I've shot HD video on a Sony SR11 in .m2ts formatTS(AVC) and 1920x1080 resolution.
I'm looking to edit these short videos in a project with a format of 2.35:1 or 1920x800 as a finished project.
I'm using video studio pro4x right now but willing to upgrade if I need to to get this resolution.
When I select Create Video File > WMV > WMV HD 1080 30p the resulting file is 1440x1080!
Why does it do that? Is that really what most people think of when they see "1080"?
How do I do a standard 1920x1080 WMV with Video Studio Pro X6?
I am trying to edit and render video that was shot in 1920 x 1080 in the best quality possible but the finished product ends up being 720 x 576. When I go to project settings, the highest frame size I can select is 720 x 576, the User-defined option is greyed out. I am using Pro X2.
View 14 Replies View RelatedI tried to set my project as MPEG4 with resolution 1920x1080 and bitrate 30000 but I can not find how to do it.
Even I set to another format like M2TS it can set to 1920x1080 but the bitrate is only 18000.
I can't find an easy, out-of-the-box way to create a 1920x1080 file from my clips. My clips are shot in HD (1080p) and I can output in 1080 via .mp4, but not .avi. I've been producing in .mp4 and converting through an external tool to .avi, but quality is lost a bit.
I tried using "custom" and user-defined resolution, but the file size was enormous and didn't playback correctly in WMP. When I select the compression types, it locks out user-defined resolutions.
After lots of experimenting, I have finally found that Corel Video Studio Pro X4 is capable of rendering the 1080i 50i AVCHD videos off my Sony CX-190E Camcorder, without any motion blur.
All other softwares failed to remove the motion blur. Only this software could render the video, smoothly at 25 FPS (50 FPS isn't supported by my Samsung HDTV so I render at 25FPS)
So I was trying out VS Pro x4 before buying. But the only problem that keeps me away from buying the product is, Corel VS Pro X4 renders the AVCHD (1080i-50i) source files to HDV 1080i -50i (.mpg) files at 1440x1080, which plays vertically elongated (with two black borders on the sides) on my HDTV.
How can I make it render at 1920x1080?
If I select any other profile like WMV (and manually configure the profile at render at 1920x1080), motion blurring is present and noticeable. Only the .mpg HDV 1080i-50i are completely smooth and free from any motion blurring.
How can I make it render HDV 1080i-50i at 1920x1080, instead of 1440x1080?
X3 Pro crashes........will not even load the video.
I downloaded the video from [URL] Windows Live Movie had no problem with it and converted to a 1440 x 1080 wmv file.
Windows 7, 8 Gig ram, i5 cpu
I am trying to render a 40 minute project as a blu-ray H264 1920x1080 file that I can then play on windows media player. I normally have no problems on short 5 min projects but on this one it tells me "frame 2914 unreadable" how do I find frame 2914?
View 5 Replies View RelatedI cannot find a way to keep the native resolution when exporting it to this size, even using the same as project settings, it makes it 720x480, when i look at the file when clicking properties it says uncompressed 1920x1080, how do i export it as such just a little more compressed?
View 2 Replies View RelatedI can't create MPEG-4 HD 1920x1080 25fps files from my edited video's. Even creating a template with 1920x1080 and 25fps seems impossible. I only get a 30fps (default?) setting.
View 2 Replies View RelatedLet me start off by saying that I am a total lightroom beginner. I am using publish to HD or sometimes simply right click and export to a JPG with a resize to 1920x1080 and it never comes out that ways. It comes out every time to 1919x1080.
I'm shooting with a Sony ALT-A65V in 16:9 mode. You can see the original, the settings I used and the resulting JPG.
Also, I notied another posting referencing something similar but is there something lightroom does to the photo by default? Even once a photo seems to be rendered in my view it seems to change slightly after a second or two.
I have been using VS since version VS5 and lately VS X2. Now I have upgraded to VS X4 Pro, the box version.
The installation went well and am just performing some tests. I was curious in the new facility with converting 2D to 3D.
I followed the manual and tried with one clip and went to the Share step where I selected Create videofile, selected 3D and DVD as well as AVCHD. My clip was in full HD. I went to the Options menu where I ticked 3D Simulator and Anaglyph.
The result after rendering however was only a white screen but with the sound from the clip. When rendering the same clip to DVD or AVCHD in the "normal way" everything was OK.
