I have a few MOV format videos that I need to rotate and re-save with PS CS6. I've never tried video editing with Photoshop, and this must be the most basic of basic starts in my next career as a film producer. I assume I just go to Image > Image Rotation as one does with image files? Then when I export the video, and select QuickTime MOV format, the resulting file does not actually have any video in it -- only audio. And despite having no video apparently, the file size is huuuge.
I have QuickTime viewer installed, but do not have a licence for QuickTime full version. Is that it?
Shall I just export to mp4 and be done with it? I would prefer to be consistent... so that I have all MOV files (I won't have to rotate / edit all video files, only some).
I create short videos using the PS frame animation panel. I used to be able to FILE-export-render video- and choose MPEG-4 Video in the settings panel which would render my file into a small .mov file. Now in CS6 the new render video panel does not have that option. I tried the QT options in the export window and my file is hugh! The H.264 option gives me an .mp4. I put the .mp4 into my web page via Dreamweaver and my video does not play when uploaded into the sever. The video plays fine in Dreamweaver before I upload to the server. After I upload to the server I just get a Q and no video on my web page. If I render the same file in CS5 I am able to view it in my web page. ADOBE WHY DID YOU CHANGE YOUR EXPORT VIDEO RENDERING OPTIONS in CS6?
I have a lot of .mts videofiles I would like to wrap into one big file in cs6. What format/container should I use to store lossless, or will there always be a loss in picture quality when storing files in cs6?
i edit video tutorials in Photoshop CS6. The voice is on its own mono audio track. The voice track will be cut multiple times within Photoshop to adapt to the ongoings in the video. After editing the audio track in Audacity (or sometimes Audition) i wonder which file format i should use for the audio – so that i can import it and easily cut it in Photoshop CS6.
I used MP3 192 kBit, but it seems that sometimes i cannot exactly mark the millisecond where i want to cut. The marker bar jumps around and I get uncontrollable results. Of course this can be a general cache problem, but i wonder if there is a certain audio file format that's best to edit (file can be uncompressed and large). I do make long pauses in speech in order to get more easily cuttable tracks.
If i use MP3, is VBR more difficult to edit? Should it be another file format altogether? Photoshop CS6 imports these audio file formats:
AAC, M2A, M4A, MP2, MP3, WMA, WM,
some of which can't be written with the audio softwares i use.
In making a slideshow the default format appears to be .wmv. I have devices that do not recognize either .wmv files or the release that is used in Elements 11. Can I choose to save my slideshow as a .mp4 or .avi format directly from Elements 11?
I have to send a company a photo in RGB format - I can convert it from JPEG to RGB, but can not get it to export out of Photoshop Elemement 11 - Also I really am not sure what RGB is, perhaps I don't need to know - I got a file onto my desktop that I believe was saved as RGB, but can not remember how I did it? Also can I share from Photoshop Elements 11 to other sites such as Istock or FB?
I've been creating video files in Pro X5 to upload to Vimeo. They are fine but I wondered if I could create a better quality format to watch on my laptop e.g. in terms of Kbps etc. The files are:
They are created from source files which are: PAL (25 fps) Microsoft AVI files 24 bits, 720 x 576, 16:9, 25 fps Lower Field First Matrox DV/DVCAM -- type 2 PCM, 48.000 kHz, 16 Bit, Stereo
What would be the best format quality for a laptop? I tried 20,000 Kbps and 256 Kbps sound for the heck of it but the laptop struggles to play them.
How to render HD 1920 x 1080 video clips into the .mov, 1080p format required by my stock agency. I've gone into Share>Create Video File>Custom>Quicktime Movie Files>Options>General... but I am unable to find a 1920 x 1080 option. 800x600 is the highest setting with the default being 720x480. I'm using VS Pro X4 and also tried X2.
Original clip info for one camera: Type H.264, 24 bits, 1920x1080p, 16:9, 59.94fps Vari. bit rate 26,000
I have been using Video Studio Pro 4 and was always able to insert, play and record to dvd the MOV file format. All of a sudden I am getting an VS 4 will not let me add Mov files to the time line.
This is not a specific Photoshop question, but a general, portable graphics format -- not for web page display, but for sharing with different graphics designers, who might be using different graphics editors PhotoShop, PaintShopPro, GIMP, etc. A format that preserves layers, vector graphics, etc., for editing.
Is there any general, standard format that preserves all these editing features but is portable between most sophisticated graphics editors?
I have footage in the following format which I'd like to upload to Vimeo (it was shot on a basic home camcorder some years ago). What would be the best format? I have VideoStudio Pro X5 trial version.
PAL (25 fps) Microsoft AVI files 24 bits, 720 x 576, 4:3, 25 fps Lower Field First Matrox DV/DVCAM -- type 2 PCM, 48.000 kHz, 16 Bit, Stereo
The Share - Upload to Web - Vimeo MPEG-4 4:3 option gives you: MPEG-4 Files 24 bits, 640 x 480, 25 fps Frame-based H.264 Baseline Profile Video: 2500 Kbps 44100 Hz, 16 Bit, Stereo MPEG AAC Audio: 128 Kbps
Is this OK? Vimeo said they pillarbox all SD videos (ie. smaller than 1280x720) in order to fit them into their standard player so should I do the Vimeo HD 16:9 option for instance?
It gives you: MPEG-4 Files 24 bits, 1280 x 720, 25 fps Frame-based H.264 Main Profile Video: 5000 Kbps 44100 Hz, 16 Bit, Stereo MPEG AAC Audio: 128 Kbps
I created a 4 minute video project in VS Pro X3. Source of video clips were from a Sony HDR-CX550V camcorder. I added some titles to a few video clips and 3 titles on a "Graphic - Color" background. When creating a video file (under SHARE) and choosing Blu-ray ----> NTSC MPEG2 (1920 x 1080), I found the following: Video clips are sharp, no problem, but the titles have black lines at irregular intervals, to the point that the letters cannot be read. What may be the cause and how can I eliminate this problem.
