I'm trying to run the trial version of VS Pro X4 after picking up a disc at Focus on Imaging at the NEC in Birmingham. I've trioed installing it on two different PCs and get the following message on both: Cannot Initialize Application Invalid Parameter [16345:1:1] [15034:1:32]
I was very impressed with the demo at the NEC and am keen to buy, but not if it's going to misbehave.
I Just bought a new HP laptop and it came with Corel VideoStudio Pro X3 pre installed. When I go to open the program I get the error message 'Cannot initialize application. The screen resolution is too small to play the video. The screen resolution must be set to at least 1024 x 768". Well the screen res is on 1600 x 900, so i thought i would have that covered. I tried changing the screen res to 1024x768 and get the same message.
View 8 Replies View Relatedit openes a dialog box that read: this application has failed to initialize properly ( 0xc000001d). click ok to terminate program
View 5 Replies View Relatedwhen i run 3dsmax 2012 it tell me "the application failed to initialize properly (0xc0000005)"
View 2 Replies View RelatedI cannot open Illustrator CS6. I get this error. How do I proceed?
View 3 Replies View RelatedI just recently started having problems with my PSP Photo XI program on my laptop. The other day it would start up and run normally, but the next day when I went to run the program, it wouldn't start. My computer would freeze up and show this error message: "The application failed to initialize properly (0xc0000006). Click OK to terminate the applicaion."
I tried turning off my computer and running the program again, but the same thing came up. I tried to run the repair program on it, nothing. I even tried to uninstall PSP XI to no avail as I got a different error message: "Internal Error 2328 C:Program FilesCorelCorel Paint Shop Pro XICoreErrorCodesRC.dll"
I really don't know what to do, short of just completely resetting my laptop back to factory settings and starting fresh. But even then I don't know if that would fix the problem.
I wish I knew why the program decided to just stop working one day, as I haven't downloaded anything and my anti-virus is up to date.My computer is a Dell XPS M1710, and it runs Windows XP SP3.
After not having much luck with the last video card, I changed my video card to a device with the Philips 713x chipset
Now when I select video capture I get the following message:
failed to initialize the video capture plugin
Open driver failed
(15200:43:0)
(15023:4:2)
cannot create the video capture filter
I have just installed card (SAA7130 TV PCI card) with latest drivers excluding the software so Video Studio 12 pro is the only capture software on the machine . I also re-installed both card and Video Studio after doing a complete system restore and used CC cleaner to remove any residual data before re-installing.
I need to use video capture within the Video Studio software as I need to use the scene detection functionality.The reason I had to change the card in the first place is that video studio only allowed me to capture in AVI 320x240 and gave 'capture failed' errors with anything else.
I've been using this product for a few weeks and this morning it stopped working. Searched the forums, applied all of the fixes. Manually uninstalled, re-downloaded, reinstalled and still crashing on application loading. 6 hours of pure frustration. Never had an issue with X4. before I completely uninstall and purchase a new video editor?
View 3 Replies View RelatedWhen I go to burn a disc I get "The burner is busy for another application". If I restart the computer it works fine, but it is annoying having to do that. Videostudio 11 didn't do that.
View 7 Replies View RelatedI have already installed Service Pack 2 for VS x4 pro. I somehow missed Service Pack 1. Can I still install SP1 now, without uninstalling the whole application? I don't know whether it may be necessary to install them chronologically.
View 3 Replies View RelatedI have a problem with media libraries in Corel Video Studio Pro X4.
When I close and reopen Studio X4 the library does not contain any media (photo, video, audio). Library exports and imports no luck. It looks as if start Studio the library is reset. A smart package no luck too.
Deleting C:Documents and settings....Ulead SystemsCorel Videostudio Pro14.0pl-PL no luck.
The problem is so serious that adding a HD video again- new proxy file is created- it takes a long time. The old proxy file is correct, but in proxy manager is absent.
AMD Athlon 7860 (DualCore) 2,8GHz, 4GB RAM, NVidia GeForce GTS450 1GB CUDA, Windows XP SP3. VideoStudio with servicepack, DirectX 9.0c. Administrator acount. 40GB free on C: HDD.
I tried to download this SP but got a message "The installed version of the application could not be determined. The set up will now terminate"
View 2 Replies View RelatedProjects do not finish burning to DVD. After I have finished editing my video I try to create disc using DVD format. Project completes video rendering but doesn¡¦t complete writing to disc. It stops half way. Then a message pops up saying ¡§The burner is busy for another application.¡¨ I press ok and another message comes up: ¡§The drive is busy or is being used by other applications. Please make sure the drive is ready, close all applications that may be using the drive (including folder windows), and try again. [534:-2147216300:0]¡¨
Drive: External drive Samsung SE-S204S USB CDDVDW
Video Studio 11 Plus
I have made sure no applications are open and the drive works fine with other software. I have included Print Screen shots of when I encounter the problem.
I just upgraded from VS Pro5 to VS Pro 6. Will not launch.
