I am doing a menu for a client and it seems that every time I put a specific font size such as 10pt. in a text frame..it changes to a size 11.3245pt. every time I open the file back up to work on it again.
How do I prevent this? Or is there something I am doing wrong in the text frame?
I would like to know the default font height setting in coreldraw 12. I want font size in millimeter rather than pt.
View 1 Replies View RelatedI can't get the box to pop up where I can set the default size because I think I checked the box to not show it again. How to get it back?
View 4 Replies View RelatedI'm trying to set my default font size, Helvetica (Type 1) to 12 point. It keeps reverting back to 24 point.
I have to use Type 1 Helvetica and not that new "Helvetica Neuel T 55 Roman" because of standards for a magazine I work on. I though Open Type Helvetica (the real Helvetica) was included with CorelDRAW X6.
I was wondering on font size, in the font list size I put in 1.5 inches in the object size box its 1.146. I was doing stencils for an officer (Army) to mark his clothing for a school and he called me on it. Is there someway to change to actual size or do i need to just deal with it .
View 4 Replies View RelatedIs there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
Is there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
Page No. font size change when save a cdr file from corel x6 to x5
see images
Download this image here [URL] ..........
How can I change the default point size of the numbers that the dimensioning tool generates? Right now it is defaulted at 24 pt. and i have to manually select and change to 10 pt all through my drawings.
View 2 Replies View Relatedthe thing is that on my previous version of Corel Draw (9? 10? whatever...) I could take a text frame with tabs lined up, copy it, paste it into a new document and all the tabs would be carried over from the original.
but when I try to do that in X3, it just copies across as plain text, meaning that I would have to do all the tabbing again.
When I say the tabs were set up, it's a list that looks like this:
Bill.................32..................Harvard
John..............27..................Oxford
where the .............. is made just by tabbing across.
I converted a DXF file to a Corel Designer file. This DXF file also has some dimensions which turned into paragraph text. This paragraph text is turned by 90 degrees. The font size is rather small, so I increased it by some points. As the paragraph text frames were now too small, I tried to increase their size. However, the text frames always jump back to their original size.
I experimented a little bit and noticed that this is only, if the text is turned by 90 or 270 degrees. If the text frame is not turned or turned by 180 degrees, you can change the size of the text frame. Additionally this problem arises only, if the option "Expand and shrink paragraph text frames to fit text" is activated (in Tools | Options | Workspace | Text). Sometimes some text frames were adapted automatically, when I changed this option. However, I do not know when which text frame was changed.
Corel Designer X6, service pack 1
We are trying to convert some text to a Hindi font a translator sent us. It is installed correctly on PC and shows up in Corel X5. When you convert it, it says it is the correct font in object mangar but appears a row of boxes? The font is Kruti Dev 010.
I attached an screen shot of this.
7737.Hindi Font Issue.pdf
when I try to change the font in corel draw x4, the text disappears, this happens with new documents, old documents etc.
It works in Photo Paint, but for some reason draw has stopped working. I restarted and tried everything I could think of!!! This seemed to happen after the latest windows 7 update.
Also on a sidenote is it possible to get rid of the ads when i start up Draw and PP x4? It keeps hassling me to upgrade. It is really really annoying... seriously I bought this product, why does it have pop up ads???
How would I go about changing the font of a text through all pages? I've used Find/Replace tool but it stops on one page.
View 9 Replies View RelatedEnter 2-3 lines of text either artistic text or paragraph text. Select and change the font for the first line only. Lets say you typed in the sample text using the Arial font and then changed the font for just the first line to Arial Black.
Now, how do you change the font for all the text to Arial Black?Now, try to change the font for all the text in the text object to Arial Black.
It is possible for me to change the font for the entire text to any other font, except the font that is used for the first line.
Even if just a single word is typed, and you change the font for just the first character in the word, you then cannot change the word's font, to the font which you used for just the first character.
For some reason my text option list will only show one font option at a time (in CorelDRAW 11), but when I use X4 it shows the 5 last ones. Where in the 'Options' section can I correct that to show the longer listing?
