I want to render a video that consists of two parts: A small intro (8 sec) and a video (~2min). I want to render it on iPhone 4/iPad HD (720p). Now, after rendering the intro (~9%) the program crashes with the message "Corel VideoStudio Pro X4 doesn't respond..." System Specs in profile.
View 2 RepliesHow do I export my video to 720p mp4 file format?
I can't find the option. In fact I can't find many options. The custom settings are not very custom really as the choice is very limited or none.
Bought VS X4 last week cause I had problems with X3... And now I really wonder why the hell I bought X4... cause I keep having the same problems.
I've tried calling Corel today and I can only get support if I buy a support card. I just got this program and I would like some purchase support or something. Cause I have this program since Saturday.
Anyhow... It never crashes, only with rendering. First it didn't crash if I rendered it in a lower resolution, but I want the highest resolution, I'm on art school and I need to show it in big on a screen.
Anyhow, with the somewhat lower resolution it didn't crash, but now it also crashes on the lower resolution.
I heard people having the problem with X3, like I had, and they had to remove all apple products. So I did, and trying it now...
I am having a difficult time Exporting my 640 X 360 Video In an Mpeg Format, I am making a YouTube Video in 640 X 360 ( 360P I believe the size is called ) only because that is what my source video size is. My original source video is " AVI - 30Fps " I have cut and fine tuned my 8 Second Video that took me 8+ hrs to figure out how to make
Under the Project Properties there are 2 format types available, MPEG and AVI. Under MPEG Project Options --> General, I have only 4 sizes to choose from in the frame size box, 720 x 480 - 704 X 480 - 352 X 480 - 352 X 240, And the user defined selection bullet is GREYED out.
Is it possible that because im using the trial version that I just cannot fully use the software, If so then I can go back and install my VideoStudio X4, I was hoping to Upgrade to X5 because I can directly import my Paint Shop Pro Layers as well as CorelDRAW too.
I was trying to 'create a video file' when I received this message, 'Ulead VideoStudio [2000:1:1] Failed to open the MPEG encoder.
I've made countless movies and this is the first time I'm having this problem. Maybe I had it in 2008, but I've just turned 70 and remembering what I did then is a thing of the past!
Error message:
"Failed to open MPEG encoder".
I'm using Ulead VideoStudio 11+ and when I try to render a completed video to a file I receive this error message. The video is a little large, one hour fourteen minutes, so I cut it in half, saving it under a different name and it still gave me the same error message. However, if I render a very small clip then it renders as it's suppose to.
I've never had this trouble before. I reloaded the software for 11+ but that didn't work.
I purchased VS X3 on Feb 5, 2010 as an upgrade to X2. I did not try before buying (my bad), I just read the feature list and it sounded good so I plunked down my dough. VS X3, although well meaning is an albatross. No matter what was tried, I was never able to successfully burn a DVD using the authoring module supplied. I have continuing program crash problems when working with mixed content, apparently caused by the transitions between them. For instance just two days ago I was making a short video with AVCHD and some still JPEGs Putting certain transitions between the media causes VS X3 to crash when reviewing and/or rendering. Remove the transition and it goes ok. This behavior is ongoing with X3 and very annoying. So I downloaded the trial of X4 and opened the exact project that was giving me fits earlier this week and guess what? Low and behold it actually works as expected.
My point to all this rambling you may be wondering? IMO X4 offers painfully little in new features and is more of a patched up version of X3 that actually works. Imagine that concept.No more editing in X3 and authoring in X2 for me that is if I plunk down another 80 bucks. I feel a bit put off by my whole X3 experience and feel X4 should be offered to us who bought the POS, non working X3 for free as a good will gesture or something. X4 mostly appears to be a debugged version of X3. Let me qualify these feelings by stating I haven't had a chance to work with X4 enough to be sure it's better, but my comments are going under that assumption. It's hard to think it could function overall worse than X3 does.
I've just got an iPhone 4S and shot a test video to edit. However, when I load it and try to create a file, VS10+ crashes every time within a few seconds.
