I am using VS10 to edit old VCR tapes and burn to DVDs. I have edited the video with out too many problems and I wanted to add some audio voiceover narration to the video.
As soon as I click "start recording", the program freezes and the PC crashes so that I have to manually switch the machine off to recover the situation.
By the way, I have been able to add background music tracks without any problems at all.
I produced a 4-track project which contains video, video-overlay, background music and a voiceover narration. I produced it in high-def.Everything plays on a pc and on a tablet but when played on a mobile device the narration is not heard.
I have made several projects this way and everytime I go to play the video on a cell phone you cannot hear my narration.
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
I'm having with x3 when I import MOV files from an IPhone 4s onto an HP pavillion dv7 4270us laptop with 4 gb, 1.80ghz.
The playback is very choppy and almost paralyzed, while the audio does fine.Also, x3 constantly shuts down with a brief error message telling me to contact corel support.
Should I be converting these video clips before I import them into my capture folder on corel?
I'm trying to preserve quality since the iphone4s takes a pretty nice video, definitely rivals my canon dv and most HD flip cams I've seen.
It's an element contained in a .vsp. Right now I'm trying to "connect" & render 1 video file + 4 .vsp (inttertitle card.mp4, segment1.vsp, ... segment4.vsp). Each contains segments that run continuously and I need to combine into just one video file (mp4 HD format). But every time the render reaches that file (above) (17% of the total render), it crashes. There's nothing else on that timeline except that mp4 file and a wav file. I don't understand why it's happening. I have done it successfully before in Youtube HD format.
Smart Proxy is enabled, but I don't see how that's relevant to rendering. I have tried re-converting the video file into versions: one has .mpeg4 codec, the other has .H264. I also downloaded & installed VSPX4 SP1, updated my codecs, drivers, downgraded Quick time. But the result is still the same as far as rendering the whole project goes: crashing at 17%.
There were enough RAM & CPU when I did the rendering so I don't think this is a hardware issue. I also tried disabling Smart Render just to see if it will react positively.
There came a time also when the render passed 17%, but it crashed when it reached 94%. Interestingly, when I rendered segment1.vsp only (to mp4 HD), it also passed 17%, but then it failed to finish also. Right now, I'm going to re-convert the file to a different format to see if the whole crash is related to mp4 (I have rendered many mp4s just last week and they were successful).
So I'm curious, is there a limit to how many "connected" .vsp files one can render successfully? And is there a certain mp4 type that VSP can't handle properly?
I am trying to encode to BluRay a compilation of Canon 5D2 HD video plus some stills (shrunk to about 1000x800 pixels). This has the Canon audio track plus some background music from mp3 files. When I try to encode it runs for about an hour and then crashes. The problem report data says vstudio.exe has crashed with the fault module CoreAudioToolbox.dll. A bit of digging says CoreAudioToolbox may be to do with Quicktime so I have done a clean install of that but still have the same problem.
View 13 Replies View RelatedI tried twice to close a project (in VS PRO X3) but the program stuck and a message appear (you can see it in the attached file).
View 1 Replies View Relatedmy problem to Corel e-mail support but after all the work for filling out the form the website showed my a message after submission of the form that the requested page changed its location - nice! After using the back button of the browser (to try it again) all form fields were empty again.
So I am trying here before returning the product. I am using Videostudio Pro X4 with the Sevice Pack 1 and no more updates are found by the internal updater.
I try to import videos from my Sony HC96E MiniDV cam using FireWire. I am importing into a Lenovo ThinkPad system with Core i7 2nd Gen and 8 GB RAM. First of all when using the program's DV Quick Scan method I can see no preview picture in the preview area. Also I here the video's sound for about 1 sec and then it stops. I can use the PLAY, STOP, FF, RW etc. buttons and they control the camera as usual with FireWire and MiniDV cams. But: As soon as I start the importing process with Quick Scan or the normal Rec-Mode Videostudio crashes. Nothing happens - trying to use any of the programs buttons and controls only leads to Windows telling me that this application no longer answers and has to be closed.
