I have an MP3 sound file which I'd like to put on Vimeo.
I think you have to do this as a video, so my idea is to use it as a soundtrack for a video that has just one constant frame as the image.
I can add a single frame to the timeline and add the sound obviously but how do I make that one frame be the single image of the whole video (which is about four minutes long)?
I am really new to video Studio Pro X4. How can I isolate a single cell (frame) of a video clip and export it or save it as JPG or BMP or some other graphics format for use as a pic in another application. i.e. photosho, paint shop, Corel Draw, etc.
View 4 Replies View RelatedI recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies View RelatedWhen I try to make DVD with VideoStudio X6, I always got the out of size warning when I have more than 60 minutes of video. I can click 'OK' to let VS X6 adjust the video (quality) and fit it into a DVD. But I'm curious why VS X6 always complains about video longer than 60 minutes while on the internet most people (including Microsoft) said 120-150 minutes for a single layer DVD?
View 3 Replies View RelatedIs it all possible to show video in a picture frame, then over lapping with a person standing in front?
If so would there be a guide to able to do such a thing?
Why I cannot render a frame-based video when selecting (Share/Custom/MPEG Transport-stream)? My goal is to create an AVCHD video and burn it to a DVD (4.7G). My video is 16min long and the calculated bitrate is around CBR 15,000 kbps. If I use the (Share/ADVCHD/1920) option, I don't have any control over the settings. I have already deinterlaced my video using Neoscene. That is why I want to create a frame-based video.
Below is my workflow.
Two video sources:
.mov(1080p) from ContourHD 1080p camea
.mts(1080i) from Canon Vixia HF S100
1. Trim .mts files in CSV PX3
2. Trim .mov files in Contour S/W
3. Convert trimmed clips to .avi with Cineform Neoscene
4. Edit in CSV PX3
5. Planned to render in AVCHD, 1920x1080p, 29.97 fps, 15000 kbps
I shot some clips on my sony cyber shot camera (its about 2 years old so the content is not in HD). the clips are in .mpg format
i'm using the trial version for corel videopro x3 -. when i try to trim the clip, the output is not as good as the original clip. Why would this be ?
i selected the "same as project settings" option when creating the file. is there some other option i should choose ?
or is this because i'm using a trial version ?
i used to edit my clips in windows movie maker and it irrespective of whatever editing i would do, the clip quality would be exactly the same as that of the source clip.
I thought the best way to construct my video would be to 'cut' out all the sections of video I wanted to use, and save them in the library. When I had them all, I could then bring them down to the timeline where each needed to go. The videos I am working from are 512x288, and when I try to use the 'save trimmed video' function, it comes back saying my frame size is not per the settings.
I haven't seen a way to make the project accept a different frame size, that option is grayed out under preferences. Is there a way for me to cut out the sections I want and save them individually?
Is there a way to keep a video display its last frame after it ends play?
In this scenario lets say I have to overlays each with a video on them.Video A takes half the display and Video B takes the other half - so that they are side to side.
They are staggered in playback where the first ( Video A ) plays first and ends first and the second ( Video B) begins mid-way through when Video A plays.
I would like Video A to not go away after play but rather remain "still" on the last frame while Video B continues playing.
I have VideoStudio SE, packaged with Sabrent USB-AVCPT cables. I was able to capture video for a while. Now when I try I get the following message. "Capture video bit rate is 300. Frame size is 640 X 480. When using this frame size the video bit rate should be between 1578 - 8838."
View 5 Replies View RelatedHow can I edit a video to make it stop at a specific frame for a couple of seconds, add caption then continue playing like normal
*i would like to make the music pause at this specific frame as well and then continue from where it left off
I have some video in mpg format I'm trying to split into scenes, and then save off a separate videos. When I try to save one of the trimmed scenes using "Save trimmed video," I get the error: "Unable to compress video with the specific frame rate or frame size." It's all set in 16:9, and it's all set to 29fps, etc.
View 4 Replies View RelatedMy band has just recorded our first music video. We are very happy with the result except that the glasses on me (the lead singer) during the close-ups look very funny, they are very skew, and the "frame" does not go behind the ear.
What I would like to do is to import the video and edit these clips frame by frame, where this is showing. There is about 15 seconds totally of me in close-up - 15 x 24= 360 images. The clips are about 1-3 seconds long. And I want to edit all of these short clips of me and then make it a full-length video again.
I made a quick edit on one of the images from the video. The shades still look a little funny but it gets better when the frame goes behind the ear. If it's possible to correct the "glass" part of the shades as well.
When animating in PS2, how do I keep a single frame visible throughout the animation process?
