i am getting some trouble when i want to convert my video (sharing process) after the treatment .the original video that i use is AVI format and when i want to share the video, i save it under AVI format too but the file that i got is bigger that the original one( and when i edited the movie i didn't add any new sequences).
View 3 Replies
I searched but could not find any paths for download.
View 5 Replies View RelatedI have done a lot of editing with VideoStudio Pro on current system but never ran into somthing like this:
I have a 2.7G file that I pulled from my DVR (mpg). Plays well on my ThinkPad but when I try to load it into VideoStudio Pro X3 (13.6.2.69) the software stops responding (get the "not responding" message) and I have to end the process.
I updated to SP3, no luck. Uninstalled and reinstalled VideoStudio, no luck. Search Corel and various boards and found nothing about file size being an issue. Even adjusted virtual memory settings.
I am new with X4 and with Corel software. I just want to ask you why I am unable to choose my custom resolution?
I try to share my video with MP4 format, and I am using custom settings but user defined resolution is not available.
I have a HD mov file. When I drag it into my timeline I don't get a message to match the project properties to the file type even with the correct preference. I understand that with the mov file type this doesn't work in X4 anyway. Anyway, after a bit of trimming I want to create a file with exactly the same specifications as the original.
I obviously cant use same as project settings option. For some reason I do not have the same as first clip option either. So how do I tell X4 to keep the original file properties when creating a new file?
A friend gave me a home movie on DVD asking me to add chapters and a menu. I imported his DVD content into VideoStudio and it appeared he had 24 chapters on his disk. To me they all looked identical so I deleted all but the first one and proceeded to make 3 chapters, add titles and transitions to the start of each chapter.
Then I went to Create Disk and added the menu but when it came time to burn a DVD, it says the file is 7gb. My DVD-r and the DVD the original files came from are 4.7 gb.
I recently purchased Corel Video Studio Pro X6. So far it has worked great except for one issue. When using it to make DVD's, the file take up far more room than the actual file size is.
I've converted old VHS tapes to .mpg files and I planned on using Corel to create DVD's, with menus, for my family. I ran into the issue of the files being far too big, so after some research I discovered that .mpg files were not size efficient. I then used Corel to convert them to .mp4 files. So now, for example, a file that was 1.06GB (.mpg) is no 70.7MB (.mp4). So on disc the files are considerably smaller, with little to no video/audio loss. But, once I opened up Corel and started a new project and tried to use the new smaller files they still take up just about the same amount of space on the DVD's. On my HDD all of the converted files take up the same amount of disc space as just a few of the original files. Yet on the DVD I can still only fit 3-4 videos.
I am using X4 editing in 16:9. The original files are MTS. The finished is rendered to MPEG2 (usually 1.65G-1.8G) which can be uploaded to YouTube. I want to also upload to blip.tv, which requires files smaller than 1.5G. What can i use to reduce the file size, yet keep the 16:9.
View 4 Replies View RelatedI've been a long-time VideoStudio user and recently installed the trial of X5 (my last purchased version was X2, but, it's time for an upgrade ). VS X5 is installed on a Windows 7 Ultimate 64-bit PC. If I capture to an internal NTFS drive, the tapes capture as a single ~19 GB AVI file; however, if I capture to my Linux NAS server with ReiserFS file system, VS breaks the captured files into 4GB chunks and I end up with five files per tape. There is no 4GB file limit on ResierFS. I have copied several 25+ GB blue-ray files to the NAS with no problem. ReiserFS has an 8TB file size limit. Captured through another video editing program, I do not have this problem. It appears that VS X5 assumes a 4GB limit on network devices (or, at least, on my Linux - ReiserFS NAS).
View 1 Replies View RelatedI'm working in VSX4. I've created a couple of small movies which I want to compile onto a single dvd. The video files from both movies combined only amount to about 3.2 GB, yet when I try to "share" and make the dvd with both of my vsp files, it adds up to be a total of over 7 GB. Is it normal to have this much "inflation" on a project? I've not done anything special as far as graphics or fancy menus or even chapter markers. It's just a handful of clips with the "crossfade" transition applied. And that's it.
