I have a DSLR camera canon 550d,i shoot videos in pal 1280-50p and I want to know what is the best rendering settings in COREL PRO X4 to this kind of file? COREL has two options : WMV 720P and HDV 720P are they good? Or should I build a specific template file.
View 2 Repliesbasically I record using the hauppauge HD-PVR which records the clips in the M2TS format. I've been using Videostudio Pro X3 to edit the files and rendering them and have had no problems until now. I used to render my videos using the WMV HD 720 25p setting and the quality has always been perfect.
Recently though I tried to render a video using the same setting and it renders the video really quickly and the quality looks terrible.How to fix it so it renders the way it used to or would know another format that would give me the same results?
I was thinking of re installing pro X3 in the hope of it working the way it used to but i don't know if i will lose all my projects that i'm currently working on.
When trying to render a project file on VS Pro X2 using files from my new Immortal Video Eye Gear sunglasses. The files are in the following format:
Resolution HD 1280 x 720P
Recording Speed 30fps
Video Format H.264
Video File .MOV
I have loaded them on the timeline with no problems, but when I try to play back the project or try to produce an mpeg file to upload on YouTube using "Share - Create Video File" VS closes down with an error message. This is the first time I have used HD in VS Pro X2, and so I am not sure what option to select when using the Create Video File option...
Previously I have only ever used SD video files from my Sony Handycam, and this is the first time I have tried to produce a movie from the video sunglasses footage...perhaps I am not selecting the correct output file format (or maybe it is related to the MOV files being 30fps and not the UK standard 25fps?). The data rate for the files is approx. 6550 kbps and the Total Bitrate is 7062 kbps. Audio is mono 512 kbps (32 KHz).
Unfortunately the error message is not useful ...it just says VS had to close - no clues whatsoever.
My input video is from .mov files from a Canon SX-30 IS with these properties:
Video:
Attributes: 24-bit, 1280 x 720
Frame Rate: 29.970 frames/sec
Sound:
Compression: 16-bit, Little Endian
Attributes: 48 KHz, 16-bit, Stereo
I wish to record to DVD disc at same or similar quality but 720 x 480 is the best I can seem to get from VS x 4 Pro "Ultimate".
In: Settings > Preferences > Performance > Video Save Options > Frame Size - "User Defined" is not available and the highest resolution in "Standard" is 720 x 480. Where is the information I need?
Any good 3d party texture baker. They bake hi-res things forever and neigther can bake complex procedural shaders and details with transparency properly.
Is there any 3d party render that could be considered for texture baking? I tried Vray but it's even slower in baking. Is there anything other to try? I mean something with a speed of Modo texture baking for example?
Looking for uick render settings for texture baking? Mental rey or scanline. Prerhaps I should degerade or avoid something not tailored for texture baking. What would be a prefered way for indirect illumination or ambient occlusion? Is there a renderer that would respect edited vertex normals on low poly shells while doing baking?
My render settings window will not appear. It used to, but then mysteriously stopped. how to get it back? I done the reboot thing but it never comes back.
View 2 Replies View RelatedJust installed Extension for Maya 2014 SP 1.
When I open a fresh scene, load MR and go to Render Settings my Quality, Indirect Lighting and Options tabs are not working. Quality is minimised to the top left and the others are blank.
I've tried the following :
- Uninstalling Mental Core
- deleting all prefs, scripts etc
- deleteUI unifiedRenderGlobalsWindow; buildNewSceneUI;
Attached are what I see in each of the problem tabs and below is all output from the script editor as I open Maya, load mental ray and then click on each tab in turn.
file -f -new;
// Warning: file: D:/Program Files/Autodesk/Maya2014/scripts/startup/rememberViewportSettings.mel line 43: Active stereo does not work with Aero enabled. Active stereo has been disabled. //
// untitled //
commandPort -securityWarning -name commandportDefault;
// AbcImport v1.0 using Alembic 1.5.0 (built Aug 6 2013 14:15:56)
// mental ray for Maya 2014
// Mental ray for Maya: using startup file D:/Program Files/Autodesk/mentalrayForMaya2014//maya.rayrc.
