Premiere Pro :: Best Practice To Edit A Stereo Clip With Two Mono Voice Tracks
Sep 8, 2007
My video material holds two voices that were recorded on CH1 and CH2 in mono, resulting in a stereo clip that has one voice on the left channel and one voice on the right channel. So far I always duplicated the audio clips and use fill right and fill left. I just found out about channel mappings in CS2 and CS3, but for my actual project it is too late since it is cut already. It is my first project I'm doing in CS2 and after it is finished I will install CS3. So my first question is: When I use the channel mapping command, how are the resulting mono channels handled in the master? Will each mono channel fill the right AND the left channel of the stereo master track?
With delight I found out that the channel mixer in CS2 allows to use fill right and fill left effects, so I don't have to drag the effects on each clip separatley.
My second question is regarding the mixing of the two voices. Since we couldn't afford to have a professional sound engenieer at the shoot the channel of the voice that was not talking wasn't turned down, so the second voice will be heard on the other channel when the two people stood close together. Is there a more efficient way to mix the two voices instead of using rubber bands to bring down one voice when it is not talking? It's a hell lot of work.
View 6 Replies
ADVERTISEMENT
Jan 22, 2014
My video clip, brought over into Premiere CS6 from Final Cut Pro 5, has the usual left and right audio tracks, but in Premiere they are not linked into a stereo pair. Thus the volume level has to be adjusted separately in each track.
In Final Cut, I can quickly convert two independent audio tracks into a stero pair by selecting the tracks and then going to the menu Modify > Stereo Pair. I can't figure out how to do this in Premiere.
When two audio tracks are not linked, the volume level has to be adjusted separately in each track, which wastes time. But after two tracks are linked into a Stereo Pair in Final Cut, adjusting either track adjusts them both, together. That's what I want to do now in Premiere.
So, how do I make two separate audio tracks into a linked Stereo Pair in Premiere?
View 14 Replies
View Related
Feb 20, 2014
Or can I? "Link" is greyed out
View 8 Replies
View Related
Mar 18, 2013
I captured video that is mono, and want to make it stereo? VS5 . I tried splitting the audio and trying to place it in another track which didn't work the closest I can get is to set it on 5.1 channel. But it doesn't quite sound correct in the right speaker.
View 2 Replies
View Related
Jan 28, 2013
My mic I'm using to record is a mono (single channel) and I find that no matter what I do in VSPX5, the audio to my video stays in mono. I've tried saving an audio file of the clip as mono or stereo. I've tried saving the video using different compressions as well. Still, the audio only comes out of one speaker.
View 1 Replies
View Related
Feb 2, 2014
In Adobe Prem Pro, I'm finishing a short film. All, of a sudden I am bringing over one last clip, and I can't get an audio track. So, if I select a clip and drag it over, only the video shows up.
View 5 Replies
View Related
Jun 20, 2012
I have seen a number people new to smoke get confused when trying to edit mono audio source to a stereo track only to find the audio doesn't doesn't appear.
How about a preference that automatically splits the mono audio so that it edits to the stereo track?
If it was on by default it would definitely be of less confusion to new users
Or perhaps a dialogue box explaining why the edit did not work due to the differing audio properties.
Great work with getting smoke to where it is!
View 1 Replies
View Related
Feb 28, 2014
I'm having trouble figuring out how to edit multiple audio tracks. I put the clip on the timeline and I can hear both tracks but there is only one audio track showing. How do I seperate the tracks?
One track is from a rhodes external mic with phantom power using XLR. The other is from a powered lavalier mic attached by XLR. Is there something I have to do in project set up?
View 5 Replies
View Related
Jan 8, 2012
Can I use "edit in" in Lightroom to move video clips to premier or premier elements to edit them?
View 17 Replies
View Related
Dec 4, 2013
I just got a gig editing on adobe premiere pro cc, I downloaded the trial and started to figure out the software- Im using the muticam function cause the project was shot like that. so I edit and go to esport a short intro to the client and blammo a bunch of my work is gone and been replaced by the same first clip over and over. - is this a bug in the trial? i was given 7.0.0 for the download?
