I downloaded VS trial and am trying to install on a Windows 8.1 64 bit system. My setup dialog is very unusual and appearing like a scrollable window (please see attached picture). When I check on the license agreement, the "next" button wont get active. Is there any run time engine needed to run the setup properly?
View 4 Replies
I have been having trouble with CS3 programs not loading properly so I went to reinstall in and it will not let me reinstall says that there are component failures.
View 1 Replies View RelatedI downloaded a trial of CS3 a few years ago and i'm trying to uninstall it. When I try to I get an error message that says "Setup is not properly installed. Please re-install". How can I fix this?
View 4 Replies View RelatedXref overlays are not loading properly. Coordinates are off after loading ... even with insertion at 0,0,0.
View 7 Replies View Relatedworking with 2014 acad and i have made myself a partial CUI. it is really only one extra tab on the ribbon with a few of the standard panels i use in one place. nothing to out there. so here is a step by step of what i did to get this cui file.
entered comannd CUI in command prompt.
went to "Transfer" tab in the CUI dialog box
on the left panel it is "Main Customisation File (acad.cuix)"
on the right panel i created a new CUI file.
then right clicked the "Ribbons" path and created new "Josh's Tab"
then transfered the panels across i wanted
then saved the cui as "Josh's CUI.cuix"
then loaded the .cuix file via the "CUILOAD" command
at first nothing at all happened, so i unloaded and reloaded it. then closed and opened acad again. still nothing
so i loaded it and unloaded it a few times again. so i went back to "CUI" and had a look at my partial and it hadn't saved anything.
so i created a new tab again "Josh's Tab"
transfered the panels again and saved the file then loaded and reloaded the .cuix
when i loaded it acad "blinked" while it reloaded all the CUIs and my tab was there but no panels. i had another look at the CUI and the panels are there but not showing in the ribbon.
i have done this from 2009-2012/13 (can't remember which i was last using) and never had a problem. i have been away from Acad for the last 16months though so i figure i have just forgotten one simple step somewhere. I have the current SP installed also.
Product design suite 2014 running on a Toshiba Qosmio X870-70
Initially we got an error message stating: "error: no function definition: VLAX-USER-PRODUCT-KEY".We did some trouble shooting ourselves with information obtained via several web searches, involving the following:
1) Adding .fas files from the Express directory to the appload.
2) Reloading the acetmain.cuix via menuload (had to unload it first, since it was apparently already loaded)
3) Removing and re-adding Express Tools via Programs & Features (Add/Remove programs)
4) Reinstalling AutoCAD 2014
5) Running (vl-load-com) from the command line (no effect)
6) Running expressmenu and expresstools from the commandline (says it's successful).
then we are now getting "error: no function definition: VLAX-MACHINE-PRODUCT-KEY"..The registry keys appear to be OK, and I am seriously at the end of my tether. I have pretty much tried everything I could find to no avail.
I'm green with Videostudio as i use pinnacle before.
The version I use is X5, I want to make a very good quality photo album with the videostudio, I want to make the blu ray, what do I need to set before I start the project? What resolution should I set and where can I set? someone said the AVCHD is the same as bluray, I don't know!
Have created a 42 minute movie that includes the accompaniment track and visuals for musical. I will show the movie via large media projector from the computer VGA out. I'm running 3X in Windows 7.
I am able to access extended desktop, duplicate desktop, etc. via function F4.
I need to be able to PAUSE the video (for live drama) and restart without the controls showing on the big screen. I need to be able to SHOW the movie while viewing the CONTROLS on my monitor display.
Can the "project playback" function be set up to play this way? If not, is there a recommended format I should export to to be able to control the movie this way? Any software recommended to show the movie with a public view and a control view on my monitor?
I need to use a font that's not one of the currently loaded fonts that VS x3 recognizes. I don't know if the available fonts come with VS x3 or if they are part of Windows, but either way, I need to use a font called "Helvetica Neue LT STD 77." Assuming I acquire the font data, how do I get VS x3 to recognize it?
[URL]....
I have produced a MP4 video using Magic VideoDeluxe. I can read it properly with VLC.
I can import it in a visual studio pro x5 project. The problem is that when I play it in Video Studio environment, some sequences are replayed twice and it happens that I see video artifacts.
Is it due to the codec? I have downloaded (and bought) VideoStudio last week, so I think it is not necessary to download the patch provided on the website.
problem with loading large numbers of images, not large images, but a lot of images in VS11. I am loading a lot of images to make my annual slide show for the HS band and I am running into a problem where the images start loading quickly (1 second each) and after about 150-200 images you start to load slower and slower as much as 70 seconds on image #300). I don't remember having this issue with VS9, which is what I used last year.