All I'm doing is trying add a few simple titles with the output file being 'same as project settings' so the output should be mpg4, PAL, 720 x 576. This is the first time I've tried editing iPhone video and I've never had this problem with any stuff that I've edited in the past.
I have registered my product. When I log in, I see it in the list.I have no "Support code".I have spent 20 minutes trying to figure out how to send them the dump that the program says I should send them so they can find their problem.
In general, I'm very happy with CVS. I've used X5 and just bought X6. So I'm not a whiner.Get it together for support.When you put so many roadblocks in the way of sending you a bug report, you reduce the quality of your product.If you are going to have such a difficult support policy, then the program should have sent the dump automatically to you.
when i want to create video file in pro x4 the program crash, i reanstall the program and i stiil have the same problem.
View 3 Replies View Related1. I did read somewhere else (I can't find it now-by Ron P, I think) that for video editing, the computer must be of quite a high spec.
For the first time, the capture managed to do 70% of the DV tape. But now it wont do it. Is it my PC? (spec provided from Belarc report)
I have a GoProHD Hero camera, I've been recording stuff mainly in 960p at 30fps because that's all my computer can handle at the moment.
My main problem is that I lose the HD part of the video after edit and render the video in VideoStudio X3. The file type is MPEG4, when I render the final project, I set it to save as the same file type, at 1280x720p with a data rate of 5Mbps all in the H.264 MAIN codec mainly for Youtube uploading purposes.
If I were to upload the raw footage directly to Youtube, it's in true HD and uses the full width of the player when played at 720p. However, when I upload the final project to Youtube even when set to play in HD (720p) it is only in letterbox format.
Am I rendering my projects incorrectly? Why does it keep doing this? Is it some sort of file compression issue or something? I'm pretty new to the whole video editing platform, I'm pretty much learning on my own.
I put together some vacation photos in a slideshow. What is the difference in rendering them in "DVD Video" or "DVD Slideshow"? Don't they both do the same thing?
View 2 Replies View RelatedHow to save a transparent video that I can use as a overlay in Proshow Producer?
View 1 Replies View RelatedI upgraded to VS X4 SP1 having successfully used its predecessors for many years. However, I now cannot burn a DVD as it fails in the Converting Video of the title (001/001] step.
My clips are captured by firewire from a Sony camcorder in DVI format. In this project I am using transitions, moving menus, 12 chapters and titles extensively.
My workflow is as follows: Share, Create Disc, DVD, Use first clip as introductory video is unchecked (patched dll file for Unknown Error installed), use Smart Scene Menu, Burn. Timeline is 1:26:54:22 so I select Yes to fit to DVD. PC crashes anywhere between 6 and 18 minutes later. Do not convert compliant MPEG files is checked.
I have tried various other things and can successfully burn a video under 30 min on the timeline without and transitions, chapters or menus.
My project properties are Microsoft AVI, PAL 25fps, 24 bits, 720x576, 4:3, Lower Field First, DV Video Encoder - type1
Clip properties are the same with 32000kHz, 12 bit Stereo audio as per attached file.
The converting video of the title step takes up to 30 min to complete for a 20 - 30 minute project, so seems like a proportionally high time of total job.
For some reason I can upload an mp4 video files into the Video Studio, but as soon as I want to work with it the program crashes down, announcing an unknown mistake. Is there any way to prevent this?
View 3 Replies View RelatedI am using Video StudioPro X4 and rendering a video that is about 15 minutes when it stops at 4% complete, showing the following words: Cannot read audio (0x80004005). Other numbers on the message are: (18300:8000:192). Is there a way to know why it will not continue rendering and/or which audio files to check?
View 3 Replies View RelatedFirst, some glitches (short freeze frame) at video transitions. Usually at the end of the transition. I could upload some samples... The problem persist in both : hardware or software accelerated mode.
Also, when i want to create a video file and i use the "same as first video clip" even the project is a HDV 1440x1080 format, the video is created as DVD 720x576 4:3 aspect.
my video and audio to synchronize after rendering. About end of last year when I first brought this issue, I was made to believe that I do not have a “good” or “powerful” enough system to handle what I was doing.
