When i try saving something it comes up with could not save as (file name) because the file could not be found and need to save this file.
im using photoshop cs5.1.
cs6. I downloaded the master collection and when i go to open Photoshop i receive the error,, "Photoshop.exe. - Entry Point not Found" "The procedure entry point GetLogicalProcessorInformation could not be located in dynamix link library KERNEL32.dll." My operating system is Windows XP, english
View 7 Replies View RelatedWhen I try to save for web, Photoshop pops up a dialog box that says "could not complete the export command because the file could not be found".
View 2 Replies View Relatedi cant get install it becasue this nagging erorr message
View 5 Replies View RelatedI need to restore a catalog. All of the info I have found eventually leads to the statement "Restore a catalog to a previously saved version".
Using the hyperlink in this paragraph is a dead end and yeilds a message "The file can't be found". I desperately need my .tly file restored. I do have Norton Ghost image backups but they don't do much good. I think the problem was generated when I removed PSE ver 11.
Save PSD File of Social Icons to Separate PNG image files for each file
View 7 Replies View RelatedI did a search around, and did not find the answer. Basically I have attempted to create an action in Photoshop CS6 which will save a file in the tiff format after i crop the image. I want the file name to be the name of the image (which is supposed to change depending on name of the image) like this:
1280x720_MGXXX.tiff, where, in my case the XXX represents DIFFERENT NUMBERS.
I want to apply the action to one image at a time. Each image has a different number (name). I record the action, add the 1280x720 text to the image name in the Save dialog. I am saving the image in a different folder from the source file. The source file name is _MGXXXX.tiff (again XXXX is a number like 2220...).
When I run the action on a file, say "_MG2221.tiff" it adds the 1280x720, and saves the file. When I apply the action on the next file (_MG2222.tif), the action overwrites the existing file, 1280x720_MG2221.tif, with the image. The action always uses the name I entered in the Save dialog!! I think I was able to do this in CS4 and CS5.
I want to be able to open a file, crop and adjust it, and then save in a diff location with 1280x720 pretended to the file name.
I am trying to find a way to save my image file as a jpeg and add -web or -print to the existing file name. This way I can easily see which files are lower resolution for web posting or high resolution for printing.
View 8 Replies View RelatedI am saving work as jpeg into desktop file.... sometimes (not always) when I go to retrieve it ...it shows up as a file that I cannot open, not a normal jpeg. I just tried to copy and paste to show here..then draged into this space and it opened...tried to save it to desk top from here but it is still showing up as a very weid icon that will not open...? In the properties it shows as a jepeg, but the icon is totally different..
View 1 Replies View RelatedWhen I click to edit a photo that I've re- imported, it says "photo missing" and "file can not be found". How can I re- access this photo and continue to edit?
View 1 Replies View RelatedI save a lot of files to "save for web". After saving PS asks if I want to save changes to the original file. I never want to save the changes to the original. Since the default is to change the file I am afraid I will accidentally OK the change without wanting to. I would like it to stop asking and just not save it. Is there a way?
View 5 Replies View RelatedI just had a question about the slice tool. Is there anyway I can save slices I make to one .psd file so they can be applied to another .psd file?
For example with these two layouts (2 images):
If I could apply some certain slices to the first one, it would be nice to automatically be able to apply them to the second.
I have recently been experiencing the following problem. On completion of editing a video I have created a video file; created a new project with the video file and then proceeded to create DVD. I usually want to create more than 1 and specify, say 4. The first DVD is created correctly and plays fine on my DVD player. I then go back into Video studio (which I have left open at the relevant place) and insert the disk for the second copy. The process runs for some time and then comes up with the message "File or folder not found". I then close the program and, although I have asked it to do so, it has not saved the disc image file.
I have got around this problem by using Movie Factory to create a disc image file, from which I then create the additional copies that I need. However, this is less than ideal!
