I save a lot of files to "save for web". After saving PS asks if I want to save changes to the original file. I never want to save the changes to the original. Since the default is to change the file I am afraid I will accidentally OK the change without wanting to. I would like it to stop asking and just not save it. Is there a way?
View 5 RepliesWhen I am working with various pictures in PS, I have like 10 open and every time I go out of photoshop and come back, they have all closed down to the docking window. I have to re-open them again from there, I want to STOP THEM from closing when I go to desktop or somewhere else. I want them to stay afloat. I know I can click Ctrl + mouse and "restore all windows" but that is also a nuisance because it resized my PS window and I have to push up teh layers palette again.
View 18 Replies View Relatedwhen I have a file opened in PSCS4, I do not see the option to close only the file, not PS. I do not see the window for the file.
View 3 Replies View RelatedI've just bought CS6 (yesterday); everything works fine until I click to open liquify, when I get a message saying that CS6 'is not responding', and it immediately closes down.
View 2 Replies View RelatedI have Adobe CS4 for macs. Just today, every time I enclose an area with my polygonal lasso tool, it stopped closing the area and instead gives me the message "No pixels are more than 50% selected.
The selected edges will not be visible." I must have accidentally pressed something by mistake that makes the lasso tool not work anymore but I don't know what. Do I need to reset Photoshop? Any ways to reset it? I tried holding option,command shift but it still did not reset my Photoshop to its original settings.I also rebooted my computer several times with no success.
Save PSD File of Social Icons to Separate PNG image files for each file
View 7 Replies View RelatedI did a search around, and did not find the answer. Basically I have attempted to create an action in Photoshop CS6 which will save a file in the tiff format after i crop the image. I want the file name to be the name of the image (which is supposed to change depending on name of the image) like this:
1280x720_MGXXX.tiff, where, in my case the XXX represents DIFFERENT NUMBERS.
I want to apply the action to one image at a time. Each image has a different number (name). I record the action, add the 1280x720 text to the image name in the Save dialog. I am saving the image in a different folder from the source file. The source file name is _MGXXXX.tiff (again XXXX is a number like 2220...).
When I run the action on a file, say "_MG2221.tiff" it adds the 1280x720, and saves the file. When I apply the action on the next file (_MG2222.tif), the action overwrites the existing file, 1280x720_MG2221.tif, with the image. The action always uses the name I entered in the Save dialog!! I think I was able to do this in CS4 and CS5.
I want to be able to open a file, crop and adjust it, and then save in a diff location with 1280x720 pretended to the file name.
I am trying to find a way to save my image file as a jpeg and add -web or -print to the existing file name. This way I can easily see which files are lower resolution for web posting or high resolution for printing.
View 8 Replies View RelatedI am saving work as jpeg into desktop file.... sometimes (not always) when I go to retrieve it ...it shows up as a file that I cannot open, not a normal jpeg. I just tried to copy and paste to show here..then draged into this space and it opened...tried to save it to desk top from here but it is still showing up as a very weid icon that will not open...? In the properties it shows as a jepeg, but the icon is totally different..
View 1 Replies View RelatedMy Photoshop Elements 10 keeps shutting down on me whenever I open a large file or I create a new file and try to add a new frame layer. It was working fine a week ago and now nothing.
View 1 Replies View RelatedI just had a question about the slice tool. Is there anyway I can save slices I make to one .psd file so they can be applied to another .psd file?
For example with these two layouts (2 images):
If I could apply some certain slices to the first one, it would be nice to automatically be able to apply them to the second.
I get it on closing the Video Studio Pro 14.1.0.107.(S.Pac 2) I initialy got it when trying Corel's trial download so went and bought the Package, retail, thinking (foolishly) that that would solve the problem. I have spent hours on line with Corel Tech who said it was a conflict with jscript.dll in Explorer 9. I reverted back to Explorer 8 but no luck. It makes no difference whether V.S has files active or not so it is not a function of source files.
As youcan see on my profile - Windows 7, Home premium; 3.2 Gig Intel Core2 Duo; 3518 MB RAM; 500 Gig HD; 1024 MB NVidia GT 440 Video card.
I frequently have AutoCAD LT crash on me when I close a file. It seems to happen most after I have plotted the drawing.
View 9 Replies View RelatedSeveral times when closing an IDW the image of the file reamains on the screen. The Tab for the file in the lower left hand corner dissapears but the image stil remains on the screen. You have to navigate to another open invnetor file in order for this image to dissapear. If you are not paying close attention you can inadvertantly close several files by repeatedly trying to close the "image" that is still on the screen. I am only seeing this on one of our workstations. Coulod this be a video card error or a setting?
