Two images files I was working on are stuck in Auto import into iphoto. They will not import into iphoto nor can I delete them. Everytime I try to use Adobe or iphoto it try's to import.
View 5 RepliesI'm using LR4 with a Canon camera setup (Wind 7 Ultimate). I've got the auto import setting all configured with an incoming folder and destination. The app recognizes when an image is put in incoming folder and in fact it moves it to the destination folder. What is really annoying is that it leaves me at the import settings dialog and then I have to make all these choices as I would if I were manually importing.
Shouldn't the images be places in the desination folder and some view of that image be displayed in LR? It could be the folder view or ideally I want to see the last image imported at 1:1 size so I can review it and see if I want to take another shot? Maybe there is some flag I've got set incorrectly.
Why can I import images from my scanner in Adobe Elements 11 in the organizer but not in the photo editor? I have Windows 8 64 bit.
View 2 Replies View RelatedI am unable to import my images to my new computer that I reinstalled elements 9 to. My computer is an HP 64 bit running windows 7.
View 10 Replies View Relatedin elements 11, how do i change settings to import images directly from scanner?
View 3 Replies View RelatedI am unable to import raw files to E11 from my Panasonic Lumix 200. I get a response that says "nothing imported - no supportive file types" also "can't complete request as file appears to be from a camera model which is not supported by installed version of Camera raw". I think I understand that I need at least a 7.2 version and don't know what I have. The camera is a fairly recent model.
View 6 Replies View RelatedElements 8 does not recognise an SD card with photographs to import. Is it short of a Plugin. If so, how do I get it?
View 7 Replies View RelatedMy Canon digital camera uses a removable memory card which I then put into an Inca Card Reader. When using Photoshop Elements 11 and try to open the Card Reader to import images, the Card Reader isn't even listed among the various drives attached to, or within, my computer? How can I fix this? I want Photoshop Elements 11 to recognise the Card Reader so I can import the images.
View 3 Replies View RelatedStarting up, how do I import images (in folders and albums) from iPhoto to PSE 11 without creating a chaos?Should I un-install iPhoto afterwards?
View 2 Replies View RelatedAll of sudden, PSE9 stopped importing images, says 'import failed'. I tried to reload PSE9, no change. Tried deleting & reloading PSE9, no change.
View 4 Replies View RelatedHow can I import images from iphoto without losing the albums and folders I already created?
View 2 Replies View RelatedUsing PS Elements 10 on my Mac OS 10.6 I cannot import images from my Epson CX 7450 scanner. Have had no such problem with PS Elements 8. When I select file, import, the options are limited and the scanner is not listed.
View 3 Replies View RelatedI use Auto Import to import my RAW files. Each time LR imports my files the Previous Import count number increases. Is there a way to reset this count so it shows a true reflection of the photos from my previous import session?
Correct me if I'm wrong but if you manually import files the Previous Import count number resets itself automatically. I've Googled this problem & this question has been asked before - all users were utilising Auto Import.
I can no longer access the organizer function of my PE 8. I received an error message and it just doesn't open. I sent back the error....no one has assisted. The Edit function still works and pulls up. The old photos are still in the system, but I can't pull up my albums.
View 2 Replies View Relatedjust upgraded from elements 8 to 10 and it wont allow me to work in the organizer, stuck on installing people recogition
View 18 Replies View RelatedI recently reinstalled Photoshop Elements 9 on my new Windows 7 sytem which replaced my old XP system which was hit by lightning and destroyed. It worked fine to start with, then on the second day after the system had gone into sleep mode( not the first time) and I woke it up, I could not bring the organizer up out of the Taskbar. I tied to restart the system to recover but it hung up say saving settings and eventually I was forced to hit the reset button to get going again.When I try to start the organiser again from the welcome screen it just goes into the taskbar and stays there. The editor comes uo fine, but thats not much use without the organiser. I noticed when I tried to bring up the organiser the Task Manager showed that the organiser was running and using 49% of the CPU time but that eventually stopped and the organizer still won't come up.
View 1 Replies View RelatedI will load a project and then have to wait and wait. and wait
Eventually the project will load, but first it will prompt with "Where is the file 0000026.MTS" . I just click skip then. This issue is probably unrelated to my loading problem though....
My PC has 16GB of RAM. Intel Core i7 - 2600 @ 3.4GHz I have a Sony camcorder that creates the avchd format
Is there anything I can do to speed up the process? So far I have disabled Antivirus scanning. I have also loaded latest drivers and firmware for all PC components. Adobe Premiere Elements 9 is also up too date with patches
My type is stuck in all caps - Photoshop Elements 12. I cannot find a reset tool - there doesn't seem to be any option to reset in the tool options fly out menu.
View 2 Replies View RelatedAfter opening a .jpeg file, I'd like to add text. No problem adding text. The problem is editing the text. Apparently, PhotoShop Elements 10 gets stuck on one font. And it can't be changed. When clicking on the down arrow (to change the font), the User Interface "jumps" up and down. But, the font won't change. I am able to change the color of the text, but not the font. I checked my System and there's no problems. I even did a Virus scan...none found. Is there a setting from within
PhotoShop Elements 10 that I'd be able to import the fonts on my System ?