[code]....
In my project I use an off-screen device to render the scene; I need to tweak some render settings (just load a default preset could be a good starting point), but I can't figure out how to do this with an off-screen device!
View 2 Replies View RelatedI've even tried the old open a new file, and import the file that has no render setting information, and that works maybe 10% of the time.
View 1 Replies View RelatedI've been printing for years with PS 5.5, 7, CS, & now CS3.
I've always allowed Photoshop to manage colors,; No color Management selected in Printer Driver, correct paper choice as provided by media Co., correct profile as provided by media Co., in Print Dialog.
In the past, what I saw on screen was extremely close to the printed results.
I just started printing again, with CS3, and though the prints look fine on the monitor, when viewed in CS3's Print Dialog with "Match Print Colors" / Soft Proof selected, the image not only turns much darker, but there is absolutely no hint of highlight "pop" left----Even the effect of sharpening disappears. The white borders even turn to a dull, bluish gray & the entire image assumes a dark, flat, dull appearance, and that's the way it prints!
This occurs with image files that have printed fine previously, and have not been altered in any way.
I've tried reinstalling the Printer driver,
I know CC definitely won't work, but I'm on a 13 inch Macbook Pro. The system requirements for CS 6 state you need 1280 x 900, but mine is 1280 x 800! Will the software be buggy and messy? Or will it run alright? Also, I have an external monitor which I can lug to work tomorrow, and that definitely has enough pixels, but I'd really prefer not to do that! Is any success with these dimensions?
View 3 Replies View Relatedjust got a new PC with Vista, hooked my Epson 1280 printer and it works fine,however, in Photoshop print dialog the printer does not show up in the printer profile drop down menu. I downloaded the drive from Epson installed it but still no profile for the printer,
View 7 Replies View RelatedI have WINDOWS 7 on a toughbook and vx4 and I will try to SHARE>CREATE VIDEO FILE> MPEG and it will start to render and get to around 90-99% and then the render box goes away and the files won't be made. This used to happen once in a while and i woul just run it again and it would work, sometimes I would try to render as a different kind of file but now I can't get it to render anything. The box simply disappears after 90%.
View 3 Replies View RelatedI have WMV 1080p30 source files that I am trying to render to an 5-6min MP4 HD file for upload to Youtube. I am able to make WMV HD files, but wanted to see if MP4 HD files would make a better final outcome on Youtube (Youtube seems to add a lot of jaggies to my WMV uploads). However, whenever I try to render anything to MP4 HD, VSX3 crashes (it never gets past the "Creating files" message). The windows error log states that the faulting modules are kernel32.dll and ntdll.dll. I have QT 7.6 (not the latest) installed. I have XSVX3 updated to SP2 (although the file downoaded was patch3.exe). In the Make Movie template and in Share/Custom , I don't get the option to see/manipulate any MP4 HD formats or even use H.264 compression. When I bring up Mpeg-4, it allows me to use mainly standard-def or non-HD resolutions and on-H.264 codecs. Is it not seeing the profiles/codecs for HD H.264 from Quicktime? Do I need QT Pro or just the free QT? I can render MP4 non-HD. As an aside, I see no sign that CUDA is being utilized.
View 1 Replies View RelatedIf I render a Videostudio-file of 15 minute in .mpeg, it is about 750 000 great, if I render it in .mp4 it grows to 1.200 000, why?
View 5 Replies View RelatedI would like to convert my AVI files captured from my dV Sony camera (uses the small digital tapes) into mp4 files to save space on my drive.
I was able to render one AVI file to my hard drive but the next time it crashed and wont let me do it again, no matter what I tried. I also downloaded the latest patch.I did used the enhance mpeg rendering and seemed to work.
What video file format would give me the same video quality as the original AVI captured from my camera?Should I use mp4 or there is a better alternative since keeps crashing the program?
I just upgraded to x4 from x2. Using x4, if I render to the iphone h.264 640x480 template, rendering seems to complete normally, progress bar goes to 100%, but after that no file is created and no file plays (if autoplay is checked).
I experimented with making a custom h.264 template, and found that this always happens if audio is aac 48000. If I change to 44100, everything works.
