VideoStudio :: Best File Type / Size To Save Files?
May 20, 2012
I realise there are pros and cons to this question and the temptation is to opt for the highest quality, but the file sizes are huge. So, my camera files will be mainly 1080 files at 30fps, what will be the best file type/size to save files for future use. I don't really mind the rendering time and space isn't a huge problem, but the variety of file types is bewildering. Most clips will find their way to DVD but I don't want to reduce resolution as they might be used at a later date for Blu-Ray.
View 1 Replies
ADVERTISEMENT
Feb 8, 2012
I'm running Windows 7 64-bit.. There is no error message, it just says Corel VideoStudio X3 has stopped working... The video is only 48 seconds long (A test video) 1280x720 and was recorded at 30fps.
I have an NVIDIA GeForce GTS 250 Video Card and a 3.4GHz processor and 6GB of RAM
View 5 Replies
View Related
Dec 25, 2011
I have videos from my camera at 1440x1080, and after I edit them on Videostudio x4, when I save them (using MPEG4HD or AVCHD for example), the resulting file size is larger than the original. So I decided to use an encoder such as Xvid for reducing the file size. I choose avi as the output format and then in the options I set the resolution to 1440x1080 (not listed in the standard combobox, btw) and choose Xvid as the encoder (also tried ffdshow). But the resulting video is a smaller picture with a big black border instead.
View 1 Replies
View Related
May 25, 2012
Is there a way, when saving jpg files to save as a specific file size, rather than quality level (currently using CS5)? I have a few clients (realtors) who require files to be 100kb (or smaller... but 100kb is the ideal to shoot for) for their listings. Â
Given I'm working with a number of images, I would like to be able to do this as a batch, rather than one at a time, getting as close to 100 as I can without going over, as I have to at this point.
View 13 Replies
View Related
Dec 5, 2011
I'm working in VSX4. I've created a couple of small movies which I want to compile onto a single dvd. The video files from both movies combined only amount to about 3.2 GB, yet when I try to "share" and make the dvd with both of my vsp files, it adds up to be a total of over 7 GB. Is it normal to have this much "inflation" on a project? I've not done anything special as far as graphics or fancy menus or even chapter markers. It's just a handful of clips with the "crossfade" transition applied. And that's it.
View 14 Replies
View Related
Sep 12, 2013
I designed artwork for a large banner (84" x 32") so my AI artboard is that large. As you can imagine, with all the text and graphics I used, this file size is 22.8 MB. I need to email this art to the printer, but the file size is too large to email. How do i go about reducing the file size in AI so it still maintains large format print resolution? Will saving to a PDF lose the print quality?
View 7 Replies
View Related
Jan 23, 2013
I have Photoshop CS6 and Elements Premiere 11 and both were showing estimated file sizes properly up until a couple of weeks ago, and both stopped at the same time. Using Image, Mode I have verified on both that the images I am trying to save are 8 bit and not 16 bit images. I am on Window 7, 64bit.
View 9 Replies
View Related
Nov 29, 2005
I'm trying to figure out what file type/setting I should start saving my files as for printing. I want to have files that will give the highest quality when printing, but not take up any more space on my hard drive than necessary (I want to archive and be able to share the non psd files). What would you guys recommend? Are you losing anything by saving files as jpg? What about the difference between quality level “10” and “12” for jpg (since the file size doubles)?
View 8 Replies
View Related
Jun 24, 2012
When I save for the web, select my file type ( png,wbmp,jpeg) it displays the file type as a Gif in the lower left even though the file saves in the correct format. This is the version from the cloud download. Every file type displays this way?
View 4 Replies
View Related
Jul 13, 2013
OK - so i've done a little bit of an edit to a photo and just wanted to save it to a jpeg so i could use it in other stuff. I was just wondering where this function is?
I've attached an image of the options that are available to me when i select save as.
View 3 Replies
View Related
May 26, 2011
how to set the default save file type to 100% JPG every time starting at a named folder. What I am looking for is to hit save and it to have pre selected a particular folder / to have remembered the last folder I saved in, and without need to interact with dialog boxes have it save in my chosen format at the quality I want. (i will never need to re-edit).
View 1 Replies
View Related
Dec 27, 2012
Where can I turn on options on an image and get the file size and type?
View 4 Replies
View Related
May 4, 2010
When saving my created pictures i mostly choose JPEG save format, but the default type is PNG, Is there some setting to set the default to JPEG instead of PNG to avoid clicking on the choosing the desired file type under dropdown "Save as type" each time?
View 7 Replies
View Related
Feb 23, 2012
I’ve been using PAINT.NET, for a long time now.Today, I’ve created an account in the Forum, because I would like to ask, if possible and desirable for the Developers and the program Users, the following:
- make the default Tool - Rectangle Select;
- make the default save file type - JPEG (*.jpg;*.jpeg;*.jpe;*.jfif);
- allow the users to change the default workspace background color (now, Hex: #C9D3E2);
I have read the Rules and the FAQ.To finish I just would like to congratulate all of you, that have given us this fantastic piece of software (and for free)!
I believe it’s the best freeware software available, counting all types for software/utilities/add-ons, etc.
View 9 Replies
View Related
Jul 9, 2008
I want to use for an application's icon, and I was hoping that I could create the icon in PhotoShop Elements 6.I do not see any way to do this, however. That file-type option is not available in either "Save As" or "Export."
I did a Google search and saw where I would need to download a plug-in.
View 8 Replies
View Related
Jan 25, 2013
If I'm using the marquee tool to crop an image, how can I save the new cropped image as a jpeg file type rather than as a PSD, PDD file type?Â
View 2 Replies
View Related
Jun 27, 2011
I had a time where I shot some home videos on my old Sony DV camera (type2 DV 29.97fps) and also some on my other digital cameras of various models which recorded in mjpeg (20fps), h.263(30fps), mpeg4sp (29.97fps), and even a few .asp. I want to combine all these in chronological order on DVD. But I worried about which format to choose when rendering such a mixture, since I've heard that type 2 DV should be lower filed first. Will that mess up the way the other files are rendered? I was wondering if i should render the DV out to DVD compliant mpeg2 first and then add in the others in another project.
View 2 Replies
View Related
Jun 18, 2013
am having an Issue with CS6 when saving files. When saving a file using the 'Save' option (not 'Save As') the file is not staying at the size of the artboard as it should, it is however being aurtomatically cropped down to the actual artwork size. This is causing issues with the Process we work with as we need the file to stay at the artboard size.If I click 'Save As' and change the Adobe PDF Preset to 'Press Quality' then this works, however this means that every file we save(which is quite alot in a day) means we have to go through the 'Save As' option and manually change each save.why this has suddenly started to happen with our Illustrators and do you know how to fix this so that it stays at the Artboard size when 'Save' is used?
View 17 Replies
View Related
Oct 8, 2013
I have an Adobe Illustrator CS6 document with body copy set using 6.5 pt. Helvetica Neue LT Std. - Bold Condensed & Light Condensed.
Â
After saving the file as a PDF in Illustrator using the [Smallest File Size] setting, closing the file, and opening the newly saved PDF in Illustrator - the 6.5 pt. text is now 5.53 pt. with a vertical scaling of 117.65%.
Â
This PDF is for client review purposes - on screen or laser print - not for reproduction. We try to keep the file size as small as possible to make downloading and e-mail attachments manageable.
Â
In this case, my client is opening the PDF in Illustrator to double-check the text point sizes for legal & regulatory purposes.
If I save the same Illustrator file as a PDF using other settings like [High Quality Print], the text size is unchanged.
Â
 I was able to repeat the issue using Helvetica LT Std in place of Helvetica Neue LT Std.
Â
I have attached some screen shots for reference.
Â
Illustrator Source screen shot
Acrobat PDF screen shot
I found this older thread from 2011 where someone had the same issue - but was never resolved: [URL] ....
View 1 Replies
View Related
Oct 8, 2011
I thought the best way to construct my video would be to 'cut' out all the sections of video I wanted to use, and save them in the library. When I had them all, I could then bring them down to the timeline where each needed to go. The videos I am working from are 512x288, and when I try to use the 'save trimmed video' function, it comes back saying my frame size is not per the settings.
I haven't seen a way to make the project accept a different frame size, that option is grayed out under preferences. Is there a way for me to cut out the sections I want and save them individually?
View 4 Replies
View Related
Jul 9, 2011
I joined two video clips and saved them as a single clip. They are both .mov files. One is 18mb and the other is 15mb, so I assumed the new file would be 33mb. When I save the new file in .mpg, however, it is only 27mb. When I try saving it in .mov, it balloons to over 120mb. How should I save the new clip to maintain the original size and ensure I'm not losing any quality?
Also, when I save the clips it seems to be converting the original 640*480 aspect ratio to 720*480. How do I preserve the original aspect ratio?
