I tried to test the recording feature.......i made a few tests but finally i saw that when i wanted to have voice in my recording.....wasn' possible and a message appears (no audio system detect.........) I am wondering why appeared this message and how i can recording audio also in my video?
View 4 RepliesWhen a separate-system sound is used, how can it audio be synchronized with audio that is recorded on-camera? Is there a tutorial, procedure or technique to easily synchronize audio tracks from audio recorder into a video that already has audio?
View 1 Replies View RelatedIn Video Studio 5 Ultimate, I am trying to use Screen Capture on an application that plays music and has a window with an animation showing the chord progression as it plays. When I try to capture it using Voice as the Audio Settings, it works but the sound is low quality. I assume the reason is that it is recording the microphone listening to the speakers. If I use System Audio as the Audio Settings, then there is no sound in the captured video. I have verified this using Windows Media Player on the clip as well as in Video Studio 5. The sound _is_ coming out of the speakers, and the video part is OK. There _is_ a stereo sound track in the .wmv file that is created, but it is silent.
I get the same result trying to capture Windows Media Player playing a video clip that has sound. It captures the window and the video successfully, but there is no sound. On the other hand, I am able to capture the sound using other programs, such as Freecorder. Thus there is likely nothing wrong with my setup or drivers (and it can be done).
This is on Windows 7, 64-bit. I do not get any message saying System Audio is not available, as I have seen in other posts.
I am an experienced user of X4 who needs to upgrade due to needing screen capture features. X5 download trial Install went fine, X5 works well on everything so far except the feature I need. I have disabled UAC, Run all programs as an admin. My system, while old, is capable enough. I use Win 7 64.
When using screen capture it will not capture system audio. I tested the mic and audio while in screen capture "settings" and while the mic works and records, X5 throws a "system audio not found" prompt when clicking on the system audio check. Again, microphone works fine.
Outside of X5, I checked and tested sys audio and it is working. In fact I tried a screen capture with Fraps and it records game audio and voice fine. In fact, while using the screen capture setting I can hear both the mic and voice perfectly.
I make gaming Youtube videos, and recently bought a new computer and needed a new recording software. So I started looking into Video Studio. I am currently using the trial, but will really soon get the full version. So I was gonna record and noticed you can change what audio will be recorded. Cool! So I enabled both of them, but it doesn't work. If I enable System Audio, microphone audio will be disabled, and vice-versa.
Is there any way I can record my game AND my voice without recording the my voice afterwards (I wanna record it live)? I quickly tried to record two video at the same time, each recording having a different audio, but it just recorded one. I don't wanna have to buy $37 Fraps or some other "just-for-recording" software.
In any case, when I try to enable System Audio in the screen capture setup, I get an error message saying that it can't find any system audio.
System audio is working fine on my system, and neither Camtasia, CamStudio nor two other screen capture applications that I use have any problem with this whatsoever.
I'm running VSP X5 Ultimate with SP1 on a Toshiba i7, 8GB RAM and plenty of HD free space. When using the Screen Capture function and, in Settings, switching to system audio, I get a message that no system audio is detected and that I should enable this on my computer. I'm assuming that "system audio" is the feed to the speakers (both of which are working perfectly) and I've been over everything in both Control Panel>Sound and Control Panel>Realtek (not much there) and can find nothing which would "enable system audio". I've never been able to record with the system audio. I searched the VSP forum with multiple iterations of the problem with no luck.
How can I get system audio working in the screen capture?
I have a few questions i just downloaded the demo version
1) how do i set it up to auto detect chapters in corel video studio x5
2) i am trying to burn dvd from a sony ccd - trv43 camcorder what are the best setting to use to burn the dvd .
My camera is connected to the PC via EZCAP.
VideoStudio shows EZCAP in it's video capture list and do capture video via EZCAP.
But in stop motion, VideoStudio dont list EZCAP... so no stop motion. What a disappointment...
Do you think that if VS can capture video from EZCAP, there is a way it can also detect it for stop motion?
Some tech info...
PC - win7 64 bit
CARD - EZCAP (this is an A/V to USB device)
SW - VideoStudio Pro x4
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
Haven't been here in a while and have an old version of Video Studio, good chance i forgot how to use some of the editing techniques. I have a short film to do and am going to try Pro X5 trial software.
Is my computer good enough to handle Pro X5? Here's some numbers.
