I have been happily x-reffing for years but recently my x-refs will randomly disappear when I reload them. I have checked the file name seems to be the same the paths match where the file is (on a network drive if that matters.) I defenitely haven't deleted the x-ref on the model space.
View 4 RepliesI have recently been experiencing the following problem. On completion of editing a video I have created a video file; created a new project with the video file and then proceeded to create DVD. I usually want to create more than 1 and specify, say 4. The first DVD is created correctly and plays fine on my DVD player. I then go back into Video studio (which I have left open at the relevant place) and insert the disk for the second copy. The process runs for some time and then comes up with the message "File or folder not found". I then close the program and, although I have asked it to do so, it has not saved the disc image file.
I have got around this problem by using Movie Factory to create a disc image file, from which I then create the additional copies that I need. However, this is less than ideal!
I had to update some drawings from AutoCAD 2007 and each of these drawings has at least 7 XRef files attached to it. Each of these files have about the same number of XRef files attached to them as well. These drawings keep going this way for about 3 more layers.
I copied all of the CAD files together (125 dwg files) into a new folder. I am using AutoCAD LT 2012. I opened each file to make sure each drawing is intact. Each drawing opened perfectly. However, when I saved each drawing, closed it and then opened it again to start editing things in the Current drawing, some of the XRefs were no longer attached, loaded or referenced.
Every time I open a drawing now, most of the XRef files have a status of Unloaded, Unreferenced or Not Found. The Loaded and Attached XRef files change when I close the drawing and open it again.
The Path is saved correctly for most of the missing XRef drawings, but when I use the drop down "Found At" field to apply the path again, it still does not find the drawings. A few of the XRef files have no path at all.
I have also tried to Attach the file again instead of updating the path, but it does not create a new XRef and when I open each drawing again, the same thing happens.
I have updated the path for the Unloaded XRef files and they reload successfully, but when I save and open the drawing again, they are Unloaded again or sometimes Not Found.
I have gotten to the point of opening the actual drawing of the XRef and copying into my current drawing just to not deal with the issue because I have to get things done and make progress.
I have a number of drawings that I am working on that I need to xref in image files for backgrounds. I am working in MEP 2013. Initially I am loading the xref via the insert tab then "attach" command. It loads fine, shows up , I clip and adjust its location in the dwg, save and plot and close the dwg. The next time I go to work on the dwg I cannot see the xref only the link and when I go to reload it wont let me. I receive the error "not found." I end up having to detach the file and start over. When I attach the xref I am using relative path and overlay options.
View 2 Replies View RelatedI copied and pasted special part of an excel document into AutoCAD Map 3D. But I had deleted it instead of detaching it. How do I remove it? Its says I cannot reload, detach or bind. I have 6 of those. I have 2 more that are Not Found and states the same thing. I just want them gone. How do I do it?
View 6 Replies View RelatedWhen I try to open photos that I've previously imported, Lightroom is saying "Folder Can't be found" and when I try to re-import so that it can locate the source, it won't re-import because it thinks the photos are still in the catalog.
View 2 Replies View RelatedI know that in ACAD you can use the xref manager to see where the actual file for the xref resides on your computer/server/etc. What I'm curious about is whether or not the inverse action is possible. Can you somehow access the file (not the output sheet where it's being xref-ed) and see what other files are using it as an xref?
I've come in on a project that is nearing completion and have been assigned the task of "cleaning up the project folder." Unfortunately, there are a ton of files in the different folders that are no longer in use on the final output sheets and I need to keep the ones still in use and archive the ones that are no longer needed. What I've been doing is going through those sheets and reviewing the xref manager for each sheet to see which files are actually put onto those sheets and making a physical checklist from which to organize my findings. Once the checklist is made, I then archive all the files that are no longer being used.
I keep getting a message "New files found in your watched folder". But it shows me old files. If I say I want to download them, it tells me it cannot.
PE 11 Windows 7
I have been working with LR 2.7 for a while now and was happy with it.
PC - Win XP - LR3.5
Photo's stored on external hard disk (K:)
The RAW captures of a Nikon 3100 I recently won were not being recognized/imported by LR 2.7 and I installed the 3.5 version to see if it was any better. I would have to buy it anyway by the time I switch to Win7. In 3.5 the Raw files were imported, the settings of 2.7 were nicely taken over but now and I cannot export the files I have worked on to the K: drive of the external hard drive as I used to do with 2.7.
I get the message 'The folder could not be found' though it is set in the Export Window and I am looking at it in Win Explorer.
