After Effects :: Why Is Clipped Value Above 100 Ire

Aug 11, 2013

.mov seem to have some clipping happening on import or export from after effects.
 
i'm getting proresHq clip out of premiere to blur a face, and then i export for the grading in resolve in proresHQ. In Premiere CC, i see those overbright (above 100ire), they are not clip. But this doesn't seem to pass on in after effetcs. I try with the original .MXF, no chance. I mess a lot with Color management. And same thing in CS6. So far, i put my projet in 32bits and then drop my output white to retain a maximum of signal for the colorist.
But this is not a viable solution.

I always thought i could import a .mov in after effects, then render in the same codec and obtain the same signal.How can AE, when in 32bits, sees those value but can not write them back on export, in the same codec?

View 9 Replies


ADVERTISEMENT

VideoStudio :: Video Being Clipped

Nov 14, 2011

I am new to Corel VideoPro X4 and I am bringing in a fairly big video (3.6gb) with an overall time of 1 minute and 34 seconds. When I import this into X4 it clips the end off at approx 1 minute 30 seconds.

The file is an .avi if this matters.

View 1 Replies View Related

CorelDRAW X4 :: Export EPS Clipped

Sep 16, 2013

I am designing vector art that is much larger than the default 8.5 x 11. I change the page size to accommodate the art I am creating. When I export the art to EPS, all I get is this 2MB file that contains an image that is 8.5 x 11. What can I do about this?

View 6 Replies View Related

Lightroom :: Why 4x6 And 5x7 Prints Being Clipped

Mar 1, 2013

My prints are getting clipped no matter what I try to do.  I am losing approximately 1/8" from all sides of the finished print.  From what I can tell, the picture is actually printing larger than the specified size.
 
This is my process:
 
In the Develop module I am cropping to the desired aspect ratio using LR presets, then going straight to the print module.  My printer is an HP Photosmart C4780. In the Print module I set my margins to 0 and cell size to 4in x 6in.  The picture on the screeen looks exactly how I want it to print. I go to Page Setup, select my printer, paper size (borderless 4x6) and orientation, click OK. Then to Print Settings, select the HP paper I am using, click borderless, click save.  If I click "scale to fit paper size", I still lose approximately 1/16" on each side. Under Image Settings, I deselect zoom to fill.  I have tried selecting it but still experience clipping. I have tried moving the margins in by fractions of an inch and I seem to recover some of the image, but its a long trial and error process that I feel I shouldn't have to do.
 
A 4x6 test print on regular 8.5x11 paper measures 4-1/8" x 6-1/8".  The print layout in LR clearly says 4x6.

View 12 Replies View Related

Photoshop :: Clipped Adjustments Not Working?

Oct 27, 2012

For some reason when I clip an adjustment to a layer, it doesn't work. Before I clip it though, it works fine, it's only when I clip it to a specific layer, it just instantly removes the adjustment and fails to work. (By this I mean it looks like everything is working fine, with the exception that nothing has changed.) For example, I add a brightness adjustment to a photo, but as soon as I clip it to a layer it just reverts back to before and the layer is clipped. Any adjustments I make while it is clipped doesn't work.

View 2 Replies View Related

Photoshop :: Identifying Clipped Areas

Nov 6, 2013

What I want to be able to check is the areas of clipping in the shadows and highlights. Now I know Lightroom is very easy in the histogram, having a little warning button that will display when an area is off. What I've come up with so far for Photoshop is that there are only two tools, in the camera raw and in levels. Camera Raw is pretty self-explanitory, but I want to be able to check this in photoshop after I've done some work on the image. So I see that the levels tool you can click and hold on the triangle, and if you press the "Alt" key it will show you what areas are clipped. I'm not sure if I really understand it though, as it shows areas that aren't really clipped, e.g. a slightly darker area of sky is showing as light blue, but not a solid color, as being clipped. What is that?
 
I think that from the example above that say the reason the sky is showing a little cyan is that the red channel is being clipped in the dark sky only, and not the other channels. Do I need to be concerned about this for a good quality print? For best display on the web?

View 6 Replies View Related

VideoStudio :: Cuts Are Clipped On Output?

Feb 9, 2011

I'm splicing together a couple of avi files and outputting as a 720p .wmv. The final file is about 15 minutes long. At each of the straight cuts (I'm not using transitions) in the output file, two or three seconds are cut off! I've tried outputting in different formats and it still occurs, but if I shorten the entire file to a minute or so, it doesn't happen. I've tried it with proxy on and off. I've edited in the very same configuration very often previously and haven't had this problem before.

View 5 Replies View Related

Photoshop :: Can I Place An Clipped Eps Image Into A

Oct 15, 2008

WINDOWS

CS2 Photoshop

I just started using CS2 - Can I place an eps image (saved with a clip path created in PSD) into a PSD file? I used to be able to do that in PSD 7.

