I am new with X4 and with Corel software. I just want to ask you why I am unable to choose my custom resolution?
I try to share my video with MP4 format, and I am using custom settings but user defined resolution is not available.
I have a HD mov file. When I drag it into my timeline I don't get a message to match the project properties to the file type even with the correct preference. I understand that with the mov file type this doesn't work in X4 anyway. Anyway, after a bit of trimming I want to create a file with exactly the same specifications as the original.
I obviously cant use same as project settings option. For some reason I do not have the same as first clip option either. So how do I tell X4 to keep the original file properties when creating a new file?
One of my main complaints with Lightroom 4 is that I can't seem to export video at a custom resolution or bitrate (like dvd size for instance). Am I missing something, or is this really not possible? I hate having to use Handbrake to archive my videos - I wish I could just do it all in Lightroom. I'm using Lightroom 4.3
View 7 Replies View RelatedI'd like to create a video with an awkward resolution: 400x70. I don't see how to do this in VS5. Even when I go to the "Share" option, my custom resolution buttons are greyed out. Is there a way to do this?
View 1 Replies View RelatedI'm having problems trying to set the video resolution on both of my copies of VS Pro X4. The captures I'm using are 16x9, and when I select a thumbnail and play it, the clip first displays as 4x3 in the preview window, then when it starts playing, it goes to 16x9, but when I put the clip in the video track, it displays and plays in 4x3... even after I change the Project Properties to 16x9, it still does the same thing.
I have recently taken some of the same files and created a 16x9 optimized MPEG in the share menu, but for some reason, I'm unable to do it again. I have had problems with my capture device, and haven't used VS Pro X4 for a while, but now I have a new methodology, and am back to working with video, again. Some of the things I did before, are now forgotten... I'm sure the answer is somewhere on this site, but so far, all of my searches and reading have only offered the things I have already done, and so far as I can tell, that doesn't work. At this point, I can't remember if the editing I did before, was displayed in 4x3 or 16x9, but the DVDs I have burned are definitely in 16x9, but the last one was definitely 4x3.
I have used X4 for about two years and X6 for the past couple of months. I cannot figure out how the create more rendering options under Share -> Create Video File. For example, if I want to use the MPEG codec but a custom resolution. Often custom is greyed out and not selectable. In free software such as ffmpeg or Virtual Dub I can create video as any resolution, aspect ratio, or codec. VS options seem to be very limited to these prepackaged choices. For example, some people have described moving a .DLL to the Coral folder to get custom codecs under the Create Video -> custom option. I'd rather not have to always render in VS and then recodec in another software.
My biggest challenge is the new Instagram format. It is basically 640x640 webm format. But I can import MPEG h264 without issue. My goal is to setup a 1:1 640x640 profile so I don't always have to game and stretch titles to display properly in the final version.
I have canon legria HFR 106 [URL]......
Problem is setting of the best resolution:
-FULL HD is making these horizontal lines (every other pixel line) if something moves in the picture so its not good
- lower camera setting makes the resolution to 1440x1080 which is 4:3 !! that's not the ratio of today (and youtube) and i didn't even realize it because video studio has 16:9 project settings and the ratio of outputted video seems right?
- Compared these: video 4:3, project 16:9, still images from another camera 4:3 -> fail
what do you recommend, is there a way to get full resolution better without those lines or other way to 16:9 ?
2. Also only recent and fast opening player to play those camera raw videos (.mts) is VLC-player. Is there a way to get it open those videos in zoom mode of 50% or 33% and not 100% they goes over my screen every time!
I've been creating video files in Pro X5 to upload to Vimeo. They are fine but I wondered if I could create a better quality format to watch on my laptop e.g. in terms of Kbps etc. The files are:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
They are created from source files which are:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
What would be the best format quality for a laptop? I tried 20,000 Kbps and 256 Kbps sound for the heck of it but the laptop struggles to play them.
How to render HD 1920 x 1080 video clips into the .mov, 1080p format required by my stock agency. I've gone into Share>Create Video File>Custom>Quicktime Movie Files>Options>General... but I am unable to find a 1920 x 1080 option. 800x600 is the highest setting with the default being 720x480. I'm using VS Pro X4 and also tried X2.
