I read studios2010 problem and it sounds like I have something similar.
I get to the startup screen and get "Failed to Initialize Stone & Wire. Press Escape."
I have a student license and I might have a corrupted .db file. Just don't know where .db files are on my computer.
I made it through a project with a few Smoke crashes, mostly on a particular clip. Then when I go back to make revisions a day later I get this message:
Error: VOLUMEMGT: Failed to initialize Stone+Wire connection.
Everything was working fine up to that point besides the few Smoke crashes that recovered with no problem.I am really in a bind now and need to finish this project urgently.sw_logs_2.txt
I get error error "Failed to Initialize Stone + Wire connection when I start Smoke 2013. It working fine for 3 weeks.I uninstalled, reinstall, and still cannot get it to work.
Do I need to get a new download? Someone said it may be due to my internet connection.
I was waiting for a long time to get back to smoke since I left that FFI platform few years ago. Installed a demo to check the stability of the program on OSX. Have a problem with Stone+Wire. Smoke wont start - i get an error that he cant connect to stone. Checked Service Monitor - Stone+Wire is blinking red and green, the same as wiretap server. When I press restart, it goes green for a few seconds then goes back to red again.
My rig : 2 x 2.66 6-Core Xenon 17GB Ram os 10.6.8 and I'm setting up media storage to external G-Speed raid-5 that is connected by ESATA.
here are long files
sw_served
# Discreet sw_serverd log file - 1.0
# Started - (CET) Tue Mar 26 13:13:37 2013
# Hostname - Gonzo.local
376479744 CoThreadPthread.C:200 03/26/13:13:13:37.447 Registered thread 'Logger'
398798848 CoThreadPthread.C:200 03/26/13:13:13:37.490 Registered thread 'S+W Gateway connection timer monitor'
[Code] .....
I have successfully finished 2 projects in Pre2, but today, Smoke started to crash when I forced it to save.
Stone&Wire is red, and won’t restart.
After typing
cat /usr/discreet/sw/log/sw_dbd.log
into terminal I got this:
unknownd830624e3a74:~ Tomi$ cat /usr/discreet/sw/log/sw_dbd.log
# Discreet sw_dbd log file - 1.0
# Started - (CET) Mon Aug 6 01:18:10 2012
# Hostname - unknownd830624e3a74
5246976 CoThreadPthread.C:200 08/06/12:01:18:10.310 Registered thread ‘Logger’
[Code] .....
I have rebooted several times, but no luck. I’m not a programmer, but as far as I understand, the problem is on a framestore. Funny thing is, the last saved version is still available in Smoke, everything is in place, and it plays normally, just when it comes to saving or exporting, it crashes, or refuses to export.
I can't get clips to render to the stone in the background. I am running 2012 SP2. I looked and the Backburner version is 2013.
How do I get rid of this? I have run the uninstaller, but that is less than a complete un-install it seems.
I have program with do...loop while
I draw line(they are also block) but, when I press right click it doesnt exit sub?
how can I exit sub when I press escape or right click?
2 question:
When I press escape my programme add a new line. but I dont want it to add my draw. how Can I solved this issue?
3. question
I want to draw a line with temporary dimention( as you see picture) is it possible?
4 question
is appear any icon when I get on my line block ?( **** yo see on picture )( green plus)
picture02
Imports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.ApplicationServicesImports Autodesk.AutoCAD.DatabaseServicesImports Autodesk.AutoCAD.GeometryImports Autodesk.AutoCAD.EditorInputImports System.Windows.InputImports
[Code]....
just tried to get access to a Flame Framestore via Wire/Network but unfortunatly I only see the Harddrive, not the Framestore.
I would love to load some conformed stuff from the Flame.
Is this not yet implemented or is there some special setting I have to change either on the Flame or SMAC? (SMAC 2013 prerelease on MBpro)
i have problem with auto stabilizer,analysis failed.
View 4 Replies View RelatedAfter lots of failed vic scripts in terminal, I finally got a vic to run (somewhat), here's the results:
Opening volume stonefs7 for integrity check ...
VOLUMEMGT : Using 7 as root partition.
Locking volume ...
Initiating integrity check ...
Extracting frames from /usr/discreet/clip/stonefs7/Viewstream/ExportIO.000.clib.
Extracted 0 frame.
Extracting frames from /usr/discreet/clip/stonefs7/Viewstream/editing.000.desk.
Extracted 0 frame.
Extracting frames from /usr/discreet/clip/stonefs7/Viewstream/Default.000.clib.
[code]....
I have one of the Promise R6 drive arrays that has failed on me but fortunately it hung in there long enough for me to back up all my data. My questions is once my new array shows up can I copy all the data onto the new drive with all the same folder hierarchy and will it all work fine with smoke again as if nothing changed?
View 3 Replies View RelatedI got that message when I was trying to export a Quicktime movie - although it appears it's going to let me continue to export the Quicktime - I'm hoping it'll have audio when all is said & done. Although I understand the words, I have the following questions:
1. What does it really mean?
2. How will affect me/my life/the Quicktime file I'm exporting?
3. Perhaps most importantly, why is it happening & what can I do to prevent it in the future?
The file I'm trying to export is the same one from the 7-hour Process time thread I posted about on here recently. It's the simplest possible thing:
- 1 Layer of around 15 "reels" spliced together
- 1 (adjustment) Layer of a single color correction gap effect that runs the length of the whole timeline (don't think this has anything to do with the problem at hand)
- 1 audio track w/ 2 mono layers, L&R, of a single AIFF soundtrack file
I get this prompt while copying sequences between projects with gateway-linked footage, and I'm not sure what it means.
