Photoshop :: Does CS6 Auto-sharpen Resized Images
Jan 12, 2013
I've been using Photoshop for my Photography for quite a long time and I have recently upgraded to Photoshop CS6. Whenever I resize my images in CS6, I get the feel (from looking at the images) that the application has autosharpened my images! I am quite sure about that effect because my resizing principles have remained the same since using CS5. And in CS5, whenever I resized to that same size I am resizing in CS6, I used to run the Unsharp Mask Filter to get my images look at their best! So there must be something going under the hood in CS6, or am I missing something obvious? Basically, I want to be in total control as to how much sharpness I want to apply to my resized images!
View 4 Replies
ADVERTISEMENT
Dec 27, 2012
Is there a resize script?We normally get images that has to be resized also based on conditions.
View 1 Replies
View Related
Jul 22, 2013
Software & Version: Adobe Photoshop CC
OS: Windows 7
I have a bunch of images which need to be resized - all to 300x195 px at 300 dpi in .jpeg formatAll the images are of different sizes in their original form.While resizing, there should be no distortion. The scaling needs to be in proportion.While saving the resized, all the images should be saved using the same naming convention. Here's how I am doing it...
1. New Blank document - 300x195px, 300dpi & RGB mode.
2. Drag all the images into the blank document, and middle-align each layer.
3. Resize each layer individually while holding Shift+Alt to do it proportionately.
4. Save each layer seperately as a .jpeg using the naming convention required.
View 14 Replies
View Related
Nov 18, 2006
I'm doing some work in photoshop, well, more like fooling around with Photoshop. But when I'm all done with a picture, save it as Jpg and upload the image, its about 25%-50% smaller then what the original psd is ....
View 2 Replies
View Related
Oct 29, 2012
I'm working as a designer. Whenever I send images to my boss (usually jpgs saved in photoshop), she can't resize them. Is there a certain way I need to save them in order for them to be resized later?
View 3 Replies
View Related
Jan 27, 2013
Image Resizing-- UsingOSX 10.8.2 PSE 10--Cant save resized images--
View 3 Replies
View Related
Nov 20, 2004
I took pictures of about half of the exam (And that's all I need to pass since there was a flash project that was worth a lot of points and which I got right). But the pictures look REALLY blurry,
View 9 Replies
View Related
Nov 15, 2013
Ok... here is my dilemma. I am having an incredibly difficult time understanding the best way to sharpen, re-size and save my images for both posting on the web and giving them to clients. I completed my first paid photo shoot (yay!), but as I finished editing each image, I re-sized it and posted it on my FB photography page. I later learned from a fellow at my local print shop that this is a destructive and irreversible edit (not yay! ).
So... before I pull out every last strand of hair on my head, I REAALLLYYYY need to get a good grasp on how to do the following things so that I can establish a good workflow: 1. Sharpen my image well {w/ Smart Sharpen}. Does this have to be done on a flattened image... and isn't flattening irreversible? 2. Re-sizing my images for both web display and client work/printing. Is it true that once I set it to 72ppi for web display, that I lose a great deal of the detail and quality? Do I need to create a copy of the file and have 2 different image sizes?
I am self taught, learning off the cuff through tutorials and constant error... and I just want so badly to have a smooth and beneficial work flow in place.
Currently, my workflow is as follows...
1. Load images into LR and convert to DNG files
2. Quick initial edit & then send into PS CS6
3. Perform detailed/layered edit(s)
4. {I know I'm supposed to sharpen now, as the last step, but am afraid to permanently flatten my image in case I want to tweak the layers later..}
5. Save the file (unflattened)
6. Go back into LR and Export the file to the appropriate place on my hard drive
So... at this point, my image is still at 300ppi {not appropriate for web display}, unflattened {I'm told flattened images are ideal for client work and printing} and not as sharp as I want it to be {because I don't know when to apply Smart Sharpen filter}.
View 3 Replies
View Related
Nov 8, 2012
I manage a website and I have to resize bundles of images frequently. I find it a problem in Paint Shop Pro X5 that every time I resize an image it shows as a tiny thumbnail. This causes me to go to the 'view' toolbar and then from the dropdown box have to click 'zoom to 100%'
How do I format PSP X5 to automatically show resized images at 100%?
View 1 Replies
View Related
Nov 27, 2013
What is the difference between sharpen and sharpen copy in the presets section of LR? they seem to have the same effect, dont know which one to use
View 2 Replies
View Related
Jun 16, 2012
I am working with pure monochrome tiff images. The images are of handwritten letters captured from microfilm. The handwriting is faint in places, but the image density is pretty high (3400 x 4400 px). I thought that there might be a way to "fill in" the white space between the scattered pixels forming the faint areas--but I can't figure out how to do it.
