VideoStudio :: AVI Format Render Crash
Oct 14, 2011
i bought VSP4x about a month ago to try to get back into video editing (was originally using Media Studio on my XP machine but it isn't supported on Win7) and was working fine with video acquired through the method capture -> edit - > share. but once i started bringing in videos from other sources it started going bonkers. one source i get my video from is a screen capturing program called Bandicam. it creates standard Mpeg encoded VBR AVIs. i would editing my footage cut, and snip where needed. add some text and then render. as soon as it hits 1% of rendering it will come back with a unspecified error and give me a dump files to send to tech support. i then proceed to find tech support but was unable to find any sorts on the website that wasnt going to cost me $20 just to send an email. i searched everywhere i can after that for a solution. couldnt find one.
Properties of your source files, including video, audio, image files (format, file size, where did you get it?): Program: Bandicam Files:.AVI(Mpeg encoded VRB) size:200-300MBs
What devices are involved and their mode of connection?:There are no devices.
Project Properties (important):
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
Output format (file, DVD, VCD, SVCD):Share-> upload to web-> youtube-> MP4HD 16:9
Output Properties (cogwheel in lower left of burn screen): Standard for youtube MP4 HD 16:9
PAL or NTSC: NTSC
Error Codes (if any): unspecified error code
View 6 Replies
ADVERTISEMENT
Jun 19, 2011
It's an element contained in a .vsp. Right now I'm trying to "connect" & render 1 video file + 4 .vsp (inttertitle card.mp4, segment1.vsp, ... segment4.vsp). Each contains segments that run continuously and I need to combine into just one video file (mp4 HD format). But every time the render reaches that file (above) (17% of the total render), it crashes. There's nothing else on that timeline except that mp4 file and a wav file. I don't understand why it's happening. I have done it successfully before in Youtube HD format.
Smart Proxy is enabled, but I don't see how that's relevant to rendering. I have tried re-converting the video file into versions: one has .mpeg4 codec, the other has .H264. I also downloaded & installed VSPX4 SP1, updated my codecs, drivers, downgraded Quick time. But the result is still the same as far as rendering the whole project goes: crashing at 17%.
There were enough RAM & CPU when I did the rendering so I don't think this is a hardware issue. I also tried disabling Smart Render just to see if it will react positively.
There came a time also when the render passed 17%, but it crashed when it reached 94%. Interestingly, when I rendered segment1.vsp only (to mp4 HD), it also passed 17%, but then it failed to finish also. Right now, I'm going to re-convert the file to a different format to see if the whole crash is related to mp4 (I have rendered many mp4s just last week and they were successful).
So I'm curious, is there a limit to how many "connected" .vsp files one can render successfully? And is there a certain mp4 type that VSP can't handle properly?
View 5 Replies
View Related
Aug 4, 2009
Video Studeo Pro X3 crashes when starting to render. This forum will not let me upload the .DMP file.
View 12 Replies
View Related
Jun 23, 2013
Video Studeo Pro X3 crashes when starting to render. This forum will not let me upload the .DMP file.
vstudio_1.6.2.21_20130623_141428.DMP 940KB
View 5 Replies
View Related
Oct 5, 2010
I've been experimenting with syncing audio and video in a precise way (something like URL....), and have found that in every output format except "MPEG Optimizer...", the sync is a little off... or at least different than the preview.
Through experimentation, I have found that you can be off by one frame and not really notice, but two frames and things look "amateurly" synced. Given that there is one frame leeway, I figured that rounding due to frame rate differences are accounted for, but this is not the case.
In some cases, I have also noticed transition and F/X changes, depending on the output format. For example, I have an image of a statue with "AutoSketch" applied. In the preview, everything looks wonderful. In HD MP4 output, the statue is drawn top to bottom, then the base of the statue disappears and is re-drawn. In DV and WMV format, the drawing is noticeably different, even though the resolution is the same.
What gives? If we can't count on the output to be like the preview, then all that time spent making a killer sync is just wasted
View 2 Replies
View Related
Jul 30, 2012
Given that it seems to be a good idea to render VSP projects to a single video file before attempting to create a DVD through Share Create Disc, I am wondering what is the most optimal type of video file to initially render the VSP into.
The video from my camera comes in a ACVHD 1080/60i. My target final disc is either 1) standard DVD, or 2) Blu Ray. I have been rendering the VSP into a 1920x1080 AVCHD format.