Original clip info for one camera: Type H.264, 24 bits, 1920x1080p, 16:9, 59.94fps Vari. bit rate 26,000
I have been using Video Studio Pro 4 and was always able to insert, play and record to dvd the MOV file format. All of a sudden I am getting an VS 4 will not let me add Mov files to the time line.
View 4 Replies View RelatedI have footage in the following format which I'd like to upload to Vimeo (it was shot on a basic home camcorder some years ago). What would be the best format? I have VideoStudio Pro X5 trial version.
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 4:3, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
The Share - Upload to Web - Vimeo MPEG-4 4:3 option gives you:
MPEG-4 Files
24 bits, 640 x 480, 25 fps
Frame-based
H.264 Baseline Profile Video: 2500 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
Is this OK? Vimeo said they pillarbox all SD videos (ie. smaller than 1280x720) in order to fit them into their standard player so should I do the Vimeo HD 16:9 option for instance?
It gives you:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
I created a 4 minute video project in VS Pro X3. Source of video clips were from a Sony HDR-CX550V camcorder. I added some titles to a few video clips and 3 titles on a "Graphic - Color" background. When creating a video file (under SHARE) and choosing Blu-ray ----> NTSC MPEG2 (1920 x 1080), I found the following: Video clips are sharp, no problem, but the titles have black lines at irregular intervals, to the point that the letters cannot be read. What may be the cause and how can I eliminate this problem.
View 4 Replies View RelatedGiven that it seems to be a good idea to render VSP projects to a single video file before attempting to create a DVD through Share Create Disc, I am wondering what is the most optimal type of video file to initially render the VSP into.
The video from my camera comes in a ACVHD 1080/60i. My target final disc is either 1) standard DVD, or 2) Blu Ray. I have been rendering the VSP into a 1920x1080 AVCHD format.
What's the best format to use when transferring VHS tapes to my p.c? I've tried AVI but an average tape takes up to 400Mb on my hard drive which seems excessive. The VHS tapes mainly have films and documentaries the majority of which will be deleted once I've watched them on my PC.
View 2 Replies View RelatedFirst, some glitches (short freeze frame) at video transitions. Usually at the end of the transition. I could upload some samples... The problem persist in both : hardware or software accelerated mode.
Also, when i want to create a video file and i use the "same as first video clip" even the project is a HDV 1440x1080 format, the video is created as DVD 720x576 4:3 aspect.
I'm using Video Studio Pro X2 on XP.
I have a personal website and upload video files for people to download. My videos are around 45-60 mins long and I save them using MPEG optimizer usually, resulting in file sizes of around 2GB. These files take a long time to download, and I have to upload them overnight. I've downloaded video files of around 60 mins in duration from other sites which have been only 500MB in size. These tend to be WMV files 25bit with frame size around 640 x 480 and bit rate of around 1122fbps, frame rate 25fps.
Is this the best format for achieving a compromise between quality and file size? The WMV options un custom are much smaller frame sizes, where can I find the right option? Is there a better format available in the custom menu?
I have made a project last night. and when I was gonna save it, it was written that video studio only save file as *VSP. I want to know how to save the project as a video format for example as *WMV or something like that.
View 2 Replies View RelatedI have been copying a number of pre-recorded video clips onto a DVD-R disc and playing them on my DVD recorder. As my Panasonic DMR-XW380 DVD recorder only plays DivX or XviD video files I have to convert the files I have to this format.
We have a Sony Bravia 40" TV and I was wondering about the best settings I should use for the Frame Resolution and bitrate etc. When I render anything to DivX with VS I use a Frame Resolution of 720 x 576 and a bitrate of 56kbps and this seems to play okay in my setup. Do you think these settings could be improved?
I Just bought a new HP laptop and it came with Corel VideoStudio Pro X3 pre installed. When I go to open the program I get the error message 'Cannot initialize application. The screen resolution is too small to play the video. The screen resolution must be set to at least 1024 x 768". Well the screen res is on 1600 x 900, so i thought i would have that covered. I tried changing the screen res to 1024x768 and get the same message.
View 8 Replies View RelatedHow do I export my video to 720p mp4 file format?
I can't find the option. In fact I can't find many options. The custom settings are not very custom really as the choice is very limited or none.
Is there any way that i can convert a video into the jpg format using Video Studio 10+ or Photo Impact 11 ?
( that is apart from the " save as image " in Studio) Like a batch convert job.