Upgraded to Window 7 64 bit and autocad 2014 and now I can't make pdf's from my dwgs.The dwg to pdf pc3 file is in the same directory as the other plot files and my search path points to that directory.When I try to conver to pdf, I'm asked to select the file from the list (see attached)
View 9 Replies View RelatedI downloaded an ACS point file for LiDAR data. I was able to successfully connect it to Autocad Map 3D, and generate a surface.This is the ACS file: URL....
However when I tried to import it in Revit via Massing&Site->Topo-> Import Point File, after converting it to CSV in Microsoft Excel I get the message "No points were found in the file."
Also, the ASC file fails to import in Autodesk Recap.This is the converted CVS file: URL....I suspect that the problem might be in the ASC to CVS conversion. Any settings on doing the conversion differently?
After the fee upgrade from OSX Lion to Mavericks my Lr cannot find the previously imported and processed RAW file when the Export function is requested.
View 20 Replies View RelatedI'm getting this error "Run-time" error '48' "File not found: *****.arx" calling functions from VBA (Autocad 2011 64b).
note that same code (VBA & ARX) works fine on 32b env.
When I try to open up corel x3, i geta message "valid workspace file not found at path specified" and the program will not open.
View 1 Replies View RelatedI was using CorelDRAW X6 when we had a momentary power outtage. When I rebooted and attempted to reopen Corel I received the following message,
"Valid workplace file not found at path specified."
I uninstalled and reinstalled Corel and still get the same message. I don't know how to fix this. Must I save all existing files on an external drive and use the "Restore" disc to start all over?
Recently I purchased, got the path to download, and my serial number of VS Pro X4-ultimate.
Before that I had been experiencing with a trial VS Pro X4, and got enthused to upgrade to Ultimate
The download was OK, but during my attempts to install, I got the following message in a pop-up window with the title:
Corel Video Studio Pro X4 Ultimate
------
El sistema no puede hallar el archivo especificado
C:DOCUME~1ADMINI~1CONFIG~1TempCorel VideoStudio ProX4 Ultimate14.0.0.001LangCustomInit.htm
------
Translated: The system cannot find the specified file
After this message I cannot go further
-------------------
NEW: Instead of the error mentioned above, sometimes I receive the following error message: La ruta de archivo de idioma no se pudo encontrar, el programa de instalación no puede continuar Translattion: The path to the language file cannot be found, installation program cannot continue
Just for testing purposes, I tried to install the program on an older notebook with XP Pro service pack 2, and there No Problem, everything went OK, the program installed.
This was to test, I will only use (and hope to do so) the program on my main PC, and delete it from the notebook.
Additional question: Can it be that my windows XP pro, SP 3 installation is corrupt or partially failing for installing this program?
I am using Windows XP Pro - with ServicePack 3, Spanish.
Autocad 2008. Certain command and mouse control unable function.. which the error dialog box shown when start up launch the autocad...
" Customization file load failed. File not found: COMMANDLINE.cui
I have been happily x-reffing for years but recently my x-refs will randomly disappear when I reload them. I have checked the file name seems to be the same the paths match where the file is (on a network drive if that matters.) I defenitely haven't deleted the x-ref on the model space.
View 4 Replies View RelatedI have more photos ending up lost. Most I've done nothing t,o or moved since importing. I've tried the directions outlined in "help" but get the message "file not found" or "folder not found". All missing photos can be seen on my screen but I can't do anything with them. how to recover and have access to them?
View 5 Replies View Relatedam having an Issue with CS6 when saving files. When saving a file using the 'Save' option (not 'Save As') the file is not staying at the size of the artboard as it should, it is however being aurtomatically cropped down to the actual artwork size. This is causing issues with the Process we work with as we need the file to stay at the artboard size.If I click 'Save As' and change the Adobe PDF Preset to 'Press Quality' then this works, however this means that every file we save(which is quite alot in a day) means we have to go through the 'Save As' option and manually change each save.why this has suddenly started to happen with our Illustrators and do you know how to fix this so that it stays at the Artboard size when 'Save' is used?
