I have edited an mp4 video whose original frame size is 512x384. When I go to Share this edited mp4 video, I select the Create Video File option and then I select "Same as First Video Clip." I then get the following error message:
"The frame size (512x384) of the video file does not match the settings and therefore cannot be trimmed."
Why am I getting this error? How can the edited video not match its own frame size?
Using VS4. The largest frame size for MPG4 output is 720zx576. I cannot specify custom frame size as the area is not available (dimmed out). what gives? I want to try and move from WMV at 12870x720 but the frame size for MPG4 is not customizable.
View 2 Replies View RelatedMy input video is from .mov files from a Canon SX-30 IS with these properties:
Video:
Attributes: 24-bit, 1280 x 720
Frame Rate: 29.970 frames/sec
Sound:
Compression: 16-bit, Little Endian
Attributes: 48 KHz, 16-bit, Stereo
I wish to record to DVD disc at same or similar quality but 720 x 480 is the best I can seem to get from VS x 4 Pro "Ultimate".
In: Settings > Preferences > Performance > Video Save Options > Frame Size - "User Defined" is not available and the highest resolution in "Standard" is 720 x 480. Where is the information I need?
I would like my DVD output to fill more of my (be larger) TV screen. I am copying VHS tapes to DVD using Sony DvDirect. The DVD files are then imported into Video Studio Pro 4, edited, and then output to DVD. The input and output is 4:3 and frame size is 720 x 480. I can't set this to a larger frame size using any of the tools I've found. Is it the frame size I want to increase?
View 10 Replies View Related1.I am using the latest version of videostudio which I upgraded today today June 11, 2011.
2.I am using a Sanyo Video Camcorder PD2, which I am recording in 1280 x 720 29.97 frames per second.
3.I’ve imported the video, into the program, and I am simply trying to “join” the video by using step three that is “Share.”
4.I am clicking option “create video file” and then the option “same as first video clip” because I would like to preserve the same video settings. There are other ways I could join the clips, but these ways do not preserve the video settings. So when I choose “same as first video clip I get my error message “The frame size of the video (1280 x 720) does not match the settings and therefore cannot be trimmed.’
Why is it that you can't activate the user defined frame size when trying to define a custom movie template or edit an existing one on the fly during a file save operation?
Template Options_MPEG.jpg (39.38 KiB) Viewed 1308 times
I thought the best way to construct my video would be to 'cut' out all the sections of video I wanted to use, and save them in the library. When I had them all, I could then bring them down to the timeline where each needed to go. The videos I am working from are 512x288, and when I try to use the 'save trimmed video' function, it comes back saying my frame size is not per the settings.
I haven't seen a way to make the project accept a different frame size, that option is grayed out under preferences. Is there a way for me to cut out the sections I want and save them individually?
I have VideoStudio SE, packaged with Sabrent USB-AVCPT cables. I was able to capture video for a while. Now when I try I get the following message. "Capture video bit rate is 300. Frame size is 640 X 480. When using this frame size the video bit rate should be between 1578 - 8838."
View 5 Replies View RelatedI upgraded from VS 12 into VS Pro X5 Ultimate a while ago and now I have some issues in editing some old footage taken with Sony H9 camera. This camera makes 640*480 30 frames/s Mpeg-1 video files.
After editing the movie, I would like to export it into 640*480 30 frames/s Mpeg-2 file as I used to be able to do with VS 12 (in the old Win-XP machine, current one is Win-7 64-bit). Now however, the VS X5 does not give me the option in 'Create Video File' to set 'User-defined' frame size.
It only lists under MPEG-files -> Options: standard 720 x 576 (yes I am on PAL region) and 25 frames/s. Why is this? The only encoder shown is 'Ulead MPEG.Now Encoder'. Maybe I had some other encoder available in the Win-XP machine?
I have been searching for Win-7 MPEG-2 encoder, but no luck.
How to get user-defined frame-size and rates under MPEG-2 encoder in VS PRO X5 ???
