Photoshop Elements :: Loading Project Stuck On 100%
Mar 1, 2013
I will load a project and then have to wait and wait. and wait
Eventually the project will load, but first it will prompt with "Where is the file 0000026.MTS" . I just click skip then. This issue is probably unrelated to my loading problem though....
My PC has 16GB of RAM. Intel Core i7 - 2600 @ 3.4GHz I have a Sony camcorder that creates the avchd format
Is there anything I can do to speed up the process? So far I have disabled Antivirus scanning. I have also loaded latest drivers and firmware for all PC components. Adobe Premiere Elements 9 is also up too date with patches
View 1 Replies
ADVERTISEMENT
Jul 24, 2013
Im on windows 8 64bit. I'm currently on the CC trial but was planning on signing up for the subscription this week. However After updating my apps this morning I have been unable to load Photoshop CC. It gets stuck at "reading preferences..."
Premiere Pro and After Effects were updated and were running fine afterwards.I have tried restarting my system, reinstalling the app and I have also uninstalled everything and done an adobe cleanup tool run and reinstalled just photoshop. But still the same issue?
View 2 Replies
View Related
Aug 27, 2012
When I try open AutoCad, at first it loads fine, doing all the pulg ins and that, then just stops.
The text in the corner just says "Loading", and I've left it for hours an it really isn't.
View 4 Replies
View Related
Mar 24, 2013
I did a clean install of VS Ultimate 6 after completely removing VS Ultimate 5 from my system. Boy, do I wish I had not done that!
After installing VS 6 and all of its extras, it starts up fine. But when I load project (VSP) files I had created using VS 5, it starts populating the timeline with clips and then hangs hard. It never comes back … i have let it start loading before bed, and the hourglass is still spinning when I wake up the next morning. Have to forcibly close it.
Not all VSP files will hang VS 6. Just the most important two projects. Periodically, as I'm developing my project (and a separate parallel project), I will create my own work back up by doing a File Save As with a new number at the end of the file name. I am presently working on Act I v14. I have verified that v1 thru v3 work fine, but v4 thru v14 all hang VS 6, as well as Act II v1 thru v8 (which is all of them). These two projects represent hundreds of hours over the last 10 months. If I have to start over, I will kill myself or start drinking again or something.
I would remove it and reinstall VS Ultimate 5, but I am unable to locate installation disk #1. I have my serial number stored away in a CodeWallet database, but the disk is mislaid somewhere in this debris field that is laughingly called my home computer room. So, how I could download, VS Ultimate 5 disc #1,
Windows 7 Ultimate w/SP1 and all updates (64-bit operating system)
AMD Phenom II X4 925 Processor 2.80 GHz
AMD Radeon HD 6450 display adapter
8 GB RAM
104 GB system drive (7 GB free)
833 GB second drive (459 GB free)
View 11 Replies
View Related
Nov 15, 2012
In my office of about 30 computers and over the course of about 10-12 months we have been experiencing a problem with project navigator. When opening ACAD or changing projects about 60% of the time it gets hung up and the load bar perpetually loads over and over again. If just left to run it takes 5-10 mins to load the project then ACAD will crash after a couple of commands. If opening the task manager and ending the program it will often freeze the computer for about 5-10 mins as well.
We have been actively using the project navigator for years and not until the last yr have we been having this problem. We bought pretty much the whole office new computers a few months ago and the problem still exists. We are running AutoCAD Architecture 2012 and our machines are window 7, intel core i7 3.5 GHz, 8 GB ram, 64 bit operating systems, with a Nvidia Quadro 2000 graphics card. So our machines are solid.
View 8 Replies
View Related
Oct 26, 2012
Just deleted PR4, and installed PR5.Opening an existing project takes an extremely long time (maybe 20-30 mins? guessing here)The Smoke loading screen shows something like "Connecting Control Surfaces"..
View 9 Replies
View Related
Jun 20, 2011
Recently we have switched from VBA to iLogic code. We have stripped out all of the VBA code, but when parts and assemblies are opening there is a big delay and the words "Loading VBA Project" is displayed at the bottom of Inventor.
Is iLogic or some facet of Inventor 2012 still using VBA Projects? If not, then can I disable this to shorten the amount of time it takes to open models? If possible how would I do this?