View 1 Replies
View Related
Jan 11, 2014
So I am in premiere cs6 on a mac 10.6.8, and when I go into preferences-Audio hardware and I try to change the input to the built-in-input, a white box comes up and it never goes away. It says application not responding so i=I have to force quit.
View 2 Replies
View Related
Oct 27, 2010
Is there a way to show the voice pattern and the clip in video track one. I want to see the voice print, so I can make a cup without cutting off part of a sentence when cut out part of a clip.
View 3 Replies
View Related
Mar 28, 2014
how to make a radio voice with adobe premiere ?
View 2 Replies
View Related
Apr 5, 2014
I have a 32 GB video in several segments that I would like to edit, including combining the segments, eliminating some audio, and adding voice over and possibly still shots. Can I do this in LR4?
View 1 Replies
View Related
Mar 27, 2014
Not sure if this is possible, but is there any way to turn a 15 fps clip into a 30 fps clip?
View 3 Replies
View Related
Apr 17, 2014
OK, I love the new method of scrolling to expand tracks in PP CC. I only see the bottom half of my audio. Is there a way to have the old view?
View 4 Replies
View Related
Jan 27, 2014
So the option to add Adding Video/Audio Tracks to Timeline are "grey'd out" and what's even more strange is that they don't even have the one or two tracks that are usually in the timeline when you open new project.
View 14 Replies
View Related
Mar 1, 2014
I can see the chosen video on the right side but I cannot see the previews of the other tracks or switch from one to the other. This project was working just fine and I didn't change any settings when it decided not to work. I just hopped over to make some adjustments to another timeline and then when I jumped back over to the master with the multicam nested inside it decided to stop giving me previews and prevents me from switching camera angles.
This shows my multicam monitor:
And this shows the timeline that contains all the tracks for the multicam:
I have multicam editing enabled on the multicam sequence with the above tracks nested inside.
View 3 Replies
View Related
Jan 14, 2014
I recently started to work with the Adobe suit so i am not yet used to the workflow. We are serval people working on the post production of a short movie filmed with a red SCARLET in raw which means that the files are pretty big. The audio where captured in serval tracks who all have been merged with the video clips. The clips have thereafter been cut and placed in its right place. So now it is my job to work with the sound design. I have tryd to export the audio in both AAF and OMF and every time i open it up in Audition it sais that the media is offline. On my computer all i have is the orgininal Audio files. Is there anyway to get only the audio (all the tracks) to Audition, without having them searching for the merged files. For example creating new Audio from the cutted tracks?
View 1 Replies
View Related
Dec 10, 2013
I can edit a video, with resynced sound/dialogue in premiere cc. When I save and close the project, everything is okay. When I later reopen the project all or most of the audio tracks are blank. They are there with the right name and length, but no waveform and no sound. I have put them in manually resynced and then on save and close: again they are gone. So there really is no point in editing if I can`t save the result. How can i restore my edits and also why do I have to do so? I have now redone every scene 5 times and I need a solution asap. Autosave keeps the same useless projects.
on Mac Pro, 10Gb Ram, premiere cc.
I tried the pluraleyes extension (as I was using pluraleyes) but this makes no difference.
View 5 Replies
View Related
Mar 21, 2014
We are recording in two languages, one in left and the other in right channel. However, in Adobe Premiere Pro we are not able to split the track when we take up for rought cut. Both the tracks are found mixed. Since we need to maintian the split track to dubb into other languages.
View 2 Replies
View Related
Sep 17, 2013
I love CC's multicam feature, but keep having this problem:
In Pluraleyes, I would lay all my Cam 1 material on video track 1 (multiple clips), then Cam 2 on video track 2 (multiple clips), add my audio, and create a multicam track that kept all Cam 1 clips on track 1 and all Cam 2 clips on track 2.
in Premiere Pro CC, multicam creation can only be exectued via the browser, not the timeline. So Premiere syncs everything up and throws each clip onto the next video track up, leaving you with a mountain of timeline media that reads out tiny and jumps all over the place when viewed in the multicam monitor (see picture).