View 17 Replies View RelatedI found this error a bit strange, my colleague it trying to save a file and this error keeps on coming out (see attachments). When we try to save it, it only saves as a temp file. When we try to open up the temp file and try to save it, it still doesn't allow us to do. Also, when we cancel the save, the original file will be gone and he will lost all of his data. Below are the specs of the computer and version of the AutoCAD.
Computer: DELL Precision T5500
OS: Windows 7 Ult
AutoCAD Version: 2011
Also, we're using ProSteel Series 3 as well. We tried saving the file using ProSteel and just AutoCAD but it didn't do the trick. I've tried some options (listed below) that might get it to work but still no luck.
1. Restart the computer.
2. Repair / Reinstall AutoCAD.
3. Give permission to the folder (read from the forum).
I'm using the file dialog snippet as the foundation for a save as dialog box for saving a new copy of my template assembly to a project folder. Is there a way to disable the ability to click on a file in the window which puts that filename in the input box? The assembly file name is standardized and pre-"calculated" by my code and its a decent hassle if you accidentally click another file because the user would either have to rewrite the file name by hand, or cancel out of the dialog box and re-navigate to the project folder.
Inventor 2013 SP 1.1
if i need to rename or change anything in the iproperties of ipt, im doing it from the vault.my problem is that, when i change something in iproperties of an ipt thru vault, i have to open the idw to update it.
as most of the iproperties in ipt shows in the idw.
its easy to change the properties in vault. but its deleting its purpose if i have to each idw to make sure i have the updated idw.is there a code where i can open all idw and save the same file and checking to the vault automatically?
Civil 3D 2013.One of the problems my team has is that we have a number of remote offices that all work on the same drawings. To ensure integrity of the drawings, we use a Wide Area file replication and locking service to ensure the files do not become out of sync and corrupted between offices.
AutoDesk seems to open and save files and their subordinate xrefs serially in a single thread instead of in a multi-threaded manner. Because of this there is a Huge time impact on just opening and saving files at remote sites as a result of Civil 3D having to wait for the home office file lock check on each and every file before opening the next file.
We have 100Mbit down / 20Mbit up transmission links at both sites dedicated to the file replication, with Gbit backbone in both offices.
note that the remote site has a full copy of all files in its replicated share. These local files are what Civil 3D is opening. No Files are being transferred during file open unless a remote change has just occurred (proven through replication logs).
When the drawing file is opened for editing, a file lock check is performed and Windows waits for the response to ensure it can be opened for editing before telling Civil 3D. When Civil 3D has this file open, it has a list of all the xrefs for this file. Civil 3D then seems to open each file in sequence.
This is a problem when a large latency is introduced through our 3rd party Wide area file system by a remote site file lock check.
This is not AutoDesk's fault but the compounding of the two system's operational behaviours, causing a Very long wait on file open, Save, PaperSpace operations (30 minutes for large drawings).
I would like to see a multithreaded (threadpool) file open occur against the entire list of xrefs (during save as well). Then recursively executed for all subordinate xrefs of those files until the operation is complete.
As long as a file list is maintained during the operation and updated as each file operation completes (which obviously it is) in the primary thread, this should not cause any problem. All dependancies can be opened in sequence once the initial file operations are complete and when a particular file in the list is required but not open yet, it's priority can be raised in the threadpool.
I'm trying to edit some map files in the game called "Farming Simulator 2013" by GIANTS. They are png files & I can load/edit the files in paint. But after I save the files back to the proper game folder & try to run the game I get an error stating :grass_weight.png' incorrect format. Must be 8bit single channel. Is there a plug-in to save a file in this format? Am I missing something or am I just not going to be able to edit a paint,net file in paint.net? I
View 6 Replies View RelatedI have worked in Sony Vegas 9 and I was hoping Adobe Premier Pro CC was similar--- but its not. I can't figure out how to render and save a file as a windows media or mp3 or in any format for that matter.
View 4 Replies View RelatedI just reinstalled CorelDraw 12 on my new computer, but I can't open it. I get the following error message: "Valid workspace file not found at the path specified. XML document must have a top level element."
View 11 Replies View Related