VideoStudio :: System Audio Not Found - Mic Works - X5 Pro Trial
Jul 16, 2012
I am an experienced user of X4 who needs to upgrade due to needing screen capture features. X5 download trial Install went fine, X5 works well on everything so far except the feature I need. I have disabled UAC, Run all programs as an admin. My system, while old, is capable enough. I use Win 7 64.
When using screen capture it will not capture system audio. I tested the mic and audio while in screen capture "settings" and while the mic works and records, X5 throws a "system audio not found" prompt when clicking on the system audio check. Again, microphone works fine.
Outside of X5, I checked and tested sys audio and it is working. In fact I tried a screen capture with Fraps and it records game audio and voice fine. In fact, while using the screen capture setting I can hear both the mic and voice perfectly.
View 3 Replies
ADVERTISEMENT
Oct 13, 2012
I'm running VSP X5 Ultimate with SP1 on a Toshiba i7, 8GB RAM and plenty of HD free space. When using the Screen Capture function and, in Settings, switching to system audio, I get a message that no system audio is detected and that I should enable this on my computer. I'm assuming that "system audio" is the feed to the speakers (both of which are working perfectly) and I've been over everything in both Control Panel>Sound and Control Panel>Realtek (not much there) and can find nothing which would "enable system audio". I've never been able to record with the system audio. I searched the VSP forum with multiple iterations of the problem with no luck.
How can I get system audio working in the screen capture?
View 6 Replies
View Related
Feb 7, 2013
I tried to test the recording feature.......i made a few tests but finally i saw that when i wanted to have voice in my recording.....wasn' possible and a message appears (no audio system detect.........) I am wondering why appeared this message and how i can recording audio also in my video?
View 4 Replies
View Related
Jun 5, 2011
When a separate-system sound is used, how can it audio be synchronized with audio that is recorded on-camera? Is there a tutorial, procedure or technique to easily synchronize audio tracks from audio recorder into a video that already has audio?
View 1 Replies
View Related
Mar 11, 2013
In Video Studio 5 Ultimate, I am trying to use Screen Capture on an application that plays music and has a window with an animation showing the chord progression as it plays. When I try to capture it using Voice as the Audio Settings, it works but the sound is low quality. I assume the reason is that it is recording the microphone listening to the speakers. If I use System Audio as the Audio Settings, then there is no sound in the captured video. I have verified this using Windows Media Player on the clip as well as in Video Studio 5. The sound _is_ coming out of the speakers, and the video part is OK. There _is_ a stereo sound track in the .wmv file that is created, but it is silent.
I get the same result trying to capture Windows Media Player playing a video clip that has sound. It captures the window and the video successfully, but there is no sound. On the other hand, I am able to capture the sound using other programs, such as Freecorder. Thus there is likely nothing wrong with my setup or drivers (and it can be done).
This is on Windows 7, 64-bit. I do not get any message saying System Audio is not available, as I have seen in other posts.
View 4 Replies
View Related
Dec 8, 2013
I make gaming Youtube videos, and recently bought a new computer and needed a new recording software. So I started looking into Video Studio. I am currently using the trial, but will really soon get the full version. So I was gonna record and noticed you can change what audio will be recorded. Cool! So I enabled both of them, but it doesn't work. If I enable System Audio, microphone audio will be disabled, and vice-versa.
Is there any way I can record my game AND my voice without recording the my voice afterwards (I wanna record it live)? I quickly tried to record two video at the same time, each recording having a different audio, but it just recorded one. I don't wanna have to buy $37 Fraps or some other "just-for-recording" software.
View 2 Replies
View Related
Mar 13, 2012
In any case, when I try to enable System Audio in the screen capture setup, I get an error message saying that it can't find any system audio.
System audio is working fine on my system, and neither Camtasia, CamStudio nor two other screen capture applications that I use have any problem with this whatsoever.
View 14 Replies
View Related
Feb 20, 2013
I work in the editorial office of a medical journal and receive AI files from authors. I often get the following message: 'Font not found on the system; missing font has been substituted' when I open a file. This is a particular problem for symbol font as, e.g., a beta would be substituted by a b. I thought that fonts or subsets of fonts were automatically embedded when the file is saved (this is what seems to happen in CS5 and CS6 when you save in ai format).
View 2 Replies
View Related
Apr 3, 2014
I'm having issues with the audio on a video after it has been uploaded to a couple video sharing sites. The issue is the audio works on some computers and not on others. It's also not working on smart devices? It works fne on my computer but some people are only hearing the background music and not the audio from the speaker.
View 11 Replies
View Related
Jul 10, 2011
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
View 6 Replies
View Related
Apr 28, 2013
I am trying to understand how volume editing works. When I edit the volume, if I the volume slider control in attributes, it move the blue volume line up and down. If I edit in the timeline, if moves the brown line up and down. What is the difference in the blue and brown lines? When I play my projects, sometimes the blue lines seems to be setting the audio level and sometimes the brown line seems to be setting it.