I have some video in mpg format I'm trying to split into scenes, and then save off a separate videos. When I try to save one of the trimmed scenes using "Save trimmed video," I get the error: "Unable to compress video with the specific frame rate or frame size." It's all set in 16:9, and it's all set to 29fps, etc.
View 4 Replies View RelatedI'm getting this message when trying to output a QT movie from SAP2 SP3.
No problems rendering tiff's et al but I need QTs.
Problem goes away for a while after a hardware restart. Cannot seem to pinpoint the source of this.
MacPro Early 2008, 32GB RAM, QuadroFX4800, OSX 10.8.2
When I make a frame, with framegerator the size (80 x 80 x 2) is placed in QTY field, i want to have 1 in quantity and then I place the dimension =<G_H> x <G_W> <G_L> in my own dimension field ! how can I change it, so i don't have 80x80x3 in the quantity field ?
When I make a custom change in a field, is there a way to "go back" to hov the BOM/PARTLIST looked before custom change ?
I just recently had Inventor 2012 installed on my computer and I went to make a frame generator and an error message popped up and won't let me make the generator. I attached a .jpeg to this that shows what error keeps appearing.
View 3 Replies View RelatedI am getting this error on all of my Vista 64 systems running Autocad Map 2008 ("fixed" to run on 64 bit):
Error: Cannot Open Frame File .AcMapCoordinateTransform.cpp
I have found some info here showing the same problem on a 32 bit machine:
[URL]
The problem is I don't know how to set my machine to NOT use the 3G switch, as this is Vista x64 not XP x32.
I have tried this with multiple machines and fresh builds.
I had my Mac crash on me a few days ago and since then I've been only able to work on my current project for ten minutes at a time before I get the above dialogue come up.
It's not just this file that suffers from this and there doesn't appear to be a pattern to which file is affected. The files that are mentioned in the dialogue are outputs from both FCP and from AE itself, they are always Quicktimes and they are compressed with the Animation codec, although I've used a number of other codecs and it doesn't seem to make any difference. If I quit and restart AE, I can continue working for a while on a composition with the same file that caused the dialogue to appear, until it happens again, often with a different file mentioned in the dialogue.
We have re-installed the CC suite after an uninstall and clean-up, but to no avail.
Do we need to reinstall the OS? Could it be a quicktime thing?
I would like to control the actual picture frame size when making a Book in Lightroom 5. Or else know the sizes of the different picture frames provided by choosing the different page layouts. That way I can either change the picture frame dimensions to accomodate each photo or change the image size to fit in the offered picture frame. I find that using the software as is winds up cropping the images in unwanted ways. Modifying the picture frame would be my preferred alternative.
View 14 Replies View RelatedI am trying to create a video file for the 1st time with VS X5.The project is 27 mins long and includes jpeg images and avi
clips that I have used successfully with VS11+, and film that I have taken with my camera which I have been using for years.It is not HD and I intended to burn a standard DVD.However, at 99% of rendering a message showed saying "Frame 329 is unreadable".I pressed ok.Nothing is showing in the folder that it was hopefully being saved to .Lwr field 1st-DVD PAL-7000 video data rate-384 audio data rate-save as mpeg files -----all properties I have used before with no problem.My only change is now to use 16.9 aspect ratio.
In Corel Video Studio Pro x3 - Is there anyway to save a single chosen frame as a .jpg file or some other editable picture format?
View 4 Replies View RelatedI'm editing MTS files and its H264 video type with a frame rate of 29.970/sec, I'm getting a error that I'm sure you have heard about before, but I can't seem to find the solution. I receive an error stating,'' 914 frame is unreadable'', so if I divided 914 by 29.970 ,shouldn't that give me the second that I have to check for a frame error?
View 1 Replies View RelatedI am doing a menu for a client and it seems that every time I put a specific font size such as 10pt. in a text frame..it changes to a size 11.3245pt. every time I open the file back up to work on it again.
How do I prevent this? Or is there something I am doing wrong in the text frame?
When I start a new project, it give me no frame rate option, beside what i see in the .cfg folder. How to i set a frame rate of 29 but with a custom resolution size ?
