Illustrator :: The Application Failed To Initialize Properly (0xc000001d)
May 13, 2013I cannot open Illustrator CS6. I get this error. How do I proceed?
View 3 Replies
ADVERTISEMENT
Photoshop :: CS5 / This Application Has Failed To Initialize Properly ( 0xc000001d)
Aug 23, 2012it openes a dialog box that read: this application has failed to initialize properly ( 0xc000001d). click ok to terminate program
View 5 Replies View Related3ds Max :: Error / The Application Failed To Initialize Properly (0xc0000005)
Feb 8, 2012when i run 3dsmax 2012 it tell me "the application failed to initialize properly (0xc0000005)"
View 2 Replies View RelatedPaint Shop Pro :: XI Error Messages - Application Failed To Initialize Properly
Apr 25, 2013I just recently started having problems with my PSP Photo XI program on my laptop. The other day it would start up and run normally, but the next day when I went to run the program, it wouldn't start. My computer would freeze up and show this error message: "The application failed to initialize properly (0xc0000006). Click OK to terminate the applicaion."
I tried turning off my computer and running the program again, but the same thing came up. I tried to run the repair program on it, nothing. I even tried to uninstall PSP XI to no avail as I got a different error message: "Internal Error 2328 C:Program FilesCorelCorel Paint Shop Pro XICoreErrorCodesRC.dll"
I really don't know what to do, short of just completely resetting my laptop back to factory settings and starting fresh. But even then I don't know if that would fix the problem.
I wish I knew why the program decided to just stop working one day, as I haven't downloaded anything and my anti-virus is up to date.My computer is a Dell XPS M1710, and it runs Windows XP SP3.
AutoCAD Inventor :: VBA Failed To Initialize Properly
Sep 16, 2013I have the student version of Inventor 2014 installed on my computer. My O/S is Windows 7 Ultimate 64 bit. I have installed and reinstalled Microsoft Visual Basics three times. But, I am still getting the error "VBA failed to initialize properly".The program was working fine for about a week with no errors reported. Now, every time I try to start a tutorial I get this error.
View 5 Replies View RelatedPhotoshop :: CS6 Failed To Initialize When Trying To Install
Dec 1, 2012i get this really weird bug when i try to install photoshop cs6
PDapp here [URL]
I tried to remove an old version with Revo uninstaller, and when trying to install that one after, it just did that
Theres the error, in Danish though, but it says:"An error occurred the installationsprogram could not be initialized, Download Adobe support advisor to register the problem"
The problem is, i have downloaded it, but it does not fix it..
Photoshop :: Failed To Initialize Cooltype?
Oct 25, 2012I had to get a new hard drive on my Mac and I backed everything up and reinstalled it all when I got it back. Photoshop is the only thing not working now. I try to open it and get this message:
Could not initizlize Photoshop failed to initialize cooltype. I've read and read and tried everything is could on this[URL]... and I also uninstalled and reinstalled it twice and still I get this message.
Photoshop :: Installer Failed To Initialize
Jan 19, 2013i download photoshop but then when i was installing the program, the installer failed to initialize. I downloud Adobe support advisor but it did not find any problem.
View 1 Replies View RelatedAutoCAD Inventor :: VBA Failed To Initialize
Jul 18, 2013after installing Excel 2013 I can not open anything in Inventor."VBA failed to initialize... Please restart inventor".I uninstalled Excel.
I re-installed Inventor.
I reinstalled vba6.msi.
Still running in this error!
System: Win 8 - Inventor 2014 - Excel 2013
VideoStudio :: Pro X4 Cannot Initialize Application?
Apr 1, 2011I'm trying to run the trial version of VS Pro X4 after picking up a disc at Focus on Imaging at the NEC in Birmingham. I've trioed installing it on two different PCs and get the following message on both: Cannot Initialize Application Invalid Parameter [16345:1:1] [15034:1:32]
I was very impressed with the demo at the NEC and am keen to buy, but not if it's going to misbehave.
Photoshop :: Failed To Initialize CoolType - CS6 Crashes Upon Launch
Jun 1, 2012Could not initialize Photoshop failed to initialize CoolType..... photoshop cs6, upon launch.. crashes with this error..
View 3 Replies View RelatedVideoStudio :: Error / Failed To Initialize Video Capture Plugin
May 1, 2012After not having much luck with the last video card, I changed my video card to a device with the Philips 713x chipset
Now when I select video capture I get the following message:
failed to initialize the video capture plugin
Open driver failed
(15200:43:0)
(15023:4:2)
cannot create the video capture filter
I have just installed card (SAA7130 TV PCI card) with latest drivers excluding the software so Video Studio 12 pro is the only capture software on the machine . I also re-installed both card and Video Studio after doing a complete system restore and used CC cleaner to remove any residual data before re-installing.
I need to use video capture within the Video Studio software as I need to use the scene detection functionality.The reason I had to change the card in the first place is that video studio only allowed me to capture in AVI 320x240 and gave 'capture failed' errors with anything else.