Using Inventor 2013
View 5 Replies
View Related
Aug 19, 2013
Every time I load any project (even one I saved and closed 5 minutes ago) After Effects resizes the window. I would like to disable this 'feature' how do I do that?
View 2 Replies
View Related
Feb 17, 2013
I can no longer access the organizer function of my PE 8. I received an error message and it just doesn't open. I sent back the error....no one has assisted. The Edit function still works and pulls up. The old photos are still in the system, but I can't pull up my albums.
View 2 Replies
View Related
Nov 26, 2012
just upgraded from elements 8 to 10 and it wont allow me to work in the organizer, stuck on installing people recogition
View 18 Replies
View Related
Mar 28, 2013
I recently reinstalled Photoshop Elements 9 on my new Windows 7 sytem which replaced my old XP system which was hit by lightning and destroyed. It worked fine to start with, then on the second day after the system had gone into sleep mode( not the first time) and I woke it up, I could not bring the organizer up out of the Taskbar. I tied to restart the system to recover but it hung up say saving settings and eventually I was forced to hit the reset button to get going again.When I try to start the organiser again from the welcome screen it just goes into the taskbar and stays there. The editor comes uo fine, but thats not much use without the organiser. I noticed when I tried to bring up the organiser the Task Manager showed that the organiser was running and using 49% of the CPU time but that eventually stopped and the organizer still won't come up.
View 1 Replies
View Related
Mar 13, 2014
My type is stuck in all caps - Photoshop Elements 12. I cannot find a reset tool - there doesn't seem to be any option to reset in the tool options fly out menu.
View 2 Replies
View Related
Oct 2, 2013
After opening a .jpeg file, I'd like to add text. No problem adding text. The problem is editing the text. Apparently, PhotoShop Elements 10 gets stuck on one font. And it can't be changed. When clicking on the down arrow (to change the font), the User Interface "jumps" up and down. But, the font won't change. I am able to change the color of the text, but not the font. I checked my System and there's no problems. I even did a Virus scan...none found. Is there a setting from within
PhotoShop Elements 10 that I'd be able to import the fonts on my System ?
My System : Windows 7 Professional / 32-bit and 3 Gb RAM.
View 1 Replies
View Related
Jun 24, 2013
I use the eyedrop to fix the photo in cs4 version. sometimes the eyedroper is stuck on grey mode and I dont know how to change it back to the regular mode where I can copy the color with it
View 1 Replies
View Related
Aug 7, 2013
All of my fonts in elements are stuck on all capitals letters, my capital locks is not on and they are fonts that usually have lower case..
View 1 Replies
View Related
Feb 15, 2013
Two images files I was working on are stuck in Auto import into iphoto. They will not import into iphoto nor can I delete them. Everytime I try to use Adobe or iphoto it try's to import.
View 5 Replies
View Related
Mar 17, 2014
I have a PSE 12 file stuck in the "edit mode". I ran completed a repair and an optimize on the catalog and the file is still stuck in the edit mode--I can't even delete the file from the catalog as the "delete" option is grayed out.
View 1 Replies
View Related
Jan 2, 2014
It has crashed my PC 4 times now. I did a system restore but the same.
View 11 Replies
View Related
Nov 12, 2013
Just got PSE 12, I have added mutliple brushes without difficulty. But I can not get the ASL files I want to add to show up. I have loaded them into the correct folder in presets but they are not showing when I open 12.
View 1 Replies
View Related
Mar 8, 2013
Elements editor workspace will not load.
View 2 Replies
View Related
Dec 7, 2013
I'm trying to create my own set of Patterns in a .pat file.It doesn't work as the instructions say.But with an immense amount of effort, going about it in a roundabout way to get past security nonsense and locked files that weren't locked, I managed to create a .pat file with my Patterns in the proper folder. I couldn't do this directly. Instead I added my Patterns to an existing .pat file with the idea of later deleting those that aren't mine and restoring the original .pat file to its original state.However, I can't load my .pat file or any other .pat file. That is, the Load function doesn't work, so I can't have my own Patterns in a .pat file that I can access.I've tried to load the ,.pat file using the Preset Manager, using Layer > New Fill Layer > Pattern, and using the Paint Bucket tool, but the selected .pat file doesn't get added to the list of .pat files that can be used. What is the Magic Word to get a .pat file to Load?
