I tried to set my project as MPEG4 with resolution 1920x1080 and bitrate 30000 but I can not find how to do it.
Even I set to another format like M2TS it can set to 1920x1080 but the bitrate is only 18000.
I am trying to render a 40 minute project as a blu-ray H264 1920x1080 file that I can then play on windows media player. I normally have no problems on short 5 min projects but on this one it tells me "frame 2914 unreadable" how do I find frame 2914?
View 5 Replies View RelatedWhen I select Create Video File > WMV > WMV HD 1080 30p the resulting file is 1440x1080!
Why does it do that? Is that really what most people think of when they see "1080"?
How do I do a standard 1920x1080 WMV with Video Studio Pro X6?
I am trying to edit and render video that was shot in 1920 x 1080 in the best quality possible but the finished product ends up being 720 x 576. When I go to project settings, the highest frame size I can select is 720 x 576, the User-defined option is greyed out. I am using Pro X2.
View 14 Replies View RelatedI've shot HD video on a Sony SR11 in .m2ts formatTS(AVC) and 1920x1080 resolution.
I'm looking to edit these short videos in a project with a format of 2.35:1 or 1920x800 as a finished project.
I'm using video studio pro4x right now but willing to upgrade if I need to to get this resolution.
I can't find an easy, out-of-the-box way to create a 1920x1080 file from my clips. My clips are shot in HD (1080p) and I can output in 1080 via .mp4, but not .avi. I've been producing in .mp4 and converting through an external tool to .avi, but quality is lost a bit.
I tried using "custom" and user-defined resolution, but the file size was enormous and didn't playback correctly in WMP. When I select the compression types, it locks out user-defined resolutions.
After lots of experimenting, I have finally found that Corel Video Studio Pro X4 is capable of rendering the 1080i 50i AVCHD videos off my Sony CX-190E Camcorder, without any motion blur.
All other softwares failed to remove the motion blur. Only this software could render the video, smoothly at 25 FPS (50 FPS isn't supported by my Samsung HDTV so I render at 25FPS)
So I was trying out VS Pro x4 before buying. But the only problem that keeps me away from buying the product is, Corel VS Pro X4 renders the AVCHD (1080i-50i) source files to HDV 1080i -50i (.mpg) files at 1440x1080, which plays vertically elongated (with two black borders on the sides) on my HDTV.
How can I make it render at 1920x1080?
If I select any other profile like WMV (and manually configure the profile at render at 1920x1080), motion blurring is present and noticeable. Only the .mpg HDV 1080i-50i are completely smooth and free from any motion blurring.
How can I make it render HDV 1080i-50i at 1920x1080, instead of 1440x1080?
X3 Pro crashes........will not even load the video.
I downloaded the video from [URL] Windows Live Movie had no problem with it and converted to a 1440 x 1080 wmv file.
Windows 7, 8 Gig ram, i5 cpu
I'm editing MPEG-4 PAL HD files from a Samsung Cam. After editing, I want to create a MPEG-4 HD file with the same profile (1920x1080 at 25 fps). Choosing MPEG4-HD profile, 30 fps files are generated. Also defining a MPEG4 custom profile with H.264-MAIN type and 1920x1080 resolution, the fps is locked at 30 (at lower resolutions, like 1280x720 the frame rate can be modifies). Ist it a constraint of H.264-MAIN video type ot a bug ?
Please consider that VS X3 is installed for PAL Video System and choosing Bluray profile or AVCHD profile PAL HD files 25 fps are generated.
I cannot find a way to keep the native resolution when exporting it to this size, even using the same as project settings, it makes it 720x480, when i look at the file when clicking properties it says uncompressed 1920x1080, how do i export it as such just a little more compressed?
View 2 Replies View RelatedMy evaluation copy of VideoStudio X4 crashes whenever it tries to write an mpeg4 file. I get a message to e-mail the DMP file but thee is no e-mail address given or found on this site.
View 6 Replies View RelatedMy first video camera was a 30 fps NTSC and I output my videos as MPEG-4 HD files. Then I bought a new PAL video camera. To be safe I uninstalled my copy of VSProX4 and reinstalled it, checking the PAL option. However, when I created my first video clip using the MPEG-4 HD option in the drop down list, it created a file at 30 fps and not surprisingly the panning was very jerky. I uninstalled the program and ticked the option to uninstall all personal data. I also deleted the VSProX4 folders from user/user/my documents/. When I reinstalled the program all my saved projects came up on the screen and it still wants to make MPEG-4 files at 30 fps.
Presumably I should have deleted the Corel folder from the progam files folder after I'd deleted the program to get rid of all personal settings. Anyway, my question is this: is it actually possible to create MPEG-4 files at 25 fps (or preferably at 50 fps as this is what I am shooting)? If so, what do I have to do to get VSProX4 to create them? Is there some way to edit the MPEG-4 HD option in the drop down list from Create a Video File? If not, is it possible to make a template for MPEG-4 HD at 25 or 50 fps? The reason I'm keen to get this right is that I can play MPEG-4 HD files from a USB stick plugged into my TV. The only other way I can watch them on TV is to create AVCHD files and write them to a DVD.