When I place the eps file into PSD, I don't get the clip I get the entire image.

I made sure that I saved the file with the clip path.

View 4 Replies View Related

Illustrator :: CC File Clipped Upon Import Into CS6

Aug 29, 2013

I'm working with another artist that uses Illustrator CC. When I open the Cc file in my CS6 there is a clipping mask where the art board border is. Also, everything is a mess with all the strokes now separate from the fills (effectively duplicating everything). Is there a setting that would allow a file to be passed back and forth between CS6 and CC that would keep the layers, styles ,and objects the same? As far as I can tell the other artist only grouped the objects and then saved the file in CC before sending to me.

View 1 Replies View Related

Illustrator :: CS6 Clipped Gaussian Blurs

Aug 27, 2012

Object above is just a typical path.Below is a copy with a 51px Gaussian Blur applied. (using 300DPI Raster Effects Settings).

View 3 Replies View Related

Lightroom :: Exported Video Is Not Clipped

Mar 18, 2012

I have clipped the start and end locations on some videos. I then export them with the Vidoe setting of "Original". This is suppost to only maintain the original aspect ratio and FPS.
 
When I view the exported video it is the same as the original, with the clipped start and end points..If I export to a different format then the edits are included.

View 1 Replies View Related

AutoCAD Architecture :: Polygonal Or Clipped Viewports

Dec 6, 2013

I dont work with polygonal VPs or clipped VPs often but sometimes I have to. I recently dicovered in working with 2013 AutoCad that when I create a polygonal VP or clip a VP and place it on defpoints or even a no plot layer, the VP outline still prints???? I'm miffed

View 5 Replies View Related

Photoshop :: Transparent Background On Clipped Image

Dec 2, 2007

I'm using CS3 on a Mac.

I have an image that I want to clip out. When it is clipped I want the background to be transparent so that when I import it into a Quark document it only shows the clipped image and I can see the background of the Quark document through it.

View 2 Replies View Related

Xara :: Bitmap Tracer On Clipped Photo?

Mar 25, 2012

I am just trying the Bitmap Tracer tool in XDP7, actually would like only on a part of a picture.

For this clipped that actual part in Clip tool, so in the document only that one can be seen. But in Bitmap Tracer seems that always the whole image analised, how to "real" clip from the picture?

View 3 Replies View Related

Xara :: Replacing Gallery Image With Clipped Pic?

Jul 31, 2011

I have clipped a photo to remove the background and now want to replace one of the images in a website gallery. I know I can delete the original image and replace it but is there a way I can drag my new picture over the old one and replace it like I can when I drag an image from the Bitmap Gallery?

I presume it isn't possible as the original image is a square or rectangle that is filled with the bitmap and the clipped image is an irregular shape.

I am using XDP 6

View 3 Replies View Related

Lightroom :: Top Print Is Clipped A Quarter Inch

May 8, 2012

I printed (2) 7x5 Prints using template browser. The top print is getting clipped about a quarter inch.
 
In the top left-hand corner both horizontal boxes are stating that the size is 7x5.  I have double checked all the settings. Using a Epson 4900 printer sent to US letter, the only thing that is checked is zoon to fit, rotate to fit and show guides. am I doing something wrong or is this a program error that needs to be addressed?

View 1 Replies View Related

Photoshop :: Large Still Panorama In CS6 Video Clipped On Ends

Aug 7, 2013

Windows 7  and PS CS6.  I am trying to use the motion effect "PAN"  in PS CS6 but the image is large.  7364 x 1080.  It pans but clips the ends.  The image in the timeline has a slider at the bottom, I take that to mean the image is to wide for the video frame.  How can I use the pan effect in PS cs6 to pan a large panorama ??  I tried splitting the image but the seperate images are not a smooth single image.
 
initial image was 1.93 gigs as a 16 bit tiff,  converted to jpeg 7364 x 1080. 

View 5 Replies View Related

Photoshop :: When Open File In CR All Of Clipped Highlights Bright Red?

Jan 17, 2013

Something happened when I aborted a batch action in ps. Now, every image I open in CR shows the clipped highlights as bright red even B+W CR2's. I have the current patch for cs5 and have re-installed ps with no improvement.

View 1 Replies View Related

CorelDRAW X4 :: Separate Colors In The Object That Is Power-clipped?

Jan 17, 2012

How do I separate colors in the object that is power-clipped? 

View 8 Replies View Related

CorelDRAW X6 :: Save As SVG - Stars No Longer Power Clipped

Mar 1, 2013

I have some text with stars powerclipped inside of wording. When I save as svg and open in sure cuts alot the stars are no longer power clipped.

