VideoStudio :: Frame Size 1280 X 720?
Mar 13, 2012
My input video is from .mov files from a Canon SX-30 IS with these properties:
Video:
Attributes: 24-bit, 1280 x 720
Frame Rate: 29.970 frames/sec
Sound:
Compression: 16-bit, Little Endian
Attributes: 48 KHz, 16-bit, Stereo
I wish to record to DVD disc at same or similar quality but 720 x 480 is the best I can seem to get from VS x 4 Pro "Ultimate".
In: Settings > Preferences > Performance > Video Save Options > Frame Size - "User Defined" is not available and the highest resolution in "Standard" is 720 x 480. Where is the information I need?
View 2 Replies
ADVERTISEMENT
Apr 22, 2013
When trying to render a project file on VS Pro X2 using files from my new Immortal Video Eye Gear sunglasses. The files are in the following format:
Resolution HD 1280 x 720P
Recording Speed 30fps
Video Format H.264
Video File .MOV
I have loaded them on the timeline with no problems, but when I try to play back the project or try to produce an mpeg file to upload on YouTube using "Share - Create Video File" VS closes down with an error message. This is the first time I have used HD in VS Pro X2, and so I am not sure what option to select when using the Create Video File option...
Previously I have only ever used SD video files from my Sony Handycam, and this is the first time I have tried to produce a movie from the video sunglasses footage...perhaps I am not selecting the correct output file format (or maybe it is related to the MOV files being 30fps and not the UK standard 25fps?). The data rate for the files is approx. 6550 kbps and the Total Bitrate is 7062 kbps. Audio is mono 512 kbps (32 KHz).
Unfortunately the error message is not useful ...it just says VS had to close - no clues whatsoever.
View 2 Replies
View Related
Feb 23, 2012
I have a DSLR camera canon 550d,i shoot videos in pal 1280-50p and I want to know what is the best rendering settings in COREL PRO X4 to this kind of file? COREL has two options : WMV 720P and HDV 720P are they good? Or should I build a specific template file.
View 2 Replies
View Related
Feb 11, 2013
Using VS4. The largest frame size for MPG4 output is 720zx576. I cannot specify custom frame size as the area is not available (dimmed out). what gives? I want to try and move from WMV at 12870x720 but the frame size for MPG4 is not customizable.
View 2 Replies
View Related
Apr 6, 2011
I would like my DVD output to fill more of my (be larger) TV screen. I am copying VHS tapes to DVD using Sony DvDirect. The DVD files are then imported into Video Studio Pro 4, edited, and then output to DVD. The input and output is 4:3 and frame size is 720 x 480. I can't set this to a larger frame size using any of the tools I've found. Is it the frame size I want to increase?
View 10 Replies
View Related
Mar 31, 2011
I have edited an mp4 video whose original frame size is 512x384. When I go to Share this edited mp4 video, I select the Create Video File option and then I select "Same as First Video Clip." I then get the following error message:
"The frame size (512x384) of the video file does not match the settings and therefore cannot be trimmed."
Why am I getting this error? How can the edited video not match its own frame size?
View 7 Replies
View Related
Jun 12, 2011
1.I am using the latest version of videostudio which I upgraded today today June 11, 2011.
2.I am using a Sanyo Video Camcorder PD2, which I am recording in 1280 x 720 29.97 frames per second.
3.I’ve imported the video, into the program, and I am simply trying to “join” the video by using step three that is “Share.”
4.I am clicking option “create video file” and then the option “same as first video clip” because I would like to preserve the same video settings. There are other ways I could join the clips, but these ways do not preserve the video settings. So when I choose “same as first video clip I get my error message “The frame size of the video (1280 x 720) does not match the settings and therefore cannot be trimmed.’
View 4 Replies
View Related
Jun 4, 2011
Why is it that you can't activate the user defined frame size when trying to define a custom movie template or edit an existing one on the fly during a file save operation?
Template Options_MPEG.jpg (39.38 KiB) Viewed 1308 times
View 7 Replies
View Related
Oct 8, 2011
I thought the best way to construct my video would be to 'cut' out all the sections of video I wanted to use, and save them in the library. When I had them all, I could then bring them down to the timeline where each needed to go. The videos I am working from are 512x288, and when I try to use the 'save trimmed video' function, it comes back saying my frame size is not per the settings.