View 14 Replies View RelatedI made a 8GB video in PAL sometime ago. Some of my relatives in Canada cannot view it. As I do not have the original footage, I imported the DVD into X3 and tried to create a DVD in NTSC format. The final size came to 9.3 GB and it appears X3 will not burn or create VIDEO_TS folders if the size is more than 9GB. I was hoping I could use DVDShrink to reduce the file size to fit a 8GB disc once the VIDEO_TS folder is created on the computer.
View 7 Replies View RelatedUsing Boxed VS ProX5, windows 7 home. VS seems to somehow shrink the file size when rendering and I am perplexed why.
For example, I edited a 2 1/2 hr project and hit the share tab to create a dvd 9.5 VS indicated that I was oversize for that size disc and I had to reduce the bit rate to compensate. (attempts to burn it oversized seem to produce errors at 99%). Based on my modified project settings, the colored bar at the bottom of the screen indicated that I was at the maximum end of yellow, and over 7 GB in size but my rendered iso image was only 6.2 GB. How does this happen? How can I create oversized DVD files? I prefer to "shrink" them in another program.
I recently bought a double-layer DVD burner and attempted to burn a DVD of a 2 hour home movie in Ulead VideoStudio 9, but have been unable to do so. I can burn it if I shrink the compression, but I don't want to lose quality - which is why I got the double layer burner in the first place. I know it's an older program, but I didn't think I would have so many problems trying to the double-layer disc to work. I have downloaded the upgrade patch for dual-layer burning from the web, but it still hasn't worked. When I burned just the image file (.iso) and tried to use another program to burn the disc, I noticed that it didn't finish saving the entire movie - it stopped when the file size reached 4.2 GB - which is right at the max for a single layer disc. How can I change the settings so the .iso image file will continue working/saving past the 4.2 GB since I can get close to 8 GB on a double layer disc? I'm missing about the last 10 minutes of my video - I need around 5.0 GB for the full movie.
View 14 Replies View RelatedI created a short project of two clips of 640 x 480 avi clips with no transitions in VideoStudio Pro X4. I created a media file output and chose the option "same as the first clip." The file created was about 39 MB. Everything was good.
Then I created a media file using the option "Project Properties" and the file size ballooned to about 354 MB, even though I set the Project Properties to the same values as the original clip!!
I need to use Project Properties. Otherwise, when I add transitions, during the transitions the video size changes to widescreen for some reason and the picture looks stretched out from left to right, until after the transition, when the video goes back to 640 x 480.
How can I use the Project Properties option when creating the final media file and not get huge files, or how can I use the "same as the first clip" option and keep the transitions the same size as the first clip (640 x 480) instead of switching to a wide screen mode?
difference between DVD 4:3 and DVD 16:9. How should I be saving my file if it is to be shown on 18" tv screens ? Or does how I save it depend on something to do with the photographs I have in the slideshow? Will saving it as 4:3 reduce the overall file size ? Or is there another way to reduce the file size so I can fit more onto a DVD? At the moment I can only fit just over an hour onto a 4.7gb DVD. video editing dummy that I am.
View 13 Replies View RelatedI realise there are pros and cons to this question and the temptation is to opt for the highest quality, but the file sizes are huge. So, my camera files will be mainly 1080 files at 30fps, what will be the best file type/size to save files for future use. I don't really mind the rendering time and space isn't a huge problem, but the variety of file types is bewildering. Most clips will find their way to DVD but I don't want to reduce resolution as they might be used at a later date for Blu-Ray.
View 1 Replies View RelatedWhen I render a large file with the output going to a mapped drive the output is cut into multiple files that are 2GB in size.
If I do it to a local disk it doesn't do this - it created the 13GB file, which I then have to copy to my network drive.
how to remove this limitation on network drives?
I am using 64 bit windows 7 and a NetApp NAS...
how to make my edited mp4 video files smaller so that They upload and download much quicker. I did some editing to some MPEG-4 video files and when I was finished I found out that the file sizes of each video blew up to huge numbers. During the editing I did add some transitions and .MPEG photo images. I didn't think that the video size would grow to that amount. I really would like to keep the MPEG-4 format for the convenience to the viewer. I just need to have it in the smallest file size possible. how I can get my "MP4 H264 - MPEG-4 AVC Resolution 640x480" videos to an acceptable file size?