This happens all the time. I haven't been able to import a single scene from the MiniDV tape, yet. I also tried another legacy firewire driver but this didn't improve the situation at all. For a test I also installed Windows Live Movie Maker 2011. With this program everything works perfectly: preview is there with sound and importing of the whole 60 mins tape worked flawlessly.
Video Studeo Pro X3 crashes when starting to render. This forum will not let me upload the .DMP file.
View 12 Replies View RelatedI have VS Pro x5 and if I try to use DV quick scan, I get an error message saying :-
"Corel Video Studio Pro The program has encountered an unspecified error and has stopped functioning. Please contact Corel Technical Support and send the dump file for analysis." Followed by the path and file name of the dump file.Windows then closes the program and "attempts to find a solution" No contact details are given in the error message. From the Corel web site it appears completely impossible to contact technical support. I just keep going around in circles to faqs and knowlege bases.
Video Studeo Pro X3 crashes when starting to render. This forum will not let me upload the .DMP file.
vstudio_1.6.2.21_20130623_141428.DMP 940KB
I had installed Corel Videostudio pro X5 on my laptop which has 64 bit WIN 8 and was working fine . Dues to system error which had nothing to do with the VS X5 , I had to reinstall Videostudio X5. Now it is crashing upon restart with some error that has to do with Changing the Environment (this error stays on for lass than one s second and closes itself so I cannot read complete error message)
View 1 Replies View Relatedi first creat mp4 file with "upload to web" 1280-720.now i want to make a dvd with this file . i press share-creat disc-dvd and when the file insert the vs4 crash. i record it here [URL]
View 3 Replies View Relatedi bought VSP4x about a month ago to try to get back into video editing (was originally using Media Studio on my XP machine but it isn't supported on Win7) and was working fine with video acquired through the method capture -> edit - > share. but once i started bringing in videos from other sources it started going bonkers. one source i get my video from is a screen capturing program called Bandicam. it creates standard Mpeg encoded VBR AVIs. i would editing my footage cut, and snip where needed. add some text and then render. as soon as it hits 1% of rendering it will come back with a unspecified error and give me a dump files to send to tech support. i then proceed to find tech support but was unable to find any sorts on the website that wasnt going to cost me $20 just to send an email. i searched everywhere i can after that for a solution. couldnt find one.
Properties of your source files, including video, audio, image files (format, file size, where did you get it?): Program: Bandicam Files:.AVI(Mpeg encoded VRB) size:200-300MBs
What devices are involved and their mode of connection?:There are no devices.
Project Properties (important):
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
Output format (file, DVD, VCD, SVCD):Share-> upload to web-> youtube-> MP4HD 16:9
Output Properties (cogwheel in lower left of burn screen): Standard for youtube MP4 HD 16:9
PAL or NTSC: NTSC
Error Codes (if any): unspecified error code
I purchased VS X3 on Feb 5, 2010 as an upgrade to X2. I did not try before buying (my bad), I just read the feature list and it sounded good so I plunked down my dough. VS X3, although well meaning is an albatross. No matter what was tried, I was never able to successfully burn a DVD using the authoring module supplied. I have continuing program crash problems when working with mixed content, apparently caused by the transitions between them. For instance just two days ago I was making a short video with AVCHD and some still JPEGs Putting certain transitions between the media causes VS X3 to crash when reviewing and/or rendering. Remove the transition and it goes ok. This behavior is ongoing with X3 and very annoying. So I downloaded the trial of X4 and opened the exact project that was giving me fits earlier this week and guess what? Low and behold it actually works as expected.
My point to all this rambling you may be wondering? IMO X4 offers painfully little in new features and is more of a patched up version of X3 that actually works. Imagine that concept.No more editing in X3 and authoring in X2 for me that is if I plunk down another 80 bucks. I feel a bit put off by my whole X3 experience and feel X4 should be offered to us who bought the POS, non working X3 for free as a good will gesture or something. X4 mostly appears to be a debugged version of X3. Let me qualify these feelings by stating I haven't had a chance to work with X4 enough to be sure it's better, but my comments are going under that assumption. It's hard to think it could function overall worse than X3 does.