View 3 Replies View Related

AutoCAD Civil 3D :: Masked Area On Clipped Sheets

Apr 26, 2012

On the side of sheets created with the Create Sheets command there is a grey area that masks out the referenced files at the match line.  Is there a way to reproduce this without having View Frames and using the Create Sheets?  In other words, I a manually creating these plan sheets and I wonder if there is a better way of masking than using wipeout on the sheet tabs.

Windows 7 x 64
Nvidia GeForce GTS 450
8 GB Ram
Intel Core i5-2310 @ 2.90 GHz
v. F.107.0.0 AutoCAD Civil 3D 2012 SP1

View 3 Replies View Related

Illustrator :: Discard Clipped Sections Of Clipping Mask?

Nov 20, 2013

For a project, I happen to have a shape which uses gradient meshes and I need to apply it to the 3D perspective grid. Short of rasterizing and Envelope Distorting everything, which is far more tedious here, the problem I'm having is I can't get clipped areas of a selection to be discarded.
 
Maybe it sounds too complicated now, but I have a sample file detailing the issue. [URL]
 
Ideally, I'd want that clipped shape to be workable with its actual visible 4x4 dimensions. Any of the other shortcuts to put this in perspective won't work. Envelope Distort regards the clipped portion. Rasterizing it includes the clipped portion, even if nothing is there. It makes the selection 5x5 when it should be 4x4, the visible portion. The Perspective Selection tool also regards it, offsetting the group by the invisible bounds. What other option do I have left where I can keep the outer clipped shapes, but work wi

View 4 Replies View Related

AutoCAD Civil 3D :: View Gets Clipped When Zooming Close To Object

Jul 10, 2012

Why my 3D view gets cliped when zooming close to an object? I have tried the clipping planes and it says they are off. I have also tried them turned on with the same result.

View 1 Replies View Related

AutoCAD 2013 :: Objects Are 3D Solids - With Clipped Images Positioned On Front Of Them

Nov 20, 2012

First one is a screengrab of the drawing I want to print

Second image is of the 'Print Preview' screen.

The printed A1 page reflects the 'Print Preview' image.Objects are 3D solids, with clipped images positioned on the front of them.It was quicker that way, rather than ripping my hair out after trying to tile in a program without any UVW modifiers.It's like the printed viewport reverts to parallel projection, while I want it to be in perspective projection instead.

View 6 Replies View Related

AutoCAD 2013 :: Dynamic Block Clipped Boundary Doesn't Work As Expected?

Dec 19, 2013

I found an interesting dynamic block. It has a clipping boundary  but you can drag the 'leg' out of the boundary. How can I make such block?

See attached dwg file.

View 7 Replies View Related

Photoshop Elements :: Moon Effects - View Both Layers And Effects Panel At Same Time?

Apr 9, 2013

I have PSE11 and purchased Paint the Moon effects.  How can I view both the Layers panel and the Effects panel at the same time?  Was this an option in older versions of PSE that are used in the Paint the Moon tutorials?

View 2 Replies View Related

Paint Shop Pro :: Instant Effects In X5 - How To Make User Defined Effects

Sep 2, 2013

In PSP X5 I'm pretty sure there's a way to make User Defined Instant Effects in the Adjust mode, but I can't find the steps in the Help Files. I'm thinking these are just scripts, but I'm not sure.

View 1 Replies View Related

After Effects :: Way To Export Flash Vector Animation To After Effects Keeping It Editable?

Aug 7, 2013

I have a flash animation, just shapes and tweening. I was wondering if there's a way to convert it to After Effects but keeping it editable (i.e. getting AE shapes and keyframes).

View 1 Replies View Related

Photoshop Elements :: Adding Personal Effects To The Effects Panel?

Sep 2, 2013

after editing an effect from the panel (such as adjusting the levels of a drop shadow), to add it to the effects panel?

View 2 Replies View Related

After Effects :: Decoupling Keyframes From Audio File For Dynamic Effects

Oct 17, 2013

I have created keyframes from audio file and used them to generate some effect, all works fine, it is amazing how easy it is However, I would like to generate flash (?) so that these effects would be dynamic to different audio files after export.

What I want is basically to create effects that can be used in life event to the streaming music.

View 4 Replies View Related

After Effects :: CS6 Opening With A Lot Of Alarms Related To Effects Redundancies With Other Programs?

Feb 21, 2013

After intalling Premiere pro CS6 and After effects CS6, I installed add-ons for these programs (newblue, boris, prodad...). When I open After Effects it gives me 38 cases of effects (Detail Enhancer, noise Reducer...) redundant in other programs, telling me to get rid of them.

When I check these effects in my programs, they are mainly .aex files, located in Premiere Pro CS6, Adobe Common Plug-ins, NewBlue Video effects collections 1 to 6. Some of them also exist in avid /pinnacle studio programs (my former video tools I still use to close previous video projects) before concentrating in Adobe CS6 suite. I don't know what to remove in a safe way. Premiere pro CS6 doesn't worry about redundancies ! Only After Effects...

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved