I have been using Video Studio Pro 4 and was always able to insert, play and record to dvd the MOV file format. All of a sudden I am getting an VS 4 will not let me add Mov files to the time line.
View 4 RepliesI've been creating video files in Pro X5 to upload to Vimeo. They are fine but I wondered if I could create a better quality format to watch on my laptop e.g. in terms of Kbps etc. The files are:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
They are created from source files which are:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
What would be the best format quality for a laptop? I tried 20,000 Kbps and 256 Kbps sound for the heck of it but the laptop struggles to play them.
How to render HD 1920 x 1080 video clips into the .mov, 1080p format required by my stock agency. I've gone into Share>Create Video File>Custom>Quicktime Movie Files>Options>General... but I am unable to find a 1920 x 1080 option. 800x600 is the highest setting with the default being 720x480. I'm using VS Pro X4 and also tried X2.
Original clip info for one camera: Type H.264, 24 bits, 1920x1080p, 16:9, 59.94fps Vari. bit rate 26,000
I have footage in the following format which I'd like to upload to Vimeo (it was shot on a basic home camcorder some years ago). What would be the best format? I have VideoStudio Pro X5 trial version.
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 4:3, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
The Share - Upload to Web - Vimeo MPEG-4 4:3 option gives you:
MPEG-4 Files
24 bits, 640 x 480, 25 fps
Frame-based
H.264 Baseline Profile Video: 2500 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
Is this OK? Vimeo said they pillarbox all SD videos (ie. smaller than 1280x720) in order to fit them into their standard player so should I do the Vimeo HD 16:9 option for instance?
It gives you:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
I created a 4 minute video project in VS Pro X3. Source of video clips were from a Sony HDR-CX550V camcorder. I added some titles to a few video clips and 3 titles on a "Graphic - Color" background. When creating a video file (under SHARE) and choosing Blu-ray ----> NTSC MPEG2 (1920 x 1080), I found the following: Video clips are sharp, no problem, but the titles have black lines at irregular intervals, to the point that the letters cannot be read. What may be the cause and how can I eliminate this problem.
View 4 Replies View RelatedGiven that it seems to be a good idea to render VSP projects to a single video file before attempting to create a DVD through Share Create Disc, I am wondering what is the most optimal type of video file to initially render the VSP into.
The video from my camera comes in a ACVHD 1080/60i. My target final disc is either 1) standard DVD, or 2) Blu Ray. I have been rendering the VSP into a 1920x1080 AVCHD format.
What's the best format to use when transferring VHS tapes to my p.c? I've tried AVI but an average tape takes up to 400Mb on my hard drive which seems excessive. The VHS tapes mainly have films and documentaries the majority of which will be deleted once I've watched them on my PC.
View 2 Replies View RelatedFirst, some glitches (short freeze frame) at video transitions. Usually at the end of the transition. I could upload some samples... The problem persist in both : hardware or software accelerated mode.
Also, when i want to create a video file and i use the "same as first video clip" even the project is a HDV 1440x1080 format, the video is created as DVD 720x576 4:3 aspect.
I'm using Video Studio Pro X2 on XP.
I have a personal website and upload video files for people to download. My videos are around 45-60 mins long and I save them using MPEG optimizer usually, resulting in file sizes of around 2GB. These files take a long time to download, and I have to upload them overnight. I've downloaded video files of around 60 mins in duration from other sites which have been only 500MB in size. These tend to be WMV files 25bit with frame size around 640 x 480 and bit rate of around 1122fbps, frame rate 25fps.
Is this the best format for achieving a compromise between quality and file size? The WMV options un custom are much smaller frame sizes, where can I find the right option? Is there a better format available in the custom menu?
I have made a project last night. and when I was gonna save it, it was written that video studio only save file as *VSP. I want to know how to save the project as a video format for example as *WMV or something like that.
View 2 Replies View RelatedHow do I export my video to 720p mp4 file format?
I can't find the option. In fact I can't find many options. The custom settings are not very custom really as the choice is very limited or none.
Is there any way that i can convert a video into the jpg format using Video Studio 10+ or Photo Impact 11 ?
( that is apart from the " save as image " in Studio) Like a batch convert job.
