VideoStudio :: Keep A Video Display Its Last Frame After It Ends Play?
Dec 8, 2012
Is there a way to keep a video display its last frame after it ends play?
In this scenario lets say I have to overlays each with a video on them.Video A takes half the display and Video B takes the other half - so that they are side to side.
They are staggered in playback where the first ( Video A ) plays first and ends first and the second ( Video B) begins mid-way through when Video A plays.
I would like Video A to not go away after play but rather remain "still" on the last frame while Video B continues playing.
View 2 Replies
ADVERTISEMENT
Oct 10, 2013
While editing a small video (24MB) my video frame per second came to a grinding a hault - I have 4 GB ram which is at the low end of requirements, however suddenly the FPS dropped to a rate that makes it impossible to edit. I have restarted closed all other programs and my PC is not overtaxed. I have tried to play other videos that I had created with no issue and the same problem exists.
View 2 Replies
View Related
Nov 18, 2012
I just installed Video Studio Pro x5. When I load a .avi video it doesn't play. When I click play after I imported the file, the screen is black. If I play the avi in windows it works. How to get it visible so I can edit it it in x5?
View 5 Replies
View Related
Aug 19, 2012
I've owned X4 Pro for about a year and just now purchased X5 Pro/Ultimate. We use it for our voice over business, which on occasion needs to edit videos for very simple projects. VS seemed to fit the bill at its price point, but now I'm second guessing my decision.
The issue is the time it takes from hitting the "Play" button to the time it actually begins. I would have thought it to begin instantly. But instead it takes 2 ~ 3 seconds to start. It has been this way with both X4 and X5. Before you ask, it has been this way using the following setups:
Windows XP with both stock motherboard video and with Asus Geforce 210 (VS X4)
Windows 7 with both stock motherboard video and with newly bought MSI R6850 Cyclone 1GD5 Power Edition (both VS X4 & X5)
Types of videos used: every type of file extension I could get my hands on and every type of length (full length movies to a few second snippets).
View 4 Replies
View Related
Dec 1, 2010
I Just bought a new HP laptop and it came with Corel VideoStudio Pro X3 pre installed. When I go to open the program I get the error message 'Cannot initialize application. The screen resolution is too small to play the video. The screen resolution must be set to at least 1024 x 768". Well the screen res is on 1600 x 900, so i thought i would have that covered. I tried changing the screen res to 1024x768 and get the same message.
View 8 Replies
View Related
Jan 5, 2014
It used to be that whenever i would move the cursor in adobe premier with either the left or right arrows or by simply clicking and dragging it, it would play the audio from that frame. But it is not doing it anymore, I think i must have accidently hit a shortcut key or something to change it in settings i dont know. But it would be good if I could get the setting to change it back. I know for a fact that my laptops speakers do work, so its not that.
View 1 Replies
View Related
Feb 21, 2013
I have an MP3 sound file which I'd like to put on Vimeo.
I think you have to do this as a video, so my idea is to use it as a soundtrack for a video that has just one constant frame as the image.
I can add a single frame to the timeline and add the sound obviously but how do I make that one frame be the single image of the whole video (which is about four minutes long)?
View 2 Replies
View Related
Jun 8, 2011
Is it all possible to show video in a picture frame, then over lapping with a person standing in front?
If so would there be a guide to able to do such a thing?
View 2 Replies
View Related
Apr 15, 2011
Why I cannot render a frame-based video when selecting (Share/Custom/MPEG Transport-stream)? My goal is to create an AVCHD video and burn it to a DVD (4.7G). My video is 16min long and the calculated bitrate is around CBR 15,000 kbps. If I use the (Share/ADVCHD/1920) option, I don't have any control over the settings. I have already deinterlaced my video using Neoscene. That is why I want to create a frame-based video.
Below is my workflow.
Two video sources:
.mov(1080p) from ContourHD 1080p camea
.mts(1080i) from Canon Vixia HF S100
1. Trim .mts files in CSV PX3
2. Trim .mov files in Contour S/W
3. Convert trimmed clips to .avi with Cineform Neoscene
4. Edit in CSV PX3
5. Planned to render in AVCHD, 1920x1080p, 29.97 fps, 15000 kbps
View 5 Replies
View Related
Dec 19, 2010
I shot some clips on my sony cyber shot camera (its about 2 years old so the content is not in HD). the clips are in .mpg format
i'm using the trial version for corel videopro x3 -. when i try to trim the clip, the output is not as good as the original clip. Why would this be ?
i selected the "same as project settings" option when creating the file. is there some other option i should choose ?
or is this because i'm using a trial version ?
i used to edit my clips in windows movie maker and it irrespective of whatever editing i would do, the clip quality would be exactly the same as that of the source clip.