What I'm after:
- the ability to create multicam sequences based on the timeline (lay out all clips from each cam on whichever video track I want, select all, then choose "create multicam sequence") so that the end result isn't 20 video tracks I have to manually collapse into 2 (time waster).
View 6 Replies
View Related
Nov 28, 2013
I am new to working with bigger projects in Premiere, I moved from FCP last year. I am currently editing a show which is based of Line recorded cameras.
I have 6 Tracks of video, plus mulitple audio tracks and 2 hrs long
My problem. Having made and lifted my selects in the timeline I now am finding the timeline to be very unresponsive to the point of pinwheeling even just to open the sequence. I can't zoom, move or edit anything in this timeline without a pinwheel and a 30 second delay. None of my other sequences are having this issue. All are the same codec.
Is there a way to set up larger sequences so that this does not happen? I find premiere 7.1 is fine until I build bigger sequences/projects. My inital thought was drive speed, however the issues only arose when I had lifted all the selects.
Could it be that I have too many tracks of video for premiere to handle? I have no problem playing the timeline (although it will initally pinwheel) its mainly navigation/clip selction along the timeline which causes an issue
I tried multicam also but that had too many issues
I work on a 2012 Mac Pro 2.4 Ghz 12-cores with 12 GB ram 9 of which is allocated to premiere. I also have my working caches on a dedicated single 3.5" 7200 rpm drive 1gb graphics card.
View 1 Replies
View Related
Nov 27, 2012
In tracks editor, if let say i have 5 keyframes then i select 3 of them in the middle , then how to do the X-scale ? Among the available operation, i can't find scaling.
View 5 Replies
View Related
Jul 23, 2013
I'm trying to edit multiple camera videos on main and overlay tracks switching between them. I cannot seem to be able to leave a gap on the main video track at all whether ripple is on or off. What do I do to leave a gap in the main video track (with the video at that point in the overlay)?
Also I noticed the Track Manager has a greyed drop down to add video tracks. Is there a higher priced version to have more video tracks as opposed to overlay tracks?
View 8 Replies
View Related
Mar 17, 2014
I have created 3 different sequences, and placed a clip into each one. I went into #s 1 and 2, and added a dip to black transition to the end of the clip in each. When I went to #3, I was unable to add the dip to the clip in there. Dragging the transition to the clip on the timeline gave me a had with a circle + slash. Double clicking the transition wit hteh clip selected did nothing. The layer is not locked.
View 5 Replies
View Related
Feb 3, 2014
I used to have this problem with CS5 and hoped it wouldn't happen again when I bought in to CC.
In the timeline certain audio tracks will not allow me to enable clip keyframes. When I try the 'add keyframe' button is greyed out. I can add track keyframes no problem but using them is a lengthy work around. The error also seems to be radom and trashing my prefs makes no difference.
Specs are:
iMac 27" 3.4GHZ i7, 16GB DDR3, Radeon HD 6790M 2GB
View 1 Replies
View Related
Feb 19, 2014
I have a project which requires a lot of different edits from the same clip.
Is there any way to do this without having to duplicate the same clip each time and then making my new edit?
For instance -
Clip 1 is 20 minutes long.
My first edit is from 1:10 to 1:35.
I then duplicate Clip 1 and make another edit from 2:40 to 3:55. I'm using Premier CS5.
View 5 Replies
View Related
Dec 9, 2013
I'm trying to replace the audio of a clip. I know I can easily delete the audio once it's in a sequence, but I'd like to replace the audio entirely so that the new audio is always on the clip as it's viewed in the project bins. You can edit in Audition for the clip, but thre doesn't seem to be a way to save the changes.
View 3 Replies
View Related
Jan 10, 2014
Is it possible to search the timeline for a clip, like you can do in FCP?
View 8 Replies
View Related
Mar 30, 2014
What do the zig zag lines mean on a clip in Premiere pro? And how do I fix it as I can't see a video image for that clip?
View 12 Replies
View Related