View 14 Replies View RelatedI've acquired the Corel Video Studio Pro x4 recently, and across an unplesant problem shortly after instalation. The "create video file" makes the program crash every time i press it.
View 3 Replies View RelatedI have just taken some short video clips and put them together in a 3min 40 second video. When I tried to save it to my desktop the rendering took a little over an hour. This is my first try so I am really a newbie Is it normal to take that long to render? I was planning on making 20 to 40 minute videos but at an hour for every 3 minutes it may not work.
View 3 Replies View RelatedI am using VSX5 and after rendering a project of video, where I have added transitions and titles, the video image is not as clear as it was before I rendered.
I have captured the footage from a mini dv camera using firewire, or, someone else has captured the video footage on a dvd using a dvd burner and given me the dvd to import into VSX5. Sometimes VSX5 will not read that dvd for import, so I have used freemake video converter, and converted the dvd into an mpeg file and put it in a folder on my computer where VSX5 "grabs" it. During the edit phase, the video is clear, after render, it loses some of it's clarity and is blurry.
This has not always been the case. The only thing that has changed with VSX5 is I installed sp2.
I'm using the trial version of CVS X4 and have been impressed so far, but have come into a problem that I have seen others post here, but it's not 100% identical to my problem.
I'm able to view each clip individually without any playback problem upon capture. However, once I drop a clip into the timeline, the clip experiences a very slight but noticeable bit of stuttering/jumping/hiccuping every so many seconds during playback on the timeline. I was hoping that this might have just been occurring in preview mode, but after creating a video file, the problem still exists. This footage was captured using a Flip camera.
I've posted a 1 minute sample on Youtube at [URL] ...... You'll notice while viewing an opening pan of the Welcome sign and footage of the columns the issue I'm inquiring about. I find it very strange that this especially noticeable when a scene is being panned.
Screen Shot CVS Jumping.jpg (39.95 KiB) Viewed 615 times
I'm using Corel VS x5. I want to make 720p .mp4 videos but I can't. Why would Corel disable User-Defined for .mp4?
View 3 Replies View RelatedI'm seeing random occurrences of single all-red frames in my output. They seem to occur in the middle of a clip.
My clips are AVCHD (HDV captures from a Sony HDR-FX7 via Firewire using HDVSplit). I'm outputting them to "HDV 720p - 30p (for PC)". Total edited projects are 9-10 minutes each and I'm seeing 2-3 of these "red frames" per output file.
i want to know if their is a solution for files MOV H264 60 fps, because when i previsualize clib : no probleme, and in project windows the sound is correct but video completly slow. I have the same probleme on vs x3 and vs x5 ultimate... in the publicity of vs x5 ultimate it is write that input video h264, quicktime, but i think it is ONLY in 30 fps ! but not in 50/60 fps ! i wait answer from corel.. because the technical support said this input isn't supported in vs x5 !
View 4 Replies View RelatedThe 720p avi files on my toshiba camileo s20 are not recognized by my VS pro x2. VS will not capture them either from the camera or from the sd card. It does recognize the files on the sd card and shows a thumbnail, but when I try to capture them it says it cannot do so.
I can capture the files using windows 7 moviemaker but the avi files are still not recognized by vs even though windows movie maker has no trouble with them and treats them like any avi file. I have made a dvd with windows mm using those files.
VS does handle sd avi files from my JVC camcorder but no joy with the Toshiba. I have both the 1 and 2 updates for vs x2.
When I try and render my 23 minute project to WMV HD 720p it gets to 6% and says file reading error.
View 11 Replies View RelatedWhy I can not import MPEG-2 video file into PH CS 6?
View 3 Replies View RelatedIs it possible to load a MPEG-2 TS-video (.ts) file in the Program Adobe Photoshop Element 10, until now the program refuse to load such a file and do not recognize is. I have some films loaded from satellite TV and like to remove the commercials, that is the reason that i buy this program.
View 1 Replies View RelatedMPEG video captured from a tape based camcorder in premiere cs5 will not import into lightroom 4.3. Why, when it is created in an adobe product?
View 15 Replies View Related