View 1 Replies View RelatedAt my company we have a custom CC library with custom profiles for use in frage generator. We are having a problem with one of the frames. Everything goes well when the profiles is inserted.
But when I try to "trim to frame" the intersections of two profiles, it does not trim them correctly. It trims them in a 45 degree angle. As you can see on the attached jpg file.I tried everything. Checked the sketch, deleted the profile, republished the part.
I am having performance problems with constraining a FG assembly. I have a simple frame, (cube form). When I am trying to constrain some brakets to the frame (or anything else) and click apply, Inventor freezes and I have to wait about 2 mins.
The same when I try to insert new frame members
Inventor 2012
Win 7 64-bit
Dell Precision T5400
Intel Xeon 2,5 GHz
8 Gb RAM
NVIDIA Quadro Fx 3700
I'm with a problem here, that when i try to change a material from a frame member, i got the error below:
[WARNING] Frame Generator: Errors occurred while attempting to change frame member(s).
[WARNING] Problems occurred during changing Frame Member(s)
[ERROR] A change could not be completed. The reason for the failure is unknown. Please retry.
The structure that i'm trying to change, was created in IV 2012 SP1, and now I'm editing it in IV 2013.
All the pieces of this project were converted to the new version, and the only big difference from 2012 in this case i think that is the materials library, that I created a new one and set on project as default.
The strange, is that if I enter frame by frame and go to iProperties>Physicals, there i can change the material normally (but with a big wate of time ofc).
I keep getting Instability of node errors in my Frame Generator. Specifically type 3 at node 62 in direction RY. I am new to FG results seem reasonable just can't get past this error. I tried deleting the member and inserting a new one in its place. The error then goes to another node?
The application is a steel box frame being lifted by a crane, FWIW. when you create special parts for FG and post them from Iparts, where do they go? I need to go back in and alter some properties.
Inventor 2011 Pro 64 bit
Windows XP Pro 64 bit
Dell Precision PWS390
Intel Core 2 CPU 6700 @2.66GHz
7.93 GHz Ram
ATI FireGL V7200
I had Autodesk Inventor 2011 installed for a while, and then installed some other programs (3DS, Maya and Showcase). This caused all of my add-ins to disappear from Inventor. I managed to get them back, but now when I click the 'Insert Frame' button, I get the followin gerror: [WARNING] Problems encountered while executing frame insert command. [ERROR] Failed to read data from Content Center. [ERROR] Content Center server query failed. check your Content Center configuration to make sure all required libraries are present or check Content Center connectivity to server. I've reinstalled Inventor and reinstalled the content center libraries and the error message is still there. The content center configuration in Application Options seems fine.
View 8 Replies View RelatedI cannot Export QuickTime any Codec ( h264 / 444 / 442 / mp4 / PNG / Jpeg )in Smoke for Mac 2012 SAP1 - Export Media.
I can export it before but not today.I get "Error Get Frame 0" - What Does is mean ? and What is the cause ?
I try to reinstall backburner(2012.1) and mio (2012.1) not work.So i can export in sequence format like DPX / Jpeg that useless.
Just Download Utility with same version of your Smoke and Reinstall : Wiretap Gateway/Wiretap Central/MIO and BackBurner.
Wondering if it is possible to change the default Frame that is used for displaying thumbnail chapters when I create my Menu for Blu-ray authoring The existing Frame that has the Polaroid /postcard look with a paperclip, etc
If so, how does one replace this frame?
Frame.jpg (5.89 KiB) Viewed 299 times
I have an MP3 sound file which I'd like to put on Vimeo.
I think you have to do this as a video, so my idea is to use it as a soundtrack for a video that has just one constant frame as the image.
I can add a single frame to the timeline and add the sound obviously but how do I make that one frame be the single image of the whole video (which is about four minutes long)?
With the release of VS X4, I have a question concerning frame rates;
Does corel (X4) now support import/export of 60fps (2D) video, various formats?
As this would be a fundamental requirement of purchase for me.
Is it all possible to show video in a picture frame, then over lapping with a person standing in front?
If so would there be a guide to able to do such a thing?