I tried loading the same thing in VS10 and it is much better on the load. There is a recognizable slow down, but nothing like VS11. Before you ask, I would be fine with doing the slide show in VS10, but running in Vista VS10 crashes on me too much to get it done.
I did a clean install of VS Ultimate 6 after completely removing VS Ultimate 5 from my system. Boy, do I wish I had not done that!
After installing VS 6 and all of its extras, it starts up fine. But when I load project (VSP) files I had created using VS 5, it starts populating the timeline with clips and then hangs hard. It never comes back … i have let it start loading before bed, and the hourglass is still spinning when I wake up the next morning. Have to forcibly close it.
Not all VSP files will hang VS 6. Just the most important two projects. Periodically, as I'm developing my project (and a separate parallel project), I will create my own work back up by doing a File Save As with a new number at the end of the file name. I am presently working on Act I v14. I have verified that v1 thru v3 work fine, but v4 thru v14 all hang VS 6, as well as Act II v1 thru v8 (which is all of them). These two projects represent hundreds of hours over the last 10 months. If I have to start over, I will kill myself or start drinking again or something.
I would remove it and reinstall VS Ultimate 5, but I am unable to locate installation disk #1. I have my serial number stored away in a CodeWallet database, but the disk is mislaid somewhere in this debris field that is laughingly called my home computer room. So, how I could download, VS Ultimate 5 disc #1,
Windows 7 Ultimate w/SP1 and all updates (64-bit operating system)
AMD Phenom II X4 925 Processor 2.80 GHz
AMD Radeon HD 6450 display adapter
8 GB RAM
104 GB system drive (7 GB free)
833 GB second drive (459 GB free)
There seems to be an issue with edits to DVD menus not being saved properly. This is in addition to the chapter names problem I've read about.
Whatever changes I make to the menu in the Create Disc dialog, such as adding a graphic and changing text to the Main menu, are lost upon closing the Create Disc dialog and returning back to the VSPX4 Share workspace.
In short, this is my workaround:
1. Save the current project (File > Save).
2. Click Share > Create Disc.
3. After the Create Disc dialog pops up, remove the movie that's labeled "Untitled."
4. Add the .VSP project just saved.
5. Add chapters, edit the menu text, and so forth.
6. Click the "Close" button.
The DVD chapter markers will update on the VS timeline. Previous chapter markers on the timeline are deleted. I now want to see if the edits to the menu have been saved, so:
7. Click Share > Create Disc again.
8. Remove the movie labeled "Untitled." That always comes back.
Edits I made the last time are still there.
9. Continue with adding chapter markers, editing the menu...
With my strategy, all chapter markers have to be added in the Create Disc dialog. Chapter markers on the timeline in the VS Edit workspace get passed to the Create Disc dialog, but they are associated with the movie labeled "Untitled" which I delete. There is no point in adding chapter markers to the timeline in the VS Edit workspace.
Having produced my first video production on VS4 I made several copies on DVD but I have been unable to get any of those DVD copies to play properly on most DVD players. They all behave differently on on Different players, on some players they won't even start, some will start and play part of the way through before playing up. All copies behave differently on different players. I have been able to get most copies to play properly on my computer.
View 1 Replies View RelatedIn any case, when I try to enable System Audio in the screen capture setup, I get an error message saying that it can't find any system audio.
System audio is working fine on my system, and neither Camtasia, CamStudio nor two other screen capture applications that I use have any problem with this whatsoever.
I bought a full copy of Videostudio Pro X4 about a month ago after experimenting with the trial version for a good while, and it was all running smoothly until I was adding some rain effects to a rather large movie, and it said something along the lines of not enough space to load something, and then all the FX thumbnails disappeared. When i closed the program and tried to reopen it, it said "Error loading from stream" followed by a "Videostudio Pro has encountered an unspecific error and needs to close, please contact Corel Support and include a copy of the Dump file.". And now every time I try to load the program it gives me this error, and thats without loading the actual project that the file had the initial error on. All the files within the folder were captured via VS either as Video or as Stop-Motion so are under the default settings as I havent changed them or converted them atall.
I cant find anything on the knowledge base about this, and neither on these forums. I'm unsure how I send the Dump File, which I have found to Corel? I'm abit confused from the warranty support bit of the page where it says about having a one-off chance to contact them? So obviously I dont want to mess up my one chance so thought I'd check here what to do next!
A re-install of the program seems the logical next step but will I lose my project?
I am having problems with one of FX effects in corel video studio x3. When I select 'stationary' on the tick box and play back the video, the light still pans around the screen regardless of 'stationary' being selected or not.
View 2 Replies View RelatedFor the last few weeks I have been using the trial version of Pro X4, which I would gladly purchase if not for two recurring problems: (1) The program often shuts down when I am adding subtitles. (2) Sometimes I get the blue screen of death after loading video from my camera.