Or perhaps a freebie converter out there.
I am new with X4 and with Corel software. I just want to ask you why I am unable to choose my custom resolution?
I try to share my video with MP4 format, and I am using custom settings but user defined resolution is not available.
I own VS 12, and when I work with HDV footage, I'm able to create an HDV video file either with MPEG optimizer or Same as first video clip. The project smart renders and I get HDV file. I've downloaded VS 15 trial as a test, as it has some additional features I'm interested in. However, with the VS 15 trial, following the same steps produces a file formatted as NTSC DVD 4:3 and no smart render. Am I missing something or is this a bug/limitation of the trial? Corel says the trial is fully functional. I'm running Windows 7 Pro 64 bit i5 4 GB ram. I even tried installing the VS 15 trial on my old XP laptop and had the same issue.
View 2 Replies View RelatedIn order to create a video file in the AVCHD 1920X1080 format, I have the following options in the VSP X6:
AVCHD (1920X1080)
AVCHD (1920X1080, 24P)
AVCHD (1920X1080, 25P)
AVCHD (1920X1080, 50P)
What is the differences between those formats, so I don't know what to choose. My original clips are 25 frames/sec, does it means that I have to choose the 25P?
I'm creating video clips in Corel Video Studio X4 Ultimate (Education),for use in creating multimedia PDFs with Adobe Acrobat X Pro.
The formats Adobe Acrobat says is accepts include MPEG 4 / H.264,so in Corel Video Studio X4 I've tried selecting the following types of output file:
1) "MPEG4: iPhone H.264 (640 x 480)" My preferred resolution, but Adobe Acrobat won't accept it, apparently because it's "Sony PSP" (according to an analysis by MediaInfo), not supported by Flash, according to an advisor on the Adobe forums.
2) "MPEG4: iPod H.264" (320 x 240) This is accepted by Adobe Acrobat, even though it's also Sony PSP (according to MediaInfo). But this isn't enough resolution for my purposes.
3) "MPEG4: iPhone 4/iPad HD" This is also accepted by Adobe Acrobat, but the resolution is too high (1280x720) as the files are too large.
I have a h.264 video file in .m2ts format, captured using a TV card, and I want to burn this to an AVCHD DVD. I've been trying to do this with VSX4. I don't want the video to be re-encoded because it's already in a suitable format. If I open X4, and then Create Disc and insert the video, the video plays fine and everything looks OK. However, when I click Burn on the final screen, I get a message saying that the video will take some time to render (oddly, since I've chosen the option not to convert compatible files, and VS seems to be taking notice of this choice because if I de-select it, the video size on the disc indicator increases). If I click OK, the rendering process seems to start but it jumps to 3% and then nothing happens. It just sits there.
I thought maybe VS had a problem with the video, so I tried inserting it onto the timeline, and I can edit and output it from there without any problems. But, I can't burn it to AVCHD DVD without re-encoding it, which I don't want to do because it will reduce the quality of what is already a compatible file.
I have used a pc from the 1980s and never bothered much about formally backing up relying on saving to disk for important piccies etc. I have had several computer crashes over the years and merely reinstalled all. My problem is now this: I have recently taken on the job of official film-maker for a local club and so feel I should have some formal backup in place, for fear of losing my project file mid-stream before completion! backup prog particularly for Video work? I believe the opposition incorporate a back up prog into their software but I don't want to move away from Corel.
View 5 Replies View RelatedI added in the VideoStudio one soundtrack and few video clips but the problem is that when I play project I can see only video clips without soundtrack or hear soundtrack without seeing video clips. What should I do to get soundtrack and video clips together played?
View 7 Replies View RelatedI bought a new computer (Dell E5520 laptop with Windows 7) and transfered all my programs/data; Video Studio Pro X4 wouldn't work - would not capture video. I un-installed the program. When I try to install VS ProX4 on my new computer from the disc I get a small blank window and a flashing diaglogue box pops up so quickly I can't read it. I have run virus scans and removed all identified threats. I am running a Intel Core i5, have 4GB Ram and 500GB disk. Installation and operations were great on my old system running XP.
