Photoshop :: Lines With Rounded Ends
Aug 15, 2006way to draw lines (with the line tool) with rounded ends? Something like the arrow head option except with semi-circles?
View 1 Replies
ADVERTISEMENT
Illustrator :: How To Slant The Ends Of The Lines All At Once
May 28, 2012I'm using Illustrator CS5 - I've been trying to figure out a way to slant the ends of the lines all at once, or to create them to begin with. I've searched for a method to do this until my eyes gave out (including youtube how to's). What I've been doing is creating the lines, drawing guides, expanding the lines, then dragging each endcap anchor point to intersect with the guide and this is taking a bit longer than I would like. Is there a quicker way to get the lines in the top image to look like those in the bottom image? specifically the slant on the endcaps?
View 5 Replies View RelatedAutoCAD Map 3D :: Stylize SHP File Lines So That They Have Flat Ends
Mar 29, 2012I am trying to stylize my .shp file lines so that they have flat ends.
View 2 Replies View RelatedAutoCAD 2010 :: Splines Are Drawn By Connecting Ends Of Two Lines
Oct 18, 2012I use splines a lot to provide a contiuous smooth curve between two lines which are co-planar. The splines are drawn by connecting the ends of the two lines and then the tangent direction set by hovering over the end grips. I then use the FLATEN command to convert these splines to polylines that can have their lineweights set to a value other than 0. My problem is that sometimes when i use the FLATTEN command, the spline is erased.
View 7 Replies View RelatedAutoCad :: Command Or LISP To Delete Lines Not Connected At Both Ends?
Nov 11, 2012I'm working on a project that details with topo lines. I have the contours, however because I imported them as DWG's from sketchup they're a bit messy. Basically, instead of being one continuous line, their endpoints intersect and overlap, making it look very messy. Is there anyway I could delete these extra lines? I tried the overkill command to no avail.
View 3 Replies View RelatedIllustrator :: Drawing Brush Stroke Lines With Tapered Ends At Any Angle
Jan 31, 2013I'm trying to match the style of an illustration done by someone outside my company; all the lines taper at both the ends like an actual brush stroke, but when I used the brush tools I have to change the angle to get the tapered look - is there a trick to this? It's not efficient to have to stop and change the angle of the tool for every stroke -
View 7 Replies View RelatedXara :: Circles And Rounded Rectangles Have Jagged Lines
Jan 20, 2012When I drag out a circle, or use the node to curve the corners of a rectangle, the line isn't smooth. It looks like it's slightly jagged.
I'm trying to create a drawing which features the rounded edge of a playing card, with no luck. It simply doesn't look good.
AutoCad :: Showing Rounded Corners In Viewport Without So Many Lines?
Mar 22, 2012I have a piece of my 3D model (it's a square tube with rounded corners) that I'm trying to display in a viewport in 2D but there are too many surface lines on the corners. Is there a way to display the rounded corners as sharp edges and the hidden lines of the object?
View 9 Replies View RelatedCorelDRAW Graphics Suite X3 :: How To Make Lines Rounded To Look Like Wire Or Pipes
Feb 17, 2013We work on animal designs for our jewelry. We would like to make lines going around the designs like a frame that would look like a rounded wire or pipe.
Handcrafted unique jewelry created in animal, wildlife, flower and western designs.
Photoshop :: Rounded Rectangle - Extend Without Losing Original Rounded Corner
Jul 27, 2012I have a rounded corner rectangle in a template that I am working on..I would like to extend the vertically but keep the rounded edge dimensions the same as I extend vertically.
Â
Right now I extend the rectangle but the edges also extend.
Photoshop :: Rounded Frame Rounded Photo
Jun 28, 2006How do I make the frame & photo rounded just like they did in the following template I'm working on in Flash. They say they did it in Photoshop.
I used the rectangel tool and it always makes the photo inside out. I need it to round the edges not hide the photo. Is there a way to show the middle of the photo and then make a frame like they did on the website?
I'm using Photo Shop Elements.
Photoshop :: Soft Ends
Nov 13, 2007Im using the pen tool and stroking it with the brush tool and clicking the stimulate pressure setting but I still get hard edges at the end of the strokes.