Processor---Intel(R) Pentium(R) Dual CPU E2220 @ 2.40GHz, 2400 Mhz, 2 Core(s), 2 Logical Processor(s)
Installed Physical Memory (RAM) 4.00 GB
OS Name---Microsoft Windows 7 Home Premium
I have on .avi video file from friend, that I can play OK with sound in VLan player, I just installed X3 and tried to make DVD from it and got it without sound, same thing if I play this loaded .avi in X3, don't have any sound ? Is there any secret encoding I have to look for ? Somebody told me that X3 will eat any format.
I"m running W7 with trial X3?
I am having a problem with way slow audio in Ulead Videostudio 11.5 plus. I know it's an older version, but the format is similar or the same for some of the programs and maybe someone else has had that issue on even a new software version.
I managed to make some music videos with the software, after going to Youtube, as the manual for the software really isn't that great in all honesty. it simply doesn't tell you much detail on doing things. Putting in a music track to the video clips and then turning the sound on each clip all the way down wasn't a problem, but now that I want to do a normal video-I'm finding the sound in the virtual clip or whatever(which I recorded into my digital camera-mov. files), plays like Jabba the Hut off Starwars!
What do I do here to make it sound normal and be able to edit properly and share it in normal sound?I tried splitting the audio and then it sounded normal, BUT it still had that nasty slow sound on the audio. No matter if you mute it or pull the sound down in the video/audio clips in editing. How do I get rid of that slow sound or change it to make it right? Do I even need to split audio there?
So I go to edit some video and now all of a sudden there is no sound/audio playback in any of my clips. The files are fine. They play fine in other software, and in other editing software as well. But this is the my software of preference and I can't use it. WHAT THE HELL HAPPENED. The same thing has also happened to my DVD Workshop 2 software. And the same thing happened to at least 3 previous versions of VideoStudio. Everything works great and then one day BAM, no audio. The data is there because if I go ahead and render it again and play the new file on something else the audio is still there. So the problem is only on Corel/Ulead products. As a matter of fact I just downloaded the VS X3 demo. I cannot find anything about it online anywhere. If I cannot figure this out I am NEVER going to buy another Corel/Ulead product again. And I am a longtime user, way back to version 3 or 4. And for some idiotic reason I keep buying the new versions.
View 1 Replies View RelatedNo Audio when capturing in VSX5. Also After I install the application any ac3 file or movie with ac3 audio will not play the audio.
View 8 Replies View RelatedSlideshow Creation: I'd like to make a slideshow DVD for Xmas to give out. I've made a lot of movies with VS but never a slide show and in fact i've never created a slideshow in any program.
Is this possible in VS10 or would it be better to use DVDLab Pro for this? If VS10 is sufficient to do this (just a fairly basic slideshow NOT HD). I really can't grasp it from the Manual since it really isn't covered in detail there (or did i miss it?) I'm looking to see what types of photos/graphics files and what resolution as well as a HOW TO. I'm clueless about slideshow creation.
Audio DVD Creation:
I do seem to recall that i did this once in VS10 - or was this a dream? Is there any tutorial on this as well?
When using the audio fade in and out to activate the fade should the bars be highlighted or dimmed? I don't seem to hear any difference between them. (Vid pro x4)
View 2 Replies View RelatedI got a new camera that outputs .avi files, and put together a video. When I click an individual clip in the timeline and play it, the audio plays... however, when I play the project, the audio does not play. It also does not play when I render it.
View 6 Replies View RelatedMoved Videostudio X4 from a Win 7 machine to a new Win 8 PC.
Again it seems, audio plays fine when playing a clip from the preview window but not when playing on the timeline. (I had a similar problem with X10 and reported it in an older thread.)
Am searching now for more patches (and yes, I'm aware X6 is now the current version) but nothing obvious at the moment. Have found the SP 1/2/3 downloads on Corel's pages, but as it already upgraded to SP3 just after install, I'm guessing SP 1 and 2 are already covered..
I have VideoStudio X5 Pro. Trying to add voice over using a mike. Problem I am having is the volume. On playback I can barely hear my voice. Have raise the volume level in X5 to the max, still have the issue.
View 1 Replies View RelatedMy PC got a virus and I had to reinstall VideoStudio 11 afterwards.
For the first time since, I've burned a multi-chapter DVD and when I play it there is no audio on Chapters 2-4 but it sounds fine on the menu music and the first chapter. Each chapter is an AVI and plays fine in VS and then in the menu preview.
I've reinstalled the software a couple of times and tried a different DVD+R but still no audio on half of the disc.