Gimp (Ubuntu 12.04LTS) seemed to be the natural place to turn, but I am not a photo-editor.
View 2 Replies
View Related
Sep 19, 2013
So I'm trying to do a face blend and I've repeated the process three times in order to make sure I'm not making any mistakes, but I still can't auto blend the two layers.
Any time I go Edit, auto-blend layers it's greyed out which is quite frustrating. I've taken a couple of screenshots to illustrate my problem. I am using CS6 on a new MacBook Pro.
View 1 Replies
View Related
Nov 1, 2013
Is there a way to auto number files with the file number (less .jpeg) and save without having to let my computer grind to a halt, as it does using Automate, contact sheet. The objective is to create a preview set for distribution to clients with the file number annotated at bottom centre. Also, is there any way of creating the text/font/colour/stroke of my choice?
View 5 Replies
View Related
Apr 9, 2012
i have used batch process to make a whole bunch of photos one size. I need to create a single 'photo wall' jpg out of them in which they're all tiled, the long way of doing this is to obv open them all and copy, paste into the psd, then flatten, but thats really, really time consuming. If photoshop had any type of auto import & tile feature? I may have to do this a 2nd time with 1000's of images.
View 10 Replies
View Related
Sep 20, 2008
I'm really hoping someone might have an answer for me on this one. For the past few months, Photoshop has been auto-adjusting my images. The colors/skin tones look absolutely awful. I have had to adjust every picture to get a non-alien look to them, but they still never look as good as what was in the camera. Has anyone experienced this? If so, were you able to find a fix? I'm a PC user - don't know if that helps. Here are a couple of examples:
When viewing them in bridge, the colors look normal (pics on left side)
Then when I click on the picture (not even opening it), the color automatically changes (pics on right)
I have tried pulling an image up just through Photoshop, but the same thing happens. I work in RAW, but have noticed it happening to the JPGS as well.
View 3 Replies
View Related
Feb 20, 2013
Photoshop and Bridge CS5 does not rotate SOME of my vertical images. Most other photos taken in the same time frame and with the same camera display perfectly. Orientation is checked for display under Preferences, Metadata, Camera Data.
There also seems to be a discrepancy how Orientation is described under Metadata for those images which DO auto rotate : sometimes it is -90 (which is how I hold the camera for verticals and which displays on most verticals) and sometimes it is "normal" even when it has auto rotated the image. I do not understand this difference."Normal" is also used to describe the orientation of those images which DO NOT auto rotate for viewing.
The photos in questions were taken using a Nikon D-300 which is programmed to indicate the orientation of the camera and has always been programmed to do so. I know I can manually change the orientation but we are talking about hundreds of images (I have over 10,000 photos in all; most of which display fine).What should I be looking for to explain and correct this issue?
View 2 Replies
View Related
Jul 26, 2012
I am receiving a bunch of raw scans and the first thing I need to to with it is cropping them into individual images. We are talking hundreds of photos, with 6+ images on each raw scan. Doing it manually takes time and might not be 100% accurate. One should think some kind of software was made able to do this automatically (PS plugins?)
I suspect I *might* have to resort to something other than Adobe * - but in desperation I am trying this forum anyway..! It would be GREAT to be able to just do this repetetive work in one batch.
View 4 Replies
View Related
Feb 15, 2013
Two images files I was working on are stuck in Auto import into iphoto. They will not import into iphoto nor can I delete them. Everytime I try to use Adobe or iphoto it try's to import.
View 5 Replies
View Related
May 18, 2009
I have photoshop cs4 and I cannot find the Auto smart fix, auto levels, and auto contrast nor the adjustment for each that I had with photoshop elements.
View 10 Replies
View Related
Sep 20, 2012
I want to remove color from images to prepare them for being autotraced in AI.
Is there an advantage to using Image > Mode > Grayscale vs. Image>Adjustments>desaturate vs. Image>Adjustments>hue saturation and dropping down the saturation vs.
Image>Adjustments>Threshold for this purpose?
Do these all generally do the same thing, or would one of these result in a better job of turning my image to black and white with higher contrast?
View 1 Replies
View Related
Apr 13, 2012
I have hundreds of photographs to print ranging from 2x3" up to 8x10" and I want to print them all off on a 44" roll and cut them out individually.
