VideoStudio :: How To Render At 1920x1080 Instead Of 1440x1080
Nov 21, 2012
After lots of experimenting, I have finally found that Corel Video Studio Pro X4 is capable of rendering the 1080i 50i AVCHD videos off my Sony CX-190E Camcorder, without any motion blur.
All other softwares failed to remove the motion blur. Only this software could render the video, smoothly at 25 FPS (50 FPS isn't supported by my Samsung HDTV so I render at 25FPS)
So I was trying out VS Pro x4 before buying. But the only problem that keeps me away from buying the product is, Corel VS Pro X4 renders the AVCHD (1080i-50i) source files to HDV 1080i -50i (.mpg) files at 1440x1080, which plays vertically elongated (with two black borders on the sides) on my HDTV.
How can I make it render at 1920x1080?
If I select any other profile like WMV (and manually configure the profile at render at 1920x1080), motion blurring is present and noticeable. Only the .mpg HDV 1080i-50i are completely smooth and free from any motion blurring.
How can I make it render HDV 1080i-50i at 1920x1080, instead of 1440x1080?
View 3 Replies
ADVERTISEMENT
Sep 28, 2012
I am not used to work with HDV therefore my question: did somebody ever create an hybrid DVD disc straight from a 1440x1080 (HDV) file (possible in VS), or is the usual(better?) way to first rescale to 1920x1080. Is this disc then playable on a stand-alone BD player, which normally can play the 1920x1080 versions.
View 14 Replies
View Related
Nov 10, 2013
When I select Create Video File > WMV > WMV HD 1080 30p the resulting file is 1440x1080!
Why does it do that? Is that really what most people think of when they see "1080"?
How do I do a standard 1920x1080 WMV with Video Studio Pro X6?
View 1 Replies
View Related
May 23, 2013
I am trying to edit and render video that was shot in 1920 x 1080 in the best quality possible but the finished product ends up being 720 x 576. When I go to project settings, the highest frame size I can select is 720 x 576, the User-defined option is greyed out. I am using Pro X2.
View 14 Replies
View Related
Apr 11, 2013
I've shot HD video on a Sony SR11 in .m2ts formatTS(AVC) and 1920x1080 resolution.
I'm looking to edit these short videos in a project with a format of 2.35:1 or 1920x800 as a finished project.
I'm using video studio pro4x right now but willing to upgrade if I need to to get this resolution.
View 5 Replies
View Related
Jan 14, 2011
I tried to set my project as MPEG4 with resolution 1920x1080 and bitrate 30000 but I can not find how to do it.
Even I set to another format like M2TS it can set to 1920x1080 but the bitrate is only 18000.
View 4 Replies
View Related
Dec 3, 2011
I can't find an easy, out-of-the-box way to create a 1920x1080 file from my clips. My clips are shot in HD (1080p) and I can output in 1080 via .mp4, but not .avi. I've been producing in .mp4 and converting through an external tool to .avi, but quality is lost a bit.
I tried using "custom" and user-defined resolution, but the file size was enormous and didn't playback correctly in WMP. When I select the compression types, it locks out user-defined resolutions.
View 4 Replies
View Related
Nov 3, 2010
X3 Pro crashes........will not even load the video.
I downloaded the video from [URL] Windows Live Movie had no problem with it and converted to a 1440 x 1080 wmv file.
Windows 7, 8 Gig ram, i5 cpu
View 1 Replies
View Related
Jan 21, 2012
I am trying to render a 40 minute project as a blu-ray H264 1920x1080 file that I can then play on windows media player. I normally have no problems on short 5 min projects but on this one it tells me "frame 2914 unreadable" how do I find frame 2914?
View 5 Replies
View Related
Jan 26, 2012
I cannot find a way to keep the native resolution when exporting it to this size, even using the same as project settings, it makes it 720x480, when i look at the file when clicking properties it says uncompressed 1920x1080, how do i export it as such just a little more compressed?