The subtitle problem is one I have experienced with the old Ulead Video Studio. I have a brand new hard drive with lots of available memory, and I do not have similar problems when using Windows MovieMaker (which I hate to do because VideoStudio is better).
The second problem is more disturbing, because the computer itself shuts down. Again, I have experimented, using Windows MovieMaker to load video, and there is no problem. The crash seems to take place after the video has been loaded, when VideoStudio begins displaying thumbnails of the clips (I load using the "split by scene" feature).
When this happens, I have been getting the "No storage to load BB" message, about which there is a thread somewhere, without a real answer for what "BB" stands for. I have read through this thread, and the suggestion seems to be this has something to do with file size.
Sometimes after I click "okay," my computer monitor goes blue with some an error message that I cannot fully read because it extends off the edges of the screen: something about dumping memory. Some numbers countdown at the bottom of the screen, something about memory dump, but it all disappears before I can read through and make sense of anythingl.
After rebooting, I might also get a message about the file (singular, not plural) being corrupted and therefore not properly saved, but all the clips are there when I look for them.
My hard drive is not short of memory (3/4 empty of 465 GB capacity). I also tried saving directly to my external hard drive (which has 1.5 TB free out of 2 TB capacity). Same problem.
In our drawing office we use Inventor in a mining materials handling environment. Our output is mainly structural drawings where we require a bill of materials as part of creating a drawing. Whenever I insert a BOM in the drawing environment I get this table which is labeled in a foreign language (it looks like an Eastern European language) and the format is not as per the standard Autodesk installation setup.
How do I either revert back to the standard setup or do a BOM setup from scratch?
We use IV 2013 Professional on Windows 7 64 bit.
Using VideoStudio X4 Ultimate 14.2.0.23 I have the following issue:
When doing a crossfade between video clips, the audio crossfades just fine in the preview of the edit screen in X4. However, after exporting to DVD 14:9 format, in the resulting MPG video the audio of the first clip correctly fades out, while the audio of the second clip doesn't fade in... it just jumps in.
my animation takes around two seconds to load within my browser. Is there a way to display a loading symbol such as spinning circle, that will show the animation is loading, then disappear once it is ready to display?
View 2 Replies View RelatedI'm currently working on a site which is almost 95% complete. The loading time for the site is approx 7-10 seconds which seems to be slow. I have placed a preloader but that doesn't seem to be coming up while the site is loading.
Is there anyway to speed up the loading time. Like some code that will tell it load specific number of frames first and then load the rest in the background?
I have compressed the images that are being used but cannot compress further as they may lose the quality.I've got the preloader working and now it seems to be showing up while the site is loading. Is there any way to speed up the loading time.
I need to convert CMYK into PMS 293 CVC - Blue..The problem is I don't see PMS CVC in the color libraries..
View 1 Replies View RelatedI've downloaded CS4 trial from adobe.com, but when I run setup.exe, nothing happens. Setup.exe is running in task manager, but...nothing. The same installation package works on my friend's PC. I have all required hardware, running XP SP3.
View 3 Replies View RelatedWhen selecting a brush (for masking etc.) I usually choose any of the round ones ("Basic brushes" group I think), then set the diameter/hardness to my liking before painting with it.
In other words: it seems that I only need one "basic" brush for general use, not 20 or 30.
would it be possible to make my own "group" of brushes where I only have, say 5 or 6 of the brushes I normally use? But at the same time not deleting the other brushes (I just don't want to see a long list of brushes every time).
I'm trying to setup PDN on a new computer (XP) and the only download site I can find keeps on bringing up something called optimum installer which wants to fill my new PC with garbage I don't need. Any proper download site?
View 10 Replies View RelatedI have a copy of Photoshop Elements 3.0 which I am trying to load onto my computer. I am having difficulty installing it. It tries to install Adobe Reader, which I already have. It detects that it's already installed, then stops the entire installation process.
View 2 Replies View RelatedHow do I add a new Pagesetup in VB.NET?I know I need the Plot.Settings class and I add it to the Drawing database. How to get started with the code and/or correct object?
View 3 Replies View RelatedI am creating a new descriptor key set and would like to have any points that do not have a current code come in on layer Sort Me. How to set up the key to do this?
View 3 Replies View RelatedThe page setup in my copy of Photoshop CS2 defaults to Letter. How can I change this to A4?
View 6 Replies View RelatedI know there are posts about this before, but nothing I can find seems to work. When I launch the Setup.exe, it loads the "Initializing Adobe Photoshop CS3" but when it finishes, Setup doesn't continue. I've tried the cleanup tool, cleaning my registry, rebooting, removing Photoshop from my Add or Remove programs list, removing older versions. Nothing is working.
View 6 Replies View Related