View 1 Replies View RelatedPhotoshop :: Path Transparent At Ends
Oct 17, 2013Ok, its really hard to describe this in words, so here is a picture!
So this is just a normal path that I hit the stroke button on. The problem is, it goes from lighter to darker at either end of the path. This may look good now, but I don't want it! I want it to be the same opacity/transparency all the way through the path stroke.
Â
I'm sure I just have some weird box checked.Â
Photoshop :: Line With Faded Ends
Oct 24, 2007I've been trying to make lines like these to no luck:
I'm aware this can be achieved with the pen tool. Path stroked with a brush with some settings altered. Most likely Fade.
This is where I am so far:
Problems:
I cant get BOTH ends to fade.
A long path wont get fully stroked since the fade happens too soon.
Photoshop :: I Save As Tiff, But Ends Up As Micrsoft...
Jul 18, 2009I save an image as a tiff in CS2, but when I view the image details in the folder it reads as amicrosoft office document imaging file.. I have been saving as tiffs for years, but only recently has this started happening.
View 4 Replies View RelatedPhotoshop :: Large Still Panorama In CS6 Video Clipped On Ends
Aug 7, 2013Windows 7 and PS CS6. I am trying to use the motion effect "PAN" in PS CS6 but the image is large. 7364 x 1080. It pans but clips the ends. The image in the timeline has a slider at the bottom, I take that to mean the image is to wide for the video frame. How can I use the pan effect in PS cs6 to pan a large panorama ?? I tried splitting the image but the seperate images are not a smooth single image.
Â
initial image was 1.93 gigs as a 16 bit tiff, converted to jpeg 7364 x 1080.Â
Photoshop :: How To Create A Brush Stroke With Point On Both Ends
Aug 2, 2012how to create a brush stroke with a point on both ends? It's fairy easy to create a stroke with a point on the front end using the Shape Dynamics, but how do I create a point on the tail end as well? I have a Wacom pen and even the sensitivity function on it can't get a point on both ends no matter how sensitive I draw a quick stroke.
Â
The stroke on the right is the typical brush stroke I get when playing with the "shape dynamics" to get a point on my stroke. The stroke on the left is one I rendered to display how I'd like my strokes to look.
Photoshop Elements :: Make A Smooth Transition In Two Ends?
May 15, 2013take a look to my Panorama, with attention to the sky. [URL]
Â
It is made from this picture: [URL]
Â
There is an error in the stitching because they are from different colors on the sides..
Photoshop :: Monochrome Curve Layer / Flipping Scale Ends
Feb 13, 2013On PS CS6 Extended 64 & 32 bit I noticed the gray scale ends of the curve in monochrome images is, to my mind, flipped. I understand some of the historic reasons for this, but I though I had found a preference somewhere or flipped the ends in previous versions. It has been a while. My most current version previously was CS2.
Â
I'm also looking for, and will post separately, something akin to the Photo bars add on from Extensis. I still can't believe how backward the Adobe development team appear to be in terms of interface usability design. There are many multi-click patterns I use repeatedly and something like Photobars, even an add-on would be acceptable.
Photoshop :: Make Straight Lines? Horizontal Lines? Vertical Lines? Curves?
Aug 17, 2003how do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies View RelatedAutoCad 2D :: Make New Linetype Ends Even?
Dec 5, 2012I have just made a new linetype but the ends look funny...I can't see why the ends, before and after the slash are different lengths? How to make them more even?
View 9 Replies View RelatedGIMP :: Where The Drop Shadow Ends
Jan 29, 2012I find out I didn't leave enough room for a drop-shadow effect to end smoothly, rather than being cut off where I cropped the image. Is there an easy way to know exactly where the drop shadow ends, exactly where it's safe to crop the image?
see the bottom edge of the attached example image.
Paint.NET :: How Do Fade Out Ends Of Image
Aug 26, 2012I want to know how to fade something out. Like how the gradient tool works, but instead of a color, I just want it to be from background to transparent.
Lets say I have a line as my image, and that's all that's there. The background is transparent (no white background, in the program it's displayed as a white/gray grid of small blocks)
___________________
Theres my line. It's nice but I want the ends to smoothly fade out into the transparency. Like this
....,,,,________________,,,,....
