET in raw which means that the files are pretty big. The audio where captured in serval tracks who all have been merged with the video clips. The clips have thereafter been cut and placed in its right place. So now it is my job to work with the sound design. I have tryd to export the audio in both AAF and OMF and every time i open it up in Audition it sais that the media is offline. On my computer all i have is the orgininal Audio files. Is there anyway to get only the audio (all the tracks) to Audition, without having them searching for the merged files. For example creating new Audio from the cutted tracks?
View 1 Replies View RelatedI can edit a video, with resynced sound/dialogue in premiere cc. When I save and close the project, everything is okay. When I later reopen the project all or most of the audio tracks are blank. They are there with the right name and length, but no waveform and no sound. I have put them in manually resynced and then on save and close: again they are gone. So there really is no point in editing if I can`t save the result. How can i restore my edits and also why do I have to do so? I have now redone every scene 5 times and I need a solution asap. Autosave keeps the same useless projects.
on Mac Pro, 10Gb Ram, premiere cc.
I tried the pluraleyes extension (as I was using pluraleyes) but this makes no difference.
We are recording in two languages, one in left and the other in right channel. However, in Adobe Premiere Pro we are not able to split the track when we take up for rought cut. Both the tracks are found mixed. Since we need to maintian the split track to dubb into other languages.
View 2 Replies View RelatedMy video material holds two voices that were recorded on CH1 and CH2 in mono, resulting in a stereo clip that has one voice on the left channel and one voice on the right channel. So far I always duplicated the audio clips and use fill right and fill left. I just found out about channel mappings in CS2 and CS3, but for my actual project it is too late since it is cut already. It is my first project I'm doing in CS2 and after it is finished I will install CS3. So my first question is: When I use the channel mapping command, how are the resulting mono channels handled in the master? Will each mono channel fill the right AND the left channel of the stereo master track?
With delight I found out that the channel mixer in CS2 allows to use fill right and fill left effects, so I don't have to drag the effects on each clip separatley.
My second question is regarding the mixing of the two voices. Since we couldn't afford to have a professional sound engenieer at the shoot the channel of the voice that was not talking wasn't turned down, so the second voice will be heard on the other channel when the two people stood close together. Is there a more efficient way to mix the two voices instead of using rubber bands to bring down one voice when it is not talking? It's a hell lot of work.
My video clip, brought over into Premiere CS6 from Final Cut Pro 5, has the usual left and right audio tracks, but in Premiere they are not linked into a stereo pair. Thus the volume level has to be adjusted separately in each track.
In Final Cut, I can quickly convert two independent audio tracks into a stero pair by selecting the tracks and then going to the menu Modify > Stereo Pair. I can't figure out how to do this in Premiere.
When two audio tracks are not linked, the volume level has to be adjusted separately in each track, which wastes time. But after two tracks are linked into a Stereo Pair in Final Cut, adjusting either track adjusts them both, together. That's what I want to do now in Premiere.
So, how do I make two separate audio tracks into a linked Stereo Pair in Premiere?
When i try to drag a clip into the sequence, a prompt comes up saying Adobe Premiere Pro has stopped working!
i have a project due in a few weeks and i cant rely on windows movie maker!
I am running it on a HP Probook 450 with Windows 8.1 64 bit.
I watched a video clip and I liked everything from, let's say the :30 mark to the minute mark. So, I import it into Premiere. However, when I put it at the end of the next clip, it shows the time for the whole sequence. Now, I know that I can do the math, but is there a way to show where the 30 second mark (in this example) is by avoiding doing the calculation? It's do-able, but seems a little tedious. Would like to "reset the clock" so to speak when working on individual clips within the timeline.
View 2 Replies View RelatedI was working on a project last night and without warning, every time I tried to transfer a movie clip to a sequence, the audio stopped coming with the video. The sound definitely works and plays in the upper left hand window, but when transferring the clip to the sequence, the audio did not come with it. Before starting work on the project, I updated Premiere through the Creative Cloud.
This problem has happened before at the beginning of a project, and I have been able to start a new sequence without problems. This morning, however, when I tried a new sequence, the sound would not come in at all. A picture of what my screen looks like when I try to put in a video clip to a sequence is below.
