I'm green with Videostudio as i use pinnacle before.
The version I use is X5, I want to make a very good quality photo album with the videostudio, I want to make the blu ray, what do I need to set before I start the project? What resolution should I set and where can I set? someone said the AVCHD is the same as bluray, I don't know!
I am trying to set up a METRIC project (that I want to make template) that uses meters instead of millimeters.
So I created a new project, without the use of any template. I copied from the default Autocad templates folder the Model and Sheet templates to the new project folder and I set the units, scale and grid to meters and changed the path in project properties to these files.
Everything seems to work fine, except creations of sections/elevations.
I edited the SectionStyles (Metric).dwg file in default styles folder and It works fine.
But I donțt want to change that file in the default folder, but to change the path of the section styles in the project. The only way I could do that was to change it in the tool palette - right click on callout.
So how can I make the SectionStyles to load from a specific location for a project without having to right click on every callout that I want to use and change it manually?
There are some other things to do/change for making the project template that I want? (I am referring to the units setup).
Using Smoke EXT1 and a previous user archived his project using the old school method; media and setups seperatly instead of just selecting the project as a whole.
I've draged the media into a library and restored that easy enough but can not find the details of how to recover the setups from the tar file in the archive. It does not show up in the media pannel at all, just an emply folder. How to get these setups loaded into a project?
I have a folder under libraries in my project setup where I plan to keep my library parts. Once there the parts are read only. my questions is should I not have them there. I cannot modify then if i need to and if I copy it out to change it they do not update in the library.
What is the best way about setting up libraries in my project setup?
I am trying to deploy my DLL and during compilation , I got the below error.
------ Build started: Project: Practice, Configuration: Debug x86 ------
vbc : warning BC40010: Possible problem detected while building assembly 'Practice': Referenced assembly 'mscorlib.dll' targets a different processor
vbc : warning BC40010: Possible problem detected while building assembly 'Practice': Referenced assembly 'System.Data.dll' targets a different processor
Practice -> C:VBProjectPracticePracticeinx86DebugPractice.dll
------ Starting pre-build validation for project 'mySetup' ------
WARNING: Unable to find dependency 'ACMNUPARSER' (Signature='(null)' Version='18.1.0.0') of assembly 'AcCui.dll'
WARNING: Unable to find dependency 'MANAGEDMC3' (Signature='(null)' Version='4.11.0.0') of assembly 'AdWindows.dll'
------ Pre-build validation for project 'mySetup' completed ------
[code]....
I am attempting to create my first Title Block with Attributes. I came across this online demo that suggests navigating to the "Projects" Tab - then selectign the "Title Block Setup" tab. I am using CAD 2012 and spent the last hour searching for this command. It does not appear on my navigation or tool palletes. URL....
View 2 Replies View RelatedHow do you extract an Export to DWG setup .txt file from a Revit project model?
View 3 Replies View RelatedI've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
Have created a 42 minute movie that includes the accompaniment track and visuals for musical. I will show the movie via large media projector from the computer VGA out. I'm running 3X in Windows 7.
I am able to access extended desktop, duplicate desktop, etc. via function F4.
I need to be able to PAUSE the video (for live drama) and restart without the controls showing on the big screen. I need to be able to SHOW the movie while viewing the CONTROLS on my monitor display.
Can the "project playback" function be set up to play this way? If not, is there a recommended format I should export to to be able to control the movie this way? Any software recommended to show the movie with a public view and a control view on my monitor?
I downloaded VS trial and am trying to install on a Windows 8.1 64 bit system. My setup dialog is very unusual and appearing like a scrollable window (please see attached picture). When I check on the license agreement, the "next" button wont get active. Is there any run time engine needed to run the setup properly?
View 4 Replies View RelatedIn any case, when I try to enable System Audio in the screen capture setup, I get an error message saying that it can't find any system audio.
System audio is working fine on my system, and neither Camtasia, CamStudio nor two other screen capture applications that I use have any problem with this whatsoever.
In our drawing office we use Inventor in a mining materials handling environment. Our output is mainly structural drawings where we require a bill of materials as part of creating a drawing. Whenever I insert a BOM in the drawing environment I get this table which is labeled in a foreign language (it looks like an Eastern European language) and the format is not as per the standard Autodesk installation setup.
How do I either revert back to the standard setup or do a BOM setup from scratch?
We use IV 2013 Professional on Windows 7 64 bit.
Moved Videostudio X4 from a Win 7 machine to a new Win 8 PC.
Again it seems, audio plays fine when playing a clip from the preview window but not when playing on the timeline. (I had a similar problem with X10 and reported it in an older thread.)
Am searching now for more patches (and yes, I'm aware X6 is now the current version) but nothing obvious at the moment. Have found the SP 1/2/3 downloads on Corel's pages, but as it already upgraded to SP3 just after install, I'm guessing SP 1 and 2 are already covered..