I haven't seen a way to make the project accept a different frame size, that option is grayed out under preferences. Is there a way for me to cut out the sections I want and save them individually?
View 4 Replies
View Related
Jul 23, 2013
I have VideoStudio SE, packaged with Sabrent USB-AVCPT cables. I was able to capture video for a while. Now when I try I get the following message. "Capture video bit rate is 300. Frame size is 640 X 480. When using this frame size the video bit rate should be between 1578 - 8838."
View 5 Replies
View Related
Sep 13, 2012
I upgraded from VS 12 into VS Pro X5 Ultimate a while ago and now I have some issues in editing some old footage taken with Sony H9 camera. This camera makes 640*480 30 frames/s Mpeg-1 video files.
After editing the movie, I would like to export it into 640*480 30 frames/s Mpeg-2 file as I used to be able to do with VS 12 (in the old Win-XP machine, current one is Win-7 64-bit). Now however, the VS X5 does not give me the option in 'Create Video File' to set 'User-defined' frame size.
It only lists under MPEG-files -> Options: standard 720 x 576 (yes I am on PAL region) and 25 frames/s. Why is this? The only encoder shown is 'Ulead MPEG.Now Encoder'. Maybe I had some other encoder available in the Win-XP machine?
I have been searching for Win-7 MPEG-2 encoder, but no luck.
How to get user-defined frame-size and rates under MPEG-2 encoder in VS PRO X5 ???
View 8 Replies
View Related
Oct 21, 2007
I have some video in mpg format I'm trying to split into scenes, and then save off a separate videos. When I try to save one of the trimmed scenes using "Save trimmed video," I get the error: "Unable to compress video with the specific frame rate or frame size." It's all set in 16:9, and it's all set to 29fps, etc.
View 4 Replies
View Related
May 26, 2008
I've been printing for years with PS 5.5, 7, CS, & now CS3.
I've always allowed Photoshop to manage colors,; No color Management selected in Printer Driver, correct paper choice as provided by media Co., correct profile as provided by media Co., in Print Dialog.
In the past, what I saw on screen was extremely close to the printed results.
I just started printing again, with CS3, and though the prints look fine on the monitor, when viewed in CS3's Print Dialog with "Match Print Colors" / Soft Proof selected, the image not only turns much darker, but there is absolutely no hint of highlight "pop" left----Even the effect of sharpening disappears. The white borders even turn to a dull, bluish gray & the entire image assumes a dark, flat, dull appearance, and that's the way it prints!
This occurs with image files that have printed fine previously, and have not been altered in any way.
I've tried reinstalling the Printer driver,
View 2 Replies
View Related
Nov 7, 2013
I know CC definitely won't work, but I'm on a 13 inch Macbook Pro. The system requirements for CS 6 state you need 1280 x 900, but mine is 1280 x 800! Will the software be buggy and messy? Or will it run alright? Also, I have an external monitor which I can lug to work tomorrow, and that definitely has enough pixels, but I'd really prefer not to do that! Is any success with these dimensions?
View 3 Replies
View Related
Aug 12, 2009
just got a new PC with Vista, hooked my Epson 1280 printer and it works fine,however, in Photoshop print dialog the printer does not show up in the printer profile drop down menu. I downloaded the drive from Epson installed it but still no profile for the printer,
View 7 Replies
View Related
Apr 17, 2012
When I make a frame, with framegerator the size (80 x 80 x 2) is placed in QTY field, i want to have 1 in quantity and then I place the dimension =<G_H> x <G_W> <G_L> in my own dimension field ! how can I change it, so i don't have 80x80x3 in the quantity field ?
When I make a custom change in a field, is there a way to "go back" to hov the BOM/PARTLIST looked before custom change ?
View 1 Replies
View Related
Mar 11, 2014
I would like to control the actual picture frame size when making a Book in Lightroom 5. Or else know the sizes of the different picture frames provided by choosing the different page layouts. That way I can either change the picture frame dimensions to accomodate each photo or change the image size to fit in the offered picture frame. I find that using the software as is winds up cropping the images in unwanted ways. Modifying the picture frame would be my preferred alternative.
