For some reason when I clip an adjustment to a layer, it doesn't work. Before I clip it though, it works fine, it's only when I clip it to a specific layer, it just instantly removes the adjustment and fails to work. (By this I mean it looks like everything is working fine, with the exception that nothing has changed.) For example, I add a brightness adjustment to a photo, but as soon as I clip it to a layer it just reverts back to before and the layer is clipped. Any adjustments I make while it is clipped doesn't work.
In LR 3.4 I had no problem applying this smart collection onto a specific folder from the library by simply selecting the collection and then pression CTRL (on windows) while I click the folder in question .. that would filter all those photos that I've edited in LR for that folder.
That isn't the case in LR 4.3.
Right now this smart collection is saying I've got 8683 such photos in the collection, and trying the above method to filter just those edited in a specific folder in the library, simply shows all 8683 photos from my entire library.
There is an apply auto tone adjustments checkbox in preferences, but it does not work properly. After checking it, some photos still require to click on auto button on the basic panel.
We have a bunch of shots taken using natural light - the shots all have completely different exposure and white balance adjustments.
Now that the shots feel like they've been shot at the same time of day (and on the same day) we'd like to start adjusting the white balance accross multiple shots - but use the current white balance/exposure from each individual shot as the starting point - not reset the adjustments.
Kind of like baking the current settings or making adjustments on top of current adjustments - or make new adjustments relative to the current adjustments.
I understand the benefit of shooting camera raw and I like the adjustments you can make without effecting the photo itself. The one thing I can't get used to is the limiting workflow in raw that allows you to undo only one change. Being a long time user of Photoshop I'm spoiled by all the image changes I'm allowed to make in combination with one another and the ability to back out of all or some of them.
I'm I missing something in the raw workflow? I wasn't sure if this should be posted in the Photoshop, Bridge or Raw forum. If any of you know of a forum that discuss's this sort of stuff,
What I want to be able to check is the areas of clipping in the shadows and highlights. Now I know Lightroom is very easy in the histogram, having a little warning button that will display when an area is off. What I've come up with so far for Photoshop is that there are only two tools, in the camera raw and in levels. Camera Raw is pretty self-explanitory, but I want to be able to check this in photoshop after I've done some work on the image. So I see that the levels tool you can click and hold on the triangle, and if you press the "Alt" key it will show you what areas are clipped. I'm not sure if I really understand it though, as it shows areas that aren't really clipped, e.g. a slightly darker area of sky is showing as light blue, but not a solid color, as being clipped. What is that?
I think that from the example above that say the reason the sky is showing a little cyan is that the red channel is being clipped in the dark sky only, and not the other channels. Do I need to be concerned about this for a good quality print? For best display on the web?
I have an image that I want to clip out. When it is clipped I want the background to be transparent so that when I import it into a Quark document it only shows the clipped image and I can see the background of the Quark document through it.
Windows 7 and PS CS6. I am trying to use the motion effect "PAN" in PS CS6 but the image is large. 7364 x 1080. It pans but clips the ends. The image in the timeline has a slider at the bottom, I take that to mean the image is to wide for the video frame. How can I use the pan effect in PS cs6 to pan a large panorama ?? I tried splitting the image but the seperate images are not a smooth single image.
initial image was 1.93 gigs as a 16 bit tiff, converted to jpeg 7364 x 1080.
Something happened when I aborted a batch action in ps. Now, every image I open in CR shows the clipped highlights as bright red even B+W CR2's. I have the current patch for cs5 and have re-installed ps with no improvement.
.mov seem to have some clipping happening on import or export from after effects.
i'm getting proresHq clip out of premiere to blur a face, and then i export for the grading in resolve in proresHQ. In Premiere CC, i see those overbright (above 100ire), they are not clip. But this doesn't seem to pass on in after effetcs. I try with the original .MXF, no chance. I mess a lot with Color management. And same thing in CS6. So far, i put my projet in 32bits and then drop my output white to retain a maximum of signal for the colorist. But this is not a viable solution.
I always thought i could import a .mov in after effects, then render in the same codec and obtain the same signal.How can AE, when in 32bits, sees those value but can not write them back on export, in the same codec?
I am new to Corel VideoPro X4 and I am bringing in a fairly big video (3.6gb) with an overall time of 1 minute and 34 seconds. When I import this into X4 it clips the end off at approx 1 minute 30 seconds.
I am designing vector art that is much larger than the default 8.5 x 11. I change the page size to accommodate the art I am creating. When I export the art to EPS, all I get is this 2MB file that contains an image that is 8.5 x 11. What can I do about this?
My prints are getting clipped no matter what I try to do. I am losing approximately 1/8" from all sides of the finished print. From what I can tell, the picture is actually printing larger than the specified size.