View 2 Replies
View Related
May 21, 2011
I can't create MPEG-4 HD 1920x1080 25fps files from my edited video's. Even creating a template with 1920x1080 and 25fps seems impossible. I only get a 30fps (default?) setting.
View 2 Replies
View Related
Sep 13, 2012
I have WINDOWS 7 on a toughbook and vx4 and I will try to SHARE>CREATE VIDEO FILE> MPEG and it will start to render and get to around 90-99% and then the render box goes away and the files won't be made. This used to happen once in a while and i woul just run it again and it would work, sometimes I would try to render as a different kind of file but now I can't get it to render anything. The box simply disappears after 90%.
View 3 Replies
View Related
Feb 5, 2011
I have WMV 1080p30 source files that I am trying to render to an 5-6min MP4 HD file for upload to Youtube. I am able to make WMV HD files, but wanted to see if MP4 HD files would make a better final outcome on Youtube (Youtube seems to add a lot of jaggies to my WMV uploads). However, whenever I try to render anything to MP4 HD, VSX3 crashes (it never gets past the "Creating files" message). The windows error log states that the faulting modules are kernel32.dll and ntdll.dll. I have QT 7.6 (not the latest) installed. I have XSVX3 updated to SP2 (although the file downoaded was patch3.exe). In the Make Movie template and in Share/Custom , I don't get the option to see/manipulate any MP4 HD formats or even use H.264 compression. When I bring up Mpeg-4, it allows me to use mainly standard-def or non-HD resolutions and on-H.264 codecs. Is it not seeing the profiles/codecs for HD H.264 from Quicktime? Do I need QT Pro or just the free QT? I can render MP4 non-HD. As an aside, I see no sign that CUDA is being utilized.
View 1 Replies
View Related
Oct 4, 2011
If I render a Videostudio-file of 15 minute in .mpeg, it is about 750 000 great, if I render it in .mp4 it grows to 1.200 000, why?
View 5 Replies
View Related
May 14, 2011
I would like to convert my AVI files captured from my dV Sony camera (uses the small digital tapes) into mp4 files to save space on my drive.
I was able to render one AVI file to my hard drive but the next time it crashed and wont let me do it again, no matter what I tried. I also downloaded the latest patch.I did used the enhance mpeg rendering and seemed to work.
What video file format would give me the same video quality as the original AVI captured from my camera?Should I use mp4 or there is a better alternative since keeps crashing the program?
View 9 Replies
View Related
Aug 21, 2011
I just upgraded to x4 from x2. Using x4, if I render to the iphone h.264 640x480 template, rendering seems to complete normally, progress bar goes to 100%, but after that no file is created and no file plays (if autoplay is checked).
I experimented with making a custom h.264 template, and found that this always happens if audio is aac 48000. If I change to 44100, everything works.
But I'd like to be able to use 48000.
View 3 Replies
View Related
Feb 24, 2011
I don't know if I changed a setting or what, but now, when it renders, the CPU is rather idle?! Yet the render speeds are not bad! What?! I bought the product because it said it had GPU rendering. That is great, but I want both! Also, is there a way to see GPU usage like task manager CPU rendering? I would like to maximize utilization to minimize my rendering time. I have an NVidia 460 786MB GPU.
View 3 Replies
View Related
Oct 3, 2011
I have a project I'm trying to render to an mp4...I previously rendered 2 different versions of it, then after this morning when I re-edited and finished the project, it doesn't let me render an mp4.
If I try to render, it goes through the whole process and then I watch as the file disappears when rendering is complete. It let me render to an AVCHD file, but it won't let me render an mp4 from it. I tried uninstalling/reinstalling VS x4 and installing the SP but nothing works.
View 2 Replies
View Related
Jun 19, 2011
It's an element contained in a .vsp. Right now I'm trying to "connect" & render 1 video file + 4 .vsp (inttertitle card.mp4, segment1.vsp, ... segment4.vsp). Each contains segments that run continuously and I need to combine into just one video file (mp4 HD format). But every time the render reaches that file (above) (17% of the total render), it crashes. There's nothing else on that timeline except that mp4 file and a wav file. I don't understand why it's happening. I have done it successfully before in Youtube HD format.
