CorelDRAW Graphics Suite X6 :: Make A Star Rounded Object?
Oct 14, 20138004.rounded logo.pdf
how to make a star rounded object like the in the picture if im correct in uploading it
ADVERTISEMENT
CorelDRAW Graphics Suite X3 :: How To Make Lines Rounded To Look Like Wire Or Pipes
Feb 17, 2013We work on animal designs for our jewelry. We would like to make lines going around the designs like a frame that would look like a rounded wire or pipe.
Handcrafted unique jewelry created in animal, wildlife, flower and western designs.
CorelDRAW Graphics Suite X4 :: Make 1 Object Out Of Many?
Dec 27, 2011I have a logo which appears in the footers of all of our technical manuals. Word recognizes it as a picture, and so our printer prints it in color, not black and white, so we are charged for the color copies.
I have exhausted my options in Word, and have been trying to create it as a TrueType font in DRAW, so word just thinks it's a symbol, not a picture.
The only file I have of the logo is a .bmp, so I've been tracing it to get it into vector form to manipulate. However, after all of my welding, combining, front minus back ect. ect. ect., I still can't get it down to the "1 object" requirement to make it a font.
Here's the logo:
CorelDRAW Graphics Suite X5 :: How To Make Highlight (twinkle) On Object
Feb 17, 2012I am trying to replicate a jpg. This is the toe of a skate. I have purchased a new graphic and would like to put this same sparkle on the toe.
View 3 Replies View RelatedCorelDRAW Graphics Suite X5 :: Make Edge Of Coloured Object Look Frayed
Aug 16, 2011I want to make the edge of a coloured object look frayed like a pice of material.
View 5 Replies View RelatedCorelDRAW Graphics Suite X4 :: Make Object / Text Link To Another Page In Document?
Jun 1, 2012Is it possible to assign a type of link to an object or text where the user can open the document and click on the object which is on the first page and it will take them to a specified page set by the link? This is kind of like web design but not, know what I mean?
View 4 Replies View RelatedCorelDRAW X5 :: Create A Star With Rounded Edge
Apr 5, 2013Yesterday one of my friend asked me how to create star with round edge as opposed to pointed edge. Quite fascinated by his challenge I started my beloved CorelDraw and drew a star with 40 spikes at a depth of 10. Since the stars have pointed edge, I used the Filler tool to round-off the sharp edges, I was successful, but the fillet tool also rounded off the lower (inside) node. hence I failed, to create what my friend had challenged.
One option is to create a star, then painfully select only the outer nodes and use the fillet tool to round off the edges. Is there any other easy method of doing the same in CorelDraw.
( My friend apparently uses the rival program Adobe Illustrator and mocks me using CDR )
CorelDRAW Graphics Suite X6 :: How To Remove Rounded Corners For All The Rectangles At Once
Nov 18, 2012I have prepared a calender where all the rectangles are rounded cornered and now client is asking acute angles without corners how to bring back them to without corners. Since selecting each objects and using shape tool and to unround them consuming.
View 6 Replies View RelatedCorelDRAW Graphics Suite X4 :: Rounded / Radius Corners On Boxes And Rectangles
Jan 21, 2013What I do not like is that I draw a rectangle and then add the radius corners and it is fine.
If I then drag the box taller or wider the radius of the corner changes too. But also I have noticed that it does this even if you drag the box to size first then add the radius corners.
example: I make up a rectangle and add start adding text. Then I have to make the box bigger so I do that, finish adding my text. Now go to add in the radius corner and they are all skewed out of shape. This seems to be because I have dragged that rectangle bigger that what it was when I first dragged it into place.
Is there a way around this so that I can make my rectangle say 250 wide by 50 tall. Then later on change it's size and add radius corners and make it so the corners are all even and not all out of proportions?
CorelDRAW Graphics Suite X5 :: Add Contour To Simple Square With Rounded Corners
Jul 20, 2011When i tried to add an inside contour to a simple square with rounded corners......the inside contour is missing the rounded corners but when you add a contour to the outside of the square with rounded corners...the corners are round.
View 4 Replies View RelatedCorelDRAW Graphics Suite 12 :: Make Outline Color Of Object Same As Fill Color?
Dec 5, 2011I still use Corel Draw 12 and my question is is there an easy or automatic way to make the outline color of an object the same color as the fill color? I do it the hard way of trial and error until I get the right outline color from the color dock/pallette.
View 10 Replies View RelatedCorelDRAW Graphics Suite X5 :: Make Object With Straight Lines To Change Straight Line Undulated Like Curly
Apr 1, 2011Is there a way to make a object with straight lines to change the straight line to be undulated like a curly.
View 14 Replies View RelatedCorelDRAW Graphics Suite X4 :: Select Object Under Artistic Media Brush Object
Sep 17, 2011have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies View RelatedCorelDRAW Graphics Suite X6 :: Object Styles - None For A Single Object Attribute?
Dec 9, 2012Is there a way to exclude single attributes from being defined in a object style? As example: i want to define an outline that does not change width of the objects, but everything else.
There is a small tick box right of every attribute with help text "None this object attribute is not defined by a custom style" but i can not mark it. My feeling is, that i need to switch on this tick box to get the result i need, but i can not. When i click on it, it just gives me a greyed out "Revert". When i try to make child styles, there is a way to break the connection to parent style with these tick boxes, but no luck.
Is it a bug? I tried it with X6, X6.1 and X6.2
CorelDRAW Graphics Suite X4 :: Make Halftones From CDR File To Make Printing Offset Plates?
