WINDOWS
CS2 Photoshop
I just started using CS2 - Can I place an eps image (saved with a clip path created in PSD) into a PSD file? I used to be able to do that in PSD 7.
When I place the eps file into PSD, I don't get the clip I get the entire image.
I made sure that I saved the file with the clip path.
I'm using CS3 on a Mac.
I have an image that I want to clip out. When it is clipped I want the background to be transparent so that when I import it into a Quark document it only shows the clipped image and I can see the background of the Quark document through it.
I have clipped a photo to remove the background and now want to replace one of the images in a website gallery. I know I can delete the original image and replace it but is there a way I can drag my new picture over the old one and replace it like I can when I drag an image from the Bitmap Gallery?
I presume it isn't possible as the original image is a square or rectangle that is filled with the bitmap and the clipped image is an irregular shape.
I am using XDP 6
I have an action in which it will place an image onto an image like a watermark, when i place the image, it is not center by center so i drag it or use keyboard arrows to center and then press enter, then i saw its on the center, but when i save it, the saved image is not on the center, how was that?
Â
you can see that the right side of border it is not centered because the left side border is thicker than right side, here is the part of the action
Â
you can see that i move the image after i place it because its not on the center so adjusting it makes it at the center but the Translate part is not equal.
I used to be able to do this but have forgotten how. I would like to remove the bg from a small image, ie make it's bg transparent, and place that small image on top of a large image, a banner. Not sure what I am doing wrong but when I place the small image on the large one the entire image is transparent, not just the bg.
View 2 Replies View RelatedI cut out a section of a image I wanted to use for a project then I tried to paste into the new project and it pasted with nothing there only a new layer was created without the section of the image I tried to cut.What is the actual process?
View 5 Replies View Relatedi have a shot of a forest with sun rays coming down into it. i want to place a figure of a woman in the rays and make it look real.
View 2 Replies View RelatedI've taken a photo of a monitor. The monitor is OFF so the screen is black. I want to superimpose another image onto the blacked-out screen, so it looks like the monitor is on and displaying a live image.
Â
Apart from the overlay operation, it's complicated by the fact that the image of the monitor is slightly distorted by perspective, while the inserted image is square.
Â
So I guess this means that I need to perspective-isedistort the second image to match the available space on the monitor image.
Â
I'm not unfamiliar with simple PS operations, but this project is a little outside my range of expertise.Â
Â
However, I assume that the first step will be to get both images to the same density. The monitor pic is currently at 180 pixelsinch while the pic to be overlaid is 95.987 pixelsinch.
this is not difficult, but I'm not sure how to make this correctly: want just place my text over an image(jpeg format). I've confused with layers and foreground. PS7.0
View 9 Replies View RelatedHow did they get the "Matrix" fout, and use it to replace "Matrix" with "Ghetto?"
View 2 Replies View Relatedhow to take things from one image and place it other.
In the tutorial the guy took himself out of his his everyday photos and placed himself in photos with sceneries and people from other countries and called it his digital vacation.
Unlike most of these cheesy tutorials all of his looked like he was really there in these scenes even placed in groups of people it looked real.
I didn't even think about it then but I'd like to do some of that with pictures I have but can't for the life of me find a good tutorial on how to do it. There's so many websites anymore and most of them are just for Adsense with 100's of links.
how to create a piece of text that has an image for the body of the text, not just a colour.
View 4 Replies View RelatedOn Photoshop CS4 - I want to place a 2d image onto a curved 3d object so that the object rotates with the picture curved right onto it. How do you achieve this?Â
View 4 Replies View Relatedhow do i take an image from one picture and place it into a different photo?
View 1 Replies View RelatedOn adobe photoshop, I know that there is a program that automatically resizes images for you.
I'm pretty sure there is program that automatically puts an image on each photo for you, that you choose in a folder.
Ex: How do you put your logo on the bottom of the right corner (or anywhere) on all the photos you put in a folder?
I need to prepare an image for professional printing and I want to retain as much quality as is possible.
The final file needs to be a 300ppi sRGB jpg.
Â
The print needs to have a large white border so I am 'placing' the image into a new file where the canvas serves as the border.
Â
In other words, I'm placing an 8x10 image into a new 12X14 file.
Â
My question is: how do ensure that the quality of the original 8x10 image is not affected?
Â
My current workflow is as follows:
Â
1. Save the 8x10 as a 300ppi, 16bit, prophoto tif.
2. Create a new file with the dimensions of 12x14, 300ppi, 16bit, prophoto.
3. Place the 8x10 image into this file.
4. Save for web & devices at JPEG, 100 Quality, Convert to sRGB
I have received permission to use the attached logo (1st image) on a business card for a project.