I've just got an iPhone 4S and shot a test video to edit. However, when I load it and try to create a file, VS10+ crashes every time within a few seconds.
All I'm doing is trying add a few simple titles with the output file being 'same as project settings' so the output should be mpg4, PAL, 720 x 576. This is the first time I've tried editing iPhone video and I've never had this problem with any stuff that I've edited in the past.
I am running XP and X5 Ultimate.My workflow follows :
File
Insert media file to library
Insert Digital media
Select drive in import from digital media box
Start
Then the screen goes black and the PC reboots with an error report box showing. The DVD has a UDF file system and it is 2.32GB and plays in Power DVD OK.
i found once the UVSX6 crash while editing burning disk, it will never enter the 'output to disk' dialog again for existing projects.
View 3 Replies View RelatedI had the x3 trial. Then bought the x4. And uninstalled x3 first.
X3 worked fine, but X4 crashes
( 50% of other cpu and reading
vstudio.exeFASTIO_QUERY_OPENC:Documents and SettingsUserMy DocumentsCorel VideoStudio Pro14.0SYSERSUCCESS
and
vstudio.exeFASTIO_QUERY_OPEND:Program FilesCorelCorel VideoStudio Pro X4en-USkernel32.dllSUCCESS)
It crashes every time when I click the Transition -> My Favorities (dropdown)
specs: xp sp3, 4gb ram, core 2 duo, ssd, directX 9.0C (4.09.00000.0904)
I might have installed some transition effects etc. that the app advertises in the start. how to remove them?
Sometimes I can get it to do a Batch Convert without crashing. Sometimes.
It will always crash when I drag an MTS into the timeline.
I have registered my product. When I log in, I see it in the list.I have no "Support code".I have spent 20 minutes trying to figure out how to send them the dump that the program says I should send them so they can find their problem.
In general, I'm very happy with CVS. I've used X5 and just bought X6. So I'm not a whiner.Get it together for support.When you put so many roadblocks in the way of sending you a bug report, you reduce the quality of your product.If you are going to have such a difficult support policy, then the program should have sent the dump automatically to you.
when i want to create video file in pro x4 the program crash, i reanstall the program and i stiil have the same problem.
View 3 Replies View Related1. I did read somewhere else (I can't find it now-by Ron P, I think) that for video editing, the computer must be of quite a high spec.
For the first time, the capture managed to do 70% of the DV tape. But now it wont do it. Is it my PC? (spec provided from Belarc report)
I have on .avi video file from friend, that I can play OK with sound in VLan player, I just installed X3 and tried to make DVD from it and got it without sound, same thing if I play this loaded .avi in X3, don't have any sound ? Is there any secret encoding I have to look for ? Somebody told me that X3 will eat any format.
I"m running W7 with trial X3?
I am having a problem with way slow audio in Ulead Videostudio 11.5 plus. I know it's an older version, but the format is similar or the same for some of the programs and maybe someone else has had that issue on even a new software version.
I managed to make some music videos with the software, after going to Youtube, as the manual for the software really isn't that great in all honesty. it simply doesn't tell you much detail on doing things. Putting in a music track to the video clips and then turning the sound on each clip all the way down wasn't a problem, but now that I want to do a normal video-I'm finding the sound in the virtual clip or whatever(which I recorded into my digital camera-mov. files), plays like Jabba the Hut off Starwars!
What do I do here to make it sound normal and be able to edit properly and share it in normal sound?I tried splitting the audio and then it sounded normal, BUT it still had that nasty slow sound on the audio. No matter if you mute it or pull the sound down in the video/audio clips in editing. How do I get rid of that slow sound or change it to make it right? Do I even need to split audio there?
