VideoStudio :: Hangs While Loading Project
Mar 24, 2013
I did a clean install of VS Ultimate 6 after completely removing VS Ultimate 5 from my system. Boy, do I wish I had not done that!
After installing VS 6 and all of its extras, it starts up fine. But when I load project (VSP) files I had created using VS 5, it starts populating the timeline with clips and then hangs hard. It never comes back … i have let it start loading before bed, and the hourglass is still spinning when I wake up the next morning. Have to forcibly close it.
Not all VSP files will hang VS 6. Just the most important two projects. Periodically, as I'm developing my project (and a separate parallel project), I will create my own work back up by doing a File Save As with a new number at the end of the file name. I am presently working on Act I v14. I have verified that v1 thru v3 work fine, but v4 thru v14 all hang VS 6, as well as Act II v1 thru v8 (which is all of them). These two projects represent hundreds of hours over the last 10 months. If I have to start over, I will kill myself or start drinking again or something.
I would remove it and reinstall VS Ultimate 5, but I am unable to locate installation disk #1. I have my serial number stored away in a CodeWallet database, but the disk is mislaid somewhere in this debris field that is laughingly called my home computer room. So, how I could download, VS Ultimate 5 disc #1,
Windows 7 Ultimate w/SP1 and all updates (64-bit operating system)
AMD Phenom II X4 925 Processor 2.80 GHz
AMD Radeon HD 6450 display adapter
8 GB RAM
104 GB system drive (7 GB free)
833 GB second drive (459 GB free)
View 11 Replies
ADVERTISEMENT
Mar 22, 2013
My Windows 7 Adobe CS6 v13.0.1 x64 hangs when loading a file. However the CS6 v13.0.1 x32 application runs correctly. Do I need to re-install Adobe CS6 Upgarde?
View 5 Replies
View Related
Apr 11, 2014
I was using it for a class on my computer and decided to add some stuff to hopefully add things I didn't know how to do on my own and now I can't seem to open premiere. So I browsed for fx factory stuff and downloaded it and installed the free-plugins through that. Now it seems like premiere gets stuck on the quicktime exporter host. is there any way to fix this so that i can use it again? I'd really like to be able to finish my project, since I don't want to go back to imovie..
View 1 Replies
View Related
Oct 3, 2012
There was a time, probably 2012 SP1, when smoke startup would take max. 30seconds.Now with 2012 SP2 after selecting a project smoke just hangs at the "Initializing shades" phase for almost 1min. making startups a major 2min.
View 9 Replies
View Related
Mar 1, 2013
I will load a project and then have to wait and wait. and wait
Eventually the project will load, but first it will prompt with "Where is the file 0000026.MTS" . I just click skip then. This issue is probably unrelated to my loading problem though....
My PC has 16GB of RAM. Intel Core i7 - 2600 @ 3.4GHz I have a Sony camcorder that creates the avchd format
Is there anything I can do to speed up the process? So far I have disabled Antivirus scanning. I have also loaded latest drivers and firmware for all PC components. Adobe Premiere Elements 9 is also up too date with patches
View 1 Replies
View Related
Aug 22, 2011
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
View 7 Replies
View Related
Nov 15, 2012
In my office of about 30 computers and over the course of about 10-12 months we have been experiencing a problem with project navigator. When opening ACAD or changing projects about 60% of the time it gets hung up and the load bar perpetually loads over and over again. If just left to run it takes 5-10 mins to load the project then ACAD will crash after a couple of commands. If opening the task manager and ending the program it will often freeze the computer for about 5-10 mins as well.
We have been actively using the project navigator for years and not until the last yr have we been having this problem. We bought pretty much the whole office new computers a few months ago and the problem still exists. We are running AutoCAD Architecture 2012 and our machines are window 7, intel core i7 3.5 GHz, 8 GB ram, 64 bit operating systems, with a Nvidia Quadro 2000 graphics card. So our machines are solid.
View 8 Replies
View Related
Oct 26, 2012
Just deleted PR4, and installed PR5.Opening an existing project takes an extremely long time (maybe 20-30 mins? guessing here)The Smoke loading screen shows something like "Connecting Control Surfaces"..
View 9 Replies
View Related
Jun 20, 2011
Recently we have switched from VBA to iLogic code. We have stripped out all of the VBA code, but when parts and assemblies are opening there is a big delay and the words "Loading VBA Project" is displayed at the bottom of Inventor.