View 1 Replies
View Related
Mar 22, 2011
I got a few render boxes, the older ones (mix of XP and win7) are generally fine.The new machines however fall over (crash with `unhandled exception`) while network rendering through backburner. This has the effect that 3dsMax `hangs` i.e waits for you to remote login and click `cclose program` (this may be a windows message though)This effectively removes the machine friom render slave mode as it hangs until max is manually closed.
Either i need to find out why they`re crashing and stop it or a way to make max crash and auto shut down/reboot max/backburner or even a machine restart would do.
(again, the error is ridiculously vague. windows 7 64bit is up to date as is max2011).i just checked and it`s windows thats crashed, asking to sened info to microsoft.
View 9 Replies
View Related
Aug 31, 2011
Sometime with some scenes, I have this trouble :
-when I render my beauty pass in TIF 16bits with render elements and when I leave MAX set my render-elements output files automatically, MAX use the initial name of the output beauty pass. So technically, It is suppose to make a couple of file with the same format and the same name.
-ok, I presse render to Backburner and I wait.
-Now my render is done, I go check my output files. And, sometimes, without constancy, my beauty pass is a TIF 16bits but my passes are in gray-scale or in 8bits or 16bits in random.
If I restart the job on Backburner, maybe it fix this problem, maybe not.
The unique thing I find to fix that is to set all my passes manually. but it's a pretty heavy process.
View 2 Replies
View Related
Feb 8, 2014
I have added closed captions to my Premiere Pro project took bloody ages and all looks and runs great within the project. Simple white captions over the video.
Although, when I render the video out with the closed captions embedded within the video, cirtain captions seem to have slightly "dodgy" formatting when played back in quick time player.
Some sections of the captions have a black background on and some do not. As I previously mentioned the captions are all fine within the project. It just seems to happen on the render file
View 1 Replies
View Related
Apr 13, 2006
I have to create several large format banners (3' x 7') in a 1:1 printing ratio.
When I type in text (at approx. 145 pt type), half or more of it disappears when it is rendered. I have tried reducing the text amount by line, but that hasn't helped. I don't want to to every single word as a separate layer either.
What am I doing wrong?
I am using PS6 in a Windows XP OS and I have 2 GB of RAM.
The printer we are using specifically asks for a "Photoshop file saved as a JPEG".
I am desparate on this as I am under the gun on this project - short notice.
View 2 Replies
View Related
Jun 14, 2012
It seems that you can only decide on your intermediary at the point of first setting up the project? Is this true? Wouldn't it be a good (very good?) idea to be able to change this once you have embarked upon the project? It seems to me that you might want to use the ProRes codec when you are cutting and messing about with your project and then switch to DPX when you want to be careful about the quality of the render files?
Thus you may want to be creative in the render-room saving ProRes format when you can build up lots of decisions, but then switch finally over to the DPX format when you are closing in upon the final project. The current system (unless I have missed something) means that one you have chosen your intermediary render format, you are stuck in that project in that format?
TO mention Liquid for the second time today, you used to be able to right click in the timeline and switch the timeline render format (everything from dv to uncompressed). It could take any codec, frame rate and frame size but then you could decide and change your mind on the render format that you wished to use.
Smoke 2012/2013 on MacBookPro 2.6ghz i7 (mid 2012) with Nvidia650M, 16gb RAM, 768GB internal SSD, Thunderbolt Promise R6, AvidArtist MC-Color & MC-Transport, Intuos4 medium, 24in Apple Mon. Ageing 2009 Mac Pro with ATI5870, but want a 2013 one ;(
View 3 Replies
View Related
Apr 5, 2014
Im recording 1080p 30fps with my Canon t3i and it lags during the video preview. Is it possible to render the file to a different format to increase its speeds? I heard this was possible, I just transfered over from Sony Vegas, and in Vegas I didnt have much lag under 1/4 preview.
View 6 Replies
View Related
Dec 26, 2011
I'm having with x3 when I import MOV files from an IPhone 4s onto an HP pavillion dv7 4270us laptop with 4 gb, 1.80ghz.
The playback is very choppy and almost paralyzed, while the audio does fine.Also, x3 constantly shuts down with a brief error message telling me to contact corel support.
Should I be converting these video clips before I import them into my capture folder on corel?
I'm trying to preserve quality since the iphone4s takes a pretty nice video, definitely rivals my canon dv and most HD flip cams I've seen.