CorelDRAW X5 :: Error / Failed To Initialize Video Capture Plugin
Jan 22, 2013in capture mode, choosing "capture video"I get error message "failed to initialize the video capture plug-in another program may be using it or this file has been moved" " open driver failed" 152.00.43.0 15023.4.2 my video capture device is a USB WDM 2860 and shows in the "source" window but no "formate" can be chosen and no video comes through. The operating system is windows 7 64 bit. I have "Magix movie edit pro 17" and "Cyberlink Video Director" and both of these programs work with the same device and capture. Neather one of these applications are running while using Video Studio. I checked and nothing else is utilizing this USB WDM 2860 device. I reinstalled the software, installed the patches, and uninstalled the USB drivers and reinstalled them.
View 7 Replies View RelatedAutoDesk Smoke :: Failed To Initialize Stone+Wire Connection
Sep 5, 2012I made it through a project with a few Smoke crashes, mostly on a particular clip. Then when I go back to make revisions a day later I get this message:
Error: VOLUMEMGT: Failed to initialize Stone+Wire connection.
Everything was working fine up to that point besides the few Smoke crashes that recovered with no problem.I am really in a bind now and need to finish this project urgently.sw_logs_2.txt
AutoDesk Smoke :: Failed To Initialize Stone / Wire Connection On Startup
Feb 27, 2013I get error error "Failed to Initialize Stone + Wire connection when I start Smoke 2013. It working fine for 3 weeks.I uninstalled, reinstall, and still cannot get it to work.
Do I need to get a new download? Someone said it may be due to my internet connection.
AutoDesk Smoke :: Failed To Initialize Stone And Wire - Press Escape
Jan 14, 2011I read studios2010 problem and it sounds like I have something similar.
I get to the startup screen and get "Failed to Initialize Stone & Wire. Press Escape."
I have a student license and I might have a corrupted .db file. Just don't know where .db files are on my computer.
VideoStudio :: Cannot Initialize Application / Screen Resolution Is Too Small To Play Video
Dec 1, 2010I Just bought a new HP laptop and it came with Corel VideoStudio Pro X3 pre installed. When I go to open the program I get the error message 'Cannot initialize application. The screen resolution is too small to play the video. The screen resolution must be set to at least 1024 x 768". Well the screen res is on 1600 x 900, so i thought i would have that covered. I tried changing the screen res to 1024x768 and get the same message.
View 8 Replies View RelatedPhotoshop :: Application Manager Failed And Would Not Update
Aug 25, 2013In trying to download PS CC, Application Manager failed and would not update, after first claiming that another instance was running. I tried re-booting to no avail. (I am upgrading from CS6, running Windows 7).
View 6 Replies View RelatedPhotoshop :: A Required Application Library Failed...
Dec 5, 2007Seems like I go through this problem time and again with Photoshop + Acrobat CS2 and still have yet to resolve a way of fixing it short of completely wiping my drive and re-installing Windows (XP Pro) The error is "application library failed to load and the product cannot continue"
If there is anyone out there that has figured out a way to fix this issue please fill me in.
This time I went as far as a complete and though removal of all Adobe products from the system and the registry and then completely reinstalled the product.
I have forgone purchasing CS3 because of this issue as I am 99% sure that it has still not been resolved.
Basically Photoshop and Acrobat are useless at this point and I am using an old version of Picture Publisher and Macromedia Fireworks to complete my work. This I assume is good advertising for Adobe :)
See this post in the forum "could not complete your request because of a program error", PDF format, cs2, xp" as this is an ongoing Adobe issue that they have completely blown off!
I am working on
Adobe Photoshop Version: 9.0.2 (9.0.2x296)
Operating System: Windows XP
Version: 5.1 Service Pack 2
System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, HyperThreading
Physical processor count: 1
Processor speed: 2798 MHz
Built-in memory: 2559 MB
Free memory: 1812 MB
Memory available to Photoshop: 1758 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: XXXXXXXXXXXXXXXXXX (I have a legal copy)
Application folder: C:Program FilesAdobeAdobe Photoshop CS2
Temporary file path: C:DOCUME~1JIMSHE~1LOCALS~1Temp
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 128.0G, 65.5G free
Primary Plug-ins folder: C:Program FilesAdobeAdobe Photoshop CS2Plug-Ins
Additional Plug-ins folder: not set
Installed plug-ins:
ADM 3.10x21
ASDStrm 1.03x2
Accented Edges 9.0
Angled Strokes 9.0
Average 9.0 (9.0x196)
BMP 9.0 (9.0x196)
Bas Relief 9.0.....
Photoshop :: Adobe Application Manager Failed To Install
Aug 30, 2013I have followed all the directions for downloading but have not been able to complete the downloading.
Message was "Adobe Application Manager failed to install".
Photoshop :: Error :: The Application Has Failed To Start Because MSVCRT10.dll Was Not Found
Sep 22, 2007I am getting an error about 10 times each time I open Photoshop. It says "The application has failed to start because MSVCRT10.dll was not found. Re-installing the application may fix this problem".