But I'd like to be able to use 48000.
I don't know if I changed a setting or what, but now, when it renders, the CPU is rather idle?! Yet the render speeds are not bad! What?! I bought the product because it said it had GPU rendering. That is great, but I want both! Also, is there a way to see GPU usage like task manager CPU rendering? I would like to maximize utilization to minimize my rendering time. I have an NVidia 460 786MB GPU.
View 3 Replies View RelatedI have a project I'm trying to render to an mp4...I previously rendered 2 different versions of it, then after this morning when I re-edited and finished the project, it doesn't let me render an mp4.
If I try to render, it goes through the whole process and then I watch as the file disappears when rendering is complete. It let me render to an AVCHD file, but it won't let me render an mp4 from it. I tried uninstalling/reinstalling VS x4 and installing the SP but nothing works.
It's an element contained in a .vsp. Right now I'm trying to "connect" & render 1 video file + 4 .vsp (inttertitle card.mp4, segment1.vsp, ... segment4.vsp). Each contains segments that run continuously and I need to combine into just one video file (mp4 HD format). But every time the render reaches that file (above) (17% of the total render), it crashes. There's nothing else on that timeline except that mp4 file and a wav file. I don't understand why it's happening. I have done it successfully before in Youtube HD format.
Smart Proxy is enabled, but I don't see how that's relevant to rendering. I have tried re-converting the video file into versions: one has .mpeg4 codec, the other has .H264. I also downloaded & installed VSPX4 SP1, updated my codecs, drivers, downgraded Quick time. But the result is still the same as far as rendering the whole project goes: crashing at 17%.
There were enough RAM & CPU when I did the rendering so I don't think this is a hardware issue. I also tried disabling Smart Render just to see if it will react positively.
There came a time also when the render passed 17%, but it crashed when it reached 94%. Interestingly, when I rendered segment1.vsp only (to mp4 HD), it also passed 17%, but then it failed to finish also. Right now, I'm going to re-convert the file to a different format to see if the whole crash is related to mp4 (I have rendered many mp4s just last week and they were successful).
So I'm curious, is there a limit to how many "connected" .vsp files one can render successfully? And is there a certain mp4 type that VSP can't handle properly?
I have Video Studio Pro X3. I've never had a problem since I got it, but recently I've been trying to render video at 60 frames per second. I've looked everywhere online for tutorials but still don't understand how to do it. I keep getting 29.97fps in the end. I need it for a project and I need it very soon.I use MP4 video files at 60fps.
View 10 Replies View RelatedI am trying to render to DV 4:3 with video studio 4 but the finish video is missing a piece.
Video Studio 4
OS - XP
After lots of experimenting, I have finally found that Corel Video Studio Pro X4 is capable of rendering the 1080i 50i AVCHD videos off my Sony CX-190E Camcorder, without any motion blur.
All other softwares failed to remove the motion blur. Only this software could render the video, smoothly at 25 FPS (50 FPS isn't supported by my Samsung HDTV so I render at 25FPS)
So I was trying out VS Pro x4 before buying. But the only problem that keeps me away from buying the product is, Corel VS Pro X4 renders the AVCHD (1080i-50i) source files to HDV 1080i -50i (.mpg) files at 1440x1080, which plays vertically elongated (with two black borders on the sides) on my HDTV.
How can I make it render at 1920x1080?
If I select any other profile like WMV (and manually configure the profile at render at 1920x1080), motion blurring is present and noticeable. Only the .mpg HDV 1080i-50i are completely smooth and free from any motion blurring.
How can I make it render HDV 1080i-50i at 1920x1080, instead of 1440x1080?
Few months back i switched to HD from SD and then i had many problems with rendering. Finally i had selected "IPAD HD" for rendering. Thats not full hd. But i want my videos in FULL HD. What combination will be best for it?
My video's specs are:
Video
.mp4 files
1920x1080 Frame size.
Data Rate: 15055kbps
Frame rate: 29 frames/persecond
Audio
Bit Rate: 254kbps
Stereo
Audio sample rate: 48khz
What setting will be good for rendering in 1920x1080?
