Im recording 1080p 30fps with my Canon t3i and it lags during the video preview. Is it possible to render the file to a different format to increase its speeds? I heard this was possible, I just transfered over from Sony Vegas, and in Vegas I didnt have much lag under 1/4 preview.
View 6 RepliesWhat can I do to increase render speeds? I'm getting about 400mbps on my raid. I've got a good gfx card, a ton of ram, but smoke just doesn't seem to take advantage of any of it. Watching my cpu/gpu cycles while rendering it always shows that I am using less than 25% of both. Is there a way to tell it to use everything I've got, I know in nuke, and resolve you can do something like this.
View 1 Replies View RelatedI have added closed captions to my Premiere Pro project took bloody ages and all looks and runs great within the project. Simple white captions over the video.
Although, when I render the video out with the closed captions embedded within the video, cirtain captions seem to have slightly "dodgy" formatting when played back in quick time player.
Some sections of the captions have a black background on and some do not. As I previously mentioned the captions are all fine within the project. It just seems to happen on the render file
I create short videos using the PS frame animation panel. I used to be able to FILE-export-render video- and choose MPEG-4 Video in the settings panel which would render my file into a small .mov file. Now in CS6 the new render video panel does not have that option. I tried the QT options in the export window and my file is hugh! The H.264 option gives me an .mp4. I put the .mp4 into my web page via Dreamweaver and my video does not play when uploaded into the sever. The video plays fine in Dreamweaver before I upload to the server. After I upload to the server I just get a Q and no video on my web page. If I render the same file in CS5 I am able to view it in my web page. ADOBE WHY DID YOU CHANGE YOUR EXPORT VIDEO RENDERING OPTIONS in CS6?
View 2 Replies View RelatedI have worked in Sony Vegas 9 and I was hoping Adobe Premier Pro CC was similar--- but its not. I can't figure out how to render and save a file as a windows media or mp3 or in any format for that matter.
View 4 Replies View RelatedI have a few hours of a documentary project originally recorded in S-VHS that I wish to edit it in Premiere Pro.
What would be the best video format to have it transferred to?
I am using Premier Pro CS5.5. I want to know if I can import a .mts file and use Premier to convert it, or save the file as, a .mov, .wmv, .mp4 or other video file format?
View 5 Replies View RelatedWe have an iMac workstation here running Premiere that will not open projects or import clips. Here's the sequence of events that led to this:
1. Premiere was locking up on the splash screen whenever it got to "ImporterQuicktime.bundle". I tried trashing preferences and launching with plug-ins disabled and received the same freeze. Based on forum recommendations I removed "ImporterQuicktime.bundle" and "ExporterQuickTimeHost.bundle" from the plug-ins folder inside the package. The software launched fine - but none of the Quicktime files in the project were working. So I then took copies of the above 2 files from the iMac next to this one, with the exact same configuration, and pasted them into the plug-ins folder. Since then - launching the software has generated the below errors.
2. Attempting to open any project gives a long error that starts as: The preset used by one or more sequences in this project requires third-party components that could not be located.
3. Starting a new project and attempting to drag any Quicktime ProRes media into the project gives the error: File Format not supported.
I have trashed the preferences, re-installed the Pro Apps Quicktime Codecs, de-authorized the computer and re-authorized it, and upgraded Adobe Premiere from 7.0 to 7.2. None of which fixed the issue.
I'm thinking about trying a complete re-install of Premiere next.
Here's the details:
Premiere Pro CC 7.2
Mac OS 10.8.5
iMac late 2012 model, 32Gb RAM, 2Gb video card
I need a render with good Quality, so i define the " standard render" on "presentation", and "render quality" on "5", and image size on 2500*2500, BUT the image Weight gets so low, like 500KB..
How can it be? How can i increase the quality?
I am working with a series of long movies and need to stitch them together and put timecode on them. I found that there is a limit for how many frames I can offset, which is 32,766. Is there a way to get rid of that limit?
View 3 Replies View RelatedI found that render effects will utilize GPU and fans are working. Normally a few minutes will complete the work.