Get error msg "Screen resolution size is not sufficient to launch the application"
Screen resolution is currently set at 1366 x 768 which is "recommended" I have reset resolution and restarted with each attempt at changing resolution... still get message..
Not a happy camper... Seems they should be sophisticated enough to check that system is set properly.... and if not, to give information on how to correct.
I have Corel VideoStudio X6 and am experiencing a relink problem. I moved all my media (pics and vid) from c:HomeMediaFiles to d:MediaFiles. I open VS and relink to the new location.
I noticed it didn't relink properly, I have videos with the same name in different directories. In the end it linked to the incorrect video.So, here's my question:
Is there a master file the VideoStudio application uses to reference video locations? I would assume it’s the library and I was hoping I could possibly open the file (with notepad or something) 'find and replace' c:HomeMediaFiles to d:MediaFiles and avoid the relinking through the interface.
I reloaded my library so I still have everything with the old references after I tried to relink through the UI. Good thing I backup regularly.
Downloaded X4 upgrade. When trying to install it fails with the message "The installed version of the application could not be determined".
View 10 Replies View RelatedHow do I re-install a corrupted Photoshop CC app when the Desk Top CC shows the app as "up to date"?
View 2 Replies View RelatedI bought Adobe Photoshop Elements 9 but get the following alert: "Some of the application components are missing from the Application directory, Please reinstall the application." Can it be reinstalled? It is not available under "History" and none of the available installs appear to be for Mac OS X (Version 10.7.4). S
View 2 Replies View RelatedI have PSE9 and a macbook pro 10.9. I lost the original DVD that came with my purchase of PSE. Some files must have gotten corrupted because I can't open the program without reintalling. It says, "Some of the application components are missing from the application directory. Please reinstall the application." I have the serial number and all and I registered the product. Is there somewhere I can download a new copy to install?
View 7 Replies View Relatedat photoshop cs6 extended downloaded in july, i now get the following message: "some of the application components are missing from the application directory. please reinstall the application."
View 2 Replies View RelatedI've recently started receiving the error message "Could not initialize Photoshop [CS] because there is not enough memory (RAM)" on a Mac with 4GB RAM. I've tried holding command + option + shift at startup to reset the preferences, but it does not seem to have fixed anything. What else can I try?
View 40 Replies View RelatedIve never had a problem with PS but now get a messaage how PSC2 wont initialize because file cant be found.
View 1 Replies View RelatedI am using Photoshop 7 on Windows Vista. I just bought a new computer and installed Photoshop (which worked fine on my old computer running XP). It installs correctly but wen I launch it I get the error "Could not initialize Photoshop because the scratch disks are full." Then Photoshop immedietly shuts down.
My C drive has 1.3 TB free, my D drive has 145 GB free and my E drive has 5 GB free. I've tried defragmenting all the drives and deleting any temp files.
This message suddenly appeared when I tried to open Photoshop CS3 (Vista 64 bit) today together with advice to unlock the file using the 'properties' tab in windows explorer. Prior to today Photodshop was working fine and the only thing I've done since I last used it is to update Cammera Raw to 4.4 - reverting to to 4.3 makes no difference.
I can't see anything in Windows Explorer that does this. But ticking 'run this program as an administrator' in the 'compatibility' tab part resolves it - it allows the program to open but only after presenting me with a 'do you want this program to run?' dialog box each time it opens.
I get this error whenever I try and run Photoshop CS3.
View 16 Replies View RelatedI have CS5 and lately I have been getting this error message: "could not initialize photoshop because there is not enough ram." I have a new computer that is running Windows 8 and has 32 Gigabytes of ram. Whatever the problem actually is, it's not because I don't have enough ram! I can fix it for a while by reboting my computer.
View 2 Replies View RelatedI am running Civil 3D 2013 on Windows 7- 64 bit OS. When I open Civil 3D I get an error saying "INTERNAL ERROR: Cannot Initialize ASI". Civil 3D has been functioning properly for months and all of a sudden this error came up.
View 3 Replies View Relatedi get this really weird bug when i try to install photoshop cs6
PDapp here [URL]
I tried to remove an old version with Revo uninstaller, and when trying to install that one after, it just did that
Theres the error, in Danish though, but it says:"An error occurred the installationsprogram could not be initialized, Download Adobe support advisor to register the problem"
The problem is, i have downloaded it, but it does not fix it..
I had to get a new hard drive on my Mac and I backed everything up and reinstalled it all when I got it back. Photoshop is the only thing not working now. I try to open it and get this message:
Could not initizlize Photoshop failed to initialize cooltype. I've read and read and tried everything is could on this[URL]... and I also uninstalled and reinstalled it twice and still I get this message.
i download photoshop but then when i was installing the program, the installer failed to initialize. I downloud Adobe support advisor but it did not find any problem.
View 1 Replies View RelatedI had no problems with CS5 until today. I downloaded a trial version of In Design. Now, the text engine in CS5 won't initialize. What can I do?
View 1 Replies View Related