Photoshop :: A Required Application Library Failed...
Dec 5, 2007
Seems like I go through this problem time and again with Photoshop + Acrobat CS2 and still have yet to resolve a way of fixing it short of completely wiping my drive and re-installing Windows (XP Pro) The error is "application library failed to load and the product cannot continue"
If there is anyone out there that has figured out a way to fix this issue please fill me in.
This time I went as far as a complete and though removal of all Adobe products from the system and the registry and then completely reinstalled the product.
I have forgone purchasing CS3 because of this issue as I am 99% sure that it has still not been resolved.
Basically Photoshop and Acrobat are useless at this point and I am using an old version of Picture Publisher and Macromedia Fireworks to complete my work. This I assume is good advertising for Adobe :)
See this post in the forum "could not complete your request because of a program error", PDF format, cs2, xp" as this is an ongoing Adobe issue that they have completely blown off!
I am working on
Adobe Photoshop Version: 9.0.2 (9.0.2x296)
Operating System: Windows XP
Version: 5.1 Service Pack 2
System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, HyperThreading
Physical processor count: 1
Processor speed: 2798 MHz
Built-in memory: 2559 MB
Free memory: 1812 MB
Memory available to Photoshop: 1758 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: XXXXXXXXXXXXXXXXXX (I have a legal copy)
Application folder: C:Program FilesAdobeAdobe Photoshop CS2
Temporary file path: C:DOCUME~1JIMSHE~1LOCALS~1Temp
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 128.0G, 65.5G free
Primary Plug-ins folder: C:Program FilesAdobeAdobe Photoshop CS2Plug-Ins
Additional Plug-ins folder: not set
Installed plug-ins:
ADM 3.10x21
ASDStrm 1.03x2
Accented Edges 9.0
Angled Strokes 9.0
Average 9.0 (9.0x196)
BMP 9.0 (9.0x196)
Bas Relief 9.0.....
Photoshop CC today opens Adobe Application Manager, says "Sign in Required", but with correct info gives error message. Also, CC desktop not working. I haven't had any problem in the previous two months. I also was just build two weeks ago, and had to update my billing information. I tried online chat, after 30 minutes of typing, I've been disconnected twice. The funny thing is, Photoshop CC does open, and it works fine. I'm on a Mac running the latest operating system and hardware.
In trying to download PS CC, Application Manager failed and would not update, after first claiming that another instance was running. I tried re-booting to no avail. (I am upgrading from CS6, running Windows 7).
I am getting an error about 10 times each time I open Photoshop. It says "The application has failed to start because MSVCRT10.dll was not found. Re-installing the application may fix this problem".
This does nothing besides lag up Photoshop for me. I have most of my ram towards Photoshop and it still lags like crazy. I was wondering if there WAS any way to fix it besides re-installing.
I just received and loaded my new copy of CS. I had been using Elements at home and PS 6.0 in class. My OS is Windows XP.
I tried to use the Image>Resize>Image Size function, I changed the resolution from 150 to 72 but 149.999 appeared in the box. I also tried to change the Pixel dimensions to no avail.
I brought Elements up which had always worked before and experienced the same thing.
The only odd thing I've noticed when I bring up PhotoShop or PhotoShop Elements is a message "Unable to locate component" then in the box it reads "Application has failed to start because NUVTwain.dll was not found. Reinstalling the application may fix this". This has been displayed for some time now while I was using Elements, I just clicked on it four times and the program loaded. Now it appears in either PhotoShop version. I tried reinstalling Elements some time ago and it didn't solve the problem. I reinstalled CS and it also still has the same message.
Purchased a elements 11 disk from a store.After it finishes installing it says application has failed to install Shared Technologies.The program then starts rolling back the entire install and no programme is install.
Recently I have been trying to build table driven products and ipart tables, but when I copy a member to create a new part number, upon exiting the iassembly author I get the following message "excel installation is required for this operation. failed to launch excel". I have a fully functional version of 2010 Excel installed which has been used so it should be recognized in the windows registry. I am running Windows 8 and Autodesk Inventor 2014.
The installation of Adobe Extension Manager CS6 failed - while 2 others update for Photoshop CS6 did install. I was installing Adobe Reader X. That's why I discovered the notification from the application manager about updates for CS6 - and I just confirmed that as well.
Apparently the Reader installation blocked only the update installation of Adobe Extension Manager CS6 - saying another installation process was running ... such stuff happens sometimes.
However, it seems Adobes Application Manager update module does not track its failed installations? It does not automatically advertise that update has not been installed and notifying me again to install it. At least not immediately.. So how do I rerun the Adobe Application Manager update module to check for updates manually?
I just recently started having problems with my PSP Photo XI program on my laptop. The other day it would start up and run normally, but the next day when I went to run the program, it wouldn't start. My computer would freeze up and show this error message: "The application failed to initialize properly (0xc0000006). Click OK to terminate the applicaion."
