I just recently started having problems with my PSP Photo XI program on my laptop. The other day it would start up and run normally, but the next day when I went to run the program, it wouldn't start. My computer would freeze up and show this error message: "The application failed to initialize properly (0xc0000006). Click OK to terminate the applicaion."
I tried turning off my computer and running the program again, but the same thing came up. I tried to run the repair program on it, nothing. I even tried to uninstall PSP XI to no avail as I got a different error message: "Internal Error 2328 C:Program FilesCorelCorel Paint Shop Pro XICoreErrorCodesRC.dll"
I really don't know what to do, short of just completely resetting my laptop back to factory settings and starting fresh. But even then I don't know if that would fix the problem.
I wish I knew why the program decided to just stop working one day, as I haven't downloaded anything and my anti-virus is up to date.My computer is a Dell XPS M1710, and it runs Windows XP SP3.
I have the student version of Inventor 2014 installed on my computer. My O/S is Windows 7 Ultimate 64 bit. I have installed and reinstalled Microsoft Visual Basics three times. But, I am still getting the error "VBA failed to initialize properly".The program was working fine for about a week with no errors reported. Now, every time I try to start a tutorial I get this error.
After not having much luck with the last video card, I changed my video card to a device with the Philips 713x chipset
Now when I select video capture I get the following message: failed to initialize the video capture plugin Open driver failed (15200:43:0) (15023:4:2) cannot create the video capture filter
I have just installed card (SAA7130 TV PCI card) with latest drivers excluding the software so Video Studio 12 pro is the only capture software on the machine . I also re-installed both card and Video Studio after doing a complete system restore and used CC cleaner to remove any residual data before re-installing.
I need to use video capture within the Video Studio software as I need to use the scene detection functionality.The reason I had to change the card in the first place is that video studio only allowed me to capture in AVI 320x240 and gave 'capture failed' errors with anything else.
in capture mode, choosing "capture video"I get error message "failed to initialize the video capture plug-in another program may be using it or this file has been moved" " open driver failed" 152.00.43.0 15023.4.2 my video capture device is a USB WDM 2860 and shows in the "source" window but no "formate" can be chosen and no video comes through. The operating system is windows 7 64 bit. I have "Magix movie edit pro 17" and "Cyberlink Video Director" and both of these programs work with the same device and capture. Neather one of these applications are running while using Video Studio. I checked and nothing else is utilizing this USB WDM 2860 device. I reinstalled the software, installed the patches, and uninstalled the USB drivers and reinstalled them.
I just received and loaded my new copy of CS. I had been using Elements at home and PS 6.0 in class. My OS is Windows XP.
I tried to use the Image>Resize>Image Size function, I changed the resolution from 150 to 72 but 149.999 appeared in the box. I also tried to change the Pixel dimensions to no avail.
I brought Elements up which had always worked before and experienced the same thing.
The only odd thing I've noticed when I bring up PhotoShop or PhotoShop Elements is a message "Unable to locate component" then in the box it reads "Application has failed to start because NUVTwain.dll was not found. Reinstalling the application may fix this". This has been displayed for some time now while I was using Elements, I just clicked on it four times and the program loaded. Now it appears in either PhotoShop version. I tried reinstalling Elements some time ago and it didn't solve the problem. I reinstalled CS and it also still has the same message.
complete Corel X4 uninstall 3 times already .... even went so far as to reboot the registry to a date before I installed Corel X4 Suite to no avail.
The program has had no issues until the last 2 weeks. The actual issue I am having is Paint works fine as a separate entity however when I try to edit a bitmap from within X4 an error pops up telling me "Failed to launch server application" This is a major PITB as I own a graphics company and this is causing no end of problems
I am trying to invoke AutoCAD 2012 and am gettting the following error: CUsersatillgrenDesktopAutoCAD.exe "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
I had to get a new hard drive on my Mac and I backed everything up and reinstalled it all when I got it back. Photoshop is the only thing not working now. I try to open it and get this message:
Could not initizlize Photoshop failed to initialize cooltype. I've read and read and tried everything is could on this[URL]... and I also uninstalled and reinstalled it twice and still I get this message.
