VideoStudio :: Pro X2 Closes - 30 Fps 1280 X 720 HD Files
Apr 22, 2013
When trying to render a project file on VS Pro X2 using files from my new Immortal Video Eye Gear sunglasses. The files are in the following format:
Resolution HD 1280 x 720P
Recording Speed 30fps
Video Format H.264
Video File .MOV
I have loaded them on the timeline with no problems, but when I try to play back the project or try to produce an mpeg file to upload on YouTube using "Share - Create Video File" VS closes down with an error message. This is the first time I have used HD in VS Pro X2, and so I am not sure what option to select when using the Create Video File option...
Previously I have only ever used SD video files from my Sony Handycam, and this is the first time I have tried to produce a movie from the video sunglasses footage...perhaps I am not selecting the correct output file format (or maybe it is related to the MOV files being 30fps and not the UK standard 25fps?). The data rate for the files is approx. 6550 kbps and the Total Bitrate is 7062 kbps. Audio is mono 512 kbps (32 KHz).
Unfortunately the error message is not useful ...it just says VS had to close - no clues whatsoever.
View 2 Replies
ADVERTISEMENT
Jul 16, 2011
I have recently 'downsized' to a sanyo xacti vpc-cg100ex camera to lighten my load on holiday! this produces mpeg-4 video files which I copy straight to a folder on my laptop from the SD card.
I can put these into the vs library and tranfer them onto the timeline and add trnsitions, titles etc. however VS is closing down with increasing frequency.(same files on my old xp machine seem to work ok albeit depressingly slowly!)
I have been searching the forum and wonder if I should be converting the files to some other format before doing any editing....does that involve using the share option straight after loading the files, and if so, how?
the properties of the original file are
Type mp4 video,
1920 * 1080,
59 frames/sec, bitrate 252,
audio sample rate 48kh
the properties given for the file on the timeline are
Format Mpeg-4 file,
Vid Type H.264 Main profile video, Upper Field first,
Attributes 24bits 1920*1080 16.9
Frame rate 29.970 frames per s
Audio type MPEG AAC 48000 hz 16 bit stereo
I have not been doing any video at all for quite some time so am definately somewhat rusty.
View 4 Replies
View Related
Mar 13, 2012
My input video is from .mov files from a Canon SX-30 IS with these properties:
Video:
Attributes: 24-bit, 1280 x 720
Frame Rate: 29.970 frames/sec
Sound:
Compression: 16-bit, Little Endian
Attributes: 48 KHz, 16-bit, Stereo
I wish to record to DVD disc at same or similar quality but 720 x 480 is the best I can seem to get from VS x 4 Pro "Ultimate".
In: Settings > Preferences > Performance > Video Save Options > Frame Size - "User Defined" is not available and the highest resolution in "Standard" is 720 x 480. Where is the information I need?
View 2 Replies
View Related
Feb 23, 2012
I have a DSLR camera canon 550d,i shoot videos in pal 1280-50p and I want to know what is the best rendering settings in COREL PRO X4 to this kind of file? COREL has two options : WMV 720P and HDV 720P are they good? Or should I build a specific template file.
View 2 Replies
View Related
Nov 1, 2011
When I'm working on a project, "Corel needs to close" when I play the supplied .mpa (sound effect) files whether it be as a clip or in the project. I've downloaded the X4 update.
View 4 Replies
View Related
Oct 23, 2013
After installing Mavericks, I can no longer link files in illustrator CC as the finder window closes by itself after one second or if I click on anything. It was happening with save as also, but that seems to have rectified itself by reinstalling the program.
View 11 Replies
View Related
May 26, 2008
I've been printing for years with PS 5.5, 7, CS, & now CS3.
I've always allowed Photoshop to manage colors,; No color Management selected in Printer Driver, correct paper choice as provided by media Co., correct profile as provided by media Co., in Print Dialog.
In the past, what I saw on screen was extremely close to the printed results.
I just started printing again, with CS3, and though the prints look fine on the monitor, when viewed in CS3's Print Dialog with "Match Print Colors" / Soft Proof selected, the image not only turns much darker, but there is absolutely no hint of highlight "pop" left----Even the effect of sharpening disappears. The white borders even turn to a dull, bluish gray & the entire image assumes a dark, flat, dull appearance, and that's the way it prints!