This is my process:
In the Develop module I am cropping to the desired aspect ratio using LR presets, then going straight to the print module. My printer is an HP Photosmart C4780. In the Print module I set my margins to 0 and cell size to 4in x 6in. The picture on the screeen looks exactly how I want it to print. I go to Page Setup, select my printer, paper size (borderless 4x6) and orientation, click OK. Then to Print Settings, select the HP paper I am using, click borderless, click save. If I click "scale to fit paper size", I still lose approximately 1/16" on each side. Under Image Settings, I deselect zoom to fill. I have tried selecting it but still experience clipping. I have tried moving the margins in by fractions of an inch and I seem to recover some of the image, but its a long trial and error process that I feel I shouldn't have to do.
A 4x6 test print on regular 8.5x11 paper measures 4-1/8" x 6-1/8". The print layout in LR clearly says 4x6.
I'm splicing together a couple of avi files and outputting as a 720p .wmv. The final file is about 15 minutes long. At each of the straight cuts (I'm not using transitions) in the output file, two or three seconds are cut off! I've tried outputting in different formats and it still occurs, but if I shorten the entire file to a minute or so, it doesn't happen. I've tried it with proxy on and off. I've edited in the very same configuration very often previously and haven't had this problem before.
I'm working with another artist that uses Illustrator CC. When I open the Cc file in my CS6 there is a clipping mask where the art board border is. Also, everything is a mess with all the strokes now separate from the fills (effectively duplicating everything). Is there a setting that would allow a file to be passed back and forth between CS6 and CC that would keep the layers, styles ,and objects the same? As far as I can tell the other artist only grouped the objects and then saved the file in CC before sending to me.
I have clipped the start and end locations on some videos. I then export them with the Vidoe setting of "Original". This is suppost to only maintain the original aspect ratio and FPS.
When I view the exported video it is the same as the original, with the clipped start and end points..If I export to a different format then the edits are included.
I dont work with polygonal VPs or clipped VPs often but sometimes I have to. I recently dicovered in working with 2013 AutoCad that when I create a polygonal VP or clip a VP and place it on defpoints or even a no plot layer, the VP outline still prints???? I'm miffed
I am just trying the Bitmap Tracer tool in XDP7, actually would like only on a part of a picture.
For this clipped that actual part in Clip tool, so in the document only that one can be seen. But in Bitmap Tracer seems that always the whole image analised, how to "real" clip from the picture?
I have clipped a photo to remove the background and now want to replace one of the images in a website gallery. I know I can delete the original image and replace it but is there a way I can drag my new picture over the old one and replace it like I can when I drag an image from the Bitmap Gallery?
I presume it isn't possible as the original image is a square or rectangle that is filled with the bitmap and the clipped image is an irregular shape.
I printed (2) 7x5 Prints using template browser. The top print is getting clipped about a quarter inch.
In the top left-hand corner both horizontal boxes are stating that the size is 7x5. I have double checked all the settings. Using a Epson 4900 printer sent to US letter, the only thing that is checked is zoon to fit, rotate to fit and show guides. am I doing something wrong or is this a program error that needs to be addressed?
On the side of sheets created with the Create Sheets command there is a grey area that masks out the referenced files at the match line. Is there a way to reproduce this without having View Frames and using the Create Sheets? In other words, I a manually creating these plan sheets and I wonder if there is a better way of masking than using wipeout on the sheet tabs.
Windows 7 x 64 Nvidia GeForce GTS 450 8 GB Ram Intel Core i5-2310 @ 2.90 GHz v. F.107.0.0 AutoCAD Civil 3D 2012 SP1
For a project, I happen to have a shape which uses gradient meshes and I need to apply it to the 3D perspective grid. Short of rasterizing and Envelope Distorting everything, which is far more tedious here, the problem I'm having is I can't get clipped areas of a selection to be discarded.
Maybe it sounds too complicated now, but I have a sample file detailing the issue. [URL]
Ideally, I'd want that clipped shape to be workable with its actual visible 4x4 dimensions. Any of the other shortcuts to put this in perspective won't work. Envelope Distort regards the clipped portion. Rasterizing it includes the clipped portion, even if nothing is there. It makes the selection 5x5 when it should be 4x4, the visible portion. The Perspective Selection tool also regards it, offsetting the group by the invisible bounds. What other option do I have left where I can keep the outer clipped shapes, but work wi
Why my 3D view gets cliped when zooming close to an object? I have tried the clipping planes and it says they are off. I have also tried them turned on with the same result.
First one is a screengrab of the drawing I want to print
Second image is of the 'Print Preview' screen.
The printed A1 page reflects the 'Print Preview' image.Objects are 3D solids, with clipped images positioned on the front of them.It was quicker that way, rather than ripping my hair out after trying to tile in a program without any UVW modifiers.It's like the printed viewport reverts to parallel projection, while I want it to be in perspective projection instead.