The settings for the audio are the same between the video and the sequence. I definitely don't want to lose the ability to add sound when I get further into my project. What can I do to fix this?
I am new to working with bigger projects in Premiere, I moved from FCP last year. I am currently editing a show which is based of Line recorded cameras.
I have 6 Tracks of video, plus mulitple audio tracks and 2 hrs long
My problem. Having made and lifted my selects in the timeline I now am finding the timeline to be very unresponsive to the point of pinwheeling even just to open the sequence. I can't zoom, move or edit anything in this timeline without a pinwheel and a 30 second delay. None of my other sequences are having this issue. All are the same codec.
Is there a way to set up larger sequences so that this does not happen? I find premiere 7.1 is fine until I build bigger sequences/projects. My inital thought was drive speed, however the issues only arose when I had lifted all the selects.
Could it be that I have too many tracks of video for premiere to handle? I have no problem playing the timeline (although it will initally pinwheel) its mainly navigation/clip selction along the timeline which causes an issue
I tried multicam also but that had too many issues
I work on a 2012 Mac Pro 2.4 Ghz 12-cores with 12 GB ram 9 of which is allocated to premiere. I also have my working caches on a dedicated single 3.5" 7200 rpm drive 1gb graphics card.
I know this can't be done at present but it would be great to be able to see both timeline & clip markers as you work through a sequence of subclips. This is for those that get handed a project where the Markers have been spread across both clip & sequence. Even a merge function based on current location would do?
View 3 Replies View RelatedI am using Premiere CC to edit Pro Res 422 in a sequence using the ARRI Cinema 23.976 sequence preset. My rough cut sequence has lost all audio playback. I can play audio from the source, and in other sequences in the same project but this sequence specifically is not giving my ANY playback. In audio hardware, I have set output to built-in output and made sure that my system is set to the same thing as well. When I click into channel properties, right click>Modify Channel I see 4 audio tracks set to Source Channel 1, 2, 3, 4. All are set as "Ch.1" under Channel in track.
View 7 Replies View RelatedI am having an issue exporting my sequence which contains final AIFF mix (24 bit 48 kHz) into a 'same-as-source' ProRes 422 file with 24 bit audio. I am specifically trying to export media with 'Match Sequence Settings' checked to create an identical output of what my sequence is. I wind up only creating a PR422 with 16 bit audio rather than 24 bit audio.
My sequence contains ProRes 422 media and 24 bit AIFF final stereo mix (1 audio file) from our Sound department.
My sequence is currently setup as "Custom" at 1920x1080, 23.976 fps, Square Pixels, Progressive, etc. Audio is 48 kHz (I don't see an option for choosing different bit rates in the 'Sequence Settings').
Using 'Match Sequence Settings', my options to alter the audio are "greyed out" and unavailable. I'm not sure why 'Match Sequence Settings' doesn't recognize that I am cutting with 24 bit audio and, instead, only exports 16 bit audio.
Trying to insert a clip on a new timeline form a different sequence in my source monitor. But the audio track does not come through.
I am running the latest CC of Premiere on Windows 8.
I'm trying to replace the audio of a clip. I know I can easily delete the audio once it's in a sequence, but I'd like to replace the audio entirely so that the new audio is always on the clip as it's viewed in the project bins. You can edit in Audition for the clip, but thre doesn't seem to be a way to save the changes.
View 3 Replies View RelatedI have a short 5min film for a student film fest, all the audio and visual plays perfectly in the timeline. However, when exported, the last audio clip (which is a 'button' and comes after two soundless title slides) does not play at all. Again, it works perfectly in timeline. All audio files are .WAV and I've tried exporting it in several different fashions, none of which have made a difference.
For the film fest I need to export in 16:9, Apple ProRes 422 (HQ). I tried this, among regular Quick Time export, Vimeo export, and others...every single export the audio on the 'button' didn't play at all but the clip is there.
Side Note: I tried adding low volume audio to bridge the last clip to the button to see if that made a difference so there would be no gaps in the audio timeline, but it did nothing.
