Photoshop :: Large Still Panorama In CS6 Video Clipped On Ends
Aug 7, 2013
Windows 7 and PS CS6. I am trying to use the motion effect "PAN" in PS CS6 but the image is large. 7364 x 1080. It pans but clips the ends. The image in the timeline has a slider at the bottom, I take that to mean the image is to wide for the video frame. How can I use the pan effect in PS cs6 to pan a large panorama ?? I tried splitting the image but the seperate images are not a smooth single image.
Â
initial image was 1.93 gigs as a 16 bit tiff, converted to jpeg 7364 x 1080.Â
View 5 Replies
ADVERTISEMENT
Nov 14, 2011
I am new to Corel VideoPro X4 and I am bringing in a fairly big video (3.6gb) with an overall time of 1 minute and 34 seconds. When I import this into X4 it clips the end off at approx 1 minute 30 seconds.
The file is an .avi if this matters.
View 1 Replies
View Related
Mar 18, 2012
I have clipped the start and end locations on some videos. I then export them with the Vidoe setting of "Original". This is suppost to only maintain the original aspect ratio and FPS.
Â
When I view the exported video it is the same as the original, with the clipped start and end points..If I export to a different format then the edits are included.
View 1 Replies
View Related
Dec 8, 2012
Is there a way to keep a video display its last frame after it ends play?
In this scenario lets say I have to overlays each with a video on them.Video A takes half the display and Video B takes the other half - so that they are side to side.
They are staggered in playback where the first ( Video A ) plays first and ends first and the second ( Video B) begins mid-way through when Video A plays.
I would like Video A to not go away after play but rather remain "still" on the last frame while Video B continues playing.
View 2 Replies
View Related
Mar 1, 2014
I need an App to allow me to use a laptop and a remote mouse, and to make a formal presentation to a large audience. I need it to show both "photos" and a "video" in my presentation, allowing me to page through the photos one-at-a-time while I talk about them. How can I use Adobe "Photoshop Element" and "Premiere Element" to do this?
View 1 Replies
View Related
Nov 3, 2010
I captured approximately 1 hour DV file contained different scenes from different places. Now, I would like split this file for smaller parts and save them as a separate .avi files.
Is this possible to do this by VSX3 (e.g. cut or multitrim on timeline and save to separate folder each pieces?
If X3 cannot do this, what software you can recommend for relatively easy and quick multi-split, without loose quality?
View 5 Replies
View Related
Apr 4, 2011
I'm a new user to VS and need combining 2 mpg files into 1 large video.
I have 2 mpg files that I would like to merge together to create 1 large continuous video. The 2 mpg files are in a folder on my D drive.
View 3 Replies
View Related
Jan 16, 2013
I recently downloaded the trial version of VSP X5. And now, I have a new 12 MP camera as opposed to the 5 MP I had before. Anyway this new camera shoots in video mode at 1920, 1280 and 640. When I use 1920 or 1280 (HD), the file size of the videos are huge, so when I import them to VSP, they take a very long time to import. Is this normal when you want high res videos or is there something I can do to cut down on the file size. To test it out, I shot 20 second videos at all three resolutions. In 1920, the file size was almost a whole gig at only 20 seconds. It would be much larger than that for lets say a 20 minute movie. I'm guessing that would take all day to import.
Correction: Actually, It's taking long to "Create a Video File", not to import the video. Anyway, is it normal for the program to take so long to create a file? if it's a 15 or 20 minute video, it will probaly take at least a couple of hours to create at that resolution.
View 12 Replies
View Related
Oct 27, 2012
For some reason when I clip an adjustment to a layer, it doesn't work. Before I clip it though, it works fine, it's only when I clip it to a specific layer, it just instantly removes the adjustment and fails to work. (By this I mean it looks like everything is working fine, with the exception that nothing has changed.) For example, I add a brightness adjustment to a photo, but as soon as I clip it to a layer it just reverts back to before and the layer is clipped. Any adjustments I make while it is clipped doesn't work.
