We work on animal designs for our jewelry. We would like to make lines going around the designs like a frame that would look like a rounded wire or pipe.
Handcrafted unique jewelry created in animal, wildlife, flower and western designs.
8004.rounded logo.pdf
how to make a star rounded object like the in the picture if im correct in uploading it
arrows.jpg
I need to make lines of different thicknesses, with arrowheads. However, when I increase the line width the arrowhead should not be proportional. It need to stay a bit smaller.
Example: if the line is expanded to "Thick 3", I need the arrow keeps equivalent to "Thick 2" - for aesthetic reasons.I can do edit as I show in the bottom of the sample picture.
However, I need to build HUNDREDS of arrows of different sizes.Is there any way (Macro function?) permitting I enlarge/reduce line thickness and allowing me to edit the arrow without changing the line thickness?
Important Note: Is not enough I edit some arrows and save them as a kind of Template, then import them to work. The arrows have different ways in thickness and may be straight, curved, winding, etc.. Hence the need to edit the edges easily.
I have prepared a calender where all the rectangles are rounded cornered and now client is asking acute angles without corners how to bring back them to without corners. Since selecting each objects and using shape tool and to unround them consuming.
View 6 Replies View RelatedWhat I do not like is that I draw a rectangle and then add the radius corners and it is fine.
If I then drag the box taller or wider the radius of the corner changes too. But also I have noticed that it does this even if you drag the box to size first then add the radius corners.
example: I make up a rectangle and add start adding text. Then I have to make the box bigger so I do that, finish adding my text. Now go to add in the radius corner and they are all skewed out of shape. This seems to be because I have dragged that rectangle bigger that what it was when I first dragged it into place.
Is there a way around this so that I can make my rectangle say 250 wide by 50 tall. Then later on change it's size and add radius corners and make it so the corners are all even and not all out of proportions?
When i tried to add an inside contour to a simple square with rounded corners......the inside contour is missing the rounded corners but when you add a contour to the outside of the square with rounded corners...the corners are round.
View 4 Replies View RelatedIs there a way to make a object with straight lines to change the straight line to be undulated like a curly.
View 14 Replies View RelatedWe are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View Relatedcan i make halftones from a cdr file to make printing offset plates?
View 3 Replies View RelatedI am trying to set the cut lines around a font that is an outline font and I can't get it to work - the outline just turns into the cut line and doesn't cut the font that I need.
View 14 Replies View RelatedI have a group of images that I am working on in Corel Draw x5. They are drawings, I scanned them as black/white images then used the "outline trace to clipart" feature to get good images.
I want to thicken the lines but if I use the outline pen tool to change the thickness it draws a box around my images. Is there a way to thicken the lines without getting the box?
circle.cdr
I want to remove the circle where the bulldog overlaps it but I just can't get it figured out.
MGD 64 lemonade to forum.cdr
This isn't something I am in need of because in the future with this graphic I would just convert the background. Just wondering why it made those odd lines coming off of the words and the black bar (I don't know how the heck you guys can post large things, things with motion, etc. I have to make things miniature to put them on here)
I assume it has something to do with how the original, that came from MillerCoors, has those layers of lines in it. I just don't get why lines would then be visible when I changed it since nothing like that has happened before. Oh, and if you are wondering why I converted it, it's because I knew my rip server wouldn't like all that stuff going on in the original
A customer sent me a jpeg of a white dove that they want printed on vinyl and then contour cut to put on their travel trailer. The picture was a very low dpi and I scanned it and increased the dpi to 150. I tried to trace it, but it just would not come out right.
My question is -- Can I put cutting lines around the dove as a bitmap and then be able to print and contour cut it out?
LINE.pdf
I need to draw curved lines as per attachment.
how to make the thee grid lines in a table go away - how to make the lines ofthe table totally invisible?
View 1 Replies View RelatedI am trying to setup an 8.5 X11 sheet on landscape to do a brochure but I cannot add any bleed lines on user defined presets.
When I go to layout>page setup>guidelines>presets>user defined presets. It only gives me the options for margins and # of columns and the distance apart.....but no bleed area
The only way I can add bleed to the layout is when I go to layout>page setup>size (bleed .125")>guidelines>presets>corel presets> check three column newsletter and check bleed area. But then I cannot adjust the distance apart during setup.
Is there any way to import DWG/DXF files with measure lines with arrows.
