Using VS4. The largest frame size for MPG4 output is 720zx576. I cannot specify custom frame size as the area is not available (dimmed out). what gives? I want to try and move from WMV at 12870x720 but the frame size for MPG4 is not customizable.
View 2 RepliesI have VideoStudio XS4 Pro and it freezes when I try to edit a MPG4 video. The source video is from the Flip video player. I have been able to edit these without any problems before. This time when I put the video in the edit window I can start to play it, but then the UI stops working. It beeps when I try to press any button.
I'm using Windows 7. (see my machine profile) I have applied latest updates.
Project properties:
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
At this point the software is unusable.
My input video is from .mov files from a Canon SX-30 IS with these properties:
Video:
Attributes: 24-bit, 1280 x 720
Frame Rate: 29.970 frames/sec
Sound:
Compression: 16-bit, Little Endian
Attributes: 48 KHz, 16-bit, Stereo
I wish to record to DVD disc at same or similar quality but 720 x 480 is the best I can seem to get from VS x 4 Pro "Ultimate".
In: Settings > Preferences > Performance > Video Save Options > Frame Size - "User Defined" is not available and the highest resolution in "Standard" is 720 x 480. Where is the information I need?
I would like my DVD output to fill more of my (be larger) TV screen. I am copying VHS tapes to DVD using Sony DvDirect. The DVD files are then imported into Video Studio Pro 4, edited, and then output to DVD. The input and output is 4:3 and frame size is 720 x 480. I can't set this to a larger frame size using any of the tools I've found. Is it the frame size I want to increase?
View 10 Replies View RelatedI have edited an mp4 video whose original frame size is 512x384. When I go to Share this edited mp4 video, I select the Create Video File option and then I select "Same as First Video Clip." I then get the following error message:
"The frame size (512x384) of the video file does not match the settings and therefore cannot be trimmed."
Why am I getting this error? How can the edited video not match its own frame size?
1.I am using the latest version of videostudio which I upgraded today today June 11, 2011.
2.I am using a Sanyo Video Camcorder PD2, which I am recording in 1280 x 720 29.97 frames per second.
3.I’ve imported the video, into the program, and I am simply trying to “join” the video by using step three that is “Share.”
4.I am clicking option “create video file” and then the option “same as first video clip” because I would like to preserve the same video settings. There are other ways I could join the clips, but these ways do not preserve the video settings. So when I choose “same as first video clip I get my error message “The frame size of the video (1280 x 720) does not match the settings and therefore cannot be trimmed.’
Why is it that you can't activate the user defined frame size when trying to define a custom movie template or edit an existing one on the fly during a file save operation?
Template Options_MPEG.jpg (39.38 KiB) Viewed 1308 times
I thought the best way to construct my video would be to 'cut' out all the sections of video I wanted to use, and save them in the library. When I had them all, I could then bring them down to the timeline where each needed to go. The videos I am working from are 512x288, and when I try to use the 'save trimmed video' function, it comes back saying my frame size is not per the settings.
I haven't seen a way to make the project accept a different frame size, that option is grayed out under preferences. Is there a way for me to cut out the sections I want and save them individually?
I have VideoStudio SE, packaged with Sabrent USB-AVCPT cables. I was able to capture video for a while. Now when I try I get the following message. "Capture video bit rate is 300. Frame size is 640 X 480. When using this frame size the video bit rate should be between 1578 - 8838."
View 5 Replies View RelatedI upgraded from VS 12 into VS Pro X5 Ultimate a while ago and now I have some issues in editing some old footage taken with Sony H9 camera. This camera makes 640*480 30 frames/s Mpeg-1 video files.
After editing the movie, I would like to export it into 640*480 30 frames/s Mpeg-2 file as I used to be able to do with VS 12 (in the old Win-XP machine, current one is Win-7 64-bit). Now however, the VS X5 does not give me the option in 'Create Video File' to set 'User-defined' frame size.
It only lists under MPEG-files -> Options: standard 720 x 576 (yes I am on PAL region) and 25 frames/s. Why is this? The only encoder shown is 'Ulead MPEG.Now Encoder'. Maybe I had some other encoder available in the Win-XP machine?
I have been searching for Win-7 MPEG-2 encoder, but no luck.
How to get user-defined frame-size and rates under MPEG-2 encoder in VS PRO X5 ???
I have some video in mpg format I'm trying to split into scenes, and then save off a separate videos. When I try to save one of the trimmed scenes using "Save trimmed video," I get the error: "Unable to compress video with the specific frame rate or frame size." It's all set in 16:9, and it's all set to 29fps, etc.
View 4 Replies View RelatedWhen I make a frame, with framegerator the size (80 x 80 x 2) is placed in QTY field, i want to have 1 in quantity and then I place the dimension =<G_H> x <G_W> <G_L> in my own dimension field ! how can I change it, so i don't have 80x80x3 in the quantity field ?
When I make a custom change in a field, is there a way to "go back" to hov the BOM/PARTLIST looked before custom change ?
I would like to control the actual picture frame size when making a Book in Lightroom 5. Or else know the sizes of the different picture frames provided by choosing the different page layouts. That way I can either change the picture frame dimensions to accomodate each photo or change the image size to fit in the offered picture frame. I find that using the software as is winds up cropping the images in unwanted ways. Modifying the picture frame would be my preferred alternative.
