VideoStudio :: File Or Folder Not Found?
Aug 12, 2013
I have recently been experiencing the following problem. On completion of editing a video I have created a video file; created a new project with the video file and then proceeded to create DVD. I usually want to create more than 1 and specify, say 4. The first DVD is created correctly and plays fine on my DVD player. I then go back into Video studio (which I have left open at the relevant place) and insert the disk for the second copy. The process runs for some time and then comes up with the message "File or folder not found". I then close the program and, although I have asked it to do so, it has not saved the disc image file.
I have got around this problem by using Movie Factory to create a disc image file, from which I then create the additional copies that I need. However, this is less than ideal!
View 5 Replies
ADVERTISEMENT
Jul 1, 2011
I have been happily x-reffing for years but recently my x-refs will randomly disappear when I reload them. I have checked the file name seems to be the same the paths match where the file is (on a network drive if that matters.) I defenitely haven't deleted the x-ref on the model space.
View 4 Replies
View Related
Sep 25, 2011
Recently I purchased, got the path to download, and my serial number of VS Pro X4-ultimate.
Before that I had been experiencing with a trial VS Pro X4, and got enthused to upgrade to Ultimate
The download was OK, but during my attempts to install, I got the following message in a pop-up window with the title:
Corel Video Studio Pro X4 Ultimate
------
El sistema no puede hallar el archivo especificado
C:DOCUME~1ADMINI~1CONFIG~1TempCorel VideoStudio ProX4 Ultimate14.0.0.001LangCustomInit.htm
------
Translated: The system cannot find the specified file
After this message I cannot go further
-------------------
NEW: Instead of the error mentioned above, sometimes I receive the following error message: La ruta de archivo de idioma no se pudo encontrar, el programa de instalación no puede continuar Translattion: The path to the language file cannot be found, installation program cannot continue
Just for testing purposes, I tried to install the program on an older notebook with XP Pro service pack 2, and there No Problem, everything went OK, the program installed.
This was to test, I will only use (and hope to do so) the program on my main PC, and delete it from the notebook.
Additional question: Can it be that my windows XP pro, SP 3 installation is corrupt or partially failing for installing this program?
I am using Windows XP Pro - with ServicePack 3, Spanish.
View 5 Replies
View Related
Jan 25, 2014
When I try to open photos that I've previously imported, Lightroom is saying "Folder Can't be found" and when I try to re-import so that it can locate the source, it won't re-import because it thinks the photos are still in the catalog.
View 2 Replies
View Related
Nov 15, 2013
Lately I have been having a file created when I close either Video Studi X4 or X5.They are DUMP files which are kept in a folder.I have this files ready to send, because it tells me that I have to send them to the Corel support centre, but I don't know whereI have to send them.I'm also having lots of problems keeping running either of the programmes(X4 or X%). They tend to stop, hang-up, and the screen goes cloudy telling that the application is not running well and I have to force finishing the programme.
View 8 Replies
View Related
Jun 12, 2013
I keep getting a message "New files found in your watched folder". But it shows me old files. If I say I want to download them, it tells me it cannot.
PE 11 Windows 7
View 5 Replies
View Related
Dec 10, 2011
I have been working with LR 2.7 for a while now and was happy with it.
PC - Win XP - LR3.5
Photo's stored on external hard disk (K:)
The RAW captures of a Nikon 3100 I recently won were not being recognized/imported by LR 2.7 and I installed the 3.5 version to see if it was any better. I would have to buy it anyway by the time I switch to Win7. In 3.5 the Raw files were imported, the settings of 2.7 were nicely taken over but now and I cannot export the files I have worked on to the K: drive of the external hard drive as I used to do with 2.7.
I get the message 'The folder could not be found' though it is set in the Export Window and I am looking at it in Win Explorer.
The original RAW captures are on the D: drive but that was always the case with 2.7 as well... I am doing it exactly as I used to with 2.7.
I tried with a photo from an older folder of my usual camera and everything works fine there.The problem seems to be only with the Nikon files. Now I start wondering if there is something with raw format of this Nikon camera that is putting LR in a twist...
View 3 Replies
View Related
Jan 8, 2014
I have been forced to check under the hood in LR due to the fact that I have lost a big chuck of my keywords, and I'm contemplanting if its worth importing a copy of my backup copy. I am debating if I should just go back and re-enter all the missing keywords, or retrieving a backup copy. However, I read somewhere that its wise to change the name of the master catalog before retrieving a backup copy.