View 2 Replies
View Related
May 2, 2010
I am trying to encode to BluRay a compilation of Canon 5D2 HD video plus some stills (shrunk to about 1000x800 pixels). This has the Canon audio track plus some background music from mp3 files. When I try to encode it runs for about an hour and then crashes. The problem report data says vstudio.exe has crashed with the fault module CoreAudioToolbox.dll. A bit of digging says CoreAudioToolbox may be to do with Quicktime so I have done a clean install of that but still have the same problem.
View 13 Replies
View Related
Dec 5, 2012
I create short videos using the PS frame animation panel. I used to be able to FILE-export-render video- and choose MPEG-4 Video in the settings panel which would render my file into a small .mov file. Now in CS6 the new render video panel does not have that option. I tried the QT options in the export window and my file is hugh! The H.264 option gives me an .mp4. I put the .mp4 into my web page via Dreamweaver and my video does not play when uploaded into the sever. The video plays fine in Dreamweaver before I upload to the server. After I upload to the server I just get a Q and no video on my web page. If I render the same file in CS5 I am able to view it in my web page. ADOBE WHY DID YOU CHANGE YOUR EXPORT VIDEO RENDERING OPTIONS in CS6?
View 2 Replies
View Related
May 2, 2012
I tried twice to close a project (in VS PRO X3) but the program stuck and a message appear (you can see it in the attached file).
View 1 Replies
View Related
Aug 29, 2011
my problem to Corel e-mail support but after all the work for filling out the form the website showed my a message after submission of the form that the requested page changed its location - nice! After using the back button of the browser (to try it again) all form fields were empty again.
So I am trying here before returning the product. I am using Videostudio Pro X4 with the Sevice Pack 1 and no more updates are found by the internal updater.
I try to import videos from my Sony HC96E MiniDV cam using FireWire. I am importing into a Lenovo ThinkPad system with Core i7 2nd Gen and 8 GB RAM. First of all when using the program's DV Quick Scan method I can see no preview picture in the preview area. Also I here the video's sound for about 1 sec and then it stops. I can use the PLAY, STOP, FF, RW etc. buttons and they control the camera as usual with FireWire and MiniDV cams. But: As soon as I start the importing process with Quick Scan or the normal Rec-Mode Videostudio crashes. Nothing happens - trying to use any of the programs buttons and controls only leads to Windows telling me that this application no longer answers and has to be closed.
This happens all the time. I haven't been able to import a single scene from the MiniDV tape, yet. I also tried another legacy firewire driver but this didn't improve the situation at all. For a test I also installed Windows Live Movie Maker 2011. With this program everything works perfectly: preview is there with sound and importing of the whole 60 mins tape worked flawlessly.
View 8 Replies
View Related
Mar 13, 2013
I have VS Pro x5 and if I try to use DV quick scan, I get an error message saying :-
"Corel Video Studio Pro The program has encountered an unspecified error and has stopped functioning. Please contact Corel Technical Support and send the dump file for analysis." Followed by the path and file name of the dump file.Windows then closes the program and "attempts to find a solution" No contact details are given in the error message. From the Corel web site it appears completely impossible to contact technical support. I just keep going around in circles to faqs and knowlege bases.
View 10 Replies
View Related
May 21, 2013
I had installed Corel Videostudio pro X5 on my laptop which has 64 bit WIN 8 and was working fine . Dues to system error which had nothing to do with the VS X5 , I had to reinstall Videostudio X5. Now it is crashing upon restart with some error that has to do with Changing the Environment (this error stays on for lass than one s second and closes itself so I cannot read complete error message)
View 1 Replies
View Related
Oct 16, 2011
i first creat mp4 file with "upload to web" 1280-720.now i want to make a dvd with this file . i press share-creat disc-dvd and when the file insert the vs4 crash. i record it here [URL]
View 3 Replies
View Related
Feb 18, 2011
I am using VS10 to edit old VCR tapes and burn to DVDs. I have edited the video with out too many problems and I wanted to add some audio voiceover narration to the video.
As soon as I click "start recording", the program freezes and the PC crashes so that I have to manually switch the machine off to recover the situation.
By the way, I have been able to add background music tracks without any problems at all.
