VideoStudio :: Cannot Initialize Application / Screen Resolution Is Too Small To Play Video
Dec 1, 2010
I Just bought a new HP laptop and it came with Corel VideoStudio Pro X3 pre installed. When I go to open the program I get the error message 'Cannot initialize application. The screen resolution is too small to play the video. The screen resolution must be set to at least 1024 x 768". Well the screen res is on 1600 x 900, so i thought i would have that covered. I tried changing the screen res to 1024x768 and get the same message.
View 8 Replies
ADVERTISEMENT
Nov 4, 2013
I just upgraded from VS Pro5 to VS Pro 6. Will not launch.
Get error msg "Screen resolution size is not sufficient to launch the application"
Screen resolution is currently set at 1366 x 768 which is "recommended" I have reset resolution and restarted with each attempt at changing resolution... still get message..
Not a happy camper... Seems they should be sophisticated enough to check that system is set properly.... and if not, to give information on how to correct.
View 2 Replies
View Related
Apr 1, 2011
I'm trying to run the trial version of VS Pro X4 after picking up a disc at Focus on Imaging at the NEC in Birmingham. I've trioed installing it on two different PCs and get the following message on both: Cannot Initialize Application Invalid Parameter [16345:1:1] [15034:1:32]
I was very impressed with the demo at the NEC and am keen to buy, but not if it's going to misbehave.
View 11 Replies
View Related
May 1, 2012
After not having much luck with the last video card, I changed my video card to a device with the Philips 713x chipset
Now when I select video capture I get the following message:
failed to initialize the video capture plugin
Open driver failed
(15200:43:0)
(15023:4:2)
cannot create the video capture filter
I have just installed card (SAA7130 TV PCI card) with latest drivers excluding the software so Video Studio 12 pro is the only capture software on the machine . I also re-installed both card and Video Studio after doing a complete system restore and used CC cleaner to remove any residual data before re-installing.
I need to use video capture within the Video Studio software as I need to use the scene detection functionality.The reason I had to change the card in the first place is that video studio only allowed me to capture in AVI 320x240 and gave 'capture failed' errors with anything else.
View 1 Replies
View Related
Jan 14, 2012
I download avi files and then edit them in Videostudio X4. THe avi's are always from different resolutions and framerate.
When i play the converted or edited avi files on my mediaplayer on a Widescreen tv then the video is played may time not full screen. Sometimes it is on top and sides filled with black borders.
I would like the video's always be full screen on tv (off course with good quality).
My question is: how can i see in Videostudio if the video can be played full screen on tv?
Let's say i have 2 video's: divx / xvid 576 x 320 at 25.000 fpsec and 512 x 384 at 188.900 at 25.000 frames per second. Would these files be played full screen on the tv?. How can i calculate that it is 4:3 or 16:9 and what must the preference be in Video studio itself: 16:9 or 4:3?
View 1 Replies
View Related
Nov 18, 2012
I just installed Video Studio Pro x5. When I load a .avi video it doesn't play. When I click play after I imported the file, the screen is black. If I play the avi in windows it works. How to get it visible so I can edit it it in x5?
View 5 Replies
View Related
Dec 8, 2012
Is there a way to keep a video display its last frame after it ends play?
In this scenario lets say I have to overlays each with a video on them.Video A takes half the display and Video B takes the other half - so that they are side to side.
They are staggered in playback where the first ( Video A ) plays first and ends first and the second ( Video B) begins mid-way through when Video A plays.
I would like Video A to not go away after play but rather remain "still" on the last frame while Video B continues playing.
View 2 Replies
View Related
Aug 19, 2012
I've owned X4 Pro for about a year and just now purchased X5 Pro/Ultimate. We use it for our voice over business, which on occasion needs to edit videos for very simple projects. VS seemed to fit the bill at its price point, but now I'm second guessing my decision.