View 7 Replies
View Related
Oct 5, 2010
I just checked my flash animation swf files and they are all showing as unlinked. When I try to relink it doesn't work. The swf files don't show up as an option in VS although I can find them during a search of the computer program files. I also keep getting this message to insert the smart sound cd what ever that is. While trying to relink I have now deleted two of them. How can I get them working and recover the two I lost?
View 1 Replies
View Related
Mar 26, 2012
Any good analog capture device that works well in X4 or X5 I get all the usual problems, Fail to build capture graph, No Audio device shown in the list and so on. I have had every version of Video Studio since version 10 and it’s the only one that will work with these capture devices I am using 3 devices, K World USB 2800, Roxio video capture device USB, and Pinnacle 710 USB They all work great in Video Studio 10 and won’t work in any version higher than that I was hoping X5 might be the ticket but no luck. So I have a version of 10 just for analog capture All X Versions work fine with my HD cameras via firewire or mini DV from other camcorders But will not work at all with USB capture devices ?
View 2 Replies
View Related
Aug 12, 2013
I have recently been experiencing the following problem. On completion of editing a video I have created a video file; created a new project with the video file and then proceeded to create DVD. I usually want to create more than 1 and specify, say 4. The first DVD is created correctly and plays fine on my DVD player. I then go back into Video studio (which I have left open at the relevant place) and insert the disk for the second copy. The process runs for some time and then comes up with the message "File or folder not found". I then close the program and, although I have asked it to do so, it has not saved the disc image file.
I have got around this problem by using Movie Factory to create a disc image file, from which I then create the additional copies that I need. However, this is less than ideal!
View 5 Replies
View Related
Mar 4, 2012
I've mastered a few videos, stringing mv4 (mp4) clips together. Handbrake barfs on inputting the video indicating "No Title(s) Found". Also, VLC doesn't report a time length or remaining. I'm trying a number of encoding outputs (HDV, mp4), but was wondering if there's something amiss with the way I constructed my video.
View 4 Replies
View Related
Feb 27, 2012
I tried the trial version of VideoStudio Pro X4 without any issue. So I decided to buy it and install the official version from CD. And now, with this version I get the following error message while trying to create a fideo file No combination of intermediate filters could be found to make the connection [17128:1:4]
I checked internet and saw how to troubleshoot the issue. I removed everything and added functionality to the project. It does not matter at all. I always get the error message. Even if I add one video from a cam without changing or adding anything to it. So no filters are used, no nothing.
Settings:
I use "same as project settings"
NTSC non-drop frame [30 fps]
Microsoft AVI files
24 bits, 320x240, 30 fps
Upper Field First
Uncompressed
PCM, 48.000kHz 16 Bit, Stereo
View 2 Replies
View Related
Sep 25, 2011
Recently I purchased, got the path to download, and my serial number of VS Pro X4-ultimate.
Before that I had been experiencing with a trial VS Pro X4, and got enthused to upgrade to Ultimate
The download was OK, but during my attempts to install, I got the following message in a pop-up window with the title:
Corel Video Studio Pro X4 Ultimate
------
El sistema no puede hallar el archivo especificado
C:DOCUME~1ADMINI~1CONFIG~1TempCorel VideoStudio ProX4 Ultimate14.0.0.001LangCustomInit.htm
------
Translated: The system cannot find the specified file
After this message I cannot go further
-------------------
NEW: Instead of the error mentioned above, sometimes I receive the following error message: La ruta de archivo de idioma no se pudo encontrar, el programa de instalación no puede continuar Translattion: The path to the language file cannot be found, installation program cannot continue
Just for testing purposes, I tried to install the program on an older notebook with XP Pro service pack 2, and there No Problem, everything went OK, the program installed.
This was to test, I will only use (and hope to do so) the program on my main PC, and delete it from the notebook.
Additional question: Can it be that my windows XP pro, SP 3 installation is corrupt or partially failing for installing this program?
I am using Windows XP Pro - with ServicePack 3, Spanish.
View 5 Replies
View Related
Mar 27, 2011
I have added a video file to my timeline and then chosen share dvd. I then added chapters and chose a menu (tried several) and then selected Burn to folder and normalize audio but just NOTHING happens after 3% (which appears immediately) have tried different videos and menus - none get processed. The CPU runs at 100% BTW I am processing thi on my laptop Win 7 (32 bit) Toshiba with 3 GB RAM and a IGB GPU so do not go by my profile
I have a previous version of VS and that works just fine. yes I uninstalled theat entirely and then decided to try VS 14
View 1 Replies
View Related
May 19, 2006
Video Studio v10 Trial . . Under Share / Create Video, there are WMV output resolution options available that exceed 320x480 (ie 1280x768), however when I choose any of these options, the standard result that I get is 208x160. Additionally, Share Video Online / Best Quality is supposed to output a file at 640 x 480, however I am only getting a 208x160 WMV resolution file. I have simplified my testing by only using a single 2816x2112 image displaying itself for 10 seconds .I am using a Trial version, however I can't find anything on ULead's site to support my theory.
View 14 Replies
View Related
Mar 19, 2011
Trying out VS trial. The desktop display only allows full screen which gives me no access to anything else or minimized. What's up with that? I have a big monitor and certainly don't need all of it for one program.