The original RAW captures are on the D: drive but that was always the case with 2.7 as well... I am doing it exactly as I used to with 2.7.
I tried with a photo from an older folder of my usual camera and everything works fine there.The problem seems to be only with the Nikon files. Now I start wondering if there is something with raw format of this Nikon camera that is putting LR in a twist...
I am attaching a File as a xRef. At the time of Attachment, I select attach as attachment, and No Path in Path.
Now if I try to fetch detail of this file using MdiActiveDocument.Database and BlockTableRecord, I gets only file name not the path. However, In AutoCAD we can see the file path under "Found At". Can we read / fetch this using C#.
In case of Full Path or relative Path, I gets full path in btr.PathName
Here is my code and I am using AutoCAD 2013
Database db = acadApp.DocumentManager.MdiActiveDocument.Database;
using (Transaction Trans = db.TransactionManager.StartTransaction()) {
BlockTable BlkTbl = (BlockTable)Trans.GetObject(db.BlockTableId, OpenMode.ForRead,false,true);
db.ResolveXrefs(false, false);
[Code] ...........
I have been forced to check under the hood in LR due to the fact that I have lost a big chuck of my keywords, and I'm contemplanting if its worth importing a copy of my backup copy. I am debating if I should just go back and re-enter all the missing keywords, or retrieving a backup copy. However, I read somewhere that its wise to change the name of the master catalog before retrieving a backup copy.
However, I found multiple folders of my catalog in my master folder. I'd like to know which one should I delete without causing any major collateral damage.
1- folder 176-2.lrcat created 3-26-11 2:51 PM 289 MB
2- folder 176-2-2.lrcat created 2-12-13 10:32 PM 363 MB
3- folder 176-2-3.lrcat created 2-24-13 5:24 PM 287 MB
4- folder 176-2 copy.lrca created 3-26-11 2:31 PM 179 MB
In addition, there are corresponding Previews.lrdata for each folder.
Few days ago when I installed PS CC and worked with it that error did not appear. Why now? What does it means? The only updates installed on my computer since installing PS were those related to Adobe applications: PS, Illustrator, InDesign.I am on MAC with OS X 10.8.4. The same license and installation is on my second computer. That error do not appear.
View 1 Replies View RelatedUpgraded to Window 7 64 bit and autocad 2014 and now I can't make pdf's from my dwgs.The dwg to pdf pc3 file is in the same directory as the other plot files and my search path points to that directory.When I try to conver to pdf, I'm asked to select the file from the list (see attached)
View 9 Replies View RelatedMy main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files.
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6
I'm getting this error "Run-time" error '48' "File not found: *****.arx" calling functions from VBA (Autocad 2011 64b).
note that same code (VBA & ARX) works fine on 32b env.
Autocad 2008. Certain command and mouse control unable function.. which the error dialog box shown when start up launch the autocad...
" Customization file load failed. File not found: COMMANDLINE.cui
i made a survey, about 2000 points with my TSC3R6. I exported my CSV file to a PNEZD file with comma seperated. When i try ti import the file (CSV then i made a .txt), C3D tells me "no point file format match found". Then I opened the txt file, searched for any error that would not let me import my points. The only thing i have found would be the description of my points that sometimes had a space between 2 words (ex: bt balast and ht balast) so i changed it to bt-balast and ht-balast. i looked further and didnt found anything else. heres a sample of my txt file:
11251,5038721.804,370118.600,52.877,69
11252,5038722.437,370118.327,52.980,82
11253,5038725.381,370117.058,54.235,81
11254,5038725.967,370117.395,54.325,bt-balast
11255,5038727.637,370116.899,54.860,ht-balast
11256,5038728.983,370116.602,54.857,balast
11257,5038730.043,370116.150,54.839,ht-balast
11258,5038731.524,370115.635,54.345,bt-balast
11259,5038731.763,370115.674,54.308,81
11260,5038733.529,370114.961,53.606,82
11261,5038734.460,370114.525,53.505,350
Now i have to draw something but i cant even find why importing points fails in C3D.
some usefull informations maybe:
windows 7 32bits SP1
autocad civil 3d 2013 (not yet activated, next week)
Error 1308 Source File not found inventor professional 2013
View 1 Replies View RelatedI'm having a problem opening AutoCad Civil 3D 2010.
When I click the shortcut Windows starts configuration and then I get the following error message:
Error 1308.Source file not found;C:autodeskAutoCAD Civil 3D 2010
x86C3DProgram Files
ootCommon Files FolderAutodesk
sharedAdLM|R1en-UShelpBRWstylecommons.css.old.