Can I record audio from a mic with pro x4
View 4 Replies View RelatedI have been using VS11+ for a few years, and have never run across this problem until now. I am trying to import DVDs recorded on a specific machine and am getting video but no audio. There is audio on the DVDs. I have tried importing both as mpg and as avi (in project properties) but neither works. Although I've been using VS, I am self-taught and not very knowledgeable about codecs, recoding, etc. I mainly use VS for importing video from DVDs, editing, rendering and burning onto DVDs. I am not certain of the make/model of the DVD recorder, but I do know it is new. (I did a keyword search for "import DVD no audio" before posting, but it returned over 2,000 results).
View 6 Replies View RelatedI used to work in MediaStudio Pro which I really like it because it is very user friendly, then suddenly Corel killed them all by buying them, and never continue that wonderful program.How to edit the audio on the timeline? What I mean is, in MediaStudio Pro, from the Audio in Timeline, I can raise the audio up, then few minutes, low it down, then few seconds later, raise up again etc...From what I see right now on X6, for audio I can only either use the Audio filter to low down or to raise up the whole clip but not, raise up or low down at at any part that I want to.
View 3 Replies View RelatedIn my current project, after spliting the audio from a certain clip, the Audio Filter buttom is greyed even the audio clip is marked, so I can't use it. It doesn't happen to me in previous projects.
View 1 Replies View RelatedI downloaded free trial of Video StudioPro When i am capturing video from external device and the video captures OKAY, but there is no Audio when i play back the video????
View 13 Replies View RelatedI add a video to the timeline video track (not the overlay track), and with 'clip' selected and playing... I have audio just fine, for the most part... sometimes the audio jumps and skips, and sounds garbled. With 'project' selected and the video playing, either the same thing happens as the 'clip' or there is no audio at all.
What I have discovered, is that this is common with AVI files. Other files, such as WMV, don't seem to have this problem. It affects only AVI files. The video plays just fine in WMP and VLC, as well as other video editors such as PowerDirector... so why dos VideoStudio have this odd sound issue? And I'm sure as Hell not gonna convert all my videos to WMV just to edit them.
This is on a fresh install of VideoStudio Pro X4 (as well as Windows), no updates, no Service Packs, no nothing... even WITH SP1 it's still does it. I've also removed and reinstalled my codec packs (from K-Lite to Shark007) with no difference.
I've also hear that people are now having this issue with VS Pro X3 as well (I have X3 to) so I assume it's pointless to install X3 as well. I really do NOT like using any editing software other than X4, since it's the best one I've used... so I do not want a reason to use something else.
I've recently upgraded the PC and re-installed VS10 onto the new, improved, beast in front of me now, but have hit a hurdle.
Whether I'm looking at an imported project or starting a new one from scratch, I seem not to be able to get the audio tracks to play when playing the project as a whole.
I can select the music track and play it from within the timeline without a problem, but select the project and all I get is the sound of silence.
after scanning and searching the forum I can't find anything that fits my bill so far.
Drivers have been checked and updated where found wanting. I'm at a loss to explain why. I never had this problem back on the old slow-coach...!
For info I'm running Vista on a dual core 2600Ghz machine with Asus P5K Pro 'board (on-board audio) and a GeForce 8600 GTS graphics card.
When I create a DVD from the project, the 'normalize audio' option in grayed out and cannot be selected. If I choose AVCHD, Blue-Ray, or BD-J the option is available. I only have the problem with this one project, all the other work ok I installed Video Studio on a new computer and copied the project to the new computer, and had the same problem so it must the tied to the project. I opened a log with Corel tech support but with no results. Version is X5 Ultimate, build 15.1.0.34.
View 14 Replies View RelatedI've uploaded MPEGs from Panasonic DMC-TZ7 on HD quality. Audio works fine when playing clips and when played on Quicktime. When playing back on Project, I get a chopped pulsing noise on some parts (although they play OK as clips). I used simple fade to black transitions and trimmed clips. When I finish project, the sound was OK on the first clip but I get no sound or the odd pulse of sound on subsequent clips.
I have re-installed VS pro X3 and downloaded the latest patches but it makes no difference.
I just recently purchased Video Studio Pro X4 and found it to work well in most respects except when I have no audio when working with AVI files. I have wanted to burn to DVD but can not hear any audio. I have tried installing the KLite codec package as well as any other codecs I could find that might be relevant onto my Windows Vista Ultimate 64 bit system.
View 6 Replies View Related