Smart Proxy is enabled, but I don't see how that's relevant to rendering. I have tried re-converting the video file into versions: one has .mpeg4 codec, the other has .H264. I also downloaded & installed VSPX4 SP1, updated my codecs, drivers, downgraded Quick time. But the result is still the same as far as rendering the whole project goes: crashing at 17%.
There were enough RAM & CPU when I did the rendering so I don't think this is a hardware issue. I also tried disabling Smart Render just to see if it will react positively.
There came a time also when the render passed 17%, but it crashed when it reached 94%. Interestingly, when I rendered segment1.vsp only (to mp4 HD), it also passed 17%, but then it failed to finish also. Right now, I'm going to re-convert the file to a different format to see if the whole crash is related to mp4 (I have rendered many mp4s just last week and they were successful).
So I'm curious, is there a limit to how many "connected" .vsp files one can render successfully? And is there a certain mp4 type that VSP can't handle properly?
View 5 Replies
View Related
Jul 30, 2012
Let me start off by saying that I am a total lightroom beginner. I am using publish to HD or sometimes simply right click and export to a JPG with a resize to 1920x1080 and it never comes out that ways. It comes out every time to 1919x1080.
I'm shooting with a Sony ALT-A65V in 16:9 mode. You can see the original, the settings I used and the resulting JPG.
Also, I notied another posting referencing something similar but is there something lightroom does to the photo by default? Even once a photo seems to be rendered in my view it seems to change slightly after a second or two.
View 6 Replies
View Related
Jun 20, 2011
I have Video Studio Pro X3. I've never had a problem since I got it, but recently I've been trying to render video at 60 frames per second. I've looked everywhere online for tutorials but still don't understand how to do it. I keep getting 29.97fps in the end. I need it for a project and I need it very soon.I use MP4 video files at 60fps.
View 10 Replies
View Related
May 28, 2011
I am trying to render to DV 4:3 with video studio 4 but the finish video is missing a piece.
Video Studio 4
OS - XP
View 1 Replies
View Related
Oct 29, 2013
Few months back i switched to HD from SD and then i had many problems with rendering. Finally i had selected "IPAD HD" for rendering. Thats not full hd. But i want my videos in FULL HD. What combination will be best for it?
My video's specs are:
Video
.mp4 files
1920x1080 Frame size.
Data Rate: 15055kbps
Frame rate: 29 frames/persecond
Audio
Bit Rate: 254kbps
Stereo
Audio sample rate: 48khz
What setting will be good for rendering in 1920x1080?
View 14 Replies
View Related
Aug 4, 2009
Video Studeo Pro X3 crashes when starting to render. This forum will not let me upload the .DMP file.
View 12 Replies
View Related
May 8, 2010
Up until recently I had been able to capture a VHS movie using the ADVC-110, edit the avi files and put in transitions, save to a vsp file. Next I would go to Share> Create Video File> Custom. Since this an old movie of only fair quality I would select a bitrate of 6000. I was previously able to render 3 different movies of approx. 70 minutes in lenghth to mpeg-2 in 1 1/2 hours each. Now it suddenly takes 6 to 8 hours per movie. The cpu will go like gangbusters and render the first 50% of the movie in just 20 minutes, and then slow down and take hours for the last 50%. I have Spy Sweeper and other running progs. and apps. shut off, screen saver disabled, internet connection off and D-Link not in use. I am using my "D" drive for all my files, which has nearly 1 TB, and I have plenty of available memory. what causes it to slow down, and what I might try? OS: XP; MB: ASUS P5QL-E; GC: NVIDIA GeForce 9500 GT; SC: Real tek High Def Audio; Processor: Intel 2 Core Duo @ 3.33 GHZ; Hard Drive: C: 300 GB, D: 1 TB; Memory: 3GB.