View 1 Replies
View Related
Oct 8, 2011
I thought the best way to construct my video would be to 'cut' out all the sections of video I wanted to use, and save them in the library. When I had them all, I could then bring them down to the timeline where each needed to go. The videos I am working from are 512x288, and when I try to use the 'save trimmed video' function, it comes back saying my frame size is not per the settings.
I haven't seen a way to make the project accept a different frame size, that option is grayed out under preferences. Is there a way for me to cut out the sections I want and save them individually?
View 4 Replies
View Related
Jul 23, 2013
I have VideoStudio SE, packaged with Sabrent USB-AVCPT cables. I was able to capture video for a while. Now when I try I get the following message. "Capture video bit rate is 300. Frame size is 640 X 480. When using this frame size the video bit rate should be between 1578 - 8838."
View 5 Replies
View Related
Feb 4, 2011
How can I edit a video to make it stop at a specific frame for a couple of seconds, add caption then continue playing like normal
*i would like to make the music pause at this specific frame as well and then continue from where it left off
View 5 Replies
View Related
Mar 24, 2012
I am really new to video Studio Pro X4. How can I isolate a single cell (frame) of a video clip and export it or save it as JPG or BMP or some other graphics format for use as a pic in another application. i.e. photosho, paint shop, Corel Draw, etc.
View 4 Replies
View Related
Mar 21, 2011
As I launch a videocapture on videostudio pro X4, I don't get any video display on my screen, only hearing the sound. Afterwards, the generate file is OK with picture and sound.
View 5 Replies
View Related
Oct 21, 2007
I have some video in mpg format I'm trying to split into scenes, and then save off a separate videos. When I try to save one of the trimmed scenes using "Save trimmed video," I get the error: "Unable to compress video with the specific frame rate or frame size." It's all set in 16:9, and it's all set to 29fps, etc.
View 4 Replies
View Related
Dec 4, 2013
I am a new VS6 user (coming from Pinnacle Studio). Is there a way to display the video and the video's audio waveform on the timeline at the same time. I see where I can select the Sound Mixer button above the timeline, which does show the audio waveform, but then the video thumbnails disappear.
2nd question, when I put a fade-to-black transition between two clips, it seems like the clips' audio does not get faded out then in with the next clip. Do I have to add a separate audio fade for every video fade?
View 8 Replies
View Related
Feb 17, 2013
Video will not play properly [audio plays well video hangs ] in Adobe Photoshop CS6 running on a Win7-64 machine equipment with a quad-core processor. Video plays properly in Lightroom 4 and Bridge CS6.
View 6 Replies
View Related
Aug 7, 2013
Windows 7 and PS CS6. I am trying to use the motion effect "PAN" in PS CS6 but the image is large. 7364 x 1080. It pans but clips the ends. The image in the timeline has a slider at the bottom, I take that to mean the image is to wide for the video frame. How can I use the pan effect in PS cs6 to pan a large panorama ?? I tried splitting the image but the seperate images are not a smooth single image.
initial image was 1.93 gigs as a 16 bit tiff, converted to jpeg 7364 x 1080.
View 5 Replies
View Related
Nov 19, 2013
My band has just recorded our first music video. We are very happy with the result except that the glasses on me (the lead singer) during the close-ups look very funny, they are very skew, and the "frame" does not go behind the ear.
What I would like to do is to import the video and edit these clips frame by frame, where this is showing. There is about 15 seconds totally of me in close-up - 15 x 24= 360 images. The clips are about 1-3 seconds long. And I want to edit all of these short clips of me and then make it a full-length video again.
I made a quick edit on one of the images from the video. The shades still look a little funny but it gets better when the frame goes behind the ear. If it's possible to correct the "glass" part of the shades as well.
View 9 Replies
View Related
Aug 31, 2013
Using cs6 and video won't play on tv/dvd? Settings? Have tried several and nothing is working? It will play on computer but I need it to show on tv using dvd player.
View 6 Replies
View Related
Aug 7, 2013
My Canon 60D video (*.mov) files are sucessfully imported to the Lightroom catalog, but Lightroom won't play them in LibraryLoupe view.
http:[url].....
but it shows video frames, when I hover mouse from left to right edge of item in LibraryGrid view. Seems like output of "Loupe" for video is broken and play control (scroll and buttons) is disabled. Have tried LR 5.0 and LR 5.2 RC.