View 14 Replies View RelatedI am trying to create a video file for the 1st time with VS X5.The project is 27 mins long and includes jpeg images and avi
clips that I have used successfully with VS11+, and film that I have taken with my camera which I have been using for years.It is not HD and I intended to burn a standard DVD.However, at 99% of rendering a message showed saying "Frame 329 is unreadable".I pressed ok.Nothing is showing in the folder that it was hopefully being saved to .Lwr field 1st-DVD PAL-7000 video data rate-384 audio data rate-save as mpeg files -----all properties I have used before with no problem.My only change is now to use 16.9 aspect ratio.
In Corel Video Studio Pro x3 - Is there anyway to save a single chosen frame as a .jpg file or some other editable picture format?
View 4 Replies View RelatedI'm editing MTS files and its H264 video type with a frame rate of 29.970/sec, I'm getting a error that I'm sure you have heard about before, but I can't seem to find the solution. I receive an error stating,'' 914 frame is unreadable'', so if I divided 914 by 29.970 ,shouldn't that give me the second that I have to check for a frame error?
View 1 Replies View RelatedI am doing a menu for a client and it seems that every time I put a specific font size such as 10pt. in a text frame..it changes to a size 11.3245pt. every time I open the file back up to work on it again.
How do I prevent this? Or is there something I am doing wrong in the text frame?
When I start a new project, it give me no frame rate option, beside what i see in the .cfg folder. How to i set a frame rate of 29 but with a custom resolution size ?
View 1 Replies View RelatedWondering if it is possible to change the default Frame that is used for displaying thumbnail chapters when I create my Menu for Blu-ray authoring The existing Frame that has the Polaroid /postcard look with a paperclip, etc
If so, how does one replace this frame?
Frame.jpg (5.89 KiB) Viewed 299 times
I have an MP3 sound file which I'd like to put on Vimeo.
I think you have to do this as a video, so my idea is to use it as a soundtrack for a video that has just one constant frame as the image.
I can add a single frame to the timeline and add the sound obviously but how do I make that one frame be the single image of the whole video (which is about four minutes long)?
With the release of VS X4, I have a question concerning frame rates;
Does corel (X4) now support import/export of 60fps (2D) video, various formats?
As this would be a fundamental requirement of purchase for me.
Is it all possible to show video in a picture frame, then over lapping with a person standing in front?
If so would there be a guide to able to do such a thing?
I am using Corel videostudio pro x4 I have lot of frames in my video. I need to make each frame to pause before the anther frame starts. When i adjust the speed of frames audio is affecting.
View 2 Replies View Relatedhow to choose a frame to match existing photo size
View 1 Replies View RelatedI'm using the HQ 4:3 template in VS11+ but noticed it's defaulting to frame based. My clips are mpeg's BFF. Shouldn't this template be switched to bottom field first?
View 2 Replies View RelatedWhy I cannot render a frame-based video when selecting (Share/Custom/MPEG Transport-stream)? My goal is to create an AVCHD video and burn it to a DVD (4.7G). My video is 16min long and the calculated bitrate is around CBR 15,000 kbps. If I use the (Share/ADVCHD/1920) option, I don't have any control over the settings. I have already deinterlaced my video using Neoscene. That is why I want to create a frame-based video.
Below is my workflow.
Two video sources:
.mov(1080p) from ContourHD 1080p camea
.mts(1080i) from Canon Vixia HF S100
1. Trim .mts files in CSV PX3
2. Trim .mov files in Contour S/W
3. Convert trimmed clips to .avi with Cineform Neoscene
4. Edit in CSV PX3
5. Planned to render in AVCHD, 1920x1080p, 29.97 fps, 15000 kbps
Two quick questions:
How do I capture a screen, or frame and how do I get to the help files?
When you are burning HD footage (video type H.264, Upper Field First) to a DVD, do I keep the project input and output on UPPER FIELD FIRST? Or am I supposed to change both to FRAME BASED?
This is what I know:
SD is Lower Field First
HD is Upper Field First
"Still Photos" is Frame based
I had a videographer tell me today that to burn HD to a DVD i'm supposed to use FRAME BASED. And HD to a BLUE RAY disc is UPPER FIELD FIRST. I thought Frame Based was only for Slideshows.
I'm currently using Corel VideoStudio Pro X4 Ultimate
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: 8000 kbps
Audio data rate: 128 kbps
Dolby Digital Audio, 48 KHz, 2/0(L,R)
I am using VS ProX5. While capturing the video captures normally for a few seconds and then stucks and moves slowly with one or two frames per second and the audio is very choppy.
Other video clips in my PC plays OK in VS.
I am capturing from my Panasonic digital camera through firewire cable/port to my Windows XP PC.
It used to work properly and for the past few months it is giving problem and I left it from there.
I get this strange thing when editing clips in VS x3 - each clip has 3 frames the same at the beginning. It's a real pain, as it mean I have to cut each clip at the start. I always assumed it was something to do with the footage from my Canon HG20 camcorder. It's a HDD camcorder, and though I don't shoot in HD (I shoot in SP - 7 sbps), I never used to get the problem when editing mini DV clips. I recently downloaded the Pinnacle Studio 15 trial, however, and noticed that it didn't happen in that editor. I prefer VS X3, and also like the trial of VSX4, though the problem persists in that version, as well.
View 4 Replies View RelatedI shot some clips on my sony cyber shot camera (its about 2 years old so the content is not in HD). the clips are in .mpg format
i'm using the trial version for corel videopro x3 -. when i try to trim the clip, the output is not as good as the original clip. Why would this be ?
i selected the "same as project settings" option when creating the file. is there some other option i should choose ?
or is this because i'm using a trial version ?
i used to edit my clips in windows movie maker and it irrespective of whatever editing i would do, the clip quality would be exactly the same as that of the source clip.