View 8 Replies View RelatedI started using GIMP on a PC a couple of months ago after developing skills in PS over the years on my Macs at home and at work.
I like GIMP and it's stable nature along with everything else... in addition to allot of standard photo editing and graphics creation, I recently used it for some of the animation filters, which are nice.
The only problem I'm having is that when I create a path, or multiple paths, and have them in the paths palette, after I save and close the file that contains the paths, the next time I open that file my paths are gone... completely disappeared.
AutoCAD 2013, 60-90 days into it, upgraded from 2007.
I have 2 of 4 workstations with this issue, AutoCAD will automtically save the file when the files is closed, w/o any prompts to verify of we want to saved or not.
I have my Options|Autosave turned off, but this should not affect the save on close it should only create a continual ac$ backup file.
This is now the 2nd time this has occured. In early March we noticed this and in dealing with AutoCAD (Suscription Service) we finally deceided to restore AutoCAD to factory defaults, which did fix the issue at the time. However it also meant that I needed to retore all the pathways and our standards. Once completed, I paid particular attention to ensuring that AutoCAD was NOT saving the file on close and it was doing so up until earlier this week, when I noticed it SAVING on close again.
Now most of you might think, hey thats a good thing, however, we routinely will test modifications to our layouts on our working files, but dont want to actually modify those files and then we would simply close the drawing w/o saving thus ensuring that those mods were not saved.
In March, both 2007 & 2013 did this, however only my 2013 is affected now.
Trying to create a bit of code that when the 'OnNew Document' event is fired the code checks for a particular Custom Property. Depending on what the Custom Property is set to a form is then fired with relevant text to point the user to a specific area in the workspace. Al this works ok.
But if they press cancel i need the code close the activate 'Part1' which inturn then allows the user to select 'New' to begin again.
I have tried various scenarios but the main problem is that Inventor then crashes!
PublicSub applicationEvents_OnNewDocument(DocumentObject As Inventor._Document, BeforeOrAfter As Inventor.EventTimingEnum, Context As Inventor.NameValueMap, ByRef HandlingCode As Inventor.HandlingCodeEnum) Handles applicationEvents.OnNewDocument
[Code]....
I’m going through a bunch of old files to see what I can git rid of.
After I view and then close a file in Illustrator CS6 I can delete the file, but not its containing folder, which stays locked, even after closing Illustrator. Restarting and closing Illustrator again usually enables me to delete the folder — but not always. Sometimes I have to close everything and log out and back in to be able to delete the folder. (BTW, Acrobat and Photoshop also share this problem.)
When you have, as I do, hundreds of files to go through, this becomes a real hassle.
After downloading the Autodesk Inventor 2013, I was forced to download the hotfix. I completed the download, and started up Inventor. My force closed crash report directed me to the most updated update, which I then installed to no avail. I've sent an additional crash report, but I've yet to recieve any feedback. When I go to either load the .ipt blank file, or even close the welcome center tab (to be able to access the tools to troubleshoot) It shuts down.
Windows Vista 32-bit
ATI Radeon 3400 HD Series
Intel(R) Core 2 Duo CPU E7300 @ 2.66GHZ X2
If I were to work on a file and proceed to close it and then re-open it with the intent of undoing or recovering information, is there anyway to do this?
It may be useful for me and others to know if there is a way round in case this does happen.
When i try saving something it comes up with could not save as (file name) because the file could not be found and need to save this file.
im using photoshop cs5.1.
First off, I don't mind the save as a copy feature. If I have a psd file with layers and smart objects and such, and I Save As > JPG, I don't want the jpg open, I want the psd open. I like how PS does that behavior, but I don't like how that jpg gets " copy" added to it's file name. Yes it's easy to remove, but I'm using a batch action on over 300 pictures, I don't feel like renaming 300 jpg's. Yes it's supposed to be a safety net, but I basically never work from jpg's as original's, and if for some reason I do, I set them as read only and copy the files off to a safe location, so I don't need it.
I know it's possible because my old school's computers with Photoshop CS5 never saved jpg's with copy in the file name. So, how do I stop PS CS5 from adding copy to my file names? Because I need Photoshop to not add copy to my file names on my work computer.
I know this happens sometimes when a file won't open after saving and closing it. Usually I can open the backup file with just some lost work, but not this time. Problem is this time it happened with a file I spend a long time working on. I tried unzipping and opening riffData.cdr with no luck. I've uploaded the file. It is a complex drawing with over 20 pages including vector and bitmap objects.
[URL]
I am using Inventor 2011 and vault. When I go to insert another instance of an IFeature i get a message that says "cannot insert iFeature that is currently open for edit (see attached) The .ide file and the part used to extract the iFeature are both closed and not checked out of the vault.