Apr 3, 2013can i make halftones from a cdr file to make printing offset plates?
View 3 Replies View RelatedCorelDRAW Graphics Suite X5 :: Cut Object Out Of Another Object
Dec 23, 2012I need to find a way to cut the shape of one object out of another object. In the above photo I need to be able to print the black crosses without the printer printing the white ink under them (you can see where the black ink is not adhering to the white ink very well).
View 11 Replies View RelatedCorelDRAW Graphics Suite X3 :: How To Measure The Outside Of Object
May 24, 2011I need to measure the circumference around the outside edge of the cut out letters.
View 5 Replies View RelatedCorelDRAW Graphics Suite X3 :: How To Create Object
Mar 10, 2011I can't remember how i created an object..how can I show you the object?
View 14 Replies View RelatedCorelDRAW Graphics Suite X6 :: How To Not Treat Object As Filled
Sep 21, 2012Where is the switch in CDR6 for toggling to only select an object per outline and not by clicking into the area. Used to be standard in the top bar.
View 5 Replies View RelatedCorelDRAW Graphics Suite X5 :: Aligning Text At Object?
Sep 15, 2011I wish to align a text like this at an oval shape. The field of the text body does align at all - which I can understand. Using the grafic text, it aligns directly on/ over the outline of the oval shape. But I won't have the whole text in a round - I just want to have the paragraph's left side to be aligned/ positioned at the outer shape of the oval.
View 4 Replies View RelatedCorelDRAW Graphics Suite X6 :: Separating Object Using Macro
Dec 12, 2013Is it possible to create a macro that would take an image made up of multiple objects and separate each object on a new page?
View 3 Replies View RelatedCorelDRAW Graphics Suite X5 :: Radius Of Curvature Of Object
Aug 6, 2011Is there a reason why the radius of curvature at the corners of an object is not maintained when you either stretch it or shrink it? Is there a way around it without having to redraw and reset the radius?
View 9 Replies View RelatedCorelDRAW Graphics Suite X5 :: Apply More Than 1 Transparency To One Object?
Feb 9, 2012I have a background image with Linear transparency applied on the top of my image. I would like to replicate the same transparency on the bottom of the image. How can I do this?
View 4 Replies View RelatedCorelDRAW Graphics Suite X5 :: Cutting Out Center Of Object
Nov 26, 2011Im trying to cut out the centre of the letter R below. Normally I break curve apart, select the centre, and trim it from the outer. I can then select the centre piece and remove it. As you can see, this has worked with the letters P & O. When I do it with the R it seems to have worked, to the point where I can even select the centre and remove it, but when I put it back over a coloured background, it is still white.
View 8 Replies View RelatedCorelDRAW Graphics Suite X5 :: Selecting Object That Has No Fill?
Oct 11, 2012I just upgraded to X5 the other day and started working with it. All seemed pretty normal until I drew a rectangle with a hairline and no fill. I typed in some text and went to click off of it to start a separate line of text only to find out when clicking inside this shape, and any other shape I made, it would select the shape.
View 8 Replies View RelatedCorelDRAW Graphics Suite X6 :: Making Object Transparent?
Jul 19, 2013I know how to use the transparency tool to make and object partially transparent but is there someway to make an entire object transparent so that what you put behind the object shows through? I am using the symbol of our logo and want to put pictures behind it so that they show though.
View 5 Replies View RelatedCorelDRAW Graphics Suite X5 :: Moving Object Up Using Shortcuts?
Mar 11, 2011in Draw X5
when I click on an object from the object manager... then I want it at the top of my drawing
so I hit Shift+PageUp
(or Ctrl+PageUp)
instead of working... it takes me to "Page 1" at the top of the object manager
HOWEVER, if I click on the thing from the canvas, it works...
this is a silly bug... the whole point of me selecting it from the object manager is so I don't have to hunt for it... because it's UNDER some other stuff.
... that's why I want it shifted to the top of the layer.
As far as I know this problem is reproducible... I'm using a circle and it's under a bunch of stuff like rectangles. I can be more specific if necessary, but it's pretty basic.
CorelDRAW Graphics Suite X6 :: Outline Width Of Object Set To 2 Mm
Nov 19, 2013I use Corel Draw X6.4 on a 64-bit Windows 7 PC, but since the first installation of Corel Draw X6 I have following problem:
I use millimeters as metric scale and when I create any object, the object manager states that the outline width of that object is set to 2 mm, but it is obvious that the width is only 0.2 mm. Now if I try to change the outline width to 1 mm, Corel draws the outline with a width of 10 mm instead and the object manager says that the width is even 100 mm. To solve that problem I always have pressed the Undo-button, so the width changes to the desired 1 mm but the object manager still tells me that the width is 10 mm.
CorelDRAW Graphics Suite X5 :: To Do Transparency All Around The Edge Of Object
May 9, 2013Is it possible to do transparency all around the edge of an object. say you had drawn a circle can you make the edge all around transparent or say make just the middle transparent?
I often find that I would love to fade out in more than one direction.
[URL]......
CorelDRAW Graphics Suite X5 :: Copying And Pasting Object?
Nov 19, 2011I have made an object using the artistic media tool and I would like to copy and paste it, however when I try and paste it into my page there is nothing there but the bounding box. How do I copy and paste this object so it can be seen?
View 8 Replies View RelatedCorelDRAW Graphics Suite X5 :: Aligning Object Along A Path?
Aug 14, 2011is there a way of aligning an object along a path? For example an elipse or an arc.
View 2 Replies View Related