The issue is the time it takes from hitting the "Play" button to the time it actually begins. I would have thought it to begin instantly. But instead it takes 2 ~ 3 seconds to start. It has been this way with both X4 and X5. Before you ask, it has been this way using the following setups:
Windows XP with both stock motherboard video and with Asus Geforce 210 (VS X4)
Windows 7 with both stock motherboard video and with newly bought MSI R6850 Cyclone 1GD5 Power Edition (both VS X4 & X5)
Types of videos used: every type of file extension I could get my hands on and every type of length (full length movies to a few second snippets).
View 4 Replies
View Related
Oct 6, 2013
After I successfully imported some videos into VideoStudio, I tried to preview them. Originally, the video preview was taking a quarter of the screen. It is still the case, but when I start playback, now the video size becomes half of this (half ot the quarter screen preview). I am searching since half an hour without any success for a solution. Google always return me PDF documents describing main features of Corel VideoStudio as well as reviews of the product. I thought this could be related to the fact project properties are set to output video at 480p, but I cannot set the project properties to HD. The HD option is just not there. Seems VideoStudio X6 Pro can only work for DVD projects and upconvert to HD after the fact. I found some page showing how to configure project as HD, but the layout of the options does not correspond to VideoStudio X6. Could this be because X5 had HD and X6 has not? Would be quite surprising. Seems I really have to ask support from Corel, seems an unknown undocumented issue, but I am now outside the 90-day warranty period and don't want to pay to be told to reformat my computer. So I will try other software, be pissed off during weekends and weekends and probably end up trying with another computer or asking a friend with a Mac to do the editing for me with Final Cut (and literally wait MONTHS to get a single 30-minute video).
View 3 Replies
View Related
Mar 20, 2011
Just got a new HD video camera, Sony HDR-CX550V. Recorded short video clips and imported these clips (format AVCHD) to my computer using VS Pro X3. The imported clips have small icons or symbols in the top left corner. What do these symbols represent ? Where can I find descriptions of these symbols ?
View 2 Replies
View Related
Dec 13, 2013
I have Corel VideoStudio X6 and am experiencing a relink problem. I moved all my media (pics and vid) from c:HomeMediaFiles to d:MediaFiles. I open VS and relink to the new location.
I noticed it didn't relink properly, I have videos with the same name in different directories. In the end it linked to the incorrect video.So, here's my question:
Is there a master file the VideoStudio application uses to reference video locations? I would assume it’s the library and I was hoping I could possibly open the file (with notepad or something) 'find and replace' c:HomeMediaFiles to d:MediaFiles and avoid the relinking through the interface.
I reloaded my library so I still have everything with the old references after I tried to relink through the UI. Good thing I backup regularly.
View 5 Replies
View Related
Feb 26, 2012
I'm having problems trying to set the video resolution on both of my copies of VS Pro X4. The captures I'm using are 16x9, and when I select a thumbnail and play it, the clip first displays as 4x3 in the preview window, then when it starts playing, it goes to 16x9, but when I put the clip in the video track, it displays and plays in 4x3... even after I change the Project Properties to 16x9, it still does the same thing.
I have recently taken some of the same files and created a 16x9 optimized MPEG in the share menu, but for some reason, I'm unable to do it again. I have had problems with my capture device, and haven't used VS Pro X4 for a while, but now I have a new methodology, and am back to working with video, again. Some of the things I did before, are now forgotten... I'm sure the answer is somewhere on this site, but so far, all of my searches and reading have only offered the things I have already done, and so far as I can tell, that doesn't work. At this point, I can't remember if the editing I did before, was displayed in 4x3 or 16x9, but the DVDs I have burned are definitely in 16x9, but the last one was definitely 4x3.
View 4 Replies
View Related
Aug 2, 2011
I am using VS X2. I am trying to create a DVD of my project. I have assembled my files/projects, created a menu, and previewed. This is as far as I can get. The prompts at the bottom of the page are not displayed properly. I have a "back" prompt in the lower left and it looks like there is the start of a prompt in the lower right. I have adjusted my screen resolution to no avail.