This occurs with image files that have printed fine previously, and have not been altered in any way.
I've tried reinstalling the Printer driver,
View 2 Replies
View Related
Nov 7, 2013
I know CC definitely won't work, but I'm on a 13 inch Macbook Pro. The system requirements for CS 6 state you need 1280 x 900, but mine is 1280 x 800! Will the software be buggy and messy? Or will it run alright? Also, I have an external monitor which I can lug to work tomorrow, and that definitely has enough pixels, but I'd really prefer not to do that! Is any success with these dimensions?
View 3 Replies
View Related
Aug 12, 2009
just got a new PC with Vista, hooked my Epson 1280 printer and it works fine,however, in Photoshop print dialog the printer does not show up in the printer profile drop down menu. I downloaded the drive from Epson installed it but still no profile for the printer,
View 7 Replies
View Related
Jul 21, 2011
How do I go about converting MOV files into DV or mpeg files to edit? When I import the files are choppy I downloaded the quicktime, dvx and direct x files. No success.
View 9 Replies
View Related
Mar 24, 2012
If I save an image I'm working on, GIMP closes on me. It's merely annoying if I save as an xcf. If I forgot to do that first (I try not to, but it happens), I have only that final image, which usually isn't the only one I wanted.
Today I was cropping photos for various closeups. I copied and saved a selection I wanted to a new image and saved as a jpg, then both the old and new image closed. I then opened two photos in separate images. Cropped one, saved it and it was okay. Undid the cropping and cropped another section and saved it and Poof! Gone again along with the other photo that I had not touched, yet.
When I used GIMP in Windows it never did this. I'm now using Ubuntu and it is almost always doing this. I was under the impression that GIMP and Ubuntu worked well together. This is not what I'd call working together well.
What do I need to do to fix this problem? I have checked my settings, reset them, returned them to default, put them back to my preferences, all to no avail. Size of the image seems to make no difference as it happens to small kilo images as well as multi gig images.
View 3 Replies
View Related
Feb 9, 2009
When I run CS4, after about 5 minutes ( of non-use), it closes automatically.
It was working fine until last night.
I have Windows XP Home Edition.
View 1 Replies
View Related
Jul 16, 2012
I had to download a file from school and then animate the object we were given. I saved the file to my folders and did the animation and saved it again. When I go to render, I get "unexpected error" and the program force closes. The error report says it is "Unhandled Exception". I just did another assignment last week, and it worked fine. I've changed nothing in the program. The only real difference this time is the presence of a light source and a camera, both of which I've used in the past with no problem.
It has been a couple months since I've worked in the program, and I'm hoping it is an easy fix, just something I've forgotten to change.
View 3 Replies
View Related
May 9, 2012
Whenever I try to run an action or use batch I get an error message that Photoshop CS 5 will now close. What if anything can I do? I am running XP. There are actions in the plugins/actions folder. The actions tab contains my actions and the original ones.
View 4 Replies
View Related
Apr 28, 2013
My Photoshop Tool bar in CS 5 constantly closes on its own. I have to go very often to Window menu to re-open Tool bar.
View 1 Replies
View Related
Mar 11, 2013
I have CS5 and Photoshop opens fine. However, when I try to open a file, photoshop closes immediately. I re-installed photoshop and the same thing happens. How do I fix this?
View 7 Replies
View Related
Nov 23, 2013
Photoshop closes immediately after starting up. Lightroom and Bridge works fine
View 1 Replies
View Related
Mar 25, 2012
We have photoshop version 5.5 on one PC (XP) and VS 7.0 on another and though they are old they worked happily for years till just lately, now both fail to launch, "Adobe Photoshop has encountered a problem and needs to close" ??? What could be wrong ?
View 4 Replies
View Related
Mar 13, 2008
I have PS CS3 operating on Windows Vista Home Basic (Dell laptop). I installed CS3 about a month ago and it has worked perfectly until now. (I am NOT running the trial version). All of a sudden when I attempt to launch the program it opens and then closes within a split second. (It is not running in the task manager.) I am a photography and NEED my PS to edit photos. I'm in a crunch b/c I have wedding invitations to design and get ordered.