My video won't share as a MPEG-4 HD. Here are the steps I take:
1. Click the "Share" Tab
2. Click "Create Video File"
3. Click "MPEG-4"
4. Click "MPEG-4 HD
5. Select the destination folder for the output
6. Click "Save".
The progress shows 0% and the progress bar goes away after fifteen seconds. I am sharing it as an MPEG-4 HD file because it will be placed on Youtube by someone else. I've probably done four of these projects the same way and they execute just fine.
Here's some more informtion:
Brand: Dell Laptop
HDD: 464GB; Used Space 153GB; Free Space 311GB
Processsor Intel(R) Cor (TM) i7 CPU Q820 #1.73GHz 1.73GHz
Ram: 8GB
System Type: 64 Bit Operating System
Pen and Touch: Pen and Touch is available through 80 touch points
The video is a WMV2, 24 bits 1024 x768, 29.982 frames/second; Audio is windows media audio version 4, aspect ratio is 1.33 x 1.00. It is editable.
Here's how my timeline looks:
BLACK GRAPHIC = 2 SECONDS; TRANSITION (FADE TO BLACK) = 2 SECONDS; 10 SECOND CLIP; 3 SECOND CLIP; 00:42:33 CLIP.
I'm outputting DV-AVI files filmed on a Sony A1 in DV CAM as MPEG-4 videos for upload to Vimeo.The projects and source files are:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
I have been outputting to create movies with the following properties:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
I'm using VideoStudio Pro X5 trial version.
Should I in fact select / have selected Lower Field First or is Frame Based OK? Is it safer / more reliable to select Lower Field First if that's the format of the source files? The videos seem to look OK on my laptop - don't know about Vimeo.
I have VS Pro X5. My footage is shot at 1920 x 1080p with 25 fps and I would like to produce mpeg4 video file with same parameters. I select custom settings, mpeg-4, H.264 high, frame size 1920 x 1080, but then fps is set to 30 and it is greyed out. Is this the limitation of VS? Is there any way to produce high quality HD with 25 fps?
View 6 Replies View RelatedI'm using the 30-day trial version of Corel Videostudio Pro X5.
The problem is that all the videos (all files are MPEG-4) I add to the library are muted, I can't hear anything from the audio when I play it. It's the same problem when I add the clip to the timeline, it shows that the clip is normal & the audio should be fine but nothing can be heard. I've tried purposely muting it & then unmuting, I've also tried splitting audio, I've tried all possible audio settings I've found in the program but everything I've tried has no effect. I've checked a million times that the audio on my computer is on, & the videofiles play normally with perfect audio on every media player I have, but I can't hear anything in the editing software.
Is there a setting that makes the files automatically mute & I haven't noticed it, or doesn't Corel Videostudio just support MPEG-4, or is this like a weird glitch in the trial version?
I've rendered my project to MPEG4 and the audio has a light popping intermittently through it. I thought it might be caused by having multiple video overlays but only one track had audio enabled. I've now split out the audio and put it into it's own track but I'm still getting the poor quality sound.
View 12 Replies View RelatedI am using Corel VS X5. I have created MPEG4 files using Adobe Captivate and imported them into Corel. When I preview them, if I select Clip, the video looks fine. But if I preview the Project, the video is blurred. I first thought it might be caused by Smart Proxy but after disabling that feature, the problem persisted. I tried publishing the project to see if the final version would be ok. Still no luck. I tried the online chat and they suggested updating my viewers. I did as instructed and restarted my PC. Still no luck. My imported MPEG4 file is 1024x767 HD.
View 5 Replies View RelatedI can't create MPEG-4 HD 1920x1080 25fps files from my edited video's. Even creating a template with 1920x1080 and 25fps seems impossible. I only get a 30fps (default?) setting.
View 2 Replies View RelatedI recently tried to convert a 76 minute movie in mpeg 4 to mpeg 2 using the batch convert function. I first went into options and set the bit rate to 6100 kbps and the audio to Dolby 2 ch. stereo, with the bit rate set to constant. After the conversion had taken place, I found the results were excellent, except that only 38 minutes were converted. I tried it again, but still only 38 minutes and then it it finishes. Why won't it convert the full 76 minutes? The destination folder is on my "D" drive which is 1 TB, so there is lots of room.
View 3 Replies View RelatedSome of the movies I've been creating play OK in Windows Media Player but when you try and skip to a later part of the movie by holding and moving the toggle bar there is a 'Windows Media Player has a problem playing the movie' error. All the videos are the correct length and file size. Is there a problem with the files and would it affect how they play on Vimeo? Do I need to do them again? What can I do differently?