Or perhaps a freebie converter out there.
I own VS 12, and when I work with HDV footage, I'm able to create an HDV video file either with MPEG optimizer or Same as first video clip. The project smart renders and I get HDV file. I've downloaded VS 15 trial as a test, as it has some additional features I'm interested in. However, with the VS 15 trial, following the same steps produces a file formatted as NTSC DVD 4:3 and no smart render. Am I missing something or is this a bug/limitation of the trial? Corel says the trial is fully functional. I'm running Windows 7 Pro 64 bit i5 4 GB ram. I even tried installing the VS 15 trial on my old XP laptop and had the same issue.
View 2 Replies View RelatedIn order to create a video file in the AVCHD 1920X1080 format, I have the following options in the VSP X6:
AVCHD (1920X1080)
AVCHD (1920X1080, 24P)
AVCHD (1920X1080, 25P)
AVCHD (1920X1080, 50P)
What is the differences between those formats, so I don't know what to choose. My original clips are 25 frames/sec, does it means that I have to choose the 25P?
I'm creating video clips in Corel Video Studio X4 Ultimate (Education),for use in creating multimedia PDFs with Adobe Acrobat X Pro.
The formats Adobe Acrobat says is accepts include MPEG 4 / H.264,so in Corel Video Studio X4 I've tried selecting the following types of output file:
1) "MPEG4: iPhone H.264 (640 x 480)" My preferred resolution, but Adobe Acrobat won't accept it, apparently because it's "Sony PSP" (according to an analysis by MediaInfo), not supported by Flash, according to an advisor on the Adobe forums.
2) "MPEG4: iPod H.264" (320 x 240) This is accepted by Adobe Acrobat, even though it's also Sony PSP (according to MediaInfo). But this isn't enough resolution for my purposes.
3) "MPEG4: iPhone 4/iPad HD" This is also accepted by Adobe Acrobat, but the resolution is too high (1280x720) as the files are too large.
I have a h.264 video file in .m2ts format, captured using a TV card, and I want to burn this to an AVCHD DVD. I've been trying to do this with VSX4. I don't want the video to be re-encoded because it's already in a suitable format. If I open X4, and then Create Disc and insert the video, the video plays fine and everything looks OK. However, when I click Burn on the final screen, I get a message saying that the video will take some time to render (oddly, since I've chosen the option not to convert compatible files, and VS seems to be taking notice of this choice because if I de-select it, the video size on the disc indicator increases). If I click OK, the rendering process seems to start but it jumps to 3% and then nothing happens. It just sits there.
I thought maybe VS had a problem with the video, so I tried inserting it onto the timeline, and I can edit and output it from there without any problems. But, I can't burn it to AVCHD DVD without re-encoding it, which I don't want to do because it will reduce the quality of what is already a compatible file.
I have a custom tool palette all made up, it has three palette sets and 8-12 palettes per set.
Now, is it necessary to add the palette sets and palettes to the content browser before sharing the .atc file around the office? Also, once added to the content browser, I cannot change the properties of a block e.g. scale, layer, rotation prompt etc..
How to share custom projection files with multiple users? I created a custom projection for C3D on my computer, now I need to give it to several other people. Can't seem to find where this file is stored.
C3D - 2014,
i am getting some trouble when i want to convert my video (sharing process) after the treatment .the original video that i use is AVI format and when i want to share the video, i save it under AVI format too but the file that i got is bigger that the original one( and when i edited the movie i didn't add any new sequences).
View 3 Replies View RelatedI searched but could not find any paths for download.
View 5 Replies View RelatedI'm having a high resolution image (above 100 dpi) changing it's color settings after submitted to the web.
The image looks fine on the Desktop - and if saved using "Save for web..." dialogue the colors remains as deserved on the web as well.
Is there a way to save an image so the color preferences aren't distorted after publishing to the web, but without reducing to 72 dpi?
I use Photoshop CS4 and I shoot and edit my pictures in Adobe RGB 1998.
P.S. If I open Adobe RGB psd file and assign color profile to sRGB it changes to how my non-web-safe images look when uploaded to the web.
I have an image from a magazine that is 9" X 7.5" and want to scan it so that I can get the best resolution from it and be able to place it on a banner that will be 3ft X5ft.
In what format should I scan it ? JPEG, TIFF, or PDF