Is iLogic or some facet of Inventor 2012 still using VBA Projects? If not, then can I disable this to shorten the amount of time it takes to open models? If possible how would I do this?
Using Inventor 2013
View 5 Replies
View Related
Aug 19, 2013
Every time I load any project (even one I saved and closed 5 minutes ago) After Effects resizes the window. I would like to disable this 'feature' how do I do that?
View 2 Replies
View Related
Jul 15, 2013
Downloaded trial version, seems to have issues with the editor. Clip playback ok but when I try to do a project playback, it hangs after a few seconds of play back and then only creeps forward a second or two every time I attempt to hit play to have it continue through to the end. I use other video editing programs, never encountered this kind of issue. Cool effects but if the editor doesn't function right, what's the point.
I am running a new ASUS, windows home premium 64bit and have 6GB ram.
View 1 Replies
View Related
Jul 30, 2011
My capture card is a BlackGold BGT 3620 (which doesn't come with capture software). I had been using VideoStudio Pro X3 to capture VCRs through its analogue input (using S-Video) with no problems. However, I recently re-installed Windows (nothing different, it had just stopped working), and decided to give the trial version of VideoStudio Pro X4 a shot. When I go into the capture panel and click on "Capture Video", the "Source" field is blank, and the program completely hangs, so I have to kill it.
Of course, I can go back to X3, but sooner or later, it will no longer be supported, or there'll be some other reason I'm forced to upgrade, so I'd rather get this working.I tried running it as admin (although X3 used to work fine without it).
here's my set-up:
Mobo: ASUS M4A79T Deluxe
RAM: 8 GiB DDR3
GPU: Palit NVIDIA GeForce GTS 250 (driver V. 275.33)
HDD: 3 x 160 GB 7200 RPM SATA II
OS: Windows 7 Ultimate x64. All service packs, updates, etc., installed.
Capture Device: BlackGold BGT 3620 (driver V. 8.1.0.0)
Capture Media: UK PAL VCR, from standard VCR player, through S-Video
View 6 Replies
View Related
Aug 18, 2013
I recently upgraded to Studio X6 and downloaded service pack 1. I had this same problem with X4, and was in hopes X6 would eliminate it.
I open a project and I want to add a jpeg image, so I drill down to the folder where the file is located and it hangs there with the little blue circle going around, and no files appear and I get a message "Not Responding" I I must close the program or wait for it to respond, which it never does.
View 1 Replies
View Related
Feb 27, 2011
I have yet to edit a video. I have over 25 years of videos that were made on VCR tapes. I used a Panasonic VCR to DVD recorder to transfer those tapes to DVDs. I changed the extension from VOB to MPEG. Most of them import into X3 just fine. However, some of the videos I want the most will make X3 not respond (hang).
Here is what happens: I use the "Insert Media File to Library" process. Normally, when I click on the video its name appears in the File Name box right away. When it is a video that is going to hang the program it takes a very long time to fill the File name box. Sometimes it hangs there. Once, I was able to get the video into X3 and it started but I couldn't move the scrubber and then it would hang the program.
The odd thing is that the video will play in Windows Media Player and work just fine. I don't think there is anything wrong with X3, I think it is the videos. Would I benefit from an upgrade to X4?
View 4 Replies
View Related
Jan 14, 2011
Was able to trim and save 11 clips in new video files over 2-3 sessions, but then program hung after initiating 12th save. No duplicate file names, ie file already exsists. Computer show 100% CPU usage implying program has gone into loop. Have to use Window task mgr to end VideoStudio. When restarted VS indicates it is completing save started in previous session but creates empty file. Removing all Ulead files and folders I can find from computer left after uninstall, and all references I can find from registry, then reinstalling VideoStudio does not fix problem. I did not remove the video files in my user directory. There are no project files. Assume something remains on computer preventing clean reinstall and removal of bug.
View 8 Replies
View Related
Nov 18, 2010
I need to use a font that's not one of the currently loaded fonts that VS x3 recognizes. I don't know if the available fonts come with VS x3 or if they are part of Windows, but either way, I need to use a font called "Helvetica Neue LT STD 77." Assuming I acquire the font data, how do I get VS x3 to recognize it?