View 2 Replies View RelatedI recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies View RelatedI have a few MOV format videos that I need to rotate and re-save with PS CS6. I've never tried video editing with Photoshop, and this must be the most basic of basic starts in my next career as a film producer. I assume I just go to Image > Image Rotation as one does with image files? Then when I export the video, and select QuickTime MOV format, the resulting file does not actually have any video in it -- only audio. And despite having no video apparently, the file size is huuuge.
I have QuickTime viewer installed, but do not have a licence for QuickTime full version. Is that it?
Shall I just export to mp4 and be done with it? I would prefer to be consistent... so that I have all MOV files (I won't have to rotate / edit all video files, only some).
I have a lot of .mts videofiles I would like to wrap into one big file in cs6. What format/container should I use to store lossless, or will there always be a loss in picture quality when storing files in cs6?
View 7 Replies View RelatedI am trying to design a vector text-based logo using Adobe Illustrator. Now I have already purchased a font from MyFonts.com which was of type Windows/Mac OS X TTF and Windows PostScript. However when I used this in Illustrator I felt that it was not of a very good quality (Mostly when zooming out the font looked very pixilated).
View 2 Replies View RelatedWhen I wish to deliver the look of the anamorphic format, but have source video shot in the 16:9 (1.78) format, what is the best method to convert it?
So far, I have read that one can imply add the letterbox bars on the top and the bottom to simulate the visual part to be in the 2.39:1 format. I now realise, that even though visually it is the 2.39:1 format, the actual footage is still the original 1.78 format, just with black at the top and the bottom of the frame.
If that is okay, should one then notify film festivals and other alike that the footage is in the 1.78 format for them to project it correctly. On the other hand, should one render only the visual part of 2.39 and then also notify them that the format is 2.39?
i edit video tutorials in Photoshop CS6. The voice is on its own mono audio track. The voice track will be cut multiple times within Photoshop to adapt to the ongoings in the video. After editing the audio track in Audacity (or sometimes Audition) i wonder which file format i should use for the audio – so that i can import it and easily cut it in Photoshop CS6.
I used MP3 192 kBit, but it seems that sometimes i cannot exactly mark the millisecond where i want to cut. The marker bar jumps around and I get uncontrollable results. Of course this can be a general cache problem, but i wonder if there is a certain audio file format that's best to edit (file can be uncompressed and large). I do make long pauses in speech in order to get more easily cuttable tracks.
If i use MP3, is VBR more difficult to edit? Should it be another file format altogether? Photoshop CS6 imports these audio file formats:
AAC, M2A, M4A, MP2, MP3, WMA, WM,
some of which can't be written with the audio softwares i use.
In making a slideshow the default format appears to be .wmv. I have devices that do not recognize either .wmv files or the release that is used in Elements 11. Can I choose to save my slideshow as a .mp4 or .avi format directly from Elements 11?
View 1 Replies View RelatedI am a recent convert to Adobe NLE systems coming from FCP 7. My question is: What is the highest quality codec that I can use successfully with AME and Premiere Pro CC?
I’m working on a project that is targeted to screen in theaters (festivals) so I want to finish with the best possible quality. My source was film telecined to Apple FCP Uncompressed 10-bit 4:2:2, 1920 x 1080, Millions, Data rate 1060.67 mbits/sec. However, that format is too unwieldy for editing. When using FCP for previous films, I transcoded those uncompressed files to ProRes 422 (HQ) for editing and for theater screenings.
I see that i can use ProRes with Premiere, with a little work. if he/she recommends a better non-quicktime format for editing and projecting?
I am an Adobe Creative Cloud subscriber and am using AME CC (version 7.2.0.43) and Premiere Pro CC (ver 7.2.1). I have installed all suggested updates. I’m running OSX 10.9.1 on my 2011 imac (core i7 with 32 GB of RAM). My graphics card is a AMD Radeon HD 6970M 2048 MB.
I scanned some images to Tiff format and when I bring them into Gimp I can't seem to get the threshold effect to work. The other color effects work but not threshhold. I check with other Tiff images I have and they work but not for this new set (done on a different scanner).
View 1 Replies View RelatedI have received a request to convert an Adobe Edge Animate animation output to a video format such as .mov
View 2 Replies View Related