All I want to do is point Photoshop to the folder and have it arrange the images in the most efficient configuration for printing automatically, allowing me to set the color management on the document and the dpi of the 44" wide picture before I print it.
View 1 Replies
View Related
Mar 24, 2013
I used to have CS5 on my computer, after which I used the CS6 trial, and I never had any problems when stacking images using Auto-Blend Layers -> Stack Images. However, I recently purchased a subscription to Adobe Creative Cloud and after uninstalling the old PS versions and installing Cloud, Photoshop freezes every time I try to stack images.
My computer has very good specs, runs Windows 7, and both the OS and PS are up to date.
View 18 Replies
View Related
Jun 10, 2008
I have 30 dirs, each of them with 4 thumbs in it. I want to make one big thumb of every 4 smaller ones, by resizing and fitting them together into square. Like
Thumb1 right next to Thumb2
below
Thumb3 right next to Thumb4
and then save that image.
Would you give me any direction how to do that? I'm with CS3. I did explore the auto and script options in the File menu, but still unable to get idea how to do that, if possible at all
View 4 Replies
View Related
Aug 8, 2013
IN Lightroom 5. I am in the Library Module, in grid view. If I select an image, after a short pause a second image is selected with no input from me and the sync setting buttons become live. I don't think that I have changed my settings anywhere.
View 1 Replies
View Related
Dec 17, 2012
A few days ago I updated Lightroom to version 4.3. Since then, the "auto save to xmp" doesn't work. It is checked, but I keep finding files that "have been changed recently". So not only that it's not auto-saving them, but it is also finding "new images" that "have been recently changed" even though I didn't open or edited them in the past several months..
View 8 Replies
View Related
Sep 30, 2012
I have a working "watched folder", established through Lightroom's auto-import settings. When I place an image into that folder, it is imported into my lightroom catalog.
However, if I put a folder of images into that watched folder (i.e. "James and Stephanie" is put into a "wedding" folder), nothing happens. I do not want all of my images in one single folder; that's why I have Lightroom, so they can be organized in folders but collected in a database.
I also do not understand why Lightroom wants to move auto-imported images into a destination folder.
I would like to drop a folder into the "watched folder" and have Lightroom import (without moving the image) into my catalog.
I was surprised to not find this issue in Internet searches; is it dreadfully obvious, or is there a better way that I'm not familar with?
View 3 Replies
View Related
Jan 30, 2013
We have recently upgraded from Photoshop CS4 to CS6.When I select a text layer, from the Layer Panel, with a font size of 10pt, but if I select the type itself (edit mode) it shows as 8.63pt.Intrestingly the Info Panel shows width/hight to be 115.8%.
The text box has not been resized at any point and the document was created in CS4.
View 6 Replies
View Related
Dec 2, 2006
I have version 8 cs.
I have resized a photo to 406 x 305mm with the image size & canvas size dialogue box set correctly, but when I print the image it comes out as 240 x 170mm.
I have tried every printing option to get the correct print, but it just aint happening.
I have tried scaled to fit media (on & off), custom printing size, a3 printing size.
View 2 Replies
View Related
Jun 2, 2008
In Photoshop CS3, I crop or use the Image Size to get, say a 5"x7" image at 300 dpi. Then I do a "save as" as a jpeg image. Then I re-open it and it's not 5x7. Instead it's 8.75" x 6.25". When I look at Image Size again on this new, previously saved file, it displays 8.75" x 6.25" at 240 dpi.
I uninstalled and re-installed Photoshop CS3. I looked at my preferences to ensure it was displaying in inches and not centimeters. It is.
One thing to note is that this once worked and now it does not. I'm running with version 10.0 on Windows XP.
View 6 Replies
View Related
Jul 8, 2013
I was using these tool on a lot of images, because they often seemed to vastly improve them, making the colors pop on otherwise somewhat dull ones, and getting rid of unwanted color casts..
Later though I noticed that it is often at the cost of burning out hightlights in some areas beyond salvation.I also find shadow /highlight sometimes does this also.
Then I tried to protect some small areas with a mask before proceeding, but it seems that I can't find information on just painting a mask, but only videos with much more complex adjustment such as the Russel Crow or Lynda ones with maintaing hair detail while superimposing images, which is way beyond what I need in these cases.
If I try the wand to select and inverse I get unnatural looking divisions. Is it a matter of feathering to the right extent?
View 4 Replies
View Related
Aug 18, 2006
and when I resized it to the right one it pixelates. anyway to get rid of this?
View 1 Replies
View Related