View 4 Replies
View Related
Jun 28, 2011
have a question about the playblast window.When I open it to preview an animation, it plays it and then closes right away. I can't control any playback. I'm following a tutorial for a 3 second animation and in order to see it in the playblast window I have to keep opening it up through the menu.
Is there a setting or something to give me more control over the playblast window and have it stay open after the sequence ends?
View 2 Replies
View Related
Dec 24, 2012
My Histogram is always gone when opening Gimp. It says "recently closed" but I never close it. I want it to stay open the way it used to.
View 2 Replies
View Related
Jul 2, 2013
When I'm editing a Symbol and "Save" AI automatically closes the Symbol and interrupts my workflow. Is there a way to prevent this "feature"?
View 1 Replies
View Related
Sep 10, 2012
I am using Photoshop CS3 on a PowerPC Mac running OS X 10.4.11. Some days ago, I attempted to run photoshop by clicking the icon on the dock.The splash screen loads fine but immediately as the splash screen loads photoshop closes automatically. I have already tried the following:
1. Rename TWAIN file by adding the ~ in front of it
2. Deleting photoshop preferences by using Command+Shift+Option .
View 40 Replies
View Related
Mar 14, 2013
I’m getting the following error message when ever I try to use Move Tool and the program gets close. “Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”Video card driver is updated.
Error event.
Faulting application name: Photoshop.exe, version: 13.0.0.0, time stamp: 0x4f61c045
Faulting module name: aticfx64.dll, version: 8.17.10.1047, time stamp: 0x4cabd6c0
Exception code: 0xc0000005
Fault offset: 0x000000000002f5bf
Faulting process id: 0x15ac
Faulting application start time: 0x01ce2110508d2fb6
Faulting application path: C:Program FilesAdobeAdobe Photoshop CS6 (64 Bit)Photoshop.exe
Faulting module path: C:Windowssystem32aticfx64.dll
Report Id: fe57fe44-8d03-11e2-bd6c-dc0ea14b01df
View 22 Replies
View Related
May 19, 2011
If I have more than one drawing open at a time, a not infrequent occurrence, when I close one drawing they all close. Before if I closed the drawing I had open, it would leave the other open for me to work on instead of having to re-open the whole CDR application all over again. I have deleted and re-installed several times and installed SP2
View 3 Replies
View Related
Mar 29, 2011
I have this consistent problem, can duplicate it.
1-create new document
2-create a simple vector shape (rectangle, circle, etc.)
3-Convert to bitmap (i used default settings)
4-Trace (I used LOGO, but I don't think it matters)
5-Undo until it's vector again.
Program closes.
View 1 Replies
View Related
Jun 25, 2012
My AutoCAD closes down when closing a drawing (yes I AM selecting the right x). It happends with larger drawings and more often in layouts.
View 2 Replies
View Related
Dec 21, 2004
(P7). All of a sudden I can't open it! It starts to load and just as it finishes the credits, it closes automatically!
I already rebooted several times.
View 1 Replies
View Related
Jun 14, 2006
When I try to create a new document or open an existing one in either ps 7 or CS, it closes. This happens everytime.
Previously they were both saying "cannot create new document because of program error" but I deleted the preferences, and now they do this...
I've re-installed CS twice now.
When I try photoshop in another account it does the "could not create a new document because of program error" message.
I have a 1.33 GHZ PowerPC G$, 512 Ram, OS X version 10.4.6
Photoshop used to work fine, and then one day randomly had the error message, and now closes when i create or open documents.
View 1 Replies
View Related
Nov 21, 2012
My GIMP 2.8. closes down immediately after exporting an image. When I overwrite it, it doesn't happen. How can I prevent GIMP from closing down after exporting images?
View 3 Replies
View Related
Aug 22, 2013
- My Revit 2014 is closing after its showing only the interface ( open 3 seconds then closed automatically )
its first time to download .
- and how I know if it haa a conflict with my NAVIDA
View 1 Replies
View Related