View 2 Replies
View Related
Feb 20, 2013
I am not yet an owner for VideoStudio. This program is on my short list of software I wish to use for screen capture (creating a series of tutorials for an online classroom) and I have to be able to produce these items in a minimum of 720P 16x9 format (Ideally would like to grab at 1080P but 720 is my absolute minimum requirement). Can VideoStudio do this for me? Do I need a specific capture/video card to be able to acquire at a 720P resolution?
I have a background in broadcast television in my day job, (I edit on Quantel and Apple FCP) and what I like about this software is that it's an "all in one" solution.
PS. running Windows Vista Ultimate 64bit, 8GB RAM, NVidia GeForce9600GT card
View 1 Replies
View Related
Nov 8, 2011
I am new with X4 and with Corel software. I just want to ask you why I am unable to choose my custom resolution?
I try to share my video with MP4 format, and I am using custom settings but user defined resolution is not available.
View 6 Replies
View Related
Nov 2, 2011
I have canon legria HFR 106 [URL]......
Problem is setting of the best resolution:
-FULL HD is making these horizontal lines (every other pixel line) if something moves in the picture so its not good
- lower camera setting makes the resolution to 1440x1080 which is 4:3 !! that's not the ratio of today (and youtube) and i didn't even realize it because video studio has 16:9 project settings and the ratio of outputted video seems right?
- Compared these: video 4:3, project 16:9, still images from another camera 4:3 -> fail
what do you recommend, is there a way to get full resolution better without those lines or other way to 16:9 ?
2. Also only recent and fast opening player to play those camera raw videos (.mts) is VLC-player. Is there a way to get it open those videos in zoom mode of 50% or 33% and not 100% they goes over my screen every time!
View 4 Replies
View Related
Aug 23, 2012
it openes a dialog box that read: this application has failed to initialize properly ( 0xc000001d). click ok to terminate program
View 5 Replies
View Related
Feb 8, 2012
when i run 3dsmax 2012 it tell me "the application failed to initialize properly (0xc0000005)"
View 2 Replies
View Related
May 13, 2013
I cannot open Illustrator CS6. I get this error. How do I proceed?
View 3 Replies
View Related
Feb 1, 2012
I have been copying a number of pre-recorded video clips onto a DVD-R disc and playing them on my DVD recorder. As my Panasonic DMR-XW380 DVD recorder only plays DivX or XviD video files I have to convert the files I have to this format.
We have a Sony Bravia 40" TV and I was wondering about the best settings I should use for the Frame Resolution and bitrate etc. When I render anything to DivX with VS I use a Frame Resolution of 720 x 576 and a bitrate of 56kbps and this seems to play okay in my setup. Do you think these settings could be improved?
View 11 Replies
View Related
Oct 23, 2004
i have some big .jpgs with low resolution say 10x10 inch at 72dpi.
is it possible for me to convert it to 2x2 inch at 300dpi?
View 5 Replies
View Related
Apr 25, 2013
I just recently started having problems with my PSP Photo XI program on my laptop. The other day it would start up and run normally, but the next day when I went to run the program, it wouldn't start. My computer would freeze up and show this error message: "The application failed to initialize properly (0xc0000006). Click OK to terminate the applicaion."
I tried turning off my computer and running the program again, but the same thing came up. I tried to run the repair program on it, nothing. I even tried to uninstall PSP XI to no avail as I got a different error message: "Internal Error 2328 C:Program FilesCorelCorel Paint Shop Pro XICoreErrorCodesRC.dll"
I really don't know what to do, short of just completely resetting my laptop back to factory settings and starting fresh. But even then I don't know if that would fix the problem.
I wish I knew why the program decided to just stop working one day, as I haven't downloaded anything and my anti-virus is up to date.My computer is a Dell XPS M1710, and it runs Windows XP SP3.