View 2 Replies
View Related
Oct 25, 2012
I'm running VSP x5 and have made a 90min film with my AVCHD 1920x1080 files. I'll be making some SD discs and HD discs. There wasn't a lot of enhancements to the footage except for several clips that needed a few filters put in. The Project Settings are MPEG Standard Definition dimensions.
When I edit my project, I always observe the Smart Proxy Queue manager, wait until everything coverts, and I get very good smooth action in editing. (probably a solution to many of the problems that needlessly occur elsewhere in the forum).
However rendering takes AGES and AGES (reached 40% after 4hrs). The box is checked "Perform Smart Render". Why is it when I've already waiting for files to be downsized when I first added the clips to the timeline....can I not take advantage of these and save time?
What else can I do to speed up render time?
View 2 Replies
View Related
Jun 23, 2013
Video Studeo Pro X3 crashes when starting to render. This forum will not let me upload the .DMP file.
vstudio_1.6.2.21_20130623_141428.DMP 940KB
View 5 Replies
View Related
Mar 17, 2012
I upgraded to X5 specifically for m2t 1980x1080 50p rendering but when it reaches between 50%-60% it stops. No error message comes up and the program doesn't shut down, just goes back to the "Share" screen.
I am currently trying to render a 23 minute slideshow containing only JPEGS, no video. After 3 tries using slightly different rendering settings each time, I tried a 13 minute video containing 50p Full HD video and that seemed to render fine. I am using a Toshiba Satellite L500 laptop but as far as i can tell it is within the minimum requirements for X5.
The last settings I used to render mt2 were:
1980x1080 @ 50 fps
PAL HDMV
Quality- 70
Video Format -MPEG-2 (also have tried H.264)
Video Data Rate - Variable 25000kbps
View 14 Replies
View Related
Feb 23, 2012
I have a DSLR camera canon 550d,i shoot videos in pal 1280-50p and I want to know what is the best rendering settings in COREL PRO X4 to this kind of file? COREL has two options : WMV 720P and HDV 720P are they good? Or should I build a specific template file.
View 2 Replies
View Related
Oct 14, 2011
i bought VSP4x about a month ago to try to get back into video editing (was originally using Media Studio on my XP machine but it isn't supported on Win7) and was working fine with video acquired through the method capture -> edit - > share. but once i started bringing in videos from other sources it started going bonkers. one source i get my video from is a screen capturing program called Bandicam. it creates standard Mpeg encoded VBR AVIs. i would editing my footage cut, and snip where needed. add some text and then render. as soon as it hits 1% of rendering it will come back with a unspecified error and give me a dump files to send to tech support. i then proceed to find tech support but was unable to find any sorts on the website that wasnt going to cost me $20 just to send an email. i searched everywhere i can after that for a solution. couldnt find one.
Properties of your source files, including video, audio, image files (format, file size, where did you get it?): Program: Bandicam Files:.AVI(Mpeg encoded VRB) size:200-300MBs
What devices are involved and their mode of connection?:There are no devices.
Project Properties (important):
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
Output format (file, DVD, VCD, SVCD):Share-> upload to web-> youtube-> MP4HD 16:9
Output Properties (cogwheel in lower left of burn screen): Standard for youtube MP4 HD 16:9
PAL or NTSC: NTSC
Error Codes (if any): unspecified error code
View 6 Replies
View Related
Nov 4, 2011
basically I record using the hauppauge HD-PVR which records the clips in the M2TS format. I've been using Videostudio Pro X3 to edit the files and rendering them and have had no problems until now. I used to render my videos using the WMV HD 720 25p setting and the quality has always been perfect.
Recently though I tried to render a video using the same setting and it renders the video really quickly and the quality looks terrible.How to fix it so it renders the way it used to or would know another format that would give me the same results?
I was thinking of re installing pro X3 in the hope of it working the way it used to but i don't know if i will lose all my projects that i'm currently working on.
View 5 Replies
View Related