Video Studeo Pro X3 crashes when starting to render. This forum will not let me upload the .DMP file.
View 12 Replies View RelatedUp until recently I had been able to capture a VHS movie using the ADVC-110, edit the avi files and put in transitions, save to a vsp file. Next I would go to Share> Create Video File> Custom. Since this an old movie of only fair quality I would select a bitrate of 6000. I was previously able to render 3 different movies of approx. 70 minutes in lenghth to mpeg-2 in 1 1/2 hours each. Now it suddenly takes 6 to 8 hours per movie. The cpu will go like gangbusters and render the first 50% of the movie in just 20 minutes, and then slow down and take hours for the last 50%. I have Spy Sweeper and other running progs. and apps. shut off, screen saver disabled, internet connection off and D-Link not in use. I am using my "D" drive for all my files, which has nearly 1 TB, and I have plenty of available memory. what causes it to slow down, and what I might try? OS: XP; MB: ASUS P5QL-E; GC: NVIDIA GeForce 9500 GT; SC: Real tek High Def Audio; Processor: Intel 2 Core Duo @ 3.33 GHZ; Hard Drive: C: 300 GB, D: 1 TB; Memory: 3GB.
View 2 Replies View RelatedI'm running VSP x5 and have made a 90min film with my AVCHD 1920x1080 files. I'll be making some SD discs and HD discs. There wasn't a lot of enhancements to the footage except for several clips that needed a few filters put in. The Project Settings are MPEG Standard Definition dimensions.
When I edit my project, I always observe the Smart Proxy Queue manager, wait until everything coverts, and I get very good smooth action in editing. (probably a solution to many of the problems that needlessly occur elsewhere in the forum).
However rendering takes AGES and AGES (reached 40% after 4hrs). The box is checked "Perform Smart Render". Why is it when I've already waiting for files to be downsized when I first added the clips to the timeline....can I not take advantage of these and save time?
What else can I do to speed up render time?
Video Studeo Pro X3 crashes when starting to render. This forum will not let me upload the .DMP file.
vstudio_1.6.2.21_20130623_141428.DMP 940KB
I upgraded to X5 specifically for m2t 1980x1080 50p rendering but when it reaches between 50%-60% it stops. No error message comes up and the program doesn't shut down, just goes back to the "Share" screen.
I am currently trying to render a 23 minute slideshow containing only JPEGS, no video. After 3 tries using slightly different rendering settings each time, I tried a 13 minute video containing 50p Full HD video and that seemed to render fine. I am using a Toshiba Satellite L500 laptop but as far as i can tell it is within the minimum requirements for X5.
The last settings I used to render mt2 were:
1980x1080 @ 50 fps
PAL HDMV
Quality- 70
Video Format -MPEG-2 (also have tried H.264)
Video Data Rate - Variable 25000kbps
i bought VSP4x about a month ago to try to get back into video editing (was originally using Media Studio on my XP machine but it isn't supported on Win7) and was working fine with video acquired through the method capture -> edit - > share. but once i started bringing in videos from other sources it started going bonkers. one source i get my video from is a screen capturing program called Bandicam. it creates standard Mpeg encoded VBR AVIs. i would editing my footage cut, and snip where needed. add some text and then render. as soon as it hits 1% of rendering it will come back with a unspecified error and give me a dump files to send to tech support. i then proceed to find tech support but was unable to find any sorts on the website that wasnt going to cost me $20 just to send an email. i searched everywhere i can after that for a solution. couldnt find one.
Properties of your source files, including video, audio, image files (format, file size, where did you get it?): Program: Bandicam Files:.AVI(Mpeg encoded VRB) size:200-300MBs
What devices are involved and their mode of connection?:There are no devices.
Project Properties (important):
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
Output format (file, DVD, VCD, SVCD):Share-> upload to web-> youtube-> MP4HD 16:9
Output Properties (cogwheel in lower left of burn screen): Standard for youtube MP4 HD 16:9
PAL or NTSC: NTSC
Error Codes (if any): unspecified error code
Smart Render looks to me like a preferred option. Is there any cases that it will be better to disable it?
View 6 Replies View Related