View 14 Replies
View Related
Jul 25, 2012
I am trying to create a video file for the 1st time with VS X5.The project is 27 mins long and includes jpeg images and avi
clips that I have used successfully with VS11+, and film that I have taken with my camera which I have been using for years.It is not HD and I intended to burn a standard DVD.However, at 99% of rendering a message showed saying "Frame 329 is unreadable".I pressed ok.Nothing is showing in the folder that it was hopefully being saved to .Lwr field 1st-DVD PAL-7000 video data rate-384 audio data rate-save as mpeg files -----all properties I have used before with no problem.My only change is now to use 16.9 aspect ratio.
View 14 Replies
View Related
Nov 27, 2011
In Corel Video Studio Pro x3 - Is there anyway to save a single chosen frame as a .jpg file or some other editable picture format?
View 4 Replies
View Related
Feb 1, 2012
I'm editing MTS files and its H264 video type with a frame rate of 29.970/sec, I'm getting a error that I'm sure you have heard about before, but I can't seem to find the solution. I receive an error stating,'' 914 frame is unreadable'', so if I divided 914 by 29.970 ,shouldn't that give me the second that I have to check for a frame error?
View 1 Replies
View Related
Mar 30, 2011
I am doing a menu for a client and it seems that every time I put a specific font size such as 10pt. in a text frame..it changes to a size 11.3245pt. every time I open the file back up to work on it again.
How do I prevent this? Or is there something I am doing wrong in the text frame?
View 14 Replies
View Related
Aug 24, 2012
When I start a new project, it give me no frame rate option, beside what i see in the .cfg folder. How to i set a frame rate of 29 but with a custom resolution size ?
View 1 Replies
View Related
Feb 4, 2012
Wondering if it is possible to change the default Frame that is used for displaying thumbnail chapters when I create my Menu for Blu-ray authoring The existing Frame that has the Polaroid /postcard look with a paperclip, etc
If so, how does one replace this frame?
Frame.jpg (5.89 KiB) Viewed 299 times
View 4 Replies
View Related
Feb 21, 2013
I have an MP3 sound file which I'd like to put on Vimeo.
I think you have to do this as a video, so my idea is to use it as a soundtrack for a video that has just one constant frame as the image.
I can add a single frame to the timeline and add the sound obviously but how do I make that one frame be the single image of the whole video (which is about four minutes long)?
View 2 Replies
View Related
Feb 23, 2011
With the release of VS X4, I have a question concerning frame rates;
Does corel (X4) now support import/export of 60fps (2D) video, various formats?
As this would be a fundamental requirement of purchase for me.
View 14 Replies
View Related
Jun 8, 2011
Is it all possible to show video in a picture frame, then over lapping with a person standing in front?
If so would there be a guide to able to do such a thing?
View 2 Replies
View Related
Oct 6, 2011
I am using Corel videostudio pro x4 I have lot of frames in my video. I need to make each frame to pause before the anther frame starts. When i adjust the speed of frames audio is affecting.
View 2 Replies
View Related
Oct 27, 2013
how to choose a frame to match existing photo size
View 1 Replies
View Related
Jun 20, 2012
I'm using the HQ 4:3 template in VS11+ but noticed it's defaulting to frame based. My clips are mpeg's BFF. Shouldn't this template be switched to bottom field first?
View 2 Replies
View Related
Apr 15, 2011
Why I cannot render a frame-based video when selecting (Share/Custom/MPEG Transport-stream)? My goal is to create an AVCHD video and burn it to a DVD (4.7G). My video is 16min long and the calculated bitrate is around CBR 15,000 kbps. If I use the (Share/ADVCHD/1920) option, I don't have any control over the settings. I have already deinterlaced my video using Neoscene. That is why I want to create a frame-based video.
Below is my workflow.
Two video sources:
.mov(1080p) from ContourHD 1080p camea
.mts(1080i) from Canon Vixia HF S100
1. Trim .mts files in CSV PX3
2. Trim .mov files in Contour S/W
3. Convert trimmed clips to .avi with Cineform Neoscene
4. Edit in CSV PX3
5. Planned to render in AVCHD, 1920x1080p, 29.97 fps, 15000 kbps
View 5 Replies
View Related
Aug 24, 2013
Two quick questions:
How do I capture a screen, or frame and how do I get to the help files?
View 4 Replies
View Related