In the past I've used a Panasonic SDR-S7 video camera which produces MPEG files with no problem.
I now have a Panasonic Lumix still camera which also takes AVCHD video. The individual files play perfectly in VS12, but as soon as I try to play the project to preview it, the picture keeps freezing. I thought this could be due to the new video's being HD but I don't think the individual files could be played either.
I have been doing this project in X5 and was putting a still picture at the end. When I review the project it stops about a second or so from the end. I thought it was the song, so I took that out.
I changed the picture, did the same thing. I lengthen the time on the picture, it will place and stop about the same time from the end. Doesn't matter how long the picture is playing. If I take the picture out, the video just before it plays fine. I put a picture back in, and it does the same thing? I thought the project time may be set someplace? Doesn't seem to matter because I change the timing on the picture at the end. Stops the same place?
Certainly couldn't open an X3 in X4. If I wanted to edit/burn my X4 in the "faster" X5, why should I essentially start from scratch to take advantage of X5?
Project would be SAVED as an X5 project file, of course.
I add a video to the timeline video track (not the overlay track), and with 'clip' selected and playing... I have audio just fine, for the most part... sometimes the audio jumps and skips, and sounds garbled. With 'project' selected and the video playing, either the same thing happens as the 'clip' or there is no audio at all.
What I have discovered, is that this is common with AVI files. Other files, such as WMV, don't seem to have this problem. It affects only AVI files. The video plays just fine in WMP and VLC, as well as other video editors such as PowerDirector... so why dos VideoStudio have this odd sound issue? And I'm sure as Hell not gonna convert all my videos to WMV just to edit them.
This is on a fresh install of VideoStudio Pro X4 (as well as Windows), no updates, no Service Packs, no nothing... even WITH SP1 it's still does it. I've also removed and reinstalled my codec packs (from K-Lite to Shark007) with no difference.
I've also hear that people are now having this issue with VS Pro X3 as well (I have X3 to) so I assume it's pointless to install X3 as well. I really do NOT like using any editing software other than X4, since it's the best one I've used... so I do not want a reason to use something else.
I've recently upgraded the PC and re-installed VS10 onto the new, improved, beast in front of me now, but have hit a hurdle.
Whether I'm looking at an imported project or starting a new one from scratch, I seem not to be able to get the audio tracks to play when playing the project as a whole.
I can select the music track and play it from within the timeline without a problem, but select the project and all I get is the sound of silence.
after scanning and searching the forum I can't find anything that fits my bill so far.
Drivers have been checked and updated where found wanting. I'm at a loss to explain why. I never had this problem back on the old slow-coach...!
For info I'm running Vista on a dual core 2600Ghz machine with Asus P5K Pro 'board (on-board audio) and a GeForce 8600 GTS graphics card.
I recently upgraded to x6. My question is, there were some hd project templates that came with x3 that id like to use with x6. How to do this, or import or find the files?
View 5 Replies View RelatedI want to burn my project I have created on VSX4 to a DVD. I don't want to create a menu or add chapters or anything else, I just want to burn my project to the DVD. I have followed the instructions in the user guide to bring my project in to be burnt, but the next button remains greyed out so I can't go to the next step to enable it to be burnt.
View 5 Replies View RelatedI finished the DVD, looks great, now I want to make another DVD the next day. How do I recover the project? In VSX3 made it really easly to recover DVD projects with all the menus, chapters and any other setting. Where does VSX4 save the finish project at?
View 2 Replies View RelatedI have VideoStudio X4 pro, think the sales man did a great job as i'm a beginner and man o man this isn't what i thought it woud be I'm trying to save my pictures to cd, it burns in and when i go to play it on the video, it won't work, just comes up black? Have slected create disk image, have used the cd-r before to do a similar thing and it won't work.
View 3 Replies View RelatedAudio in clips (video or audio) plays but will not play in project preview or in created video files or DVDs.
Devices:
No special devices just the normal PC setup (using 3 monitors).
Video Studio version:
VSX4 Pro: SP1, SP2 and SP3 added with nothing else added (templates etc).
Source files:
Codecs Note:
I first tried VSX4 with only the codecs on the PC from a new install - that is a total wipe of the two SSD drives in the PC and a reinstall from 'clean' of Windows 8 Pro on the 'c:' main SSD and a new install of VSX4.
The PC then had adobe flash player added - mainly just for 'YouTube', 'DivX' and 'Xilisoft - Video Convertor Platinum' - a package I have used extensively before and along sided VSX4 without issue.
When I found that the audio issue continued I installed the latest available 'K-Lite' package via 'CNet - Downloads'. Throwing codecs at the problem is not necessarily I have used 'K-Lite' on and off for years though and have had no issues from 'K-Lite' (with VSX4).