This does nothing besides lag up Photoshop for me. I have most of my ram towards Photoshop and it still lags like crazy. I was wondering if there WAS any way to fix it besides re-installing.
Photoshop :: Error :: Application Has Failed To Start Because NUVTwain.dll Was Not Found
Dec 7, 2003I just received and loaded my new copy of CS. I had been using Elements at home and PS 6.0 in class. My OS is Windows XP.
I tried to use the Image>Resize>Image Size function, I changed the resolution from 150 to 72 but 149.999 appeared in the box. I also tried to change the Pixel dimensions to no avail.
I brought Elements up which had always worked before and experienced the same thing.
The only odd thing I've noticed when I bring up PhotoShop or PhotoShop Elements is a message "Unable to locate component" then in the box it reads "Application has failed to start because NUVTwain.dll was not found. Reinstalling the application may fix this". This has been displayed for some time now while I was using Elements, I just clicked on it four times and the program loaded. Now it appears in either PhotoShop version. I tried reinstalling Elements some time ago and it didn't solve the problem. I reinstalled CS and it also still has the same message.
Photoshop Elements :: Application Has Failed To Install Shared Technologies
Jan 11, 2014Purchased a elements 11 disk from a store.After it finishes installing it says application has failed to install Shared Technologies.The program then starts rolling back the entire install and no programme is install.
View 2 Replies View RelatedPhotoshop :: Failed Installation - How To Rerun Adobe Application Manager Updates For CS6
Oct 2, 2012The installation of Adobe Extension Manager CS6 failed - while 2 others update for Photoshop CS6 did install. I was installing Adobe Reader X. That's why I discovered the notification from the application manager about updates for CS6 - and I just confirmed that as well.
Apparently the Reader installation blocked only the update installation of Adobe Extension Manager CS6 - saying another installation process was running ... such stuff happens sometimes.
However, it seems Adobes Application Manager update module does not track its failed installations? It does not automatically advertise that update has not been installed and notifying me again to install it. At least not immediately.. So how do I rerun the Adobe Application Manager update module to check for updates manually?
CorelDRAW Premium Suite X5 :: Editing Bitmaps - Failed To Launch Server Application
Sep 5, 2011When I'm in Corel Draw, I've imported a picture, converted the picture to bitmap and go to edit bitmap in Corel Paint it says FAILED TO LAUNCH SERVER APPLICATION.
View 1 Replies View RelatedCorelDRAW X4 :: Failed To Launch Server Application / Error When Calling Edit Bitmap - Function
Jun 5, 2008URL.... "Failed to launch server application" when trying to edit a bitmap out of CorelDraw, only later saw that specific post was for X3. I have the same trouble, only with X4.
To recap my problem: When calling the "edit bitmap" function in X4 - I receive this message: "Failed to launch server application". Paint opens, closes, opens, closes and then the message pops up.
I tested several files, different bitmaps, different dpi's, new files with newly converted bitmaps (filled rectangle to bitmap). To no avail.
Photoshop :: 'Could Not Initialize Photoshop Failed...
Jan 24, 2008But when I start Photoshop, it displays its first couple screens full of stuff (before there's any user input), and then displays a dialogue box saying, 'Could not initialize Photoshop failed to initialize CoolType'. When you click OK, Photoshop terminates.
It may or may not be relevant, but Illustrator also won't start, though it doesn't even give me the courtesy of an error message. It just displays that little box with the graphics and the list of developers, for 30 seconds or so, and then it disappears without a trace.
CorelDRAW Graphics Suite X4 :: Failed To Launch Server Application Error When Calling Edit Bitmap Function
Jun 9, 2011complete Corel X4 uninstall 3 times already .... even went so far as to reboot the registry to a date before I installed Corel X4 Suite to no avail.
The program has had no issues until the last 2 weeks. The actual issue I am having is Paint works fine as a separate entity however when I try to edit a bitmap from within X4 an error pops up telling me "Failed to launch server application" This is a major PITB as I own a graphics company and this is causing no end of problems
AutoCAD 2013 :: The Application Has Failed To Start Because Its Side-by-side Configuration Is Incorrect
Jan 3, 2014I downloaded AutoCAD on my windows 7 home premium,but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 1 Replies View RelatedAutoCAD 2013 :: Application Has Failed To Start Because Its Side-by-side Configuration Is Incorrect
Jan 3, 2014I downloaded AutoCAD architecture 2014 on my windows 7 home premium, but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect.see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 2 Replies View RelatedAutoCAD 2013 :: Application Has Failed To Start Because Its Side-by-side Configuration Is Incorrect
Nov 12, 2013I have just updated to Windows 8.1,(32 bit) and when I try running Autocad 2013 I get this message:
C:Program FilesAutodeskAutoCAD 2013acad.exe
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
what the "application event log" is or the "command-line sxstrace.exe".