If I have a render in progress and I alt tab or to premiere or open premiere/media encoder, the render in after effects wit hthe "happy ring of success" noise. but the file is incoplete and the render has stopped part way done.
OSX maveriks.
current creative cloud versions (7/2/2014)
Yesterday Ae was working perfectly. Today, Ae will not render compositions in the render queue or in AME? If I try to render from Ae,I get this error message:
and I can fin nothing about this error anywhere on line.
I have made a short film of 6 minutes (in 6 parts on after effects) I have added all the effects and the camera work on AE, but it needs a lot of editing here and there, which I find impossible to do on AE since you can't cut and join scenes like Premier pro. I need to import all these sequences onto premier pro for editing now. The problem is once I import the files, it imports in the right order in systematic folders etc, but it doesn't show any of the camera work or the special effects like gaussian blur etc. All my hard work has gone.
There must be a way you can import the after effects file on premier the way it looks on AE.
Another problem is I read some boards and it has been suggested to edit the clips first on premier and then add effects on AE but I read this really late and I've already composited the whole film on AE. I just need premier for cutting now.
P.S: I also thought about exporting the AE sequences as TGA files but there's ZERO space left in my internal hard disk for that, and it would take forever to export them all anyway. Any other kind of export would reduce the original quality which I dont want, and which I dont have space for anyway, so that option is out as well.
I found that render effects will utilize GPU and fans are working. Normally a few minutes will complete the work.
However, when I render in and out, it takes one to two hours and fans don't work as fast as when render effects, which means that render in and out is not using GPU I suppose.
Edited my footage in a sequence in normal size.
I wanted to make it widescreen, so I made a new sequence in 1920x810.
I then copy pasted my edit into the new sequence and started rendering.
The render window kept adding frames to render, and the percentage jumps and very slowly adds 0.1% into the progress.
I tried choosing a smaller amount to render, same problem still persists.
Why does it now want to render normally? Why does it add frames to render all the time?
I am wanting to render video with the H.264 codec. Then I am wanting to copy this file and place on a DVD. (No Authoring in Encore). I have done this several times and the video is choppy. The file plays normal when it is running from the hard drive.
View 4 Replies View RelatedAny MPEG2 i render in Premiere Pro CC exports in low quality (Grainy and flickers). Even at 1080p and a CBR of 20. I thought i'd wait for the next update for premiere pro CC which came out today with no luck.
[URL]
24GB of RAM
i7 X990 Processor
NVIDIA Quardro 4000
Windows 8.1
I have added closed captions to my Premiere Pro project took bloody ages and all looks and runs great within the project. Simple white captions over the video.
Although, when I render the video out with the closed captions embedded within the video, cirtain captions seem to have slightly "dodgy" formatting when played back in quick time player.
Some sections of the captions have a black background on and some do not. As I previously mentioned the captions are all fine within the project. It just seems to happen on the render file
It randomly popped up on my program window and I cannot get rid of it.
View 1 Replies View RelatedI've been having trouble lately using Warp Stabilizer in Premiere CC 7.1. I had used the effect many times successfully, then it suddenly stopped working. It analyzes the clips without problem, however it seems to get stuck on the "Stabilizing" phase. It just sits there. As I try to playback the clip in the timeline, it simply shows up as black video in the viewer. The space above the clip on the time line is yellow. I've done a full uninstall and no luck. I don't have any other problems in Premiere Pro CC 7.1 right now.
View 3 Replies View RelatedLast week, I was editing a multicam sequence (in Premiere 7.0.1) and I found it always very usefull to see the waveform. After upgrading and choosing Sequence -> Render Audio, the CTI jumps to the beginning of the timeline and starts playing and nothing more. No rendering at all.
View 14 Replies View RelatedThere seems not to be that option. I have a AE file that is 4480x192 and needs to stay this size! I have tried many converters, but they seem to diminish the quality and change the size. The program this file will be put into ONLY accepts .avi.
View 20 Replies View RelatedIm recording 1080p 30fps with my Canon t3i and it lags during the video preview. Is it possible to render the file to a different format to increase its speeds? I heard this was possible, I just transfered over from Sony Vegas, and in Vegas I didnt have much lag under 1/4 preview.
View 6 Replies View RelatedI have been working on an animation project in AE and every time I click the Add to Render Queue option it does nothing. I have tried to export it as well, to see if it would render or export and it doesn't do anything. The only thing I can do is Save Frame As. I have been working on an animation previously and was able to Add to Render Queue to render out my animation, it has only been since I added some Automated UI Scripts for pre-animated kinetic typography and for line creation that it has not allowed me to render out anything. I have checked that the scripts are in the correct Script UI folder and they are and I have tried a few other things and nothing is working, .the only thing I can think it may be is my RAM is full or there's an issue with my render settings.
View 1 Replies View RelatedI got a simple comp in after effects. Its just some text and a picture noe videos. But i do got some effects, on the text and the picture im using :
Twitch in the twitch effect manuel , i am using "Bad disortion" And im using the wiggler, in the mid of the clip.
On the text i am also using twitch. I suppose is the same , which effect it is on the text. Cause it just a effect for a really short time.
So the whole project movie its about 48 sec long. But when i render it to mov , it just renders 3 second. So i can only watch 3 seconds of my mov.
Computer specs :
Macbook pro Retina 15.
Processor : 2,3 GHz Intel Core i7
Memory : 8GB 1600Mhz DDR3
Graphics : Nvidia GeForce GT650M 1024mb
Software : OS X 10.8.3
is there any chance to render with more than two machines in CS6? Trying to install a small (non commerial) renderfarm (3 machines) I got the message that´s not possible to render with only one licence!