[URL]....
View 5 Replies
View Related
Dec 17, 2013
I downloaded VS trial and am trying to install on a Windows 8.1 64 bit system. My setup dialog is very unusual and appearing like a scrollable window (please see attached picture). When I check on the license agreement, the "next" button wont get active. Is there any run time engine needed to run the setup properly?
View 4 Replies
View Related
May 8, 2007
problem with loading large numbers of images, not large images, but a lot of images in VS11. I am loading a lot of images to make my annual slide show for the HS band and I am running into a problem where the images start loading quickly (1 second each) and after about 150-200 images you start to load slower and slower as much as 70 seconds on image #300). I don't remember having this issue with VS9, which is what I used last year.
I tried loading the same thing in VS10 and it is much better on the load. There is a recognizable slow down, but nothing like VS11. Before you ask, I would be fine with doing the slide show in VS10, but running in Vista VS10 crashes on me too much to get it done.
View 2 Replies
View Related
May 26, 2011
I bought a full copy of Videostudio Pro X4 about a month ago after experimenting with the trial version for a good while, and it was all running smoothly until I was adding some rain effects to a rather large movie, and it said something along the lines of not enough space to load something, and then all the FX thumbnails disappeared. When i closed the program and tried to reopen it, it said "Error loading from stream" followed by a "Videostudio Pro has encountered an unspecific error and needs to close, please contact Corel Support and include a copy of the Dump file.". And now every time I try to load the program it gives me this error, and thats without loading the actual project that the file had the initial error on. All the files within the folder were captured via VS either as Video or as Stop-Motion so are under the default settings as I havent changed them or converted them atall.
I cant find anything on the knowledge base about this, and neither on these forums. I'm unsure how I send the Dump File, which I have found to Corel? I'm abit confused from the warranty support bit of the page where it says about having a one-off chance to contact them? So obviously I dont want to mess up my one chance so thought I'd check here what to do next!
A re-install of the program seems the logical next step but will I lose my project?
View 3 Replies
View Related
Oct 22, 2011
For the last few weeks I have been using the trial version of Pro X4, which I would gladly purchase if not for two recurring problems: (1) The program often shuts down when I am adding subtitles. (2) Sometimes I get the blue screen of death after loading video from my camera.
The subtitle problem is one I have experienced with the old Ulead Video Studio. I have a brand new hard drive with lots of available memory, and I do not have similar problems when using Windows MovieMaker (which I hate to do because VideoStudio is better).
The second problem is more disturbing, because the computer itself shuts down. Again, I have experimented, using Windows MovieMaker to load video, and there is no problem. The crash seems to take place after the video has been loaded, when VideoStudio begins displaying thumbnails of the clips (I load using the "split by scene" feature).
When this happens, I have been getting the "No storage to load BB" message, about which there is a thread somewhere, without a real answer for what "BB" stands for. I have read through this thread, and the suggestion seems to be this has something to do with file size.
Sometimes after I click "okay," my computer monitor goes blue with some an error message that I cannot fully read because it extends off the edges of the screen: something about dumping memory. Some numbers countdown at the bottom of the screen, something about memory dump, but it all disappears before I can read through and make sense of anythingl.
After rebooting, I might also get a message about the file (singular, not plural) being corrupted and therefore not properly saved, but all the clips are there when I look for them.
My hard drive is not short of memory (3/4 empty of 465 GB capacity). I also tried saving directly to my external hard drive (which has 1.5 TB free out of 2 TB capacity). Same problem.
View 10 Replies
View Related
Apr 13, 2013
Moved Videostudio X4 from a Win 7 machine to a new Win 8 PC.
Again it seems, audio plays fine when playing a clip from the preview window but not when playing on the timeline. (I had a similar problem with X10 and reported it in an older thread.)
Am searching now for more patches (and yes, I'm aware X6 is now the current version) but nothing obvious at the moment. Have found the SP 1/2/3 downloads on Corel's pages, but as it already upgraded to SP3 just after install, I'm guessing SP 1 and 2 are already covered..
View 1 Replies
View Related
Aug 25, 2011
In the past I've used a Panasonic SDR-S7 video camera which produces MPEG files with no problem.