View 4 Replies
View Related
Feb 25, 2011
I purchased VS X3 on Feb 5, 2010 as an upgrade to X2. I did not try before buying (my bad), I just read the feature list and it sounded good so I plunked down my dough. VS X3, although well meaning is an albatross. No matter what was tried, I was never able to successfully burn a DVD using the authoring module supplied. I have continuing program crash problems when working with mixed content, apparently caused by the transitions between them. For instance just two days ago I was making a short video with AVCHD and some still JPEGs Putting certain transitions between the media causes VS X3 to crash when reviewing and/or rendering. Remove the transition and it goes ok. This behavior is ongoing with X3 and very annoying. So I downloaded the trial of X4 and opened the exact project that was giving me fits earlier this week and guess what? Low and behold it actually works as expected.
My point to all this rambling you may be wondering? IMO X4 offers painfully little in new features and is more of a patched up version of X3 that actually works. Imagine that concept.No more editing in X3 and authoring in X2 for me that is if I plunk down another 80 bucks. I feel a bit put off by my whole X3 experience and feel X4 should be offered to us who bought the POS, non working X3 for free as a good will gesture or something. X4 mostly appears to be a debugged version of X3. Let me qualify these feelings by stating I haven't had a chance to work with X4 enough to be sure it's better, but my comments are going under that assumption. It's hard to think it could function overall worse than X3 does.
View 14 Replies
View Related
Sep 13, 2012
I have WINDOWS 7 on a toughbook and vx4 and I will try to SHARE>CREATE VIDEO FILE> MPEG and it will start to render and get to around 90-99% and then the render box goes away and the files won't be made. This used to happen once in a while and i woul just run it again and it would work, sometimes I would try to render as a different kind of file but now I can't get it to render anything. The box simply disappears after 90%.
View 3 Replies
View Related
May 3, 2013
I've just got an iPhone 4S and shot a test video to edit. However, when I load it and try to create a file, VS10+ crashes every time within a few seconds.
All I'm doing is trying add a few simple titles with the output file being 'same as project settings' so the output should be mpg4, PAL, 720 x 576. This is the first time I've tried editing iPhone video and I've never had this problem with any stuff that I've edited in the past.
View 4 Replies
View Related
May 5, 2013
I am running XP and X5 Ultimate.My workflow follows :
File
Insert media file to library
Insert Digital media
Select drive in import from digital media box
Start
Then the screen goes black and the PC reboots with an error report box showing. The DVD has a UDF file system and it is 2.32GB and plays in Power DVD OK.
View 2 Replies
View Related
Oct 6, 2013
i found once the UVSX6 crash while editing burning disk, it will never enter the 'output to disk' dialog again for existing projects.
View 3 Replies
View Related
Mar 14, 2011
I had the x3 trial. Then bought the x4. And uninstalled x3 first.
X3 worked fine, but X4 crashes
( 50% of other cpu and reading
vstudio.exeFASTIO_QUERY_OPENC:Documents and SettingsUserMy DocumentsCorel VideoStudio Pro14.0SYSERSUCCESS
and
vstudio.exeFASTIO_QUERY_OPEND:Program FilesCorelCorel VideoStudio Pro X4en-USkernel32.dllSUCCESS)
It crashes every time when I click the Transition -> My Favorities (dropdown)
specs: xp sp3, 4gb ram, core 2 duo, ssd, directX 9.0C (4.09.00000.0904)
I might have installed some transition effects etc. that the app advertises in the start. how to remove them?
View 1 Replies
View Related
Dec 2, 2010
Sometimes I can get it to do a Batch Convert without crashing. Sometimes.
It will always crash when I drag an MTS into the timeline.
View 4 Replies
View Related
Jul 8, 2013
I have registered my product. When I log in, I see it in the list.I have no "Support code".I have spent 20 minutes trying to figure out how to send them the dump that the program says I should send them so they can find their problem.
In general, I'm very happy with CVS. I've used X5 and just bought X6. So I'm not a whiner.Get it together for support.When you put so many roadblocks in the way of sending you a bug report, you reduce the quality of your product.If you are going to have such a difficult support policy, then the program should have sent the dump automatically to you.
View 3 Replies
View Related
Feb 6, 2012
when i want to create video file in pro x4 the program crash, i reanstall the program and i stiil have the same problem.
View 3 Replies
View Related
Jan 12, 2012
1. I did read somewhere else (I can't find it now-by Ron P, I think) that for video editing, the computer must be of quite a high spec.
For the first time, the capture managed to do 70% of the DV tape. But now it wont do it. Is it my PC? (spec provided from Belarc report)
View 7 Replies
View Related