---------------------------------------------------------------------
CLIP MGT: Unmanaged media contained in selection. Store media on Wire?
---------------------------------------------------------------------
Is it asking me if I want to store a local copy or stonifize the media?
i get this really weird bug when i try to install photoshop cs6
PDapp here [URL]
I tried to remove an old version with Revo uninstaller, and when trying to install that one after, it just did that
Theres the error, in Danish though, but it says:"An error occurred the installationsprogram could not be initialized, Download Adobe support advisor to register the problem"
The problem is, i have downloaded it, but it does not fix it..
I had to get a new hard drive on my Mac and I backed everything up and reinstalled it all when I got it back. Photoshop is the only thing not working now. I try to open it and get this message:
Could not initizlize Photoshop failed to initialize cooltype. I've read and read and tried everything is could on this[URL]... and I also uninstalled and reinstalled it twice and still I get this message.
i download photoshop but then when i was installing the program, the installer failed to initialize. I downloud Adobe support advisor but it did not find any problem.
View 1 Replies View Relatedafter installing Excel 2013 I can not open anything in Inventor."VBA failed to initialize... Please restart inventor".I uninstalled Excel.
I re-installed Inventor.
I reinstalled vba6.msi.
Still running in this error!
System: Win 8 - Inventor 2014 - Excel 2013
I have the student version of Inventor 2014 installed on my computer. My O/S is Windows 7 Ultimate 64 bit. I have installed and reinstalled Microsoft Visual Basics three times. But, I am still getting the error "VBA failed to initialize properly".The program was working fine for about a week with no errors reported. Now, every time I try to start a tutorial I get this error.
View 5 Replies View RelatedCould not initialize Photoshop failed to initialize CoolType..... photoshop cs6, upon launch.. crashes with this error..
View 3 Replies View Relatedit openes a dialog box that read: this application has failed to initialize properly ( 0xc000001d). click ok to terminate program
View 5 Replies View Relatedwhen i run 3dsmax 2012 it tell me "the application failed to initialize properly (0xc0000005)"
View 2 Replies View RelatedI cannot open Illustrator CS6. I get this error. How do I proceed?
View 3 Replies View RelatedAfter not having much luck with the last video card, I changed my video card to a device with the Philips 713x chipset
Now when I select video capture I get the following message:
failed to initialize the video capture plugin
Open driver failed
(15200:43:0)
(15023:4:2)
cannot create the video capture filter
I have just installed card (SAA7130 TV PCI card) with latest drivers excluding the software so Video Studio 12 pro is the only capture software on the machine . I also re-installed both card and Video Studio after doing a complete system restore and used CC cleaner to remove any residual data before re-installing.
I need to use video capture within the Video Studio software as I need to use the scene detection functionality.The reason I had to change the card in the first place is that video studio only allowed me to capture in AVI 320x240 and gave 'capture failed' errors with anything else.
in capture mode, choosing "capture video"I get error message "failed to initialize the video capture plug-in another program may be using it or this file has been moved" " open driver failed" 152.00.43.0 15023.4.2 my video capture device is a USB WDM 2860 and shows in the "source" window but no "formate" can be chosen and no video comes through. The operating system is windows 7 64 bit. I have "Magix movie edit pro 17" and "Cyberlink Video Director" and both of these programs work with the same device and capture. Neather one of these applications are running while using Video Studio. I checked and nothing else is utilizing this USB WDM 2860 device. I reinstalled the software, installed the patches, and uninstalled the USB drivers and reinstalled them.
View 7 Replies View RelatedI just recently started having problems with my PSP Photo XI program on my laptop. The other day it would start up and run normally, but the next day when I went to run the program, it wouldn't start. My computer would freeze up and show this error message: "The application failed to initialize properly (0xc0000006). Click OK to terminate the applicaion."
I tried turning off my computer and running the program again, but the same thing came up. I tried to run the repair program on it, nothing. I even tried to uninstall PSP XI to no avail as I got a different error message: "Internal Error 2328 C:Program FilesCorelCorel Paint Shop Pro XICoreErrorCodesRC.dll"
I really don't know what to do, short of just completely resetting my laptop back to factory settings and starting fresh. But even then I don't know if that would fix the problem.
I wish I knew why the program decided to just stop working one day, as I haven't downloaded anything and my anti-virus is up to date.My computer is a Dell XPS M1710, and it runs Windows XP SP3.
But when I start Photoshop, it displays its first couple screens full of stuff (before there's any user input), and then displays a dialogue box saying, 'Could not initialize Photoshop failed to initialize CoolType'. When you click OK, Photoshop terminates.
It may or may not be relevant, but Illustrator also won't start, though it doesn't even give me the courtesy of an error message. It just displays that little box with the graphics and the list of developers, for 30 seconds or so, and then it disappears without a trace.
how to draw the intersection wire like a half circle passing over the other wire.
View 9 Replies View RelatedI know that the AJA Kona 3 card has 2 outputs. Can Smoke send one eye to one channel and the other eye to the other of the Kona 3 card? Dual Stream output is what I am really getting at.
View 4 Replies View Relatedhow to mesh wire together in a pattern on a pole of say 60mm diameter and 1 metre length?
View 9 Replies View RelatedIs there any way that Smoke can see/output sub-blacks and super whites? Can't find any way of seeing them on my scope, Smoke just clamps everything. It won't even see anything below zero in order for me to make a correction on it, everything seems to be clamped on import. I'm using ProRes HQ footage.
View 9 Replies View RelatedWhat is the best plugin to do spline warps in smoke?(need something like the distort in flame) I notice revisionfx don't make a warper for smoke on mac.
View 7 Replies View Related