View 6 Replies
View Related
Mar 25, 2011
I have Elements 9, running on a Windows 7 64 bit PC.
In organiser if I select Preferences from the Edit menu or by pressing Ctrl-K a small window comes up saying loading, but the preferences window never shows. Windows Task Manager shows that Elements is still running and the processor load is about 15-25% and so it would seem it is trying to do something. So far I've left the machine for over an hour and the loading window never goes. The only way to close Elements is to use End Task in Windows Task Manager.
I've tried deleting the preferences file in /Users/User name/roaming/Adobe/Elements Organiser/9.0/Organiser/. I've also tried uninstalling, deleting all of the Adobe Elements files within the roaming profile and reinstalling. Neither of which has worked. Apart from this Elements works OK and I can access the Preferences in the Elements Edit programme.
I have just installed the latest update and this made no difference.
I could definitely access the preferences window when the software was first installed. The only thing I can think of that has changed (apart from the usual Windows updates) was the installation of a trial copy of Lightroom 3, which I've now uninstalled.
View 5 Replies
View Related
Oct 31, 2012
I am having PSE 11 "stop working " when launched. Seems to be related to corrupt catalogs. If I delete the catalog, then I am able to open up the Organizer. However, when I build a new catalog, it oftens crashes. I have disabled all the analyzer functions but keeps recurring. I have been successful in building a small catalog consisting of approximately 400 JPGs. However, larger catalogs aren't successful.
View 2 Replies
View Related
Mar 23, 2013
I just bought a new laptop in July. Got Elements soon after. I have been taking digital photos since 2006. I have over 7,500 photos. I have used all of my online storage.
1. How do I get Photoshop to look at my hard drive for photos?
a. How do I use the online storage as a backup of, say, photo albums?
2. How do I get Elements to stop loading ALL 7500 photos every time I open it?
I'm using DSL, so you can imagine how incredibly SLOW EVERYTHING is in Elements.
I'm still trying to figure out how to organize everything. I stopped using it for a few months becuase I got so frustrated. But now I've scanned in more photos (75) and I have to finish my mom's scrapbook. I've read parts of Elements for Dummies, but I still don't get it.
View 4 Replies
View Related
Mar 30, 2013
Any solution to the endless pinwheel in 11 Editor (updates installed)? I load a previously created PSD file, move a few layers around and the endless pinwheel appears. Have to Force Quit.
MAC OSX 10.8.3
View 1 Replies
View Related
Jul 20, 2013
I just bought elements11, installed it and imported photos from folders, when i wanted to check/change preferences the program hung up 'loading' . my computer meets system requirments according to the box.
View 6 Replies
View Related
Feb 18, 2014
Just installed elements 12 (on windows 8), built a catalog but can't load jpg files taken on an LG phone. The pictures load into picture viewer and into elements editor (at which point they are then in the catalog), but I can't import directly.
nothing was imported, the file or folders selected to import did not contain any supported file types or the files are already in this catalog.
the files are jpg and they are not in the catalog.
Ive noticed (scanning the forum) that other people have had issues with LG phones in previous versions of elements
View 3 Replies
View Related
Nov 23, 2012
Is it possible to load a MPEG-2 TS-video (.ts) file in the Program Adobe Photoshop Element 10, until now the program refuse to load such a file and do not recognize is. I have some films loaded from satellite TV and like to remove the commercials, that is the reason that i buy this program.
View 1 Replies
View Related
Aug 31, 2012
How can I prevent Photoshop 7 from loading all pictures on computer into catalog?
View 6 Replies
View Related
Feb 4, 2013
I have recently bought a Canon 650D and I am now unable to load CR2 Raw files in to Elements 10 for editing-it is coming up with a message "Cannot open ....... CR2 because it is the wrong type of file. I have not had this problem before.
View 12 Replies
View Related
Feb 27, 2014
I have just upgraded from PSE10 to PSE12 and now when I use the Slide show (full screen) in organizer with Fujifilm Raw files it take about a minute and a half to load up and same again when you zoom in. Is there any way of speeding this up in PSE12? It was slow in PSE10, but it did take over a minute in total.
View 21 Replies
View Related