Verify that the files exists and that you can access it. Needless to say AutoCad wont open all I get is Retry or Cancel, selecting.
Retry just gets the same error so when I Cancel I then get "Are you sure you want to Cancel" which I select and then I get the message Fatal Error during installation.
This is a downloaded install from Autodesk and I dont have discs available.
DWG TruView,Autodesk Vault 2010 and Autodesk Design all installed OK.
System detail's; OS is 64 bit Windows Home 7 Ver 6.1.7600 with IE8
CPU AMD Athlon 11 P320 Dual Core, 4 gig RAM,500GB HDD running on a new Toshiba Laptop.
I've looked around at various forum's without success.A couple of sites offer what they call a fix but it turns out to be registry scanners.
When I try to place this ipart, I get an error saying "The server returned the following information: This file is not found on any server in the replicated environment". This child part is already in vault. I tried to delete the child from Vault and I thought that I would just re-generate it. But, when I try to delete the file from Vault, I am given a restriction, but no explanation.
What can I do to get this back in sync with vault?
This is using Vault 2010.
I just opened my corridor drawing for the first time in 2009 and was greeted by this error:
Macro file not found at original path specified in subassembly. Updated macro file location to path defined by AECCCONTENT_DIR environment variable.
I'm not familiar with the maco file and the only post I found relating to this said the AECCCONTENT_DIR environment variable was abandoned in 2007.
I have a more then 10 folder(Irrigation-Telephone-electrical- general layout-profile etc) and one x-ref folder i want to attached that x-ref with all folder files in that folder more then 10 files so how can i attached that x-ref with easy way if i attached one by one its time less so any easy way to attached x-ref in multiple folder.
View 0 Replies View RelatedWhen i try saving something it comes up with could not save as (file name) because the file could not be found and need to save this file.
im using photoshop cs5.1.
I am tryiny to import coordinate file like I have so many times and the Select File box keeps telling me "No point file format match found". I click the proper file format and it shows in the Preview box but the OK box will not go dark so I can clcik on it. The file is a CSv and tried making it a txt with no luck. Using 2012.
View 6 Replies View RelatedI have one file (file A) which xrefs several files, all with various layers turned on and off. I created a new file (file B). I xref file A into file B, and ALL layers in file A's xrefs are turned on, and I have to go into layer manager and turn off all unwantd layers. Is there any way to make it so that the layer state in file A is kept, when xreffing it into file B?
View 6 Replies View RelatedWhen I click to edit a photo that I've re- imported, it says "photo missing" and "file can not be found". How can I re- access this photo and continue to edit?
View 1 Replies View RelatedI downloaded an ACS point file for LiDAR data. I was able to successfully connect it to Autocad Map 3D, and generate a surface.This is the ACS file: URL....
However when I tried to import it in Revit via Massing&Site->Topo-> Import Point File, after converting it to CSV in Microsoft Excel I get the message "No points were found in the file."
Also, the ASC file fails to import in Autodesk Recap.This is the converted CVS file: URL....I suspect that the problem might be in the ASC to CVS conversion. Any settings on doing the conversion differently?
After the fee upgrade from OSX Lion to Mavericks my Lr cannot find the previously imported and processed RAW file when the Export function is requested.
View 20 Replies View RelatedI made a cylinder which is in the attachment. When I flat pattern produce its dxf file, I am not able to get correct geometries. When I zoom into the dxf file, I see that the inner hexagon and circles project irregular shapes and are not concentric.
View 9 Replies View RelatedNearmap has provided an aerial image georeferenced in the same coord system as Google Earth (epsg:3785). I found a Map 3D coordinate system WGS84.PseudoMercator (epsg:3857) which on web forums is equivalent to epsg:3785. After loading the image into a dwg on the epsg:3857 coord system I then queried the image into a dwg file on an mga55 gda94 coord datum.
It rotated the image correctly but as we had survey located features in the drawing the image needed to be shifted a further 1.75 metres SW than the transformation that Map had performed.
My question is to confirm that the Map epsg:3857 is indeed the same as epsg:3785? Given I had to shift the image I suspect it isn't.
Nearmap have also suggested using an epsg:900913 coord datum but there isn't one in Map 3D.
I have a "steelplt.png" file that Inventor tells me is not in the correct library path. The problem is that it is in the correct path as defined by the project file. I cannot check in dwg because the "steelplt.png is not in the correct library path".
Product Design Suite Ultimate 2014
Vault Professional 2014
Windows 7 Pro SP1
HP-Z400: 2.67 GHz 12 Gb Ram
Nvidia Quadro FX1800 driver 276.42