View 4 Replies
View Related
Mar 21, 2011
As I launch a videocapture on videostudio pro X4, I don't get any video display on my screen, only hearing the sound. Afterwards, the generate file is OK with picture and sound.
View 5 Replies
View Related
Apr 15, 2013
My exported videos don't seem to be full screen. My source data are jpg pictures in 4272x2848 resolution (Aspect Ratio of 3:2) turned into time lapse videos. I have tried exporting in MPEG-4 and WMV Screen capture 1920x1080 (1.777:1) and the resulting videos have black bars on the sides because of the different aspect ratio. I would ideally like to have an imported video file that is the same aspect ratio as the source pictures, something like a 1620x1080 (3:2). Can I pick a custom resolution for exporting? Is there a way I can crop the black bars out afterwards? Can I apply a cropping filter to the current project before exporting?
The "Enable Widescreen" setting had no effect on the videos, they came out identical.
View 3 Replies
View Related
Feb 17, 2013
Video will not play properly [audio plays well video hangs ] in Adobe Photoshop CS6 running on a Win7-64 machine equipment with a quad-core processor. Video plays properly in Lightroom 4 and Bridge CS6.
View 6 Replies
View Related
Jun 27, 2012
I am making a screen shot video for my website. I created 6 individual short videos that look great. When you play them individually, they look great. These are "how to use the website" short videos that do have typing on the screen. The typed words are perfectly clear as individual videos.
As soon as i merge the clips into 1 video, the typed words and the whole video gets fuzzy. I have re-shot new videos and I get the same result.
I have searched all over the internet for the last couple of weeks researching a solution. I've enlisted smart proxy and gone through just about every setting in "preferences" painstakingly slow and I still can't figure it out.
All of my information for my computer should be correct, but wasn't sure if i got the video card correct.
View 7 Replies
View Related
Mar 31, 2012
I edit an mp4 video and produce a new mp4 video. If I produce the new mp4 while I open the project, the screen size is normal. (c_not_use_batch.jpg) If I produce the new file using batch convert, the screen size is reduced (c_use_batch.jpg) However, the setting for producing the files are the same (c_setting.jpg)
The files and settings are the same. The only difference is using batch convert or not.
This happens to Video Studio Pro X3 and X5.
View 12 Replies
View Related
Jul 18, 2013
I'm using Corel videostudio X6 and I have 2 problems.
1. when i go in to track/customize motion mode, the window is bigger than the screen so i can't use this option (i'm using lap top wide screen). like in here: [URL] ....
2. when i'm adding a text to low quality video the text doesn't look well and i wonder how can i maintain the quality of the text?
View 1 Replies
View Related
Jan 22, 2013
in capture mode, choosing "capture video"I get error message "failed to initialize the video capture plug-in another program may be using it or this file has been moved" " open driver failed" 152.00.43.0 15023.4.2 my video capture device is a USB WDM 2860 and shows in the "source" window but no "formate" can be chosen and no video comes through. The operating system is windows 7 64 bit. I have "Magix movie edit pro 17" and "Cyberlink Video Director" and both of these programs work with the same device and capture. Neather one of these applications are running while using Video Studio. I checked and nothing else is utilizing this USB WDM 2860 device. I reinstalled the software, installed the patches, and uninstalled the USB drivers and reinstalled them.
View 7 Replies
View Related
Nov 12, 2005
I have a photo that I copied from an Power Point Presentation which looked great on Power Point but when I have it in PS I noticed that the image size is just 2.507x1.028 with a res. of 576. Pixel Dimensions are 2.45M
I would like to print out a larger version of this photo but I'm not having much luck with it. It gets blurry when I try to enlarge it.
It was on Power Point as PNG graphic and I saved it to the desktop as a Gif andthen dragged it into PS.
Don't know much about Power Point maybe there is a better way to transfer pics from it.
View 4 Replies
View Related
Aug 18, 2006
I changed to 6 x 4 resolution. I put the photo paper plus glosssy in my printer and printed it out but it's too small. What happen?
View 4 Replies
View Related