View 3 Replies View RelatedI tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies View RelatedI am having a problem with cutting the size of text that I want. On the main working screen I type in the specific dimensions of the text that I want to cut ( I have a graphtec cutter). When I pull up "Cut/Plot" in the dialog box under Job Size....the size is NEVER what I have specified. It is normally smaller.I will then type the dimensions into the Job Size field and cut the letter. BUT when I cut the letter......it is not the size I typed into the job size.
View 9 Replies View Relatedthrough some difficulty I'm having in getting the leading (ie, line spacing) I want with artistic text, in CorelDraw 12? I have three lines of text, the first line of which has a font size of 20 pt, and the second and third lines having a font size of 13 pt. The default leading is greater between the first and second lines than between the second and third -- probably due to the font size difference. I would like to make the leading equal for all lines, regardless of font size, but can't figure out how to do that. "Format Text - Spacing - Lines" seems to offer leading only in relation to character height -- which automatically makes the leading between the first and second line larger (due to the larger font size used in the first line) than it is between the subsequent lines.
View 5 Replies View RelatedI'm perfectly happy with the TrueType font (BankGothic Md BT), but all the style settings change to the T1 equivalent every time I close, and when I open the file again the T1 text does not show up. I can go through and reset all the styles, then re-apply them, but it wastes a lot of time.
View 1 Replies View Relatedi need to type a text in corel of a specific size in millimeters. i know there is a setting in the corel options that allows sizing text directly in millimeters, instead of points. problem is that i need to type in romanian language, which has these points and marks above or bellow certain characters like A, T or S and the size in millimeters that i enter in the text size box will give that size to the "marked" characters, whereas i need only the pure, normal letter to be given that size. for example, an S with a comma under it.. i want just the S to be given a certain size and the comma scaled proportionally. furthermore, i would like to add an even spacing between all the letters that i type, also expressed in millimeters. i could only find a percent expressed setting in the text properties panel, i dont even know percents of what.
how can i do this in the fastest way possible, or automatically?
How can I change the default text size? I can set the size to 12 pt in three different places and choose "save settings as default", and when I place the text cursor on the page, it goes back to 24 pt. Very maddening...
View 5 Replies View Relatedthis function is not functioning anymore. I may have done something to cause this but I don't recall.
Entering sizes in the text boxes does not change the object size anymore.
The only option right now is use the transform size docker...would rather not have to do that.
Also, would not like to hit F8...
Draw X5 sp2 (15.2.0.661)
I hate pressing F8 at startup!
I want to use the font box, but all the font headings are dead - light gray. How can I turn them on and make them black / active?
View 5 Replies View RelatedI'm moving from using illustrator to CorelDRAW and the one thing I can't seem to find is how to hide frame edges - those bounding boxes around text and objects. Is this function available in CorelDRAW?
View 8 Replies View RelatedI found a bug on X6 and not sure if it was there before the update. I have a Power Clip frame that contains 2 images.
The one to the right is smaller than the frame while the one on the left is much bigger and there is a blank space between them. When I export the image to a PSD file the bigger image inside the frame wraps around and a portion is displayed on the right.
It's concerning the font SF Movie Poster
Two machines, both with XP, Corel Draw X3 13.0.0.576 and SF Movie Poster installed - BUT two different outputs.
Both Corels open the file and the characters with SF Movie Poster (I checked it by clicking in the words)
e.g. figure 1:
The first machine shows the number one as The other machine shows it like 1
I am new to Corel Draw. How do I arc font? I have a customer that wants some writting arced above her logo and below her logo. The only way I know how is to creat a circle and "Fit Text To Path". But then I can't seem to delete the circle without erasing the writting as well.
View 7 Replies View RelatedIf I create some text and change it from the default size (24 pt) to 14 pt and then rotate it, the size changes to the default point size (24 pt, I have even seen it do ~17.54)
Appears to have manifested with v16.4
It also squishes the text...
I have more than 1000 installed on an xp system. I know I don't need this many. I'm sure I could get by with 400 or less. How do you thin down your fonts? How many do you try to keep on your system?
What are you using for font management? Bit stream? Something else?
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I am trying to set the cut lines around a font that is an outline font and I can't get it to work - the outline just turns into the cut line and doesn't cut the font that I need.
View 14 Replies View Related