View 8 Replies View RelatedI have videos from my camera at 1440x1080, and after I edit them on Videostudio x4, when I save them (using MPEG4HD or AVCHD for example), the resulting file size is larger than the original. So I decided to use an encoder such as Xvid for reducing the file size. I choose avi as the output format and then in the options I set the resolution to 1440x1080 (not listed in the standard combobox, btw) and choose Xvid as the encoder (also tried ffdshow). But the resulting video is a smaller picture with a big black border instead.
View 1 Replies View RelatedWhen first making the video in Edit mode, is there any way to see the final output size before or after selecting Create Video File before the file is created.
If I choose Create Disk it will show the output size.
If not what would the maximum running time be for DVD output?
I want a selection to persist between sessions, so I guess my only option is the filesystem.
What I do is as follows: create a selection, save it as a channel and then save the whole xcf file ( I learned elsewhere save it as a png but my 2.8 will NOT let me do that; the only way to save a png is via export). Then I close this file and open another one, then Open As Layers the file just saved hoping for my selection to appear in the Channels list, but obviuosly that will not happen. On the other hand if I open the former file standalone, the saved selection IS present.
We have centralized our content for our Revit users. We then customize the ini file to insure the paths look to the network locations.
One of my users has said that the proper and only recommended way to update the shared parameters file is while you are in Revit (I.E. have the path to the shared parameters file look to the network location instead of locally) so it updates on the fly. I didnt want to do that as I do not want to alter the "master" copy of the content we have on the network. I'd prefer that the user updates it locally, then we can just copy the file and overwrite the older file on the network.
I find nothing that says it is, but I prefer to explore all options and avenues first.
Using ObjectARX2013, I have to solve problems.
When I plot PNG or JPG file, its paper size is needed to edit according to drawing size.
I want to know the source code or function(or method) - C#.
is there a function in photoshop cs3 that will reduce the file size of a photo without affecting the physical size of it, i know macromedia fireworks can but thats no help to me unfortunately...
View 1 Replies View RelatedMy picture’s original size was 108.2 MB in tiff. After I developed my photo in Lightroom and exported the new image, the file decrease to 50MB in tiff. Why did Lightroom decrease the file size to more than half the original size? Is there a way to increase the exportation file size to that I may develop a large size print?
View 7 Replies View RelatedWhy is the image on the screen small the the actual file size. As an example I have an image thats 5.7x5.7 @72DPI. My canvas says 100% but the image on screen is about 3x3.
View 3 Replies View RelatedCan someone please explain to me about file sizes and image dimensions. I have to put together a collage which is 165mm high by 258mm wide. If I click file new and choose default resolution (72) then the file size is ok, if I type in 300 dpi the image becomes huge.
If i chosse 300 dpi then the images I was going to use seem tiny on such a vast workspace - Im confused why does the canvas become so large when changing resolution?
 When I save a file to jpeg the image size in photoshop remains the same as it was as a tiff file BUT according to the information that comes up in windows properties the file is much smaller (300k vs 2.9mg).  Can you advise me which is the correct file size?  If the correct size is the one showing in windows (300K) does mean that the file compressed in JPG and lost a lot of information?
 and if this is the case how can I prevent that from happening and still save the file as a JPG?  [ I would like the image to remain the size photoshop shows it to be] . Thank you very much.
Is there a way to automate repetitive actions such as file size and file saving to the same folder?
View 4 Replies View Relatedam having an Issue with CS6 when saving files. When saving a file using the 'Save' option (not 'Save As') the file is not staying at the size of the artboard as it should, it is however being aurtomatically cropped down to the actual artwork size. This is causing issues with the Process we work with as we need the file to stay at the artboard size.If I click 'Save As' and change the Adobe PDF Preset to 'Press Quality' then this works, however this means that every file we save(which is quite alot in a day) means we have to go through the 'Save As' option and manually change each save.why this has suddenly started to happen with our Illustrators and do you know how to fix this so that it stays at the Artboard size when 'Save' is used?
View 17 Replies View RelatedBackground info:
We got several image files every 2 weeks which should be edited and mainly reduced in size for web purpose. This work needs 1 work day for one man/woman to do, because he/she has to open the file save for web and then set the quality to a value were the file is nearly about 150-200 KB in size.
The images are different, some have few colors, some have a lot of colors and there are also different in resolution. But they should not be reduced in resolution, only in quality. All other specs of the image should be kept
Is there any possible script, plug-in or similar which can do the same (Saving with a specific max. file size) in some automatic and faster way?