However, I found multiple folders of my catalog in my master folder. I'd like to know which one should I delete without causing any major collateral damage.
1- folder 176-2.lrcat created 3-26-11 2:51 PM 289 MB
2- folder 176-2-2.lrcat created 2-12-13 10:32 PM 363 MB
3- folder 176-2-3.lrcat created 2-24-13 5:24 PM 287 MB
4- folder 176-2 copy.lrca created 3-26-11 2:31 PM 179 MB
In addition, there are corresponding Previews.lrdata for each folder.
View 1 Replies
View Related
Jul 26, 2013
Few days ago when I installed PS CC and worked with it that error did not appear. Why now? What does it means? The only updates installed on my computer since installing PS were those related to Adobe applications: PS, Illustrator, InDesign.I am on MAC with OS X 10.8.4. The same license and installation is on my second computer. That error do not appear.
View 1 Replies
View Related
Oct 5, 2010
I just checked my flash animation swf files and they are all showing as unlinked. When I try to relink it doesn't work. The swf files don't show up as an option in VS although I can find them during a search of the computer program files. I also keep getting this message to insert the smart sound cd what ever that is. While trying to relink I have now deleted two of them. How can I get them working and recover the two I lost?
View 1 Replies
View Related
Mar 17, 2013
My main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files.
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6
View 7 Replies
View Related
Mar 4, 2012
I've mastered a few videos, stringing mv4 (mp4) clips together. Handbrake barfs on inputting the video indicating "No Title(s) Found". Also, VLC doesn't report a time length or remaining. I'm trying a number of encoding outputs (HDV, mp4), but was wondering if there's something amiss with the way I constructed my video.
View 4 Replies
View Related
Feb 27, 2012
I tried the trial version of VideoStudio Pro X4 without any issue. So I decided to buy it and install the official version from CD. And now, with this version I get the following error message while trying to create a fideo file No combination of intermediate filters could be found to make the connection [17128:1:4]
I checked internet and saw how to troubleshoot the issue. I removed everything and added functionality to the project. It does not matter at all. I always get the error message. Even if I add one video from a cam without changing or adding anything to it. So no filters are used, no nothing.
Settings:
I use "same as project settings"
NTSC non-drop frame [30 fps]
Microsoft AVI files
24 bits, 320x240, 30 fps
Upper Field First
Uncompressed
PCM, 48.000kHz 16 Bit, Stereo
View 2 Replies
View Related
Jul 16, 2012
I am an experienced user of X4 who needs to upgrade due to needing screen capture features. X5 download trial Install went fine, X5 works well on everything so far except the feature I need. I have disabled UAC, Run all programs as an admin. My system, while old, is capable enough. I use Win 7 64.
When using screen capture it will not capture system audio. I tested the mic and audio while in screen capture "settings" and while the mic works and records, X5 throws a "system audio not found" prompt when clicking on the system audio check. Again, microphone works fine.
Outside of X5, I checked and tested sys audio and it is working. In fact I tried a screen capture with Fraps and it records game audio and voice fine. In fact, while using the screen capture setting I can hear both the mic and voice perfectly.
View 3 Replies
View Related
Oct 13, 2012
I'm running VSP X5 Ultimate with SP1 on a Toshiba i7, 8GB RAM and plenty of HD free space. When using the Screen Capture function and, in Settings, switching to system audio, I get a message that no system audio is detected and that I should enable this on my computer. I'm assuming that "system audio" is the feed to the speakers (both of which are working perfectly) and I've been over everything in both Control Panel>Sound and Control Panel>Realtek (not much there) and can find nothing which would "enable system audio". I've never been able to record with the system audio. I searched the VSP forum with multiple iterations of the problem with no luck.
How can I get system audio working in the screen capture?
View 6 Replies
View Related
Nov 2, 2012
When i try saving something it comes up with could not save as (file name) because the file could not be found and need to save this file.
im using photoshop cs5.1.
View 1 Replies
View Related
Mar 9, 2014
When I click to edit a photo that I've re- imported, it says "photo missing" and "file can not be found". How can I re- access this photo and continue to edit?
View 1 Replies
View Related
Sep 6, 2013
Upgraded to Window 7 64 bit and autocad 2014 and now I can't make pdf's from my dwgs.The dwg to pdf pc3 file is in the same directory as the other plot files and my search path points to that directory.When I try to conver to pdf, I'm asked to select the file from the list (see attached)
View 9 Replies
View Related
Feb 12, 2014
I downloaded an ACS point file for LiDAR data. I was able to successfully connect it to Autocad Map 3D, and generate a surface.This is the ACS file: URL....