I have been creating movies with the following properties:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
The source files are:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
I'm using Video Studio Pro X5 trial version.
I have recently 'downsized' to a sanyo xacti vpc-cg100ex camera to lighten my load on holiday! this produces mpeg-4 video files which I copy straight to a folder on my laptop from the SD card.
I can put these into the vs library and tranfer them onto the timeline and add trnsitions, titles etc. however VS is closing down with increasing frequency.(same files on my old xp machine seem to work ok albeit depressingly slowly!)
I have been searching the forum and wonder if I should be converting the files to some other format before doing any editing....does that involve using the share option straight after loading the files, and if so, how?
the properties of the original file are
Type mp4 video,
1920 * 1080,
59 frames/sec, bitrate 252,
audio sample rate 48kh
the properties given for the file on the timeline are
Format Mpeg-4 file,
Vid Type H.264 Main profile video, Upper Field first,
Attributes 24bits 1920*1080 16.9
Frame rate 29.970 frames per s
Audio type MPEG AAC 48000 hz 16 bit stereo
I have not been doing any video at all for quite some time so am definately somewhat rusty.
I downloaded the trial version of VideoStudio 4 Pro to try it out and I like the interface and the ease of use. My problem is that when I capture MPEG 4 files in the timeline and go to replay them, the sound and video are very choppy and the replay skips the whole way through.
I converted the MPEG 4 files to wmv, and the video was smooth but I lost some of the image clarity in the converting process. I don't think it's my computer because the MPEG 4 files play nicely on MediaPlayer - just not on VideoStudio.
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
Let me start off by saying that I am a total lightroom beginner. I am using publish to HD or sometimes simply right click and export to a JPG with a resize to 1920x1080 and it never comes out that ways. It comes out every time to 1919x1080.
I'm shooting with a Sony ALT-A65V in 16:9 mode. You can see the original, the settings I used and the resulting JPG.
Also, I notied another posting referencing something similar but is there something lightroom does to the photo by default? Even once a photo seems to be rendered in my view it seems to change slightly after a second or two.
Buying a laptop for photoshopping (15,6 inches), is there a huge difference between 1366x768 resoluton VS 1920x1080 resolution?
There is a huge difference in the prices when looking for a bigger than 1366x768 resolution. The question is whether it makes a big deal, or should we just compromise for lower resolution for a great processor/RAM combination.
Moved Videostudio X4 from a Win 7 machine to a new Win 8 PC.
Again it seems, audio plays fine when playing a clip from the preview window but not when playing on the timeline. (I had a similar problem with X10 and reported it in an older thread.)
Am searching now for more patches (and yes, I'm aware X6 is now the current version) but nothing obvious at the moment. Have found the SP 1/2/3 downloads on Corel's pages, but as it already upgraded to SP3 just after install, I'm guessing SP 1 and 2 are already covered..
In the past I've used a Panasonic SDR-S7 video camera which produces MPEG files with no problem.
I now have a Panasonic Lumix still camera which also takes AVCHD video. The individual files play perfectly in VS12, but as soon as I try to play the project to preview it, the picture keeps freezing. I thought this could be due to the new video's being HD but I don't think the individual files could be played either.
I have been doing this project in X5 and was putting a still picture at the end. When I review the project it stops about a second or so from the end. I thought it was the song, so I took that out.
I changed the picture, did the same thing. I lengthen the time on the picture, it will place and stop about the same time from the end. Doesn't matter how long the picture is playing. If I take the picture out, the video just before it plays fine. I put a picture back in, and it does the same thing? I thought the project time may be set someplace? Doesn't seem to matter because I change the timing on the picture at the end. Stops the same place?
Certainly couldn't open an X3 in X4. If I wanted to edit/burn my X4 in the "faster" X5, why should I essentially start from scratch to take advantage of X5?
Project would be SAVED as an X5 project file, of course.
I add a video to the timeline video track (not the overlay track), and with 'clip' selected and playing... I have audio just fine, for the most part... sometimes the audio jumps and skips, and sounds garbled. With 'project' selected and the video playing, either the same thing happens as the 'clip' or there is no audio at all.
What I have discovered, is that this is common with AVI files. Other files, such as WMV, don't seem to have this problem. It affects only AVI files. The video plays just fine in WMP and VLC, as well as other video editors such as PowerDirector... so why dos VideoStudio have this odd sound issue? And I'm sure as Hell not gonna convert all my videos to WMV just to edit them.
This is on a fresh install of VideoStudio Pro X4 (as well as Windows), no updates, no Service Packs, no nothing... even WITH SP1 it's still does it. I've also removed and reinstalled my codec packs (from K-Lite to Shark007) with no difference.
I've also hear that people are now having this issue with VS Pro X3 as well (I have X3 to) so I assume it's pointless to install X3 as well. I really do NOT like using any editing software other than X4, since it's the best one I've used... so I do not want a reason to use something else.