I'm trying to run the trial version of VS Pro X4 after picking up a disc at Focus on Imaging at the NEC in Birmingham. I've trioed installing it on two different PCs and get the following message on both: Cannot Initialize Application Invalid Parameter [16345:1:1] [15034:1:32]
I was very impressed with the demo at the NEC and am keen to buy, but not if it's going to misbehave.
I Just bought a new HP laptop and it came with Corel VideoStudio Pro X3 pre installed. When I go to open the program I get the error message 'Cannot initialize application. The screen resolution is too small to play the video. The screen resolution must be set to at least 1024 x 768". Well the screen res is on 1600 x 900, so i thought i would have that covered. I tried changing the screen res to 1024x768 and get the same message.
In trying to download PS CC, Application Manager failed and would not update, after first claiming that another instance was running. I tried re-booting to no avail. (I am upgrading from CS6, running Windows 7).
Seems like I go through this problem time and again with Photoshop + Acrobat CS2 and still have yet to resolve a way of fixing it short of completely wiping my drive and re-installing Windows (XP Pro) The error is "application library failed to load and the product cannot continue"
If there is anyone out there that has figured out a way to fix this issue please fill me in.
This time I went as far as a complete and though removal of all Adobe products from the system and the registry and then completely reinstalled the product.
I have forgone purchasing CS3 because of this issue as I am 99% sure that it has still not been resolved.
Basically Photoshop and Acrobat are useless at this point and I am using an old version of Picture Publisher and Macromedia Fireworks to complete my work. This I assume is good advertising for Adobe :)
See this post in the forum "could not complete your request because of a program error", PDF format, cs2, xp" as this is an ongoing Adobe issue that they have completely blown off!
I am working on
Adobe Photoshop Version: 9.0.2 (9.0.2x296) Operating System: Windows XP Version: 5.1 Service Pack 2 System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, HyperThreading Physical processor count: 1 Processor speed: 2798 MHz Built-in memory: 2559 MB Free memory: 1812 MB Memory available to Photoshop: 1758 MB Memory used by Photoshop: 55 % Image cache levels: 6 Serial number: XXXXXXXXXXXXXXXXXX (I have a legal copy) Application folder: C:Program FilesAdobeAdobe Photoshop CS2 Temporary file path: C:DOCUME~1JIMSHE~1LOCALS~1Temp Photoshop scratch has async I/O enabled Scratch volume(s): Startup, 128.0G, 65.5G free Primary Plug-ins folder: C:Program FilesAdobeAdobe Photoshop CS2Plug-Ins Additional Plug-ins folder: not set Installed plug-ins: ADM 3.10x21 ASDStrm 1.03x2 Accented Edges 9.0 Angled Strokes 9.0 Average 9.0 (9.0x196) BMP 9.0 (9.0x196) Bas Relief 9.0.....
Purchased a elements 11 disk from a store.After it finishes installing it says application has failed to install Shared Technologies.The program then starts rolling back the entire install and no programme is install.
The installation of Adobe Extension Manager CS6 failed - while 2 others update for Photoshop CS6 did install. I was installing Adobe Reader X. That's why I discovered the notification from the application manager about updates for CS6 - and I just confirmed that as well.
Apparently the Reader installation blocked only the update installation of Adobe Extension Manager CS6 - saying another installation process was running ... such stuff happens sometimes.
However, it seems Adobes Application Manager update module does not track its failed installations? It does not automatically advertise that update has not been installed and notifying me again to install it. At least not immediately.. So how do I rerun the Adobe Application Manager update module to check for updates manually?
I have CS5 and lately I have been getting this error message: "could not initialize photoshop because there is not enough ram." I have a new computer that is running Windows 8 and has 32 Gigabytes of ram. Whatever the problem actually is, it's not because I don't have enough ram! I can fix it for a while by reboting my computer.