So I go to edit some video and now all of a sudden there is no sound/audio playback in any of my clips. The files are fine. They play fine in other software, and in other editing software as well. But this is the my software of preference and I can't use it. WHAT THE HELL HAPPENED. The same thing has also happened to my DVD Workshop 2 software. And the same thing happened to at least 3 previous versions of VideoStudio. Everything works great and then one day BAM, no audio. The data is there because if I go ahead and render it again and play the new file on something else the audio is still there. So the problem is only on Corel/Ulead products. As a matter of fact I just downloaded the VS X3 demo. I cannot find anything about it online anywhere. If I cannot figure this out I am NEVER going to buy another Corel/Ulead product again. And I am a longtime user, way back to version 3 or 4. And for some idiotic reason I keep buying the new versions.
View 1 Replies View RelatedI tried to provide as much information in the subject line as possible. I have been keeping my VS installations up to date and so I have VS X6 installed on Windows 8.1. I just purchased a new Sony HDR-CX290 camcorder. I have transferred 3 or 4 video files from the camera to my computer using the Sony transfer software which saves it as a *.m2ts file. VS X6 can open the files, I can place it in my timeline. I can run the split by scene and other edit utilities. I even have gone through the process to test and create a disc without any issue. However, if I try to PLAY the clip in the project window, VS x6 crashes. I have uninstalled, rebooted, and reinstalled VS x6. I have tried reinstalling codecs. The files play without any issue in Nero and Windows Media player. Windows Movie Maker seems to open the files without issues as well. However, I have had my system to make discs via VS for a while now so I would prefer to not have to use a different program. Especially since I have invested in VS x6. I am outside my warranty window so from the sounds of it, I have no recourse to let Corel know if this is a bug or a known issue. I have installed VS X6 SP1 as well and it hasn't fixed the issue.
View 9 Replies View RelatedI want to render a video that consists of two parts: A small intro (8 sec) and a video (~2min). I want to render it on iPhone 4/iPad HD (720p). Now, after rendering the intro (~9%) the program crashes with the message "Corel VideoStudio Pro X4 doesn't respond..." System Specs in profile.
View 2 Replies View RelatedI upgraded to VS X4 SP1 having successfully used its predecessors for many years. However, I now cannot burn a DVD as it fails in the Converting Video of the title (001/001] step.
My clips are captured by firewire from a Sony camcorder in DVI format. In this project I am using transitions, moving menus, 12 chapters and titles extensively.
My workflow is as follows: Share, Create Disc, DVD, Use first clip as introductory video is unchecked (patched dll file for Unknown Error installed), use Smart Scene Menu, Burn. Timeline is 1:26:54:22 so I select Yes to fit to DVD. PC crashes anywhere between 6 and 18 minutes later. Do not convert compliant MPEG files is checked.
I have tried various other things and can successfully burn a video under 30 min on the timeline without and transitions, chapters or menus.
My project properties are Microsoft AVI, PAL 25fps, 24 bits, 720x576, 4:3, Lower Field First, DV Video Encoder - type1
Clip properties are the same with 32000kHz, 12 bit Stereo audio as per attached file.
The converting video of the title step takes up to 30 min to complete for a 20 - 30 minute project, so seems like a proportionally high time of total job.
For some reason I can upload an mp4 video files into the Video Studio, but as soon as I want to work with it the program crashes down, announcing an unknown mistake. Is there any way to prevent this?
View 3 Replies View RelatedI didn't have any problems with transition effect, but suddenly,some effects, like flip album and the ProDad plugin are causing VS to hang and not respond: flip album is causing the hang just after the automatic preview (can't turn this off) and just clicking on the ProDad plugin is freezing VS. They are also causing the rendering process to hang (turned off smart rendering as well).I've reinstalled the software wituhout SP2 and still the problem persists.No matter what kind of media I insert before or after the transitions, the problem is the same.I assume there is some kind of incompatibilty between VS and some OS/driver update - any way to know for sure?
View 14 Replies View Related