As Microsoft started to eliminate DVD support in his flagship OS I'm thinking about converting DVDs content to a more modern standard (e.g. mp4 (H.264)).
In X5 SP1 I'm facing an unexpected problem. There is no matching resolution. DVDs use 720x480 (NTSC) or 720x576 (PAL) but in the convertor I cannot find matching resolution in mp4's container for H.264 MAIN nor BASELINE
nor HIGH profile encoders.
Is this a X5 implementation error or a 'feature' dictated by a standard.
Looking at the differences of frames per second and vertical lines of NTSC and PAL I am wondering if video recorded in AVCHD NTSC can be successfully converted to PAL or will there be a noticable difference in picture height and speed?
View 14 Replies View RelatedFamily DVD - Footage has been shot in the UK (PAL camera) and edited in X3 - everything at 25 fps. I've managed to render a new mpeg2 file of the completed work n NTSC (29.97 fps). All of this in X3. I can see it's 29.97 by looking at the Properties of the new file.
But how to get this file onto a DVD at 29.97? I've tried bringing the 'NTSC' file into MovieFactory SE but I can't then get the Project Settings to show NTSC - only PAL.
I've set the Disc Template Manager to NTSC but if I then look at the Project Settings it's at 25 fps and I can't change it. If I go back to the Template Manager it's showing PAL again!!! I'm sure I didn't have any of this trouble in X2!!
So how can I burn a good quality DVD in NTSC format from my PAL project?
I copied some videos to a DVD using a Panasonic DVD recorder and was trying to put them on my computer for storage and playback. It was three TV shows in VOB format with IFO files in the folder as well. Initially, the only way I could get anything to play was with the video TS file with windows media player, as my computer does not recognize VOB. This doesn't really work as they need to be stored separately given that they are different shows. Further complicating it is that instead of 3 VOB files, there are 5, so the episodes are spilt in the middle of some of them.
I came across this old thread viewtopic.php?f=1&t=19926&view=previous . I can't import from DVD because it reports it's not a valid format. I was able to rename them to mpg files, but have some issues. When played individually with windows media player, file 01 only plays 5 minutes of the video (About 20-25 minutes are just missing despite being over 1 gig) and the actual video is missing, just the audio plays (the video for that 5 minutes does play in vs x4, it is complete and works fine when playing from the video_ts file in windows media player). The others work fine. Each episode is about 42 minutes. Also noted that 01 is listed as being half of the resolution of the others.
When I try combining files and saving as various mpg options or flv, I either lose audio altogether at certain parts, or it is badly delayed/mismatched and the part that is not showing when I play file 01 alone is missing from the combined video as well. I also tried it in windows moviemaker, but it can't play the files at all.
I have a mp4 video with frame size 1280*720 and data bitrate 4442 kbps and I want to convert it to mpeg2. if I convert it using the simple way in vs pro x6 through dvd then mpeg2 it will convert it with higher size and higher bitrate. What data rate should I put using custom then mpg files to keep same quality and size.
View 4 Replies View RelatedIs there a way that you can convert a 4.3 import to a 16.9 output? I have imported a musical from a disc which is recorded in 4.3. I would like to output this as a widescreen video. I have tried putting in on the overlay track which gives a better output result but still has the borders each side.
View 5 Replies View RelatedBuying a laptop for photoshopping (15,6 inches), is there a huge difference between 1366x768 resoluton VS 1920x1080 resolution?
There is a huge difference in the prices when looking for a bigger than 1366x768 resolution. The question is whether it makes a big deal, or should we just compromise for lower resolution for a great processor/RAM combination.
I'm trying to burn +/- 1gb .mov/mp4 files to dvd to watch on a dvd player hooked up to a tv. I tried burning the mov/mp4 files directly to dvd but my dvd player isn't able to read them. VideoStudio 12 was included on my computer, will it convert mov/mp4 files to a format that can be burned to a dvd that I can watch on my tv?
I don't need to edit the files, just burn them to dvd in the highest quality possible to watch on my tv. If it will, are there any tutorials on how to do this?