Regarding .avi:
I am told there are some 800 plus known versions of files that have the .avi extension and this is problematic. However, I have tried many files and converted some to the somewhat 'standard' DivX, Xvid or H.264/MPEG 4 and had no luck thus far!
Have tried various source files from various sources. Have mostly tried .avi (DivX /Xvid) files but have also tried mpeg and mpeg 2. Have tried converting files from one type to other also.
I use the audio as it is per file and have tried splitting the audio and saving it as a .wav directly from VSX4 then using that .wav as a voice or music track. Split audio works in independent player (Windows Media Player) and plays directly in VSX4 as a clip but not when playing the project.
Project Properties:
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Upper Field First
(DVD-PAL), 16:9
I have not deliberately set any of the properties manually and they seem correct for my usage.
PAL or NTSC:
In the UK using Pal.
Error Codes:
None.
Trying to make:
So far just testing VSX4 in Win 8 and looking to make standard DVD of legally acquired old B&W movie(s) or home video only.
Additional:
All my PC drivers are up to date - I check video and audio drivers regularly and run windows update often.
I have .net as standard with Windows 8 but had to install an earlier version as it was reported as required by a game (Lord of the rings online).
End:
I know I have not given precise audio and video data but this is because no matter which video I use the problem is present - I have tried many videos and audio over the last week or so.
I wonder if this is a Windows 8 Pro issue only as when I had the same PC setup with the same VSX4 and the same software previously on Windows 7, VSX4 worked a treat! That is as close to 'same' as is possible - I know Windows 8 is a bit different to Windows 7.
I started a VSX5 project that my friend wanted to piggyback on with his VSX4 software . He tells me that VSX4 opens but nothing seems to happen afterwards. Does it mean that VSX4 is incompatible with VSX5 .vsp file projects ?
View 2 Replies View RelatedI am using my older version of VideoStudio because I don't like the 14 - they switched too many things around.But I am trying to pull up a project that I was working on, and nothing happens. I go File/project and click on the .VSP and nothing happens. I also tried going to the .VSP on my hard drive and selecting "open with / Video Studio" and nothing happens.
This older version and the X14 are not in the same file folder.
Yesterday I re-loaded 11.5 and it worked for a while. I exited over night.Today it stopped fetching project files and NOW, it won't re-install. The disk is configured that it will only re-install twice..
My project is 11-minutes long. There is a lag of around 10-seconds when I am on the timeline and hit <space> or press [>] on the preview control. It wasn't like this when I started the project earlier today.
What can I do to get rid of this lag?
I have in my project a lot of video clip that I did a slip of the audio track.
If I need to delete one clip, by example in the middle of the project, the audio track corresponding is not deleted...and if I delete it manually, all the other audio track at right do not move to the left...so the audio track and the video clip are not sync anymore.
How can I correctly delete a part of my project?
When I try to open a vsp project in X5 using Windows 7 I am getting an error message saying, File is already in use, and a number 15055:1:1. I have been using this computer with X5 and XP professional and it works fine. I have a selection of vsp files that I use as templates, the only time I have had this message before is when I had my template vsp files write protected, which I have stopped doing. I have now installed Windows 7 on this same computer but cant open any of my previous projects. These projects were created using X5.
View 3 Replies View RelatedI am playing a section of a project in Timeline view. The section is marked by the Trim Markers. Starts fine but then pauses/stops when it reaches the end of the accompanying music (an mp3) rather than at the second Trim Marker. Theses two points are different because the video fades to black as the music finishes. The video should continue to run for 2 or 3 seconds more with a black screen.
I've noticed that if I select the Sound Mixer and then play the section between the Trim Markers it works fine i.e. plays up to the second Trim Marker.
Also, it seems that if I create a video of the selected part of the project this works fine too.
I just seem to be getting the problem in Timeline view when I have black video that runs after an mp3. I have checked multiple projects where I have the same effect (fade to black as music ends) and I am getting exactly the same problem. As the sound stops, so does the playback.
Background is that I am new to X3 and struggling. I had problems authoring in X3 so used X2,. Then had a problem with X2 so re-installed. Then found this problem when editing again in X3 so reinstalled X3!
I tried to set my project as MPEG4 with resolution 1920x1080 and bitrate 30000 but I can not find how to do it.
Even I set to another format like M2TS it can set to 1920x1080 but the bitrate is only 18000.
I've got a project file that I've been working on for a few weeks. I made a couple of changes to it today and now it will not play through completely. It stalls right at the same spot each time and no matter what I delete in the project (trying to remove the offending element) it still stalls. What I mean by stall is that the player stops and the play button reappears. if I press play again, it plays a few frames and stops.
I'm using VideoStudio 4.