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
When I changed a line to dotted one, after each diagram like circle, triangle etc are appearing in dotted. How can i change to normal?
View 1 Replies View RelatedHow i can weld objects to just add points wherever two line cross each other?
View 14 Replies View RelatedI'm trying to create dotted lines that are actually circles and not square shaped dots (the given option in the outline menu). Is the best/only way to do this by creating a new Artistic Media Brush? It seems like there should be an easier option when needing to create a long dotted line or a shape with a dotted outline.
View 14 Replies View RelatedFrom my vecor drawing program i export a file as DXF/DWG.
Then this file is run true a program to determinaded the plotting lenght on a lasercutter.
But a simple drawing takes som 80 minutes to cut and engrave.
Loading the file into X5 Home & Student is discover that the file contains 29059 lines.
Selecting some lines i can see that there are underlying lines.
How can i remove them without using VBA. And my drawing program has no option to save it to a file type.
Export it as a Atocad version 2000 or 14 doenst change the number of lines
I just printed of the design for my first t-shirt. There are faint horizontal lines, about 1/2 inch apart, thru an ellipse with a green-blue fountain fill that are not part of the design. Is this my printer, or is there something in the program that I am (not?) doing?
View 6 Replies View RelatedI know this question was posted back in 2010, but thought I would bring it back to the surface to see if anything new has developed.
I am running X4. I draw jig saw puzzles in CorelDRAW (several shapes that I andomly node-connect) and each piece overlaps adjoining pieces on all four sides and are connected at multiple corner nodes as well as arc nodes. When sending to the laser for cutting, each side of each piece gets cut twice due to the overlapping lines. I was hoping the RemoveUnderlyingDups and NodeClean macro from a 2010 post would take these overlapping lines and create individual horizontal and vertical line segments from the connected nodes so the laser would make one continuous cut rather than duplicating all the cuts.
However, after running the macros, even on a small portion of the puzzle, I didn't get any results. I combined then broke apart as mentioned and still no joy. The only way I have been able to create separate line segments is to cut apart at the nodes and delete individual line segments... on 1250 pieces, with four sides and all sides overlapping, that's 10,000 separate edits... needless to say, duplicate cutting by the laser is faster.
Ideally, being able to create continuous horizontal and vertical lines based on corner node connections, would be the best. At that point, I could cut a 1250 piece puzzle with just 50 continuous horizontal lines and 100 vertical lines.
I've used CorelDraw since v. 1, always been able to set the default font, size, color, graphic color, etc. But I cannot do this in X6.
View 6 Replies View RelatedI have a customer that send me his logo to cut some small stickers to give out at his shop. However, the logo design guy that designed the logo used shading to give the logo depth. So when i bring up the file in corel draw, there is several small lines and boxes in the logo where the different shades where located in the logo and my plotter cuts those line in the vinyl. Is there anyway to remove those lines with out having to recreate the logo?
View 4 Replies View RelatedI've playing around trying to write a macro that with the click of one button will remove all my guidelines, not hide them, delete them. I can't seem to make it work.
View 8 Replies View RelatedI need to fill the object with oblique lines of one color - strips rotated 45deg. Among them is empty, that is to be visible below the bottom (lower layer) of this texture. Somehow I can not figure out how to do it: ps textures are useless/complex and other standard off are not "leaky". So far I have dealt with manually, copy lines and trimming.
View 11 Replies View RelatedI was just going through the files for our main printed catalog, updating everything and turning individual pages into pdfs for the website, and once again ran into this anomaly. Often, photos with a white background would be processed for the pdf with a black kind of ragged edge line, appearing to be slightly offset from the actual cropping edge from DRAW. This has been an intermittent problem for as long as I can remember. I suspect Adobe is at fault, but what is the solution? I can re-crop the photo and regenerate a new pdf and sometimes that works, but not for a lot of these pics.
View 2 Replies View RelatedI have just installed Corel Draw X5 upgrading from X3. Using the program to run (2) laser engravers.
One Xenetech XLT1325 and one ULS M-300. Everything works fine until I send over a job which requires a vector cut line (hairline set to higher power to cut through plastic etc..) The vector do not appear to be recognized by either laser machine. I have tried to import the pallette that I was using in X3 but to no avail.
In X4 there was the option under the Arrange menu to Close Path with several different options like this.
In Corel X5 this option is absent. Is there something equivalent?