However, when I render in and out, it takes one to two hours and fans don't work as fast as when render effects, which means that render in and out is not using GPU I suppose.
i bought VSP4x about a month ago to try to get back into video editing (was originally using Media Studio on my XP machine but it isn't supported on Win7) and was working fine with video acquired through the method capture -> edit - > share. but once i started bringing in videos from other sources it started going bonkers. one source i get my video from is a screen capturing program called Bandicam. it creates standard Mpeg encoded VBR AVIs. i would editing my footage cut, and snip where needed. add some text and then render. as soon as it hits 1% of rendering it will come back with a unspecified error and give me a dump files to send to tech support. i then proceed to find tech support but was unable to find any sorts on the website that wasnt going to cost me $20 just to send an email. i searched everywhere i can after that for a solution. couldnt find one.
Properties of your source files, including video, audio, image files (format, file size, where did you get it?): Program: Bandicam Files:.AVI(Mpeg encoded VRB) size:200-300MBs
What devices are involved and their mode of connection?:There are no devices.
Project Properties (important):
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
Output format (file, DVD, VCD, SVCD):Share-> upload to web-> youtube-> MP4HD 16:9
Output Properties (cogwheel in lower left of burn screen): Standard for youtube MP4 HD 16:9
PAL or NTSC: NTSC
Error Codes (if any): unspecified error code
Edited my footage in a sequence in normal size.
I wanted to make it widescreen, so I made a new sequence in 1920x810.
I then copy pasted my edit into the new sequence and started rendering.
The render window kept adding frames to render, and the percentage jumps and very slowly adds 0.1% into the progress.
I tried choosing a smaller amount to render, same problem still persists.
Why does it now want to render normally? Why does it add frames to render all the time?
If I have a render in progress and I alt tab or to premiere or open premiere/media encoder, the render in after effects wit hthe "happy ring of success" noise. but the file is incoplete and the render has stopped part way done.
OSX maveriks.
current creative cloud versions (7/2/2014)
I am wanting to render video with the H.264 codec. Then I am wanting to copy this file and place on a DVD. (No Authoring in Encore). I have done this several times and the video is choppy. The file plays normal when it is running from the hard drive.
View 4 Replies View RelatedAny MPEG2 i render in Premiere Pro CC exports in low quality (Grainy and flickers). Even at 1080p and a CBR of 20. I thought i'd wait for the next update for premiere pro CC which came out today with no luck.
[URL]
24GB of RAM
i7 X990 Processor
NVIDIA Quardro 4000
Windows 8.1
I've been experimenting with syncing audio and video in a precise way (something like URL....), and have found that in every output format except "MPEG Optimizer...", the sync is a little off... or at least different than the preview.
Through experimentation, I have found that you can be off by one frame and not really notice, but two frames and things look "amateurly" synced. Given that there is one frame leeway, I figured that rounding due to frame rate differences are accounted for, but this is not the case.
In some cases, I have also noticed transition and F/X changes, depending on the output format. For example, I have an image of a statue with "AutoSketch" applied. In the preview, everything looks wonderful. In HD MP4 output, the statue is drawn top to bottom, then the base of the statue disappears and is re-drawn. In DV and WMV format, the drawing is noticeably different, even though the resolution is the same.
What gives? If we can't count on the output to be like the preview, then all that time spent making a killer sync is just wasted
Given that it seems to be a good idea to render VSP projects to a single video file before attempting to create a DVD through Share Create Disc, I am wondering what is the most optimal type of video file to initially render the VSP into.
The video from my camera comes in a ACVHD 1080/60i. My target final disc is either 1) standard DVD, or 2) Blu Ray. I have been rendering the VSP into a 1920x1080 AVCHD format.
Sometime with some scenes, I have this trouble :
-when I render my beauty pass in TIF 16bits with render elements and when I leave MAX set my render-elements output files automatically, MAX use the initial name of the output beauty pass. So technically, It is suppose to make a couple of file with the same format and the same name.
-ok, I presse render to Backburner and I wait.
-Now my render is done, I go check my output files. And, sometimes, without constancy, my beauty pass is a TIF 16bits but my passes are in gray-scale or in 8bits or 16bits in random.
If I restart the job on Backburner, maybe it fix this problem, maybe not.
The unique thing I find to fix that is to set all my passes manually. but it's a pretty heavy process.
I have to create several large format banners (3' x 7') in a 1:1 printing ratio.
When I type in text (at approx. 145 pt type), half or more of it disappears when it is rendered. I have tried reducing the text amount by line, but that hasn't helped. I don't want to to every single word as a separate layer either.
What am I doing wrong?
I am using PS6 in a Windows XP OS and I have 2 GB of RAM.
The printer we are using specifically asks for a "Photoshop file saved as a JPEG".