Given that it seems to be a good idea to render VSP projects to a single video file before attempting to create a DVD through Share Create Disc, I am wondering what is the most optimal type of video file to initially render the VSP into.
The video from my camera comes in a ACVHD 1080/60i. My target final disc is either 1) standard DVD, or 2) Blu Ray. I have been rendering the VSP into a 1920x1080 AVCHD format.
What's the best format to use when transferring VHS tapes to my p.c? I've tried AVI but an average tape takes up to 400Mb on my hard drive which seems excessive. The VHS tapes mainly have films and documentaries the majority of which will be deleted once I've watched them on my PC.
First, some glitches (short freeze frame) at video transitions. Usually at the end of the transition. I could upload some samples... The problem persist in both : hardware or software accelerated mode.
Also, when i want to create a video file and i use the "same as first video clip" even the project is a HDV 1440x1080 format, the video is created as DVD 720x576 4:3 aspect.
I have a personal website and upload video files for people to download. My videos are around 45-60 mins long and I save them using MPEG optimizer usually, resulting in file sizes of around 2GB. These files take a long time to download, and I have to upload them overnight. I've downloaded video files of around 60 mins in duration from other sites which have been only 500MB in size. These tend to be WMV files 25bit with frame size around 640 x 480 and bit rate of around 1122fbps, frame rate 25fps.
Is this the best format for achieving a compromise between quality and file size? The WMV options un custom are much smaller frame sizes, where can I find the right option? Is there a better format available in the custom menu?
I have made a project last night. and when I was gonna save it, it was written that video studio only save file as *VSP. I want to know how to save the project as a video format for example as *WMV or something like that.
When I wish to deliver the look of the anamorphic format, but have source video shot in the 16:9 (1.78) format, what is the best method to convert it?
So far, I have read that one can imply add the letterbox bars on the top and the bottom to simulate the visual part to be in the 2.39:1 format. I now realise, that even though visually it is the 2.39:1 format, the actual footage is still the original 1.78 format, just with black at the top and the bottom of the frame.
If that is okay, should one then notify film festivals and other alike that the footage is in the 1.78 format for them to project it correctly. On the other hand, should one render only the visual part of 2.39 and then also notify them that the format is 2.39?
I have to transfer my auto cad plans to Photoshop. Im trying to export each layer into eps format and then open in Photoshop. But some layers are not showing up... What should i do?
I own VS 12, and when I work with HDV footage, I'm able to create an HDV video file either with MPEG optimizer or Same as first video clip. The project smart renders and I get HDV file. I've downloaded VS 15 trial as a test, as it has some additional features I'm interested in. However, with the VS 15 trial, following the same steps produces a file formatted as NTSC DVD 4:3 and no smart render. Am I missing something or is this a bug/limitation of the trial? Corel says the trial is fully functional. I'm running Windows 7 Pro 64 bit i5 4 GB ram. I even tried installing the VS 15 trial on my old XP laptop and had the same issue.
What is the differences between those formats, so I don't know what to choose. My original clips are 25 frames/sec, does it means that I have to choose the 25P?
I am a recent convert to Adobe NLE systems coming from FCP 7. My question is: What is the highest quality codec that I can use successfully with AME and Premiere Pro CC?
I’m working on a project that is targeted to screen in theaters (festivals) so I want to finish with the best possible quality. My source was film telecined to Apple FCP Uncompressed 10-bit 4:2:2, 1920 x 1080, Millions, Data rate 1060.67 mbits/sec. However, that format is too unwieldy for editing. When using FCP for previous films, I transcoded those uncompressed files to ProRes 422 (HQ) for editing and for theater screenings.
I see that i can use ProRes with Premiere, with a little work. if he/she recommends a better non-quicktime format for editing and projecting?
I am an Adobe Creative Cloud subscriber and am using AME CC (version 7.2.0.43) and Premiere Pro CC (ver 7.2.1). I have installed all suggested updates. I’m running OSX 10.9.1 on my 2011 imac (core i7 with 32 GB of RAM). My graphics card is a AMD Radeon HD 6970M 2048 MB.
I have some fotos that are apparently too small for the 1920 x 1080 format of my film.
What do I need to master about the relationship between three items (canvas size, image size, and document size) so that I can smoothly resize a bunch of images in Photoshop for export into Premiere Pro in that 1920 x 1080 format?
I will be constraining my proportions... if the images are too big, I will do a Ken Burns "zoom out" effect in the film.
Resolve the problem with export to PLT format? Since one day my X5 starts export objects larger than they are to PLT. Ex. text which should be 200mm wide is in PLT 250mm.
I am trialing the DG&P of xara. I am creating embroidery files in another software. I need to import in .emf. Most of my clipart, etc that I use is jpeg or png. I am wanting to take those into a program, create the vector file, and import to the embroidery software so that I can manipulate/simplify how I need to to create the stitch out. So, when I am in xara and I bring the image in, I select all and choose export in the .emf format....I figured that out. But, when I bring it into the other software I have a blank page. So, I figure I am missing something. Is there a quick way to convert the outline I bring in (in png) to vectors so that it can export and be manipulated in the other software in .emf? or do I trace the file in xara as I would in the other software, have a rough sketch, and then export? Where is the best info on what to do? I am pretty good at following tutorials and lessons but before I buy I just want to make sure it does what I am wanting it to do.
