In any case, when I try to enable System Audio in the screen capture setup, I get an error message saying that it can't find any system audio.
System audio is working fine on my system, and neither Camtasia, CamStudio nor two other screen capture applications that I use have any problem with this whatsoever.
In Video Studio 5 Ultimate, I am trying to use Screen Capture on an application that plays music and has a window with an animation showing the chord progression as it plays. When I try to capture it using Voice as the Audio Settings, it works but the sound is low quality. I assume the reason is that it is recording the microphone listening to the speakers. If I use System Audio as the Audio Settings, then there is no sound in the captured video. I have verified this using Windows Media Player on the clip as well as in Video Studio 5. The sound _is_ coming out of the speakers, and the video part is OK. There _is_ a stereo sound track in the .wmv file that is created, but it is silent.
I get the same result trying to capture Windows Media Player playing a video clip that has sound. It captures the window and the video successfully, but there is no sound. On the other hand, I am able to capture the sound using other programs, such as Freecorder. Thus there is likely nothing wrong with my setup or drivers (and it can be done).
This is on Windows 7, 64-bit. I do not get any message saying System Audio is not available, as I have seen in other posts.
Now starting to use X5 and found that the "Screen Capture", which is so handy, has audio problem when I capture a person speaking, such as an instructional video. It says it won't record audio if you have Windows XP. So I improvised by using my mic, holding it close to my speaker. Only, the recorded speaking is out of sync with the captured persons lips moving. Regarding this, may I recommend and hope that Corel will do what Pinnacle has done long ago for syncing sound with video... when it's not in sync as in Screen Capture. True, In Corel's Pro X5 I can split audio from video, which sends it to the narration track, which is NOT always available. But in Pinnacle, in their video track on the timeline, I was able to lock the "audio wave form" in the video track, as well as lock and unlock the video track separately. So I was able to unlock the audio in the video track and move only the audio, left or right, until it synced with the video. It made things so much more easy then trying this when the video audio is in the narration track.
View 12 Replies View RelatedI just wondered if there's a way to get Video Studio 11.5 to capture video from your PC screen?
I ask because I've been trying to find a free program to do this (not having any money for stuff like Camtasia) when I remembered that I had Ulead Video Studio 11.5 - and I hoped that could do this instead.
Can it? If it can, can it also record audio at the same time? (I have a headset with Microphone)
I make gaming Youtube videos, and recently bought a new computer and needed a new recording software. So I started looking into Video Studio. I am currently using the trial, but will really soon get the full version. So I was gonna record and noticed you can change what audio will be recorded. Cool! So I enabled both of them, but it doesn't work. If I enable System Audio, microphone audio will be disabled, and vice-versa.
Is there any way I can record my game AND my voice without recording the my voice afterwards (I wanna record it live)? I quickly tried to record two video at the same time, each recording having a different audio, but it just recorded one. I don't wanna have to buy $37 Fraps or some other "just-for-recording" software.
I'm running VSP X5 Ultimate with SP1 on a Toshiba i7, 8GB RAM and plenty of HD free space. When using the Screen Capture function and, in Settings, switching to system audio, I get a message that no system audio is detected and that I should enable this on my computer. I'm assuming that "system audio" is the feed to the speakers (both of which are working perfectly) and I've been over everything in both Control Panel>Sound and Control Panel>Realtek (not much there) and can find nothing which would "enable system audio". I've never been able to record with the system audio. I searched the VSP forum with multiple iterations of the problem with no luck.
How can I get system audio working in the screen capture?
I wanted to use the capture screen feature but when I go to file-import-screen capture - the setup and capture features are grayed out and I can't get to set up. What can I do.
View 4 Replies View RelatedVersion 1.5.0.12 (the SP2 patch was installed). But I'm unable to figure out how to setup screen capture because that option is grayed out. I'm unable to complete Step 1 due to the latter issue. That is: File | Import | Screen Capture | Setup; I can never reach the fourth selection.
View 3 Replies View RelatedI have a problem with the audio of one of my video projects. During the actual video shooting, the microphone had acoustic problems and it is heard on the recorded clips.
I had split the audio from the video and want to use some audio filters on it to see if it works, but the audio filters choice on the clip menu is greyed out. How I can enable the audio filters
No Audio when capturing in VSX5. Also After I install the application any ac3 file or movie with ac3 audio will not play the audio.