View 2 Replies
View Related
Nov 6, 2013
What I want to be able to check is the areas of clipping in the shadows and highlights. Now I know Lightroom is very easy in the histogram, having a little warning button that will display when an area is off. What I've come up with so far for Photoshop is that there are only two tools, in the camera raw and in levels. Camera Raw is pretty self-explanitory, but I want to be able to check this in photoshop after I've done some work on the image. So I see that the levels tool you can click and hold on the triangle, and if you press the "Alt" key it will show you what areas are clipped. I'm not sure if I really understand it though, as it shows areas that aren't really clipped, e.g. a slightly darker area of sky is showing as light blue, but not a solid color, as being clipped. What is that?
Â
I think that from the example above that say the reason the sky is showing a little cyan is that the red channel is being clipped in the dark sky only, and not the other channels. Do I need to be concerned about this for a good quality print? For best display on the web?
View 6 Replies
View Related
Oct 15, 2008
WINDOWS
CS2 Photoshop
I just started using CS2 - Can I place an eps image (saved with a clip path created in PSD) into a PSD file? I used to be able to do that in PSD 7.
When I place the eps file into PSD, I don't get the clip I get the entire image.
I made sure that I saved the file with the clip path.
View 4 Replies
View Related
Dec 2, 2007
I'm using CS3 on a Mac.
I have an image that I want to clip out. When it is clipped I want the background to be transparent so that when I import it into a Quark document it only shows the clipped image and I can see the background of the Quark document through it.
View 2 Replies
View Related
Mar 10, 2013
I am looking to create a collage made from 100 photos (all taken high res) to be printed large, approx 120cm x 50cm. To be able to print this size I need to keep the high resolution and hence looking for a large file output.
View 1 Replies
View Related
Jan 17, 2013
Something happened when I aborted a batch action in ps. Now, every image I open in CR shows the clipped highlights as bright red even B+W CR2's. I have the current patch for cs5 and have re-installed ps with no improvement.
View 1 Replies
View Related
Aug 11, 2013
.mov seem to have some clipping happening on import or export from after effects.
Â
i'm getting proresHq clip out of premiere to blur a face, and then i export for the grading in resolve in proresHQ. In Premiere CC, i see those overbright (above 100ire), they are not clip. But this doesn't seem to pass on in after effetcs. I try with the original .MXF, no chance. I mess a lot with Color management. And same thing in CS6. So far, i put my projet in 32bits and then drop my output white to retain a maximum of signal for the colorist.
But this is not a viable solution.
I always thought i could import a .mov in after effects, then render in the same codec and obtain the same signal.How can AE, when in 32bits, sees those value but can not write them back on export, in the same codec?
View 9 Replies
View Related
Nov 13, 2007
Im using the pen tool and stroking it with the brush tool and clicking the stimulate pressure setting but I still get hard edges at the end of the strokes.
View 1 Replies
View Related
Sep 16, 2013
I am designing vector art that is much larger than the default 8.5 x 11. I change the page size to accommodate the art I am creating. When I export the art to EPS, all I get is this 2MB file that contains an image that is 8.5 x 11. What can I do about this?
View 6 Replies
View Related
Mar 1, 2013
My prints are getting clipped no matter what I try to do. I am losing approximately 1/8" from all sides of the finished print. From what I can tell, the picture is actually printing larger than the specified size.
Â
This is my process:
Â
In the Develop module I am cropping to the desired aspect ratio using LR presets, then going straight to the print module. My printer is an HP Photosmart C4780. In the Print module I set my margins to 0 and cell size to 4in x 6in. The picture on the screeen looks exactly how I want it to print. I go to Page Setup, select my printer, paper size (borderless 4x6) and orientation, click OK. Then to Print Settings, select the HP paper I am using, click borderless, click save. If I click "scale to fit paper size", I still lose approximately 1/16" on each side. Under Image Settings, I deselect zoom to fill. I have tried selecting it but still experience clipping. I have tried moving the margins in by fractions of an inch and I seem to recover some of the image, but its a long trial and error process that I feel I shouldn't have to do.
Â
A 4x6 test print on regular 8.5x11 paper measures 4-1/8" x 6-1/8". The print layout in LR clearly says 4x6.
View 12 Replies
View Related
Oct 17, 2013
Ok, its really hard to describe this in words, so here is a picture!