This is a daily occurrence. As I go along editing, I inevitably come upon some video clip (or audio clip) on my timeline that is missing it's original audio (or video) counterpart. I've previously deleted the audio portion (or video) at some point earlier in the edit, when it made sense to do so. Now, though, I change my mind, or I need to hear the audio to sync other clips, or just hear the audio for reference, etc.
How do I bring back the corresponding media? I love the new "Join Through Edits" command in Premiere Pro CC, it seems that a companion feature would be something like "Restore Original Linked Audio / Video"
Match Frame seems close to what I need, but involves a few more steps than a right-click, or keyboard shortcut (maybe I don't properly understand how it works). Does any command exist that would do what I'm needing? I can't imagine I'm the only one who would need this function DAILY.
It was working before. Now I can't insert any audio at all. I even tried using some of the video clips that I have already extracted audio from and they no longer work. When I have it up in the source box I can play it and the aeudio is there. But if I ovrwrite the clip or drag the clip it adds the video only with no audio. Even if I try to drag just the audio it won't allow me to put it in any ofc the audio trays. Did I acidentally push a button and turn iaudio off. How do I fix this?
View 1 Replies View RelatedIn Adobe Premiere, I am getting an echo when I change an audio clip's speed/duration. The change is from 100% to 103%. I've tried other values in the speed duration but all create an echo.
View 1 Replies View RelatedAfter selecting 2 (or more) files and right clicking and choosing Multi camera sequence from source, I drag the newly created sequence on to the time line but all I get is the two files on the time line stacked over one another. the sequence never gets created.
View 3 Replies View RelatedI have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
I am wondering if there is another method to control volume levels on the audio and voice over tracks. I am thinking particularly about a method to easily (automatically) reduce the volume of the background music when a voiceover starts and raising it again after the voiceover is finished.
I find the existing process of capturing a volume node fiddly and, for me, a bit hit and miss.
Is there a way to add an additional audio track to either the music track or voice tracks? In other words, instead of one voice track and one music track is there a way to add a third track? I have many sound effects and music and there are parts of my project that need more than two audio tracks.
View 3 Replies View RelatedI have been using VS since version 9 and I seem to get the same thing on each version. After I have completed the project and burn to DVD the audio track seems too loud. I don't seem to notice it playing back the file (computer speakers aren't much chop) but once in the DVD player you always have to quickly turn down the volume once it starts playing. There is no static or distortion its just too loud. I now go into every song I input on the audo track and lower the levels. And it only appears to be the music. Audio in the video clips comes out at normal levels and does not need adjusting. If anything I have to boost the video clip audio because it's too low. The songs I import are directly from CD's or MP3's from my music folder.
Its not a real problem as I can fix by constantly lowering each song but is there a way to set the preference to lower the output on the audio tracks? That is to see the level automatically set below the 0 line when music is added. Or is it something in the burn proceedure in MF7?
I am editing in the timeline in Smoke 2013. I bring in a music track onto track 4. I bring in a interview clip on track 1. Only one or the other will playback and not together at the same time. I also notice on the audio tracks patch area a small square that when you place the cursor over and drag left or right I assume channels are being selected. What is this square box for and how do I get all my audio tracks to playback together?
I am using Panasonic P2 footage at 1920 x 1080. 29.97 NDF. I have brought them in through the media hub and created folders that correspond to each P2 card I stored on my Video Array. I am using a ProAvio Video Box with a RocketRAID 644 controller. What gives? Why am I not able to hear all the audio tracks during playback?
How do I add multiple audio tracks to a slideshow in Lightroom 5
View 1 Replies View RelatedNot sure if this is possible, but is there any way to turn a 15 fps clip into a 30 fps clip?
View 3 Replies View RelatedUsing Pro X4
I have a video file, I have an audio file. Video is loaded in the video track, audio in the Voice track.
HOW in the ... do I sync them? I have the mixer on, I can see the wav graphics, I can see where I want them to line up but either the Video track must slide forward ( and it won't, it's locked on 0 ) or the audio track must slide backward (but it won't slide below 0 start) I've tried splitting, clipping... I can't get it cut just right. All I want is time frame 0 for the video to start at positive time frame within the audio.