View 8 Replies View RelatedI have been trying to capture both Video and Audio in Video Studio Pro X4. I have a program called Diamond One-Touch Video Capture V500 that uses a USB connection for the Video and Stereo output from my Sony Handycam Digital 8 Model DCR-TRV740. The one touch software works well to capture both the Video and Audio, however, I was hoping when I purchased the Corel Video Studio Pro X4, that I would be able to record both video and audio with the capture feature, since V500 Video shows under sources in the capture screen.why the Video Studio will not record the audio while the One Touch Video program will?
View 5 Replies View Relatedim trying to capture in VS x4 but i only get audio. no video is coming up on my capture screen but if i record, the recording will show video... video just wont show up in the capture screen inside VS x4.. i read where people couldnt see video if they were trying to capture DV and some were told to get windv or someother program to get the video but im not trying to capture dv.. im trying to capture video with my tv capture card, avertv hybrid volar max.. it captures the audio thru the vd x4 capture screen but not the video although if i do a recording both audio and video will play in the mpg.. why cant i see the video in the capture screen?
View 2 Replies View RelatedI'm trying to capture video from a VHS/DVD machine using an EasyCap (2.0 I think). I'm able to get video but it's pulling the audio from my computer's mic. I investigated settings and found that 1) the format resets to MPEG if I set it on DVD and 2) when I go into Options > Video and Audio Capture... and select the only option in the drop-down for Audio device that says USB, the program crashed. I opened it back up and saw that it was still set on USB for the Audio device, but when testing I didn't get the video's audio. I'm new to capturing video this way, am I missing something? I double checked that the cables are plugged in correctly.
View 1 Replies View RelatedI tried to test the recording feature.......i made a few tests but finally i saw that when i wanted to have voice in my recording.....wasn' possible and a message appears (no audio system detect.........) I am wondering why appeared this message and how i can recording audio also in my video?
View 4 Replies View RelatedHow do I get the audio as well as the video, I am using a VC500 capture device and the video comes in clear but no audio.
View 3 Replies View RelatedWhen a separate-system sound is used, how can it audio be synchronized with audio that is recorded on-camera? Is there a tutorial, procedure or technique to easily synchronize audio tracks from audio recorder into a video that already has audio?
View 1 Replies View RelatedI am an experienced user of X4 who needs to upgrade due to needing screen capture features. X5 download trial Install went fine, X5 works well on everything so far except the feature I need. I have disabled UAC, Run all programs as an admin. My system, while old, is capable enough. I use Win 7 64.
When using screen capture it will not capture system audio. I tested the mic and audio while in screen capture "settings" and while the mic works and records, X5 throws a "system audio not found" prompt when clicking on the system audio check. Again, microphone works fine.
Outside of X5, I checked and tested sys audio and it is working. In fact I tried a screen capture with Fraps and it records game audio and voice fine. In fact, while using the screen capture setting I can hear both the mic and voice perfectly.
I have a new issue with screen capture in VS pro x6. When I try to capture the sound from my computer i.e. a clip on (you tube) when I hit the record button (the red circle) I get this message:
it counts 3-2-1 then…at 1 (Prepare Record Failed!!! #15)
However it works fine if I disable it… when I record my voice when it is screen recording, no problem.
Also, when I try to record a game play, full screen, it stops once I launch the game, a message says that my screen capture is complete without me hitting the stop capture button!!
My computer is running win 7 Prem. Service pack 1 64 bit 12 GB RAM Intel core i7 @ 3.40 GHz
Setup: Designer Pro 7 on win 7 (64bit)
Trying to use the builtin screen capture tools under Utilities/Screen capture.
There appears to be no way to do a selected capture or partial selection of parts of a window. Instead we have:
Full screen []
active window []
content of active window [x]
So I selected the last one above as shown `Content of Active Window'
But what I actually get is a mini version of the entire Designer pro 7 application Including the menus, borders, and all that guff that no one usually wants in a capture of part of the full screen.
So what does `Content of active window' mean as apposed to `Active window'?
Its really unbelievable that there is no provision like `Region' found in most screen grab tools where you select with the mouse what you want captured.
Maybe I'm just missing how to use this thing, but have included the result of what a `content of active window' does. Its a mini version of the entire application...