The only workaround I know of is is to close the file and open it up again.
am having an Issue with CS6 when saving files. When saving a file using the 'Save' option (not 'Save As') the file is not staying at the size of the artboard as it should, it is however being aurtomatically cropped down to the actual artwork size. This is causing issues with the Process we work with as we need the file to stay at the artboard size.If I click 'Save As' and change the Adobe PDF Preset to 'Press Quality' then this works, however this means that every file we save(which is quite alot in a day) means we have to go through the 'Save As' option and manually change each save.why this has suddenly started to happen with our Illustrators and do you know how to fix this so that it stays at the Artboard size when 'Save' is used?
View 17 Replies View RelatedI found this error a bit strange, my colleague it trying to save a file and this error keeps on coming out (see attachments). When we try to save it, it only saves as a temp file. When we try to open up the temp file and try to save it, it still doesn't allow us to do. Also, when we cancel the save, the original file will be gone and he will lost all of his data. Below are the specs of the computer and version of the AutoCAD.
Computer: DELL Precision T5500
OS: Windows 7 Ult
AutoCAD Version: 2011
Also, we're using ProSteel Series 3 as well. We tried saving the file using ProSteel and just AutoCAD but it didn't do the trick. I've tried some options (listed below) that might get it to work but still no luck.
1. Restart the computer.
2. Repair / Reinstall AutoCAD.
3. Give permission to the folder (read from the forum).
I'm using the file dialog snippet as the foundation for a save as dialog box for saving a new copy of my template assembly to a project folder. Is there a way to disable the ability to click on a file in the window which puts that filename in the input box? The assembly file name is standardized and pre-"calculated" by my code and its a decent hassle if you accidentally click another file because the user would either have to rewrite the file name by hand, or cancel out of the dialog box and re-navigate to the project folder.
Inventor 2013 SP 1.1
if i need to rename or change anything in the iproperties of ipt, im doing it from the vault.my problem is that, when i change something in iproperties of an ipt thru vault, i have to open the idw to update it.
as most of the iproperties in ipt shows in the idw.
its easy to change the properties in vault. but its deleting its purpose if i have to each idw to make sure i have the updated idw.is there a code where i can open all idw and save the same file and checking to the vault automatically?
Civil 3D 2013.One of the problems my team has is that we have a number of remote offices that all work on the same drawings. To ensure integrity of the drawings, we use a Wide Area file replication and locking service to ensure the files do not become out of sync and corrupted between offices.
AutoDesk seems to open and save files and their subordinate xrefs serially in a single thread instead of in a multi-threaded manner. Because of this there is a Huge time impact on just opening and saving files at remote sites as a result of Civil 3D having to wait for the home office file lock check on each and every file before opening the next file.
We have 100Mbit down / 20Mbit up transmission links at both sites dedicated to the file replication, with Gbit backbone in both offices.
note that the remote site has a full copy of all files in its replicated share. These local files are what Civil 3D is opening. No Files are being transferred during file open unless a remote change has just occurred (proven through replication logs).
When the drawing file is opened for editing, a file lock check is performed and Windows waits for the response to ensure it can be opened for editing before telling Civil 3D. When Civil 3D has this file open, it has a list of all the xrefs for this file. Civil 3D then seems to open each file in sequence.
This is a problem when a large latency is introduced through our 3rd party Wide area file system by a remote site file lock check.
This is not AutoDesk's fault but the compounding of the two system's operational behaviours, causing a Very long wait on file open, Save, PaperSpace operations (30 minutes for large drawings).
I would like to see a multithreaded (threadpool) file open occur against the entire list of xrefs (during save as well). Then recursively executed for all subordinate xrefs of those files until the operation is complete.
As long as a file list is maintained during the operation and updated as each file operation completes (which obviously it is) in the primary thread, this should not cause any problem. All dependancies can be opened in sequence once the initial file operations are complete and when a particular file in the list is required but not open yet, it's priority can be raised in the threadpool.
I'm trying to edit some map files in the game called "Farming Simulator 2013" by GIANTS. They are png files & I can load/edit the files in paint. But after I save the files back to the proper game folder & try to run the game I get an error stating :grass_weight.png' incorrect format. Must be 8bit single channel. Is there a plug-in to save a file in this format? Am I missing something or am I just not going to be able to edit a paint,net file in paint.net? I
View 6 Replies View RelatedI have worked in Sony Vegas 9 and I was hoping Adobe Premier Pro CC was similar--- but its not. I can't figure out how to render and save a file as a windows media or mp3 or in any format for that matter.
View 4 Replies View Related