I am desparate on this as I am under the gun on this project - short notice.
It seems that you can only decide on your intermediary at the point of first setting up the project? Is this true? Wouldn't it be a good (very good?) idea to be able to change this once you have embarked upon the project? It seems to me that you might want to use the ProRes codec when you are cutting and messing about with your project and then switch to DPX when you want to be careful about the quality of the render files?
Thus you may want to be creative in the render-room saving ProRes format when you can build up lots of decisions, but then switch finally over to the DPX format when you are closing in upon the final project. The current system (unless I have missed something) means that one you have chosen your intermediary render format, you are stuck in that project in that format?
TO mention Liquid for the second time today, you used to be able to right click in the timeline and switch the timeline render format (everything from dv to uncompressed). It could take any codec, frame rate and frame size but then you could decide and change your mind on the render format that you wished to use.
Smoke 2012/2013 on MacBookPro 2.6ghz i7 (mid 2012) with Nvidia650M, 16gb RAM, 768GB internal SSD, Thunderbolt Promise R6, AvidArtist MC-Color & MC-Transport, Intuos4 medium, 24in Apple Mon. Ageing 2009 Mac Pro with ATI5870, but want a 2013 one ;(
It randomly popped up on my program window and I cannot get rid of it.
View 1 Replies View RelatedI've been having trouble lately using Warp Stabilizer in Premiere CC 7.1. I had used the effect many times successfully, then it suddenly stopped working. It analyzes the clips without problem, however it seems to get stuck on the "Stabilizing" phase. It just sits there. As I try to playback the clip in the timeline, it simply shows up as black video in the viewer. The space above the clip on the time line is yellow. I've done a full uninstall and no luck. I don't have any other problems in Premiere Pro CC 7.1 right now.
View 3 Replies View RelatedLast week, I was editing a multicam sequence (in Premiere 7.0.1) and I found it always very usefull to see the waveform. After upgrading and choosing Sequence -> Render Audio, the CTI jumps to the beginning of the timeline and starts playing and nothing more. No rendering at all.
View 14 Replies View RelatedHow can I export a video from Premiere Pro CC in .mov format suitable for posting on the Amazon bookselling site?
View 2 Replies View RelatedWhat is the best export/import format for sending 3D files. I need some neutral format files, possibly Solidworks but I am not sure. Also any export settings to make sure I get decent quality files.
Nothing like getting a surface model when you want solid model.
IV2014 sp1.2 PDSU / Sim Mech 2014 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 331.82
SpacePilot Pro 3.17.1, 6.17.7, 4.11
I can't find the location of the videos I export/render on my computer. How to change the location of where to save them. I used premiere elements before I used premiere pro. The interface changed on pro and I'm falling way behind on projects.
View 14 Replies View RelatedI am trying to render and export files after using the fast color corrector. After using this effect, some, but not all of my clips don't render and the following message pops up: ERROR COMPILING MOVIE.
I saw online that this happened to ther people too and it seems like it is a bug in CS6 itself. I need to do the color correction.
it included some bad language, but that can be censored. It's nice to know Adobe only cares about their image rather than solving their users' issues with the software that they bought. No wonder people are switching sides to Avid or Apple. But that's hardly suprising in this marketing world.
Ok so basically I've been working on a project similar to all the other projects in the last months. Nothing fancy: a simple green screen keying, some added titles and a bit of Colour Correcting and audio EQ.
Everything looks fine in the project: both reference and monitor ouputs looks pefectly fine. Until the actual render is reviewed and then the **** hits the fan! I've added screenshots below. Using latest version of Premiere on OSX, only using native plugins and exporting as H.264 MP4 optimised for Vimeo streaming.
I am thinking of buying a new Sony camera (finally moving from mini-dv tape!). The HXR-NX3 records video using the AVCHD 2.0 format. Will I be able to import directly into CS 6 without doing any conversions? And will that give me HD video suitable for recording to blu-ray?
View 1 Replies View RelatedBut I've added some color correction and some of my clips seem to be rendering out corrupted once the effects are applied. If I toggle the effects off it goes away, but toggling them on again and it's back. I've restarted the machine several times and the corruption reoccurs in the same spots. Is there a cache that I need to toss? When I rerender or export the the file the corruption remains.The effects I'm using are basic, auto color, fast color corrector, and brightness & contrast. here's what it looks like.
View 2 Replies View Related