I am using VSX4 and I wonder is it possible to capture the computer screen with this version? If not will any of the newer versions that will capture the screen? If not do you know of a program that will do that?
View 10 Replies View RelatedI'm trying to capture game video and am only getting 15 fps. Is there a way to change this setting?
I've looked in the pdf manual, the menus and can't find any information on this.
I tried searching the forums for "capture" and "screen capture" but those words a flagged as "too common"
I have been playing around with the screen capture fature of X5 Pro Ultimate and I am having problems.
When I set the capture to custom and then drag the frame/window or whatever you call it around the section I want to capture it always captures too high and then cuts off bottom. If I capture in full screen is there a crop feature?
The things I want to capture have a window within the full page and I am trying to capture just the window, ie. a Youtube or any other web based video. the dragghing custom isn't working and I see not crop option.
I am using X5 with win XP, I can select an area for screen capture but the record button is greyed out, nor will the f11 button start a recording.
View 14 Replies View RelatedThe Screen Capture feature did function at one time. Currently, the Screen Capture feature in not functioning for unknown reasons and, I'm not sure for how long it's been non-operational. The icon is available but when I click on it, nothing happens. I contacted Corel who suggested updating DirectX, Microsoft Visual C++ 2010, Microsoft NET Framework 4 web installer, and all critical Windows updates and re-try, which I did, and nothing changed. Also, if I re-install the software, does that affect my currently saved projects? Will VSP X5 be able to locate the media files I've utilized in the projects?
View 1 Replies View RelatedI would like to know if I can make screen capture videos with VP3 like you can with camtasia or one of those. I'm ready to download camtasia but I wanted to check here first.
View 2 Replies View RelatedAs I launch a videocapture on videostudio pro X4, I don't get any video display on my screen, only hearing the sound. Afterwards, the generate file is OK with picture and sound.
View 5 Replies View RelatedI have VideoStudio Pro X5 ultimate. Build # 15.1.0.34 I have upgraded my operating system from Windows 7 to windows 8. On windows 7, Screen Capture worked just fine. On windows 8 it does not operate. I get a message as follows: “VSSCap. Prepare Record Failed!!! #42” How can I get Screen Capture to work on my Windows 8 system? All other functions of VideoStudio Pro X5 seem to work OK. I tried to submit a question to Corel as to what this Error code means and how to correct the problem but they say "NO TECKS AVAILABLE TO ANSWER YOUR QUESTION" And just log me out?
What "Prepare Record Failed!!! #42" means and or how to correct it? It seems to me that if Corel gives you an error message then they should support that error but they do not! Why don't they? They say that Windows 8 and VideoStudio Pro X5 Ultimate are completely compatible then why am I getting this message. Corel really should support it's message errors and not let its customers struggle for an answer? I love VideoStudio Pro X5 Ultimate and try as I may I cannot solve this problem.
Maybe I am just missing something but I am only able to record when I play any game when it is in a windowed mode, no matter the size, but does not record any game that is in a full screen mode. No matter if I select a specific part of the screen it or default full screen to record it will just record the background not the game. Also if I try to force the screen capture to the game specific it will try to switch to it then back to the screen capture menu with nothing recorded or changed.
I am using VideoStudio x5 pro version 15.1.0.34
Win8 64-bit
i7-3770k @3.5
ASUS sabertooth z77 mobo
8GB DDR3
Radeon HD 6970
Two quick questions:
How do I capture a screen, or frame and how do I get to the help files?
I downloaded the trial version of VS X5 in hopes that I could consolidate programs. I have and use Camtasia Studio for screen capture and have no problems other than it's expensive and much more than I need. I was hoping X5 would be the program that consolidated screen capture and video editing at a very reasonable price.
The problem I'm having is when I use screen capture to record a downloaded video (as an example) I get no sound. I have no problem when I use the screen record function set to capture sound over the mic (voice). If I record the same video with Camtasia Studio I have no sound problem.
I've been trying to solve this off and on for over two weeks. It would seem that if Camtaisa Studio has no problems Video Studio X5 shouldn't either.
Had a problem when screen capture stopped working, stating that I had an audio problem, so I uninstalled X6 Ultimate and reinstalled.
Screen capture is now working EXCEPT that as soon as the recording starts, red flashing cross hairs appear which I cannot remove and they show on the captured video. This did not happen before when screen capture was working. Is there a resolution on how to stop these cross hairs from appearing.