So this is just a normal path that I hit the stroke button on. The problem is, it goes from lighter to darker at either end of the path. This may look good now, but I don't want it! I want it to be the same opacity/transparency all the way through the path stroke.
Â
I'm sure I just have some weird box checked.Â
View 4 Replies
View Related
Oct 24, 2007
I've been trying to make lines like these to no luck:
I'm aware this can be achieved with the pen tool. Path stroked with a brush with some settings altered. Most likely Fade.
This is where I am so far:
Problems:
I cant get BOTH ends to fade.
A long path wont get fully stroked since the fade happens too soon.
View 2 Replies
View Related
Aug 15, 2006
way to draw lines (with the line tool) with rounded ends? Something like the arrow head option except with semi-circles?
View 1 Replies
View Related
Feb 9, 2011
I'm splicing together a couple of avi files and outputting as a 720p .wmv. The final file is about 15 minutes long. At each of the straight cuts (I'm not using transitions) in the output file, two or three seconds are cut off! I've tried outputting in different formats and it still occurs, but if I shorten the entire file to a minute or so, it doesn't happen. I've tried it with proxy on and off. I've edited in the very same configuration very often previously and haven't had this problem before.
View 5 Replies
View Related
Aug 29, 2013
I'm working with another artist that uses Illustrator CC. When I open the Cc file in my CS6 there is a clipping mask where the art board border is. Also, everything is a mess with all the strokes now separate from the fills (effectively duplicating everything). Is there a setting that would allow a file to be passed back and forth between CS6 and CC that would keep the layers, styles ,and objects the same? As far as I can tell the other artist only grouped the objects and then saved the file in CC before sending to me.
View 1 Replies
View Related
Aug 27, 2012
Object above is just a typical path.Below is a copy with a 51px Gaussian Blur applied. (using 300DPI Raster Effects Settings).
View 3 Replies
View Related
Jul 18, 2009
I save an image as a tiff in CS2, but when I view the image details in the folder it reads as amicrosoft office document imaging file.. I have been saving as tiffs for years, but only recently has this started happening.
View 4 Replies
View Related
Dec 6, 2013
I dont work with polygonal VPs or clipped VPs often but sometimes I have to. I recently dicovered in working with 2013 AutoCad that when I create a polygonal VP or clip a VP and place it on defpoints or even a no plot layer, the VP outline still prints???? I'm miffed
View 5 Replies
View Related
Mar 25, 2012
I am just trying the Bitmap Tracer tool in XDP7, actually would like only on a part of a picture.
For this clipped that actual part in Clip tool, so in the document only that one can be seen. But in Bitmap Tracer seems that always the whole image analised, how to "real" clip from the picture?
View 3 Replies
View Related
Jul 31, 2011
I have clipped a photo to remove the background and now want to replace one of the images in a website gallery. I know I can delete the original image and replace it but is there a way I can drag my new picture over the old one and replace it like I can when I drag an image from the Bitmap Gallery?
I presume it isn't possible as the original image is a square or rectangle that is filled with the bitmap and the clipped image is an irregular shape.
I am using XDP 6
View 3 Replies
View Related
May 8, 2012
I printed (2) 7x5 Prints using template browser. The top print is getting clipped about a quarter inch.
Â
In the top left-hand corner both horizontal boxes are stating that the size is 7x5. I have double checked all the settings. Using a Epson 4900 printer sent to US letter, the only thing that is checked is zoon to fit, rotate to fit and show guides. am I doing something wrong or is this a program error that needs to be addressed?
View 1 Replies
View Related
Aug 2, 2012
how to create a brush stroke with a point on both ends? It's fairy easy to create a stroke with a point on the front end using the Shape Dynamics, but how do I create a point on the tail end as well? I have a Wacom pen and even the sensitivity function on it can't get a point on both ends no matter how sensitive I draw a quick stroke.
Â
The stroke on the right is the typical brush stroke I get when playing with the "shape dynamics" to get a point on my stroke. The stroke on the left is one I rendered to display how I'd like my strokes to look.
View 2 Replies
View Related
May 15, 2013
take a look to my Panorama, with attention to the sky. [URL]
Â
It is made from this picture: [URL]
Â
There is an error in the stitching because they are from different colors on the sides..
View 2 Replies
View Related