However when I tried to import it in Revit via Massing&Site->Topo-> Import Point File, after converting it to CSV in Microsoft Excel I get the message "No points were found in the file."
Also, the ASC file fails to import in Autodesk Recap.This is the converted CVS file: URL....I suspect that the problem might be in the ASC to CVS conversion. Any settings on doing the conversion differently?
View 1 Replies
View Related
Dec 29, 2013
After the fee upgrade from OSX Lion to Mavericks my Lr cannot find the previously imported and processed RAW file when the Export function is requested.
View 20 Replies
View Related
Feb 20, 2013
cs6. I downloaded the master collection and when i go to open Photoshop i receive the error,, "Photoshop.exe. - Entry Point not Found" "The procedure entry point GetLogicalProcessorInformation could not be located in dynamix link library KERNEL32.dll." My operating system is Windows XP, english
View 7 Replies
View Related
Feb 7, 2012
I'm getting this error "Run-time" error '48' "File not found: *****.arx" calling functions from VBA (Autocad 2011 64b).
note that same code (VBA & ARX) works fine on 32b env.
View 2 Replies
View Related
Sep 9, 2012
When I try to save for web, Photoshop pops up a dialog box that says "could not complete the export command because the file could not be found".
View 2 Replies
View Related
Oct 26, 2011
When I try to open up corel x3, i geta message "valid workspace file not found at path specified" and the program will not open.
View 1 Replies
View Related
Sep 11, 2012
I was using CorelDRAW X6 when we had a momentary power outtage. When I rebooted and attempted to reopen Corel I received the following message,
"Valid workplace file not found at path specified."
I uninstalled and reinstalled Corel and still get the same message. I don't know how to fix this. Must I save all existing files on an external drive and use the "Restore" disc to start all over?
View 3 Replies
View Related
Sep 21, 2012
Autocad 2008. Certain command and mouse control unable function.. which the error dialog box shown when start up launch the autocad...
" Customization file load failed. File not found: COMMANDLINE.cui
View 1 Replies
View Related
Apr 13, 2007
i cant get install it becasue this nagging erorr message
View 5 Replies
View Related
Nov 6, 2012
I need to restore a catalog. All of the info I have found eventually leads to the statement "Restore a catalog to a previously saved version".
Using the hyperlink in this paragraph is a dead end and yeilds a message "The file can't be found". I desperately need my .tly file restored. I do have Norton Ghost image backups but they don't do much good. I think the problem was generated when I removed PSE ver 11.
View 4 Replies
View Related
Sep 23, 2012
I have more photos ending up lost. Most I've done nothing t,o or moved since importing. I've tried the directions outlined in "help" but get the message "file not found" or "folder not found". All missing photos can be seen on my screen but I can't do anything with them. how to recover and have access to them?
View 5 Replies
View Related
Feb 19, 2008
I just reinstalled CorelDraw 12 on my new computer, but I can't open it. I get the following error message: "Valid workspace file not found at the path specified. XML document must have a top level element."
View 11 Replies
View Related
Jun 6, 2012
i made a survey, about 2000 points with my TSC3R6. I exported my CSV file to a PNEZD file with comma seperated. When i try ti import the file (CSV then i made a .txt), C3D tells me "no point file format match found". Then I opened the txt file, searched for any error that would not let me import my points. The only thing i have found would be the description of my points that sometimes had a space between 2 words (ex: bt balast and ht balast) so i changed it to bt-balast and ht-balast. i looked further and didnt found anything else. heres a sample of my txt file:
11251,5038721.804,370118.600,52.877,69
11252,5038722.437,370118.327,52.980,82
11253,5038725.381,370117.058,54.235,81
11254,5038725.967,370117.395,54.325,bt-balast
11255,5038727.637,370116.899,54.860,ht-balast
11256,5038728.983,370116.602,54.857,balast
11257,5038730.043,370116.150,54.839,ht-balast
11258,5038731.524,370115.635,54.345,bt-balast
11259,5038731.763,370115.674,54.308,81
11260,5038733.529,370114.961,53.606,82
11261,5038734.460,370114.525,53.505,350
Now i have to draw something but i cant even find why importing points fails in C3D.
some usefull informations maybe:
windows 7 32bits SP1
autocad civil 3d 2013 (not yet activated, next week)
View 4 Replies
View Related