I am converting some video from VHS tapes starting by copying my VHS tapes to my DVD player/recorder's harddisk. I then intend to copy from the hard disk to DVDs and don't mind copying at the maximum resolution. I will then import those DVD's into VS and edit. What I want to know is what is the maximum bit rate I should use so that I don't loose any resolution (my VHS is bad enough as it is) but also fit as much as possible to a single sided DVD. As the resolution of VHS is nowhere as good as DVD I would have thought that it would be a waste of space to output at say 7500kbs.
View 14 Replies View RelatedI am having issues converting AVCHD Video (.MTS) videos to WMV HD 1080 30p. (16x9) When I try to use this default option the final result never comes out 16x9 widescreen. The original is 16x9 widescreen. (In the settings tab it is checked to be 16x9).Now if I use the WMV HD 720p, it will be 16x9 widescreen (using same original video).
I am pretty sure this did work fine when I first installed this software, but something has changed...and I know I have not touched any settings at all.
I am attempting to pull .SWF files from a CD and edit in Pro X3. It is a training video that works with Explorer. Whenever I convert the files to AVI, Mpeg, etc., I lose the audio.
View 9 Replies View RelatedCan I import XMF files into Video Pro X5 without first converting them? I cannot find the answer to this on the sales information. Also is there any way to import those XMF files into my current version (Video Pro X2).
View 9 Replies View RelatedI upgraded to VS X4 SP1 having successfully used its predecessors for many years. However, I now cannot burn a DVD as it fails in the Converting Video of the title (001/001] step.
My clips are captured by firewire from a Sony camcorder in DVI format. In this project I am using transitions, moving menus, 12 chapters and titles extensively.
My workflow is as follows: Share, Create Disc, DVD, Use first clip as introductory video is unchecked (patched dll file for Unknown Error installed), use Smart Scene Menu, Burn. Timeline is 1:26:54:22 so I select Yes to fit to DVD. PC crashes anywhere between 6 and 18 minutes later. Do not convert compliant MPEG files is checked.
I have tried various other things and can successfully burn a video under 30 min on the timeline without and transitions, chapters or menus.
My project properties are Microsoft AVI, PAL 25fps, 24 bits, 720x576, 4:3, Lower Field First, DV Video Encoder - type1
Clip properties are the same with 32000kHz, 12 bit Stereo audio as per attached file.
The converting video of the title step takes up to 30 min to complete for a 20 - 30 minute project, so seems like a proportionally high time of total job.
How do I go about converting MOV files into DV or mpeg files to edit? When I import the files are choppy I downloaded the quicktime, dvx and direct x files. No success.
View 9 Replies View RelatedWhenever I want an image that I have edited in Photoshop to look good in a browser, I have to convert the image to my monitor's profile for it to look the way it did in Photoshop. So, the workflow is 1) finish editing 2) convert to profile for my monitor's profile 3) Save for web...
Color mgmt makes my head swim but I sort of see why this is. But my question is, most places on the web, I see people are just converting to SRGB for the web and I will say that that does not work for me at all. Does that mean they are talking about converting the color space and not the profile?
I admit that my monitor in its uncorrected stated is way off. That is to say, after I run the Spyder software my monitor colors look a LOT different. I shouldn't think this would matter but I'm just throwing it out there. I am a Windows user.
The reason I am asking this is because when I try converting images on export in LIGHTROOM to my monitor profile it does no good. The image looks terrible in the browser.
Am I missing something? Do I have a setting set wrong somewhere or does everybody have to convert to the monitor profile to get stuff to look right in a browser.
I have a milti picture file on photoshop that is too big to copy to a single cd. Is there a way that I can convert this to a pdf slideshow that will fit?
View 12 Replies View RelatedWhere you convert to B & W on Version CS2. I had elements 8 for a while until I went into the big leagues and there was a nice area there where I had several 'programmed' options for different variations of B & W for the same photo to choose from. Where is that on CS2?
View 8 Replies View RelatedI am trying to convert from CDR to EPS because the print shops in my country don't use CorelDraw.
The thing is, what shall I do before converting from CorelDraw? I exported it and saved it as EPS, I tried the same as PDF then opened it with an Adobe Illustrator and saving it to EPS but as you can see in the attachment, they are different, even the pictures that I imported while using CorelDraw, they became blacker!
I have upgraded my Adobe reader to XI and when converting DWG to PDF the files comes out very heavy (heavier than the DWG!) and all curved lines comes out very very light comparing to straight lines.
View 2 Replies View Related