Quick time 7.7.4 plays this files perfectly.
OS: Windows 8.1 Preview
View 2 Replies
View Related
Apr 6, 2014
I recently downloaded Premiere Pro through Creative Cloud and I have now made a video I wish to share with friends and family. The only trouble is, whenever I export it, the video saves and shows up in my folders but if I try to open it a notice comes up saying " Server execution failed". Why does this happen and how can I get my video to play on things such as Windows Media Player? I have used Premiere Pro at college many times before and all the exporting details looked fine but that didn't work and even when I made a few adjustments.
View 1 Replies
View Related
Apr 1, 2011
Navigation controls are set to “Auto repeat when playback ends”
I change this to “Continue to play next clip” which plays the disc and returns to menu.
The next time I come to use Video Studio it has reverted to the default option.
Earlier versions always retained the options set by the user.
How to check their version to see if you can duplicate this, or is it something to do with my settings?
View 6 Replies
View Related
Feb 19, 2014
I cannot play a video .mov file in Photoshop Elements 12
View 7 Replies
View Related
Mar 31, 2012
For some reason today it just stopped paying the audio from my Nikon D300S video files. I tried importing a new file but that won't play either and I reloaded the program and that won't work either. I know the audio is that as it will play in Windows.
View 1 Replies
View Related
May 24, 2013
Llightroom 4.4 crashes everytime I try to playback video causing the app to close. The video loads fine, I can see the thumbnail, but when I hit play I hear audio for a few seconds, the video doesn't typically play or plays for only 1 second then the app crashes. Video files play fine in quicktime or Windows media. This happened in 4.3 as well so not related to the upgrade to 4.4. Here is what is logged in the Windows error log.
Windows 7 64 bit
Application Error
Faulting application name: lightroom.exe, version: 4.4.0.11, time stamp: 0x514b016c
Faulting module name: MSVCR100.dll, version: 10.0.30319.1, time stamp: 0x4ba220dc
Exception code: 0xc0000005
Fault offset: 0x000000000003c250
Faulting process id: 0x13d4
Faulting application start time: 0x01ce58f418edb142
Faulting application path: C:Program FilesAdobeAdobe Photoshop Lightroom 4.4lightroom.exe
Faulting module path: C:Windowssystem32MSVCR100.dll
Report Id: 843f731f-c4e7-11e2-a017-00214f56581f
View 6 Replies
View Related
Aug 20, 2011
I have PSP X3...we are having a family reunion, and decided to create a DVD slideshow of past and present family members to show on a TV screen. The idea was to use a DVD player to play the slideshow, and hopefully be able to give out DVDs of the slideshow to family members at the reunion.
We have been able to create the slideshows using Project Creator: the slideshow consists of typical jpg files scanned using a typical scanner/printer of old photographs. The slideshow is a default .AVI container, which all 3 DVD players we have tried to use state they support AVI. However, none of the DVD players have been able to play the slideshow, saying "disc error", or "disc is not compatible for playing or recording".
My question is, do we need to use the actual Corel PSP X3 program, in order to make the slideshow work? We are able to connect a laptop to a widescreen TV for showing at the reunion, but this would kill our ability to hand out DVDs of the slideshow to family members, as they would 1) need a PC, and 2) need Corel PSP X3 in order to make the slideshow play.
Surely there should be a way to make the video play for typical DVD player support. We have used a Sony, Panasonic, and a Memorex DVD player, with the 1st two options being fairly new, DVR devices.
View 3 Replies
View Related
Dec 4, 2012
The clips are playable with Quicktime or Windows Media Player.
View 4 Replies
View Related
Sep 16, 2013
When I double click on the video downloaded from NikonD7100 in Library mode in lightroom 5 it will not play. I have windows 8..
View 1 Replies
View Related
Sep 5, 2012
I'm using Photoshop Elements 10 Organizer with Premiere Elements10 Installed. I have a number of files of type MTS which I understand to be AVCHD and are imported from my Panasonic Lumix TZ20 camera which captures HD video. These files will not play in the Organizer, resulting in a message stating the required Codec is missing. However, when the same file is sent to Premiere Elements for Editingand agreeing to a message to have Premiere set the correct properties for the media type it plays perfectly. What am I do wrong? Are there any settings I need to change to have Organizer also play the file successfully?
View 2 Replies
View Related