View 7 Replies View RelatedI'm trying to render quicktime files and recieve this - After Effects error: Rendering error while wriring to file . Unable to open file. (-1610153459)
My rig
i7 CPU 93- @ 2.800
2 x GeForce GTX 460
16 GB Ram
These are files which I've previously rendered without a hitch, this started yesterday. I've deleted folder in appdata with no success.
I would like to create simple no render animation like this one
[URL]
I can't get CS 6 to render on the farm after I installed AE CC. I did put the text file in place as described here, but this did not work:
o enable non-royalty bearing mode, place a blank file named ae_render_only_node.txt into one of the following locations, depending on the user account type:��
#Install After Effects on the render-only machine.
Footage 1080p 24fps
Win 7 Ultimate 32 bit
6GB Ram
I mostly work on my songs, they are 5 mins long the most, after adding all effect , transitions and etc, i send it to "Render Queue" to make a movie , everytime I send it to render queue to make a movie or render it, since my system is not all that , it takes about 20 hours to finish and I could watch my music video, but I was wondering if there is a short way to render my project or song, so I can b able to see the full song
The quality has to be decent, otherwise I won't be able to tell if the color correction I mde is good enough.If the final rendering takes that long, I don't mind b/c I am gonna be done with my song .Which will be a 720x480 quicktime HD.
I can't find the location of the videos I export/render on my computer. How to change the location of where to save them. I used premiere elements before I used premiere pro. The interface changed on pro and I'm falling way behind on projects.
View 14 Replies View RelatedI am trying to render and export files after using the fast color corrector. After using this effect, some, but not all of my clips don't render and the following message pops up: ERROR COMPILING MOVIE.
I saw online that this happened to ther people too and it seems like it is a bug in CS6 itself. I need to do the color correction.
it included some bad language, but that can be censored. It's nice to know Adobe only cares about their image rather than solving their users' issues with the software that they bought. No wonder people are switching sides to Avid or Apple. But that's hardly suprising in this marketing world.
Ok so basically I've been working on a project similar to all the other projects in the last months. Nothing fancy: a simple green screen keying, some added titles and a bit of Colour Correcting and audio EQ.
Everything looks fine in the project: both reference and monitor ouputs looks pefectly fine. Until the actual render is reviewed and then the **** hits the fan! I've added screenshots below. Using latest version of Premiere on OSX, only using native plugins and exporting as H.264 MP4 optimised for Vimeo streaming.
my problem; when I use the filter; 'render'- lighting effects - it will no longer save any styles-(neither mine nor the pre-sets-they are gone).
Have tried reinstalling to different directory, etc but no avail. I can add lights and all during current session, but cannot save when i try, an error message just pops up and says"
"an error occured while trying to save the style"
Just upgraded to CS2 and went to Lighting Effects assuming to find the big drop down menu of styles, but the box is blank and also when I try to save a style I have made, it comes up with an error.
Any ideas where they might have all gone?
I have created a short 4 second comp and it all plays back fine until I actually try to render it. I've tried rendering the layer on it's own in a seperate comp and it disappears then as well and just becomes a white screen, but the original one when put into a comp works fine. I've spent hours editing it and putting it in place so i really don't want to start again.
View 1 Replies View RelatedI have a Comp, which admittidely is a render nightmare, with 64 instances of a the same video each 1 frame ahead of the next. So it's very RAM hungry and something of a balancing act between the number of CPUs and how much RAM each is allowed (but generally allowing 3GB per process and 1 less CPU than suggested)
The thing that is killing me though is the RAM Preview is going almost 3x faster than a normal render. Even when the normal render destination is an SSD and compression is None. otherwise exact same settings i.e. 100%, best quality.
The really interesting part is that when doing a MP RAM preview the CPU usage (as viewed in activity monitor) is a solid wall of green but when I do a standard MP render the CPU useage is fluctuating wildly. I've tried various dififerent MP options (all maintaining a safe RAM overhead for the sysytem) with very little difference in performance.
MacPRO 2x 2.26 QuadCore, OSX10.8.3, 32GB RAM, Proavio RAID for source, internal SSD for destination.
I have created a moving background and I am rendering it in PHOTO JPEG format but when I convert it to .GIF to post it on my website, it takes away all the high quality. It is a moving background, what is the best format to render it in to post it as the website's background?
View 3 Replies View RelatedI don't know what the best practices are for rendering, but I've got settings I prefer to use, and I want to set them as a default in AE, but can't seem to find that option
First, they deprecated h.264. it's really the only valid option for rendering tight compression to be viable size for uploading. but i enabled the feature to show old formats.What I need to do is set it so it automatically defaults to my settings. it's a real pain to have to manually change that every time I render.
Also, along these lines I have a related question. Well, related sort-of.
I use Adobe Media Encoder when i can, i realize this is one reason they deprecated h.264 fronm AE. BUt what I don't get, is why I can't render anything that's GPU heavy in ME? for instance, if I use Element 3d it will utilize the cuda cores heavily in my video card. But I can't render those in ME. when I try to I get many many many many back to back errors and it finally jsut fails. I have a supported video card, though not a 'top dog' it's a GeForce GTX 770 which is plenty to tackle the work.
I've never used a Photoshop psd image in AE CS6, but yesterday I did, thinking I could tweak more easily...it's a flat (non3D) one-layer image with alpha. I dragged it into the project. The layer has some intense rotation expressions if that matters. I can work on it fine, it plays using RAM preview and I can save a portion of it as a RAM Preview Save, which is also fine. But when I render to a video file, the object disappears complete....I just get a black screen.
View 2 Replies View RelatedThe colors in my render are faded.
I have turned on the "Match Legacy After Effects Quicktime Gamma Adjustments" but it hasnt fixed the problem.
I am using AF CC