View 1 Replies View RelatedI'm in thumbnail view (desktop) and i want to create a single coloured frame (right click and select new/colour source). i want to choose color by picking up from a clip in my desktop. The problem that as soon as i choose 'colour source', for whatever reason.... the background (desktop) become darker, so whatever i pick from background will be invalid color.
View 2 Replies View RelatedI have a single frame clip in my library, i want to put this clip into my timeline and i want it to be 10 seconds. I can just easily in/out in timeline and 'overwrite'. i don't like where i'm repeating a single frame and then still need to render it as 10 seconds clip.
This should be done like 'repeat' in the desktop tools. So in timeline when doing 'overwrite' , Smoke has to be smart to detect 1 frame edit so it just need to 'repeat' it not to 'timewarp' it.
And the another BAD thing , i can't have 'repeat' tool inside cfx . why ? so have to repeat the clip outside the cfx and go back into cfx.
How im going to make it just a single vertical frame in 45 degrees wall?
View 3 Replies View RelatedI'm using fcp hotkey , by default the 'drag copy (single frame)' is mapped to ' alt-c' . Normally this will work fine. But in some case where a cfx clip is selected or my time indicator is parked on top of a cfx clip in active timeline , then do 'alt-c' will give an error message "connectfx cannot be modified inside the containers. Proceed with edit ? "
So to solve this temporarily, i have to first deselect the cfx clip or move the current positioner on top of a non-cfx clip.
Part of my daily workflow is to export a single frame of my edit for client approvals. In the export menu, is there a way to NOT have Smoke add the zeros to the end of the file name?
Also, what's the best (fastest) way to export a single frame? The way I'm doing it now is that I'm copying a segment to the the desktop then going into tools then using the repeat function. is there a better way?
I am currently working on making a lens profile and the instructions are pretty annoying as they require the calibration chart to remain in the same spot while you tilt the camera as well as move the camera around to make sure that you are tilting the camera to bring the calibration chart close to a side of the frame but not clipping it and also staying within an angle of 10-30 degrees.
This seems overcomplicated, instead, why cant adobe make a single calibration grid where the camera is positioned in such a way that it fills the entire frame as much as possible without clipping, then it simply corrects using the single chart.
With the way it is now, unless you have the camera on a computer controlled dolly and computer controlled head, you will not be able to make a completely accurate lens profile.
I have started a new video project with a resolution of 1920 x 1080 in Photoshop CS6with a pixel aspect ratio set to square.. In the project I add a video to the timeline. The source video was created in QuickTime and exported at a 1920 x 1080 resolution MOV file. I have check both the source clip at the canvas siye and have confirmed that both are 1920 x 1080. However, when I import the video it takes up less than the entire frame. It appears that the video is being scaled down so that there is some white space to the right and below the video clip. See the image below.
In the past I have been able to import 1920x1080 video to a 1920x1080 project without a problem. I have 4 or 5 examples that have worked well.
I have Photoshop CS5, and everytime I try to make a gif I can't get the proper frame from the video...I keep getting the same one over and over again...
View 1 Replies View RelatedI recently upgraded to CS6 and am having a problem with Photoshop.
In my previous version (CS5.1) I could drag a single frame of video from a .mov file and drop it onto my Photoshop icon and Photoshop would open that frame as new document. But now in CS6 when I try to do this I get the following error: "Could not complete your request because Photoshop does not recognize this type of file"
Why won't this work now in CS6?
I'm on a Mac Pro, 12-core Intel with 24 gig of ram. Everything updated and licensed.
I imported a video layer from file then set the frame rate to 12fps, when I play the video it keeps changing the frame rate to random times. How do I keep it at 12fps?
View 6 Replies View Relatedi am trying to make a gif but i try using import video frames to layers and each time it always say could not complete the video frames to layers command because QuickTime 7.1 or later is required. I have uninstalled and reinstalled, and i also have QuickTime. Im using windows.
View 2 Replies View RelatedI want to add a skip frame effect to my video. Which tool should I use?!
View 2 Replies View RelatedWhile editing a small video (24MB) my video frame per second came to a grinding a hault - I have 4 GB ram which is at the low end of requirements, however suddenly the FPS dropped to a rate that makes it impossible to edit. I have restarted closed all other programs and my PC is not overtaxed. I have tried to play other videos that I had created with no issue and the same problem exists.
View 2 Replies View RelatedRunning Photoshop CS6 Extended 64-bit.
For some reason I cannot choose between Video Timeline & Frame Animation in the Timeline window. I do not know why, I've looked in the Timeline panel options, still nothing.
How do I switch to video timeline from frame animation?
View 1 Replies View RelatedI need to slow down a clip of video from its original frame rate. The original video is a piece of CCTV footage and is timelapse with a frame rate of 3fps and a total duration of 22 secs. I need to slow this footage down to create a slomo clip. can this be done in CS5ext?
View 8 Replies View Related