View 8 Replies
View Related
Nov 11, 2013
How to I simplify the list of file types in the Save-As file type list? I use less than six file types. I have no need for most of these. It would be nice to have my top 5 and then the ability to go off-menu if needed for others.
View 6 Replies
View Related
Jul 8, 2012
i can't open any file type except .png files.i think cause is from libjpeg and when i compile gimp didn't install and i has to compile with --disable-jpeglib or like this switch.
View 3 Replies
View Related
Jun 20, 2013
I recently upgraded to Photoshop Elements 11 and seem to have lost the ability to work with NEF files. Everytime I try to "get files" from my computer in eithr the Organizer or Editor I get the error message thht this type of file is not supported. What's up? Where do I go?
View 11 Replies
View Related
Dec 31, 2013
When I try to open files - ANY files - I get an error message that AI doesn't recognize the file type. I tried importing files and received the same message. I then went back and attempted to open files that I had created with AI. NO FILES will open. I tried re-installing the program, still no dice.
View 16 Replies
View Related
Feb 4, 2013
I have recently bought a Canon 650D and I am now unable to load CR2 Raw files in to Elements 10 for editing-it is coming up with a message "Cannot open ....... CR2 because it is the wrong type of file. I have not had this problem before.
View 12 Replies
View Related
Jan 8, 2014
I uploaded some photos from my phone onto my laptop. These seem to have disappeared altogether. They are no longer on my phone, they are not in any of the folders on my laptop (I have checked several times) and they are not in my laptop recycling bin either. Since this happened, I have notcied the appearance of many LRPREV files on my laptop, which I cannot open and I have not seen before. Putting 2 and 2 together, I am inclined to believe that the lost uploaded photos from my phone are the LRPREV files, and that they were somehow, unintentionally converted.
Â
What are LRPREV files, and how do I open them? Alternatively, is there a way to convert them into a file type which I can open? where my uploaded photos may be?
View 1 Replies
View Related
Aug 18, 2012
Tif files when cropped and save as, seem to double in size. The crop tool is set at Unconstrained and the value boxes are empty.
Â
e.g - Original 16bit Tif was 228.96 MB, 7304px x 5478px @ 300dpi, once cropped down to 7304px x 2390px @ 300dpi and saved as becomes 405.21 MB.
Â
Using photoshop CS6 extended and OSX 10.7.4.
View 1 Replies
View Related
Mar 14, 2012
In playing around with some settings while saving a .png file, I noticed some weird results. For this example, the original image is 300 x 300, but I want the final size to be 200 x 200. I get different results depending on the order I perform the following operations (I never thought the order mattered until now).
Â
1. start with 300 x 300 image, choose save for web, select png-24, with transparency, white matte, convert to sRGB, change image size to 200 x 200, then save - the file size is 37kb.
2. start with 300 x 300 image, use Photoshop's "image size" to change to 200 x 200, then save for web, etc - the file size is 111kb
Â
So depending on which step I resize the image, the file size is significantly different - if I resize BEFORE using save for web, the file size is much larger. This is just weird to me, but I always resize AFTER choosing save for web, so that's why I've never caught this until now. In case you ask, while using Photoshop's "image size", all three options are checked at the bottom of that window, so nothing is getting re-sampled or anything like that.
Â
The only thing I can think of is each of those methods treat pixel data differently when reducing the dimensions. When I overlay both exported .png files on top of each other, I see no difference in pixel quality and/or color shift - so why the big difference in file size? if I just save the file straight to .png, the sharpness is much better, and the file size is 46 kb. I did notice when saving for web, the colors become a little more saturated.I've never really paid much attention to the results when exporting .png's.
View 17 Replies
View Related
Aug 13, 2013
IN Illustrator cc how do you save a stoke size in that file. It reopens at 1pt and i want it to open at 0.001
View 2 Replies
View Related
Feb 13, 2011
I have done a lot of editing with VideoStudio Pro on current system but never ran into somthing like this:
I have a 2.7G file that I pulled from my DVR (mpg). Plays well on my ThinkPad but when I try to load it into VideoStudio Pro X3 (13.6.2.69) the software stops responding (get the "not responding" message) and I have to end the process.
I updated to SP3, no luck. Uninstalled and reinstalled VideoStudio, no luck. Search Corel and various boards and found nothing about file size being an issue. Even adjusted virtual memory settings.
View 6 Replies
View Related