I tried turning off my computer and running the program again, but the same thing came up. I tried to run the repair program on it, nothing. I even tried to uninstall PSP XI to no avail as I got a different error message: "Internal Error 2328 C:Program FilesCorelCorel Paint Shop Pro XICoreErrorCodesRC.dll"
I really don't know what to do, short of just completely resetting my laptop back to factory settings and starting fresh. But even then I don't know if that would fix the problem.
I wish I knew why the program decided to just stop working one day, as I haven't downloaded anything and my anti-virus is up to date.My computer is a Dell XPS M1710, and it runs Windows XP SP3.
When I'm in Corel Draw, I've imported a picture, converted the picture to bitmap and go to edit bitmap in Corel Paint it says FAILED TO LAUNCH SERVER APPLICATION.
URL.... "Failed to launch server application" when trying to edit a bitmap out of CorelDraw, only later saw that specific post was for X3. I have the same trouble, only with X4.
To recap my problem: When calling the "edit bitmap" function in X4 - I receive this message: "Failed to launch server application". Paint opens, closes, opens, closes and then the message pops up.
I tested several files, different bitmaps, different dpi's, new files with newly converted bitmaps (filled rectangle to bitmap). To no avail.
complete Corel X4 uninstall 3 times already .... even went so far as to reboot the registry to a date before I installed Corel X4 Suite to no avail.
The program has had no issues until the last 2 weeks. The actual issue I am having is Paint works fine as a separate entity however when I try to edit a bitmap from within X4 an error pops up telling me "Failed to launch server application" This is a major PITB as I own a graphics company and this is causing no end of problems
After installing and opening PS6 I get 'Runtime Error! R6034 An application has made an attempt to load the C runtime library (Win7 64bit)'Clicking on this it will come back seven times, after which PS6 starts. I've tried the following:
Checked all my updates Checked for viruses and malware Run CCClean and SysMechanic Uninstall PS6 Reboot Run Adobe Creative Suite Cleaner Restart Install CS6 Install updates
No change! I've also reinstalled the MS runtime library, tried to start in safe mode, all to no avail.
I have a problem with media libraries in Corel Video Studio Pro X4.
When I close and reopen Studio X4 the library does not contain any media (photo, video, audio). Library exports and imports no luck. It looks as if start Studio the library is reset. A smart package no luck too.
Deleting C:Documents and settings....Ulead SystemsCorel Videostudio Pro14.0pl-PL no luck.
The problem is so serious that adding a HD video again- new proxy file is created- it takes a long time. The old proxy file is correct, but in proxy manager is absent.
AMD Athlon 7860 (DualCore) 2,8GHz, 4GB RAM, NVidia GeForce GTS450 1GB CUDA, Windows XP SP3. VideoStudio with servicepack, DirectX 9.0c. Administrator acount. 40GB free on C: HDD.
I downloaded AutoCAD on my windows 7 home premium,but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
I downloaded AutoCAD architecture 2014 on my windows 7 home premium, but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect.see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
I have just updated to Windows 8.1,(32 bit) and when I try running Autocad 2013 I get this message:
C:Program FilesAutodeskAutoCAD 2013acad.exe
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
what the "application event log" is or the "command-line sxstrace.exe".
I am trying to invoke AutoCAD 2012 and am gettting the following error: CUsersatillgrenDesktopAutoCAD.exe "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
I receive an "Import failed" message when trying to import my iPhoto library to my trial version of PE11. I am running Mac OS X 10.7.5 and using iPhoto 11. I have tried 4 or 5 times now with the same result.
I bought Adobe Photoshop Elements 9 but get the following alert: "Some of the application components are missing from the Application directory, Please reinstall the application." Can it be reinstalled? It is not available under "History" and none of the available installs appear to be for Mac OS X (Version 10.7.4). S
I have PSE9 and a macbook pro 10.9. I lost the original DVD that came with my purchase of PSE. Some files must have gotten corrupted because I can't open the program without reintalling. It says, "Some of the application components are missing from the application directory. Please reinstall the application." I have the serial number and all and I registered the product. Is there somewhere I can download a new copy to install?
at photoshop cs6 extended downloaded in july, i now get the following message: "some of the application components are missing from the application directory. please reinstall the application."
I use Photoshop frequently to work on photographs that I print for others. Recently I changed the ink I use from the genuine type to the compatible type of ink cartridges. I now purchase ink cartridges from a company called Dealo at [URL].
The problem is that there is a slight difference between the color balance of printed photos between the genuine and the ones from Dealo. Unless you place the two side by side for comparison you probably wouldn't notice but here is my dilemma. Most of the clients I produce photos for are repeat clients, which means they can do side by side comparisons.