View 5 Replies
View Related
May 17, 2012
I get this error whenever I try to start the trial of VSx5 (Funny thing is, I am trying it because Pinnacle 15 is far too crashy for me.)
View 4 Replies
View Related
Mar 7, 2012
UI Layout - no custom modes available in trial version. Is that because it's the trial version or do I have an error?
View 2 Replies
View Related
May 30, 2012
I own VS 12, and when I work with HDV footage, I'm able to create an HDV video file either with MPEG optimizer or Same as first video clip. The project smart renders and I get HDV file. I've downloaded VS 15 trial as a test, as it has some additional features I'm interested in. However, with the VS 15 trial, following the same steps produces a file formatted as NTSC DVD 4:3 and no smart render. Am I missing something or is this a bug/limitation of the trial? Corel says the trial is fully functional. I'm running Windows 7 Pro 64 bit i5 4 GB ram. I even tried installing the VS 15 trial on my old XP laptop and had the same issue.
View 2 Replies
View Related
Aug 12, 2012
Haven't been here in a while and have an old version of Video Studio, good chance i forgot how to use some of the editing techniques. I have a short film to do and am going to try Pro X5 trial software.
Is my computer good enough to handle Pro X5? Here's some numbers.
Processor---Intel(R) Pentium(R) Dual CPU E2220 @ 2.40GHz, 2400 Mhz, 2 Core(s), 2 Logical Processor(s)
Installed Physical Memory (RAM) 4.00 GB
OS Name---Microsoft Windows 7 Home Premium
View 2 Replies
View Related
Nov 5, 2011
I have on .avi video file from friend, that I can play OK with sound in VLan player, I just installed X3 and tried to make DVD from it and got it without sound, same thing if I play this loaded .avi in X3, don't have any sound ? Is there any secret encoding I have to look for ? Somebody told me that X3 will eat any format.
I"m running W7 with trial X3?
View 3 Replies
View Related
Dec 10, 2010
I am having a problem with way slow audio in Ulead Videostudio 11.5 plus. I know it's an older version, but the format is similar or the same for some of the programs and maybe someone else has had that issue on even a new software version.
I managed to make some music videos with the software, after going to Youtube, as the manual for the software really isn't that great in all honesty. it simply doesn't tell you much detail on doing things. Putting in a music track to the video clips and then turning the sound on each clip all the way down wasn't a problem, but now that I want to do a normal video-I'm finding the sound in the virtual clip or whatever(which I recorded into my digital camera-mov. files), plays like Jabba the Hut off Starwars!
What do I do here to make it sound normal and be able to edit properly and share it in normal sound?I tried splitting the audio and then it sounded normal, BUT it still had that nasty slow sound on the audio. No matter if you mute it or pull the sound down in the video/audio clips in editing. How do I get rid of that slow sound or change it to make it right? Do I even need to split audio there?
View 2 Replies
View Related
Dec 13, 2010
So I go to edit some video and now all of a sudden there is no sound/audio playback in any of my clips. The files are fine. They play fine in other software, and in other editing software as well. But this is the my software of preference and I can't use it. WHAT THE HELL HAPPENED. The same thing has also happened to my DVD Workshop 2 software. And the same thing happened to at least 3 previous versions of VideoStudio. Everything works great and then one day BAM, no audio. The data is there because if I go ahead and render it again and play the new file on something else the audio is still there. So the problem is only on Corel/Ulead products. As a matter of fact I just downloaded the VS X3 demo. I cannot find anything about it online anywhere. If I cannot figure this out I am NEVER going to buy another Corel/Ulead product again. And I am a longtime user, way back to version 3 or 4. And for some idiotic reason I keep buying the new versions.
View 1 Replies
View Related
Jun 3, 2012
No Audio when capturing in VSX5. Also After I install the application any ac3 file or movie with ac3 audio will not play the audio.
View 8 Replies
View Related
Dec 16, 2010
Slideshow Creation: I'd like to make a slideshow DVD for Xmas to give out. I've made a lot of movies with VS but never a slide show and in fact i've never created a slideshow in any program.
Is this possible in VS10 or would it be better to use DVDLab Pro for this? If VS10 is sufficient to do this (just a fairly basic slideshow NOT HD). I really can't grasp it from the Manual since it really isn't covered in detail there (or did i miss it?) I'm looking to see what types of photos/graphics files and what resolution as well as a HOW TO. I'm clueless about slideshow creation.
Audio DVD Creation:
I do seem to recall that i did this once in VS10 - or was this a dream? Is there any tutorial on this as well?
View 4 Replies
View Related
Jun 8, 2011
When using the audio fade in and out to activate the fade should the bars be highlighted or dimmed? I don't seem to hear any difference between them. (Vid pro x4)
View 2 Replies
View Related
Jul 17, 2012
I got a new camera that outputs .avi files, and put together a video. When I click an individual clip in the timeline and play it, the audio plays... however, when I play the project, the audio does not play. It also does not play when I render it.
View 6 Replies
View Related