My System : Windows 7 Professional / 32-bit and 3 Gb RAM.
I use the eyedrop to fix the photo in cs4 version. sometimes the eyedroper is stuck on grey mode and I dont know how to change it back to the regular mode where I can copy the color with it
View 1 Replies View RelatedAll of my fonts in elements are stuck on all capitals letters, my capital locks is not on and they are fonts that usually have lower case..
View 1 Replies View RelatedI have a PSE 12 file stuck in the "edit mode". I ran completed a repair and an optimize on the catalog and the file is still stuck in the edit mode--I can't even delete the file from the catalog as the "delete" option is grayed out.
View 1 Replies View RelatedSo I'm trying to do a face blend and I've repeated the process three times in order to make sure I'm not making any mistakes, but I still can't auto blend the two layers.
Any time I go Edit, auto-blend layers it's greyed out which is quite frustrating. I've taken a couple of screenshots to illustrate my problem. I am using CS6 on a new MacBook Pro.
Is there a way to auto number files with the file number (less .jpeg) and save without having to let my computer grind to a halt, as it does using Automate, contact sheet. The objective is to create a preview set for distribution to clients with the file number annotated at bottom centre. Also, is there any way of creating the text/font/colour/stroke of my choice?
View 5 Replies View Relatedi have used batch process to make a whole bunch of photos one size. I need to create a single 'photo wall' jpg out of them in which they're all tiled, the long way of doing this is to obv open them all and copy, paste into the psd, then flatten, but thats really, really time consuming. If photoshop had any type of auto import & tile feature? I may have to do this a 2nd time with 1000's of images.
View 10 Replies View RelatedI'm really hoping someone might have an answer for me on this one. For the past few months, Photoshop has been auto-adjusting my images. The colors/skin tones look absolutely awful. I have had to adjust every picture to get a non-alien look to them, but they still never look as good as what was in the camera. Has anyone experienced this? If so, were you able to find a fix? I'm a PC user - don't know if that helps. Here are a couple of examples:
When viewing them in bridge, the colors look normal (pics on left side)
Then when I click on the picture (not even opening it), the color automatically changes (pics on right)
I have tried pulling an image up just through Photoshop, but the same thing happens. I work in RAW, but have noticed it happening to the JPGS as well.
I've been using Photoshop for my Photography for quite a long time and I have recently upgraded to Photoshop CS6. Whenever I resize my images in CS6, I get the feel (from looking at the images) that the application has autosharpened my images! I am quite sure about that effect because my resizing principles have remained the same since using CS5. And in CS5, whenever I resized to that same size I am resizing in CS6, I used to run the Unsharp Mask Filter to get my images look at their best! So there must be something going under the hood in CS6, or am I missing something obvious? Basically, I want to be in total control as to how much sharpness I want to apply to my resized images!
View 4 Replies View RelatedPhotoshop and Bridge CS5 does not rotate SOME of my vertical images. Most other photos taken in the same time frame and with the same camera display perfectly. Orientation is checked for display under Preferences, Metadata, Camera Data.
There also seems to be a discrepancy how Orientation is described under Metadata for those images which DO auto rotate : sometimes it is -90 (which is how I hold the camera for verticals and which displays on most verticals) and sometimes it is "normal" even when it has auto rotated the image. I do not understand this difference."Normal" is also used to describe the orientation of those images which DO NOT auto rotate for viewing.
The photos in questions were taken using a Nikon D-300 which is programmed to indicate the orientation of the camera and has always been programmed to do so. I know I can manually change the orientation but we are talking about hundreds of images (I have over 10,000 photos in all; most of which display fine).What should I be looking for to explain and correct this issue?
I am receiving a bunch of raw scans and the first thing I need to to with it is cropping them into individual images. We are talking hundreds of photos, with 6+ images on each raw scan. Doing it manually takes time and might not be 100% accurate. One should think some kind of software was made able to do this automatically (PS plugins?)
I suspect I *might* have to resort to something other than Adobe * - but in desperation I am trying this forum anyway..! It would be GREAT to be able to just do this repetetive work in one batch.
This seems to have been a problem with previous lightrooms and thought it may have been fixed in LR4 but I can't seem to find the option?
What I have a gripe with is why when I am exporting my editied raws into what ever jpeg format I want (highres low res etc) I put these in a folder with in the orgional raws parent folder and call it "02 - High_Res" for example. To then get this to show in the lightroom folder structure you then have to 'sync' the folder. Is there a way to have this done automatically? Is there a way I can just get it to appear with out syncing?
my workflow is to copy all photos from my camera to a folder that is configured for auto import.Lightroom takes these pics and import them to the library.But it does not exclude duplicate photos. If I copy the same photos to the auto import folder again, LR imports all photos again.
Why can't I configure to exclude duplicates as it works with the manual import function?