I now have a Panasonic Lumix still camera which also takes AVCHD video. The individual files play perfectly in VS12, but as soon as I try to play the project to preview it, the picture keeps freezing. I thought this could be due to the new video's being HD but I don't think the individual files could be played either.
View 9 Replies
View Related
Mar 28, 2013
I have been doing this project in X5 and was putting a still picture at the end. When I review the project it stops about a second or so from the end. I thought it was the song, so I took that out.
I changed the picture, did the same thing. I lengthen the time on the picture, it will place and stop about the same time from the end. Doesn't matter how long the picture is playing. If I take the picture out, the video just before it plays fine. I put a picture back in, and it does the same thing? I thought the project time may be set someplace? Doesn't seem to matter because I change the timing on the picture at the end. Stops the same place?
View 14 Replies
View Related
Mar 8, 2012
Certainly couldn't open an X3 in X4. If I wanted to edit/burn my X4 in the "faster" X5, why should I essentially start from scratch to take advantage of X5?
Project would be SAVED as an X5 project file, of course.
View 11 Replies
View Related
Jul 12, 2011
I add a video to the timeline video track (not the overlay track), and with 'clip' selected and playing... I have audio just fine, for the most part... sometimes the audio jumps and skips, and sounds garbled. With 'project' selected and the video playing, either the same thing happens as the 'clip' or there is no audio at all.
What I have discovered, is that this is common with AVI files. Other files, such as WMV, don't seem to have this problem. It affects only AVI files. The video plays just fine in WMP and VLC, as well as other video editors such as PowerDirector... so why dos VideoStudio have this odd sound issue? And I'm sure as Hell not gonna convert all my videos to WMV just to edit them.
This is on a fresh install of VideoStudio Pro X4 (as well as Windows), no updates, no Service Packs, no nothing... even WITH SP1 it's still does it. I've also removed and reinstalled my codec packs (from K-Lite to Shark007) with no difference.
I've also hear that people are now having this issue with VS Pro X3 as well (I have X3 to) so I assume it's pointless to install X3 as well. I really do NOT like using any editing software other than X4, since it's the best one I've used... so I do not want a reason to use something else.
View 5 Replies
View Related
Jul 16, 2008
I've recently upgraded the PC and re-installed VS10 onto the new, improved, beast in front of me now, but have hit a hurdle.
Whether I'm looking at an imported project or starting a new one from scratch, I seem not to be able to get the audio tracks to play when playing the project as a whole.
I can select the music track and play it from within the timeline without a problem, but select the project and all I get is the sound of silence.
after scanning and searching the forum I can't find anything that fits my bill so far.
Drivers have been checked and updated where found wanting. I'm at a loss to explain why. I never had this problem back on the old slow-coach...!
For info I'm running Vista on a dual core 2600Ghz machine with Asus P5K Pro 'board (on-board audio) and a GeForce 8600 GTS graphics card.
View 14 Replies
View Related
Sep 3, 2012
I'm green with Videostudio as i use pinnacle before.
The version I use is X5, I want to make a very good quality photo album with the videostudio, I want to make the blu ray, what do I need to set before I start the project? What resolution should I set and where can I set? someone said the AVCHD is the same as bluray, I don't know!
View 2 Replies
View Related
Jul 29, 2013
I recently upgraded to x6. My question is, there were some hd project templates that came with x3 that id like to use with x6. How to do this, or import or find the files?
View 5 Replies
View Related
Apr 11, 2011
I want to burn my project I have created on VSX4 to a DVD. I don't want to create a menu or add chapters or anything else, I just want to burn my project to the DVD. I have followed the instructions in the user guide to bring my project in to be burnt, but the next button remains greyed out so I can't go to the next step to enable it to be burnt.
View 5 Replies
View Related
Mar 20, 2011
I finished the DVD, looks great, now I want to make another DVD the next day. How do I recover the project? In VSX3 made it really easly to recover DVD projects with all the menus, chapters and any other setting. Where does VSX4 save the finish project at?
View 2 Replies
View Related
Nov 4, 2011
I have VideoStudio X4 pro, think the sales man did a great job as i'm a beginner and man o man this isn't what i thought it woud be I'm trying to save my pictures to cd, it burns in and when i go to play it on the video, it won't work, just comes up black? Have slected create disk image, have used the cd-r before to do a similar thing and it won't work.
View 3 Replies
View Related