Â
I want to place it on a blue background, so I've copied the type in Illustrator switched the colors so everything can be read against blue and worked well. However, I can't seem to get whatever file type I place of the shield in Illustrator (tiff, jpg, gif) to not have white pixels around it. You'll see what I mean in the attached 2nd image.
Â
I made a selection of the shield and then did a layer mask of the rest of the logo. There are some extra pixels but some are so small that I don't think I can get them all. I've tried placing the logo in InDesign too and there is the same issue.
I read a little about using the displace filter to do what I want but could not get it done properly.
I have a nice "golf ball" image. and I want to put a logo on it and have the logo image flow right down into the dimples like it would be on a real golf ball.
I'll attach the images I'm woking with. If you can give me a step by step procedure I would really appreciate it. I need to get this done but I would also like to understand how to do it so I can be a better photoshop user in the future.
I want to remove a person from one image and place them in another.
View 8 Replies View RelatedIn Elements 7, how do I fade the image so that I can place text over.?
View 4 Replies View RelatedHow can I copy an image from a photo and place it in another. Is there video on this? I cannot find one.
View 2 Replies View RelatedFor some reason when I clip an adjustment to a layer, it doesn't work. Before I clip it though, it works fine, it's only when I clip it to a specific layer, it just instantly removes the adjustment and fails to work. (By this I mean it looks like everything is working fine, with the exception that nothing has changed.) For example, I add a brightness adjustment to a photo, but as soon as I clip it to a layer it just reverts back to before and the layer is clipped. Any adjustments I make while it is clipped doesn't work.
View 2 Replies View RelatedWhat I want to be able to check is the areas of clipping in the shadows and highlights. Now I know Lightroom is very easy in the histogram, having a little warning button that will display when an area is off. What I've come up with so far for Photoshop is that there are only two tools, in the camera raw and in levels. Camera Raw is pretty self-explanitory, but I want to be able to check this in photoshop after I've done some work on the image. So I see that the levels tool you can click and hold on the triangle, and if you press the "Alt" key it will show you what areas are clipped. I'm not sure if I really understand it though, as it shows areas that aren't really clipped, e.g. a slightly darker area of sky is showing as light blue, but not a solid color, as being clipped. What is that?
Â
I think that from the example above that say the reason the sky is showing a little cyan is that the red channel is being clipped in the dark sky only, and not the other channels. Do I need to be concerned about this for a good quality print? For best display on the web?
I have made a click able image in CS6 but when I save it to my computer as a GIF, I'm not able to click on it. I'm saving the file as an "Image" and not using "HTML and Images" as I can't find a way to place HTML files on my website.
View 3 Replies View RelatedI know how to batch process images to place a logo or watermark on an image. Normally the image is different every time and the exact same logo is placed on all the images.
In this case the image is exactly the same every time but i need it saved in a folder 100 times each with a different logo. So essentially a reverse of the normal process. Same image different logo's.
I am using Photoshop cs6. I purchased a template for magazine advertising purposes. The images have been taken out but there are custom designed objects (masked shapes) where I am supposed to place my images. When I attempt to place a photo into one of the shapes, using the Place Command, it does not work.Â
How can I place an image into one of the objects?
JPEG's are opening in CS6 (32 and 64) with a partial gray/white mask in place. Resizing usually makes them disappear but they shouldn't be there to begin with. OS is Win7. The files display fine in Bridge and other applications.
View 10 Replies View RelatedIm using PSE 11. How do I remove an image from a green screen and place on a different background?
View 1 Replies View RelatedWindows 7 and PS CS6. I am trying to use the motion effect "PAN" in PS CS6 but the image is large. 7364 x 1080. It pans but clips the ends. The image in the timeline has a slider at the bottom, I take that to mean the image is to wide for the video frame. How can I use the pan effect in PS cs6 to pan a large panorama ?? I tried splitting the image but the seperate images are not a smooth single image.
Â
initial image was 1.93 gigs as a 16 bit tiff, converted to jpeg 7364 x 1080.Â
Something happened when I aborted a batch action in ps. Now, every image I open in CR shows the clipped highlights as bright red even B+W CR2's. I have the current patch for cs5 and have re-installed ps with no improvement.
View 1 Replies View RelatedRecently updated to CS6 but one thing very frustrating is that File>Place does not work. When I select it a window will pop up, but as soon as I select any image from the window the entire Illustrator application stops working.
Â
I was forced to switch back to CS5.