I know that's a bad example, but where the line is full and thick is where it is just that. Full, thick, it's the line! But then the comma's, say thats where it starts to fade, by the end of the comma's, the line is 50% transparent. By time it hits the periods its faded by a lot, and goes from 50% transparent, to completely transparent.
I hope you understand what I'm talking about. And for actual use, I wont be fading a straight line. More a a curved design that I've cropped and want to have fade out on the ends.
After Effects :: Ends A Render When Alt Tab To Premiere?
Feb 6, 2014If I have a render in progress and I alt tab or to premiere or open premiere/media encoder, the render in after effects wit hthe "happy ring of success" noise. but the file is incoplete and the render has stopped part way done.
Â
OSX maveriks.
Â
current creative cloud versions (7/2/2014)
CorelDRAW X5 :: Resampling Size And DPI Ends Up Blurry?
May 15, 2013Everytime I Resample pictures that are big in size, and resolution, and I reduce the resolution and the size, the end result is always blurry. (doesn't matter if I use Draw or Paint)
- image is 39.4"w by 29.556"h @ 72 DPI, RGB, JPG (when opened in Paint or imported into Draw)
- I want it to be .976"w by .736"h @ 300 DPI ... yes alot smaller
Ultimately, once at the small size, I need to take all artwork (bitmaps, text etc) and make one 300 DPI bitmap to be run on the press.
I have tried ...
- Resampling the original sized image, that is 72 DPI, into 300 DPI and then Resampling the size from there and end up with Blurry (left on Anti-Alias and Maintain aspect ratio)
- Resampling size and DPI, in one step, and end up with Blurry (left on Anti-Alias and Maintain aspect ratio)
- made the image proportionately smaller (now DPI is 2,089) and then Convert into 300 DPI image, and end up with Blurry
AutoCAD Inventor :: How To Shorten Shaft By Using Ends
Feb 28, 2012I am using the design accelerator to create a shaft with multiple features. Works well. This shaft is 90"+ in length and although I realize we create in full scale, having it display into my drawing in full scale is unnecessary because one diameter is nearly 60" long. As such I would like to shorten it by using a shaft end, but cannot figure how to do it.
Just to be clear, by shaft end (term used in Mechanical) I refer to the squiggly lines that basically fudge the OAL of a component.
AutoCad :: Drawing Line With One Or Two Arrow Ends?
Mar 20, 2007I am now using AutoCAD 2007 and I am a new AutoCAD user. How can I draw a vector or a line with one or two arrow ends in AutoCAD ? It is really simple to do that in MS Word
View 9 Replies View RelatedAutoCAD Architecture :: Roof Ends Disappearing
Mar 21, 2011Im new to autocad and started designing my own house in archictecture 2010.
I've been having a propblem with the roof design at the moment, i am trying to get the gable ends of the roof to stand up on a 90 angle on both sides by editing the edges/faces but every time i do this the roof ends disappear so theres a hole in the sides of the roof and you can see into the house. How to do this so they do not disappear?
Illustrator :: Parallel Line Ends Not Opened?
Oct 16, 2013I did a parallel line using White Arror Select> Copy> Object> Path > offset. I got the parallel lines but the ends are not opened. It was Mitre selected in the popup box. Here is the image:
View 9 Replies View RelatedVideoStudio :: Keep A Video Display Its Last Frame After It Ends Play?
Dec 8, 2012Is there a way to keep a video display its last frame after it ends play?
In this scenario lets say I have to overlays each with a video on them.Video A takes half the display and Video B takes the other half - so that they are side to side.
They are staggered in playback where the first ( Video A ) plays first and ends first and the second ( Video B) begins mid-way through when Video A plays.
I would like Video A to not go away after play but rather remain "still" on the last frame while Video B continues playing.
AutoCAD Inventor :: Views Background Update Never Ends
Nov 6, 2012When I open a drawing, Inventor 2012 update views. The default option is Background update". The problem is the update never ends... I can use Inventor, but the background update is ne finished, so I can't print a correct drawing